On Tue, 5 Jun 2007, richard martin wrote:
We installed a nagios client in our oracle 10g server in Linux and we are
monitoring it using a
nagios server.
CHECK_NRPE: Socket timeout after 20 seconds.
Run tcpdump on both sides with a sensible filter. Then you can tell if
your traffic
Hi.. We are monitoring our URL using nagios, when there is a problem with the
URL, we will get the
problem alert email and when it recover,we get the recovery email too. But for
one particular
problem alert, we always don't get the recovery email. I checked on the
maillog , it doesn't have
at
Hi,
I need to configure many linux and solaris clients to be monitored by
Nagios server.
This will take a lot of time. Can anyone suggest me a shell script which
will solve the purpose.
As we know the main steps involved are-
Adding user and group Nagios.
Logging in as Nagios.
Installing
Hello List,
Can anyone tell me if Nagios has the ability to
limit the view of a
specific node or group
of nodes to specific users?
In other words if you have divisions in your
company and want to have a
specific set of users
only be able to view/manipulate node that are in
their division.
On 6/6/07, Stephen Clark [EMAIL PROTECTED] wrote:
Hello List,
Can anyone tell me if Nagios has the ability to
limit the view of a
specific node or group
of nodes to specific users?
This is basically the default function. If folks aren't listed as
contacts, they don't have access to see
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Stephen Clark
Sent: Wednesday, June 06, 2007 7:05 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] limit view of specific nodes to specific users
Hello List,
Can
I've done this in a slightly easier way in that my deployment script
installs the nrpe stuff and also pushes one standard config to it so
that it works instantly.
I think that may be something you may want to do, since it saves you the
bits at the end.
Some plugins aren't relevent, but then
Since you've asked, here is my xinetd file for nrpe:
service nrpe
{
flags = REUSE
socket_type = stream
wait= no
user= nagiosuser
server = /path/to/nrpe
Hi there,
I have an interesting requirement to fulfill. I have about 100 passive
only service checks that need to be reset (currently to Unknown state)
at a specified time of day (currently midnight). The reason they need
this done is to be able to easily tell if the passive checks have
occured
Hi,
VER:Nagios 2.8
Just had another unexpected issue come up. I clicked on one of my hosts
and set Enable notifications on all services for this host. Now even
if in the service template definition active checks are disabled for
some/all of those services, active checks still run. At first I
-xr-x 1 root root 3032 Apr 13 16:18 check_snmp_openvz.sh
grazie
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Fai squillare la PANTERA ROSA sul tuo cellulare: e' in REGALO
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=6613d=20070606
usually when this kind of weirdness is going on you have separate 2
instances of nagios running, perhaps one has checks disabled but the
other has checks enabled.
I would close all nagios instances and start a new one and see if the
problem persists.
beyond that I would suspect a bug. I am
Hi All,
I'm trying to setup an eventhandler but it seems that it is never being
called/executed. I have been over my configs with a fine-tooth comb,
and I just can't figure this out. Here are my configs:
misccommands.cfg:
define command{
command_namerestart_test.sh
You have mislabeled your event handler in miscommands.cfg.
The command_name should be restart_test, not restart_test.sh as you
are calling restart_test without the .sh ending in your event_handler
definition in services.cfg.
-h
Hari Sekhon
Kurt Ramsden wrote:
Hi All,
I'm trying to
why are my notifications disabled when I add new hosts?
I have to manually enable notifications for each host.
Nagios 3.0a3
TIA..
Looking for earth-friendly autos?
Browse Top Cars by Green Rating at
I'm trying to setup an eventhandler but it seems that it is
never being called/executed. I have been over my configs
with a fine-tooth comb, and I just can't figure this out.
Here are my configs:
[snip]
at this point, all I have in restart_test.sh is this (I
cannot get any output
are you using a host template that has the notifications disabled?
On 6/6/07, abid dar [EMAIL PROTECTED] wrote:
why are my notifications disabled when I add new hosts?
I have to manually enable notifications for each host.
Nagios 3.0a3
TIA..
Ok, just in case anyone come across the same thing, it seems like it is a bug.
I'll state it here but also, where do I log such bugs so that the developers
are aware of them?
What I had to do to temporarily alleviate the problem was to comment out any
definition that used or had anythign to do
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Sapon, Dimitry
Sent: Wednesday, June 06, 2007 11:50 AM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Active Checks Issue - Still run even
whendisabled
It seems
Hi Nagios Users,
I'm migrating my Nagios monitoring setup from three standalone Nagios
servers to a Distributed/Central configuration. In a past job, I had
written some fancy rsync/perl scripts to push the configs to Central,
whack them up, and then restart the nagios daemon on Central to
Marc,
Gotcha, thanks. I missed that part of the documentation when looking for
this. One question then is, once you enter into this state where
notstatus information is retained, how do you get out of it? Do you have
to disable/enable the retain_nonstatus_information directive and restart
Nagios?
I just realized I don't have to use NSCA to do this at all. I rewrote my script
to simply push the information it gets from Nagios back to Nagios. In case
anyone needs to configure something similar, below is my setup:
SCRIPT
-
#!/bin/bash
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Sapon, Dimitry
Sent: Wednesday, June 06, 2007 12:44 PM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Active Checks Issue - Still run even
whendisabled
Marc,
Unfortunately all the archives appear to be inaccessible to me.
Otherwise I would have
searched. Since I cannot access either of them I will proceed with my
specific issue.
I am attempting to compile Nagios 2.9 on an HP-UX 11 machine.
I began working on this and was informed that one of the
Hi to all,
I have been trying to find out how you get the graphs for monitored service
on Windows/Nsclient++.
It is working fine for the locahost (FC9) Memory, load, procs and users. I
added a windows machine with NSClient++, I added the service Ping to both
localhost and the windows machine,
hi all,
I have installed nagios and its working ok. There are these services which are
nttp, http, ssh, mysql and athers whose plugins are installed and check
commands configured. However when monitoring the status is unknown and
Information status says Usage:check_udp -H host -p port [-w ]
Rita H. Agbali wrote:
[...] However when monitoring the
status is unknown and Information status says Usage:check_udp -H host -p
port [-w ] [-c ] [-s ]. Someone please help me fix this problem.
You're likely either passing a -h (note the case difference between -H
and -h) or you're not
Palle Jensen wrote:
Hi to all,
Hej:)
I have been trying to find out how you get the graphs for monitored
service on Windows/Nsclient++.
It is working fine for the locahost (FC9) Memory, load, procs and users.
I added a windows machine with NSClient++, I added the service Ping to
both
Le mercredi 06 juin 2007 à 17:10 +0200, [EMAIL PROTECTED] a écrit :
hi
i have install nagios and plugin in ubuntu linux-box (work it)
knows you tutorial or howto to config nagios and snmp??? (step by step)
i install plugin but i not have /usr/local/nagios/libexec/check_snmp
i have only this
apt-get install snmp
test, using snmpwalk and snmpget
there's also a good Nagios plugin for querying windows servers,
check_snmp_win, have a look on Nagios Exchange.
Of course this assumes you want simple snmp checking and not traps, or agents.
On 6/7/07, Raphael SurcouF Bordet [EMAIL
If any of you have nagios server configured that does 500+
(or even better at 1000+) service checks per minute can you
share tips and problems you may have seen when trying to get
it to this performance. Thanks.
--
William Leibzon
Elan Networks
[EMAIL PROTECTED]
Hi all.
I'm setting up a new nagios server and I just can't seem to get it to notify
me. Right now, I'd even be happy to get notified by email, but I've got
nothing. The service checks to turn red and green as expected, though.
Here is a typical contacts definition:
Hi all,
I'm currently upgrading our Nagios monitoring system from v1.1 to v2.9
and I notice that the hostgroupescalation functions that we were
previously using no longer exist in v2.9.
I've read through the docs of serviceescalation and hostescalation and
there's one thing that remains unclear
33 matches
Mail list logo