configure this point ASAP.
ASAP and free community support are not really compatible terms. If
you had a contract with me, and I had an obligation to help you then
ASAP might have a meaning here.
--
Regards,
Giles Coochey, CCNP, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 8444 780677
+44 (0) 7983 877438
answer:
repo.ngtech.co.il canonical name = proxy.treenet.co.nz.
proxy.treenet.co.nz canonical name = cairo.treenetnz.com.
cairo.treenetnz.com has address 2002:3a1c:99e9:0:230:f1ff:fe14:5d47
--
Regards,
Giles Coochey, CCNP, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 8444 780677
+44 (0) 7983
On 31/07/2013 16:21, Kaushal Shriyan wrote:
On Sun, Jul 28, 2013 at 1:27 PM, Giles Coochey gi...@coochey.net
mailto:gi...@coochey.net wrote:
On 27/07/2013 10:38, Kaushal Shriyan wrote:
On Fri, Jul 26, 2013 at 8:03 PM, Kaushal Shriyan
kaushalshri...@gmail.com
on the command line as the
nagios user?
--
Regards,
Giles Coochey, CCNP, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 8444 780677
+44 (0) 7983 877438
http://www.coochey.net
http://www.netsecspec.co.uk
gi...@coochey.net
smime.p7s
Description: S/MIME Cryptographic Signature
be greatly appreciated.
I get this shortly after a NTP client has booted up. Once NTP has been
running for a while it goes away.
--
Regards,
Giles Coochey, CCNP, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 7983 877438
http://www.coochey.net
http://www.netsecspec.co.uk
gi...@coochey.net
smime.p7s
/debug
information than when just user secretary is logged in Nagios web.
Is that somehow possible?
You probably just want a different web front-end altogether for
secretary... search around for different Nagios Front-Ends.
--
Regards,
Giles Coochey, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 7983
(-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
--
Regards,
Giles Coochey, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 7983 877438
http://www.coochey.net
http://www.netsecspec.co.uk
gi...@coochey.net
smime.p7s
Description: S/MIME
and
create a rule for that particular access.
There are no shortcuts, not secure ones anyway (e.g. trust your
monitoring system implicitly across your entire network).
--
Regards,
Giles Coochey, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 7983 877438
http://www.netsecspec.co.uk
giles.cooc...@netsecspec.co.uk
-v) and OS when reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
--
Regards,
Giles Coochey, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 7983 877438
http://www.coochey.net
http://www.netsecspec.co.uk
gi...@coochey.net
smime.p7s
Descripti
/libmysqlclient.so.16
/usr/lib64/mysql/libmysqlclient.so.16.0.0
/usr/lib64/mysql/libmysqlclient_r.so
/usr/lib64/mysql/libmysqlclient_r.so.16
/usr/lib64/mysql/libmysqlclient_r.so.16.0.0
[root@mgmt1 ~]#
--
Regards,
Giles Coochey, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 7983 877438
http://www.coochey.net
http
: Ac0sdhy95mbOFeZ/TfuR7Pqyo+E6LQ==
In-Reply-To:011701cd2c3b$a12b6240$e38226c0$@it.net
--
Best Regards,
Giles Coochey, CCNA Security, CCNA
NetSecSpec Ltd
giles.cooc...@netsecspec.co.uk
Tel: +44 (0) 7983 877 438
Live Messenger: gi...@coochey.net
http://www.netsecspec.co.uk
http://www.coochey.net
On 2012-02-01 15:04, Marco Borsani wrote:
Hi all
To send
sms notifications, I am using since 2003 a couple of radiomodem,
connected via serial to my server and smstools SW.
Now, I need
something stronger compared that configuration because for specific
checks I have to send many and
, it's a much easier solution than running a bank of SMS gateways
yourself.
On 2012-02-01 15:53, Marco Borsani wrote:
How does it
work with Nagios ?
DA: Giles Coochey [mailto:gi...@coochey.net]
INVIATO: mercoledì 1 febbraio 2012 16:39
A:
nagios-users@lists.sourceforge.net
OGGETTO: Re
On 2012-01-24 14:00, Perfors, Henny wrote:
We've a Windows 2008
server with DHCP role. There is an option to display the statics of the
scope.
Total Addresses ..
In Use .. %
Available ..%
Is it possible to gt these information available in Nagios.
Please advise.
On 2012-01-24 14:36, C. Bensend wrote:
We've a Windows 2008 server with DHCP role. There is an option to
display
the statics of the scope.
Total Addresses ..
In Use .. %
Available ..%
Is it possible to gt these information available in Nagios.
I haven't had much luck with this.
On Wed, January 11, 2012 05:19, GODDY MUGO wrote:
Hi,
I am new to Nagios and would like assistance on how to configure my Nagios
installed in Fedora 15, to monitor
the flow of HL7 data and their ports and also monitor DICOM in my network,
and last to have it send mail notifications.
Hi,
I am monitoring a website, and I sometimes get two types of error:
One is:
CRITICAL - Socket timeout after 10 seconds
and the other is:
HTTP CRITICAL - No data received from host
What is the difference between the two errors? Is it the case that the
HTTP CRITICAL error connected to the
On Wed, October 26, 2011 10:28, Gian Karlo wrote:
Hi everyone. I would like to evaluate OpenNMS but I would like to ask if
if
the features that I am looking is supported out-of-the-box. Thank you.
Wrong list... try the OpenNMS list.
On Mon, May 16, 2011 16:01, Matty Sarro wrote:
Weird, I just reinstalled the plugins and I still don't see
check_mysql_query or check_mysql. This is installing from source
following the quickstart guide.
You may need some mysql devel packages on your system?
On 01/04/2011 01:48, khurram aziz wrote:
Can you share configurations here cauz i am not really in da mood of
buying books at the moment :)
Are you in 'da mood' of paying a consultant to do it for you?
--
Best Regards,
Giles Coochey
NetSecSpec Ltd
NL T-Systems Mobile: +31 681 265 086
NL
On 28/02/2011 13:51, Anand, Sakshi wrote:
All,
I am getting following error when configuring MRTG. I want to use it
to measure bandwidth using Nagios.
This seems like a MRTG problem, have you tried asking the MRTG Mailing
list, or posting on the MRTG Web Forums?
--
Best Regards,
Giles
documentation.
Anyone got any ideas??
Have I messed up the syntax??
Have you tried --eregi=ok
?
--
Best Regards,
Giles Coochey
NetSecSpec Ltd
NL T-Systems Mobile: +31 681 265 086
NL Mobile: +31 626 508 131
GIB Mobile: +350 5401 6693
Email/MSN/Live Messenger: gi...@coochey.net
Skype
capture to verify
this is the case and research another method of monitoring syslog, it
could be a passive check to see how old the latest logs in your syslog
are with a use of MARK entries in the syslog to ensure it's refreshed
from time to time.
--
Best Regards,
Giles Coochey
NetSecSpec Ltd
NL
you'd
get that error...
--
Best Regards,
Giles Coochey
NetSecSpec Ltd
NL T-Systems Mobile: +31 681 265 086
NL Mobile: +31 626 508 131
GIB Mobile: +350 5401 6693
Email/MSN/Live Messenger: gi...@coochey.net
Skype: gilescoochey
smime.p7s
Description: S/MIME Cryptographic Signature
user, or the user
that nagios runs as have write access to the /home/libor directory?
--
Best Regards,
Giles Coochey
NetSecSpec Ltd
NL T-Systems Mobile: +31 681 265 086
NL Mobile: +31 626 508 131
GIB Mobile: +350 5401 6693
Email/MSN/Live Messenger: gi...@coochey.net
Skype: gilescoochey
-set of your
notifications (Priority-1 systems for instance).
--
Best Regards,
Giles Coochey
NetSecSpec Ltd
NL T-Systems Mobile: +31 681 265 086
NL Mobile: +31 626 508 131
GIB Mobile: +350 5401 6693
Email/MSN/Live Messenger: gi...@coochey.net
Skype: gilescoochey
smime.p7s
Description: S/MIME
On Tue, October 12, 2010 16:38, Max Hetrick wrote:
On 10/12/2010 07:56 AM, Kristan Webb wrote:
Hi All,
Hopefully an easy query.
We run Nagios 3 on an Ubuntu box and I'm looking for a way to stop
Nagios falsely reporting services/hosts as down/unknown if, for example,
the network cable was
This would best be covered by the Support channels for Net-SNMP (if installing
from source), or your Operating System support channels.
It is not really a Nagios issue, simply a pre-requisite for check_snmp.
From: [EMAIL PROTECTED] [mailto:[EMAIL
Did you try restarting or reloading the Nagios process?
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: 02 April 2008 09:59
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Help : Unable to see any Host
I think you will need to do some research here:
SNMP : http://www.oreilly.com/catalog/esnmp/
Cisco MIB Browser:
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=ensubstep=2t
ranslate=Translatetree=NO
There is no hard and fast answer, it depends exactly what on that switch
you
Pallav, why don't you just google for this?
I don't think many on this list appreciate being your personal search engine.
None of us get paid for our advice on this list, and there are plenty out there
who are happy to get paid for this type of consultancy.
This link seems to have much
Firstly, the tests you show as examples appear to be working just fine
(though note it appears you are running them as root, so you won't know
what happens when they're run as the Nagios user).
Secondly, you should check what the notification options are for your
contacts and the service.
A little off-topic, but those using both Cacti and Nagios may have some
interest in this thread:
http://forums.cacti.net/about25930-0.html
Disclaimer: I have made most of the posts on this thread.
-
Check out the new
I stand corrected... must be Friday :-(
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: 14 March 2008 15:49
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Antwort: View - Update every 90 seconds
Cgiutils.h
DEFAULT_REFRESH_RATE
Then recompile
Can only be changed through source recompilation as far as I know.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marco Borsani
Sent: 14 March 2008 15:46
To:
I see 2.11 is released...
Has anyone worked out how to get to the Changelog, since the Nagios.org
site changed the download pages?
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual
Hi Guys,
How can I use nagios to monitor if there are any errors on my cisco
routers i.e. CRC errors, frame-relay or any sort of errors we have on
the routers.
snmp
-
This SF.net email is sponsored by: Microsoft
TIP: If you make your configuration a CVS or SVN repository then you
would be able to track exactly what configuration change you made that
caused this problem.
It might be related by your Nagios system unable to send emails, it
might be caused by updates resulting in a change of paths to your
Any specific OID to monitor. Please give me an example
All detailed in the IF-MIB
Get the Interface MIB and walk your cisco for the OIDs
RFC2020 (20-20 eyesight required for that one or google)
-
This SF.net email is
This is expected behavior. I'm curious, what kind of environment are
you
in when up to 5 minute delay in notification of recovery is
'substantial'?
Hi Marc,
I know I'm not the target of your question, but...
Some require 5 figure uptime reports for their SLAs, and a 99.999% SLA
is often
I stopped and started the httpd service.
Is it actually running?
Linux:
ps -aux | grep httpd
Solaris:
ps -ef | grep httpd
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio
Giles,
It is running because I have MRTG running on the same server and I can
browse to the graphs.
OK, nice, I forgot you mentioned that.
Still looks like an apache problem, I assume you are using a virtual
host / host header type set up. And that would need to be checked.
When Nagios has
Giles,
Isn't there supposed to be a Nagios folder under /var/www/html? If so
it isn't there any more.
Mike,
That would depend on installation.
You might have something like:
Alias /nagios /path/to/nagios/share
In your http.conf which will make it work at whatever path as long as
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Alex Dehaini
Sent: 05 March 2008 12:33
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Monitoring Unix servers CPU, memory and
hard-disk
Hi Guys,
What plugin can I
Also, check_load and check_procs doesn't tell you the memory that is
used or the memory that is free. What plugin can I use for that?
Check out
http://www.nagiosexchange.org/Linux.55.0.html?tx_netnagext_pi1[p_view]=
1149
Note that UNIX systems have different memory management systems and
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Melanie Pfefer
Sent: 05 March 2008 16:01
To: Hari Sekhon; James E. Pratt
Cc: Nagios Users
Subject: Re: [Nagios-users] Monitoring Unix servers CPU, memory and
hard-
disk
check_load
Hi,
Have you actually got any services defined?
Thanks
Giles
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Klaus
Sent: 04 March 2008 10:44
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Problem with Service Escalation
What is $USER7$ macro? In your resource.conf?
Likely to be the Community string, as that is what resource.conf is generally
for.
check_snmp_mem.pl -H 41.211.3.218 $USER7$ communitystring -w -I -c 80 98
Is what your command translates too, which wouldn't work.
I've used NC_Net for this. It has most of your metrics built in and can
also check specific Windows Services.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alex
Dehaini
Sent: 04 March 2008 11:55
To: nagios-users@lists.sourceforge.net
Subject:
André,
I had no idea what you were talking about, but I typed nagiosweb into google
and clicked I'm feeling lucky, the text on the resulting page read:
http://sourceforge.net/project/screenshots.php?group_id=78920 A PHP/MySQL
based front-end for Nagios 2.x setup. Complete with the
Bhat,
Can we suggest that you try following the instructions found under
http://nagios.sourceforge.net/docs/nrpe/NRPE.pdf
And then return to us with a specific query as to any problem that you
may encounter?
Otherwise, your request is very vague and is more likened to a request
for
G,
When I installed NRPE recently I used the xinetd installation, whereas
it looks like you're utilising the nrpe in daemon mode.
Therefore I may not be of as much help here, but I would check things
such as SeLinux configuration (try putting it in warn mode and see
whether you still get
Andy,
I thought I'd take a look at your project, as I have some interest in having
some sort of dynamic portal which customers can query and I've seen your
project surface time-and-time again on this list.
I've implemented the 'hack' to limit which hosts a particular user can see, but
notice
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Luis Fernando Lacayo
Sent: 13 February 2008 16:23
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Question about the time stamp on the log file.
Good Morning (relative)
I do the following for HSRP:
define command{
command_namecheck-hsrp
command_line$USER1$/check_snmp -H $HOSTADDRESS$ -P 2c -C
$ARG1$ -o SNMPv2-SMI::enterprises.9.9.106.1.2.1.1.13.$ARG2$ -s
'IpAddress: $ARG3$'
}
$ARG1$ is community
$ARG2$ is the
This works fine for me:
define command{
command_namecheck_ospf
command_line$USER1$/check_ospf -H $HOSTADDRESS$ -C
snmp-community
}
Generally, running the plugin as the Nagios user, or using the -h
parameter to show the help page will explain the usage of each
Hi List,
As part of our Internet Connectivity monitoring I monitor a set of
websites on the Internet from a diverse number of locations
geographically.
There are some issues with this:
(a) I have to avoid sites that use Content Delivery Systems such as
Akamai, because as we host such boxes
I have fixed the problem. I had to enable check_external_command=1
in
nagios.cfg. After that, everything worked.
I'd say that's a bizarre and non-obvious resolution. I don't
understand
how the error you posted would be related. Interesting...
Indeed it is, thankfully it's in the
11:12
To: Giles Coochey; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Internet Connectivity Monitoring
We monitor our upstream provider core routers. Basically, we monitor
every physical device between us and them. So, if any device goes down,
we can tell where the problem
On Jan 25, 2008, at 2:54 AM, Giles Coochey wrote:
Hi List,
As part of our Internet Connectivity monitoring I monitor a set of
websites on the Internet from a diverse number of locations
geographically.
(c) I have to avoid sites which might get pretty annoyed that I'm
pulling
Me no hablo espanol...
Maybe you could try and ask in english. Then more people will be able to
understand you.
Hi, they're trying to get events from their Microsoft ISA Server and they're
getting the error shown. They've opened the port and set up the rules for both
incoming and
Yes,
Much out there, google is your friend :-)
http://www.google.com/search?hl=enq=check_ospf+nagios
Personally we use this one:
http://www.nagiosexchange.org/Networking.53.0.html?tx_netnagext_pi1[p_v
iew]=754tx_netnagext_pi1[page]=60%3A10
From:
http://www.nagvis.org/docs/general/often_reported_errors#nagiosnotrunning
From: Alex Dehaini [mailto:[EMAIL PROTECTED]
Sent: 24 January 2008 15:34
To: Giles Coochey; nagios-users@lists.sourceforge.net
Subject: nagvis error nagvis
I keep getting
NagVis setup, so I am not sure whether that error is the
actual cause of your problem.
From: Alex Dehaini [mailto:[EMAIL PROTECTED]
Sent: 24 January 2008 15:43
To: Giles Coochey; nagios-users@lists.sourceforge.net
Subject: Re: nagvis error nagvis
I have
you just delete the database and ndodaemon back to work ?
I have to run the db installation script that comes with ndoutils to
recreate the db schema.
if you use postgresql? same problem ??
Is postgresql support actually working? I found conflicting information
as to whether it would work
Hi,
Under host commands there is a Locate host on map option, at least
there is with the nuvola style.
The URI is:
/nagios/cgi-bin/statusmap.cgi?host=hostnamelayout=1max_width=0max_hei
ght=0proximity_width=1000proximity_height=800layermode=exclude
Replace hostname with the name of
? If so you may need to rebuild extinfo.cgi.
Thanks
Giles
From: Alex Dehaini [mailto:[EMAIL PROTECTED]
Sent: 22 January 2008 12:26
To: Giles Coochey; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Go to map button
Giles,
The Locate
of the
Nagios list.
Thanks
Giles
From: Alex Dehaini [mailto:[EMAIL PROTECTED]
Sent: 22 January 2008 12:44
To: Giles Coochey; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Go to map button
Giles.
I migrated to a new installation. I
List,
Today our NDOUtils broker...broke. I'm not entirely sure what
happened,
but I can tell you what is going on and what I've done...
Nagios 2.10, 1.4.10 plugs on Ubuntu 7.10
This has been fine for about 3 months now.
Today however, we started seeing some issues with the daemon.
There's no auto discovery in Nagios.
This is indeed the case, while at first it may seem as a major drawback
to the software, given time, you will realise that it's one of its best
features.
The effort you place into making Nagios work for you is the reason for
its value. If you look at
on your system.
On Jan 18, 2008 1:54 PM, Alex Dehaini [EMAIL PROTECTED] wrote:
H
Could it be a debian problem then?
On Jan 18, 2008 1:53 PM, Giles Coochey [EMAIL PROTECTED] wrote:
While not answering your question I have Centos with mysql 5.0.22
running ndoutils just fine
While not answering your question I have Centos with mysql 5.0.22
running ndoutils just fine.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alex
Dehaini
Sent: 18 January 2008 14:51
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users]
As far as I am aware, NagVis requires the data in a database, via NDO
and there is no easy way to bypass this requirement.
It causes some pain for me too, I 'need' the 'nice' visuals that NagVis
produces, but the instability of NDO is a real pain.
From:
Have you checked the FAQ:
http://www.nagios.org/faqs/viewfaq.php?faq_id=119
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of riky.none
Sent: 07 January 2008 13:59
To: Nagios Users Mailinglist
Subject: [Nagios-users] The requested URL
/nagios/cgi-bin/statusmap.cgi
was not found on this server
hi i install nagios 3 in ubuntu 710 server WITH libg2 (apt-get
install
libg2-dev)
i read information :Get Nagios 3.0 up and running in 15 minutes
flat!
No baloney. Read the quickstart.
Can anyone help me ?
I'd like to monitor a specific proxy service (Blue Coat) and I don't
know
if Nagios works with different mibs.
Anybody knows a good tip about that ?
My Tip #1: I recommend using numerical OIDs with check_snmp. That way
you don't have to have the MIB loaded anywhere.
From: Hugo Rebello [mailto:[EMAIL PROTECTED]
Sent: 18 December 2007 12:33
To: Giles Coochey
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Monitoring using MIBs
Could you send me an example of snmpwalk command ?
Thank you.
Hugo
You could try sending a passive check result to put it back into an
OK state.
Mmmm... I've read the Nagios documentation about passive check but yet
I
do not know very clearly how to use it to put the status back into an
OK
state. What is your suggestion?
Submitting a passive check
Hello Everyone,
Is anyone out there in NAGIOS land monitoring UPSes? If so what is the
best way of monitoring them? Can you share your Checkcommand to do
this?
thanks,
Luis
It's never a good idea to hijack someone else's thread for a completely
unrelated post, more so if you don't
Hi Everyone,
I was wondering if there is anyone out there in NAGIOS land that can
help me with an snmp issue that I have.
I have to monitor 5 UPSes for our VOIP system.
I want to monitor the following:
when the UPS starts using the battery
the battery charge Status, and report when
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of David Francis
Sent: 04 December 2007 12:32
To: Nagios Users Mailinglist
Subject: [Nagios-users] Missing Server.cfg file
Greetings all
I don't know what changed but I've noticed
I try adding 'retain_status_information 0' in host definition for
Nagios
server. Now, its host status is 'pending' instead of 'down'. But the
default host initial state shouldn't be 'up'?
You could try sending a passive check result to put it back into an OK
state.
Hi,
I am using some CGI filters in a Custom URL for our NOC.
The URL I am using is:
status.cgi?host=allservicestatustypes=28serviceprops=42hostprops=10t
ype=detail
The service propers and host props filter out alerts for services and
hosts in scheduled downtime and/or acknowledged.
These are
Error: Could not add duplicate hostextinfo entry for host 'americano'.
Start with the first error.
Duplicate hostextinfo information for host Americano...
Do a grep (type 'man grep' for the manual page on how to use it) for the
Americano host and check that you have not defined this in multiple
Error: Could not allocate memory for hostextinfo list to add extended
info for host 'americano'.
Error: Could not register extended host information (config file
'/usr/local/nagios/etc/servers/hostextinfo.cfg', starting on line 6)
Also, for your other errors, you may want to check that you are
Have either of you had any luck with centerim?
I have centerim running as the Nagios user, and if I run the centerim on
the command line then I am able to send messages, but for some obscure
reason I cannot get the command to work within Nagios, this is my
command:
# 'notify-by-jabber' command
Is anyone using Francois Meehan's snmptraphandling.py script?
There's a part of the script where it opens the Nagios.cmd file. I'm not
a python coder, but it appears to me that it writes to the file with 'w'
which would overwrite any pending commands that Nagios has not yet
processed:
On 29 Nov 2007, at 08:53, Giles Coochey wrote:
Is anyone using Francois Meehan's snmptraphandling.py script?
There's a part of the script where it opens the Nagios.cmd file.
I'm not
a python coder, but it appears to me that it writes to the file
with 'w'
which would overwrite any
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Pablo Escobar
Sent: 27 November 2007 20:12
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] notification by mail not working
hi all
I´m really desesperate because I
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Kevin Scott Sumner
Sent: 28 November 2007 15:49
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Environmental monitoring
This is somewhat off-topic, but can anyone
define contactgroup{
contactgroup_name esadmins
alias Nagios Administrators
members nagiosadmin,biju
}
Do you have any hosts/services which are associated with this contact
group?
-Original Message-
From: Biju Augustine [mailto:[EMAIL PROTECTED]
Sent: 27 November 2007 11:43
To: Giles Coochey
Subject: Re: [Nagios-users] Not getting alerts through email.
I dont have
(vi /etc/hosts
IP address biju.essentia.com)
You will not receive alerts unless you
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Giorgio Zarrelli
Sent: 26 November 2007 11:58
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Integrating nagvis
Hi,
I used:
nagios-3.0b6
nagvis-1.2b2
ndomy_1)
NDO reports that Nagios is not running
Any clue what is wrong?
On Nov 26, 2007 11:01 AM, Giles Coochey [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Giorgio Zarrelli
Sent: 26 November 2007 11:58
Below
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Giles Coochey
Sent: 19 November 2007 13:02
To: nagiosplug
Subject: [Nagiosplug-help] jabber notification
Hi All,
I have seen the notify_by_jabber perl script.
Because of the number
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: 15 November 2007 14:17
To: Nagios List
Subject: [Nagios-users] Contacting Ethen
I'd like to get ahold of Ethen about consulting Nagios installations.
I
want
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: 13 November 2007 22:14
To: Hugo van der Kooij
Cc: [EMAIL PROTECTED]; Nagios Users
Mailinglist
Subject: Re: [Nagios-users] Were can I find the check_snmp plugin
Dear All,
I m trying to monitor using check_oracle
plugin.But whn i checked my oracle from Plugin like ./check_oracle
--tns
orcl and it gives me ok status but whn i used this by putting entry in
hosts, services and chkcommands thn if gives like Oracle Home is not
set
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Israel Brewster
Sent: 12 November 2007 23:27
To: Nagios Users mailinglist
Subject: [Nagios-users] Status display colors
Is there any way to change the colors generated by status.cgi?
Steve Ensley wrote:
I'm upgrading another departments Nagios 1.3 instance to Nagios 2.9.
they
are using nsclient to get some info from some nt servers. Most of
my
Nagios
experience has been monitoring Unix servers.
The website at http://nsclient.ready2run.nl/ for nsclient doesnt
1 - 100 of 168 matches
Mail list logo
