Hi all, hope you can help me out with this question I have just been sent
which is as follows: -
We have had a security warning from the hosting company, one of the Nagios
User processes was using up 90% of the CPU:
8521 nagios 25 0 6144 2168 1524 R 90.4 0.0 566:17.51 x
A review of the users
As a new user I struggled with the CLI aspect of Nagios so turned to
Groundwork's for my solution; this worked well for me on the navigation side
of things but saying that without this group I would be nowhere.
What can Lilac offer me over GW?
Thanks
-Original Message-
From: Taylor
Not sure what went off with this server last night but my processes log
below shows lots of Nagios entries, does any know why this would happen and
how I could prevent it in future
Thanks all
root 1 0 0 May25 ? 00:00:35 init [3]
root 2 1 0 May25 ? 00:00:00 [migration/0]
root 3 1 0 May25 ?
user spawned ./update
500. My guess is that you have a check command defined that calls
./update, maybe the 500 is some kind of timeout? Check your command config
file.
Regards
Martin Melin
On Tue, Oct 6, 2009 at 2:20 PM, Marc Powell m...@ena.com wrote:
On Oct 6, 2009, at 6:46 AM, Martyn wrote
Hi all, I have just installed Gnokii for my SMS alerts and having a few
issues, could you check my config and let me know if you see any errors or
any reason why I can not send SMS alerts.
I can send SMS via command line in the following way:
echo Hello World | gnokii --sendsms +123456789 -r
Hi Craig, looks like I was wrong after doing some research
-Original Message-
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: 02 September 2009 10:21
To: cr...@hooters-uk.com; christian.masop...@siemens.com;
nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] Nagio + SMS
Craig not sure if this is a correct statement but I think that gnokii only
supports Nokia Mobiles, like I said not 100% sure.
-Original Message-
From: cr...@hooters-uk.com [mailto:cr...@hooters-uk.com]
Sent: 02 September 2009 10:15
To: christian.masop...@siemens.com;
minutes and then report SSL problems the next,
do you think a change has been made somewhere if so could you point me to
where the possible changes were made.
Thanks all
Martyn
--
Let Crystal Reports handle the reporting
Hi all
We have a box that needs monitoring but ping has been blocked by their
firewall and they do not want to allow connections to this port, what other
way is there to check the host is alive if ping has been disabled. At the
minute host shows down but their services show up.
Thanks
Martyn
have.
check_nt_memuse!ARG1!ARG2
Why does this show as critical?
Thanks
Martyn
--
Enter the BlackBerry Developer Challenge
This is your chance to win up to $100,000 in prizes! For a limited time,
vendors
? I suspect that
these non-numeric values both translate to 0, so all memory use would show
up as critical.
Martyn wrote:
Hi All, I'm monitoring a windows server and Nagios is alerting the
memory usage as critical, below is what Nagios is showing.
CRITICAL 09-07-2009 12:42:261d 2h 48m 23s
Does anybody know where I can purchase one of these in the UK at all?
Also what would be the next level up for an SMS gateway, is there a server
version around
Cheers
--
___
Hi Group
I'm trying to find a way of letting our users acknowledge
their own servers faults without the need to log in to
Nagios, I have seen that there are remote commands you can
issue which allow this to happen, but this is where I need a
little instruction on how to use them.
:53:40 BST 2009
Additional Info:
CRITICAL - Socket timeout after 10 seconds$
Cheers
Martyn
--
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect
-Original Message-
From: James Pratt [mailto:jpr...@norwich.edu]
Sent: 12 May 2009 16:44
To: Martyn; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Mail help needed
-Original Message-
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: Tuesday, May 12
That is how I have mine set up Craig and it is working as follows:
Alerts 1, 2 and 3 are emails, then 4, 5 and six are SMS and no emails are
sent.
However after that it reverts back to sending mails again.
-Original Message-
From: Marc Powell [mailto:m...@ena.com]
Sent: 07 May 2009
Yep that is me and I'm willing to pay for any help on getting this function
working.
-Original Message-
From: Aaron Segura [mailto:aaron.seg...@cabelas.com]
Sent: 06 May 2009 22:48
To: cr...@hooters-uk.com
Cc: nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] nag2ast
-Original Message-
From: Assaf Flatto [mailto:assaf.fla...@ssp-intl.com]
Sent: 17 April 2009 13:37
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] SMS notification for warning and critical
you can do it with a modem and the smsclient software
/sbin/tcpd' server.
#
nrpe: 17.0.0.1 monitor.domain.co.uk
But I'm still getting Could not complete SSL handshake, is the above
configuration correct or can I not use domain names instead of IP's
Thanks
Martyn
--
Stay on top
] only_from = 127.0.0.1
On Thursday April 23 2009 11:07:06 am Martyn wrote:
Can anybody tell me how I use domains names instead of IP address in
the nrpe file, I have read somewhere that you can use tcp wrappers
which I have tried.
My nrpe file looks like this:
# default: on
# description: NRPE
I'm not being ignorant but as I complete novice on none windows boxes, how
do I put setting 3 in front of the line
Many thanks for your reply
Martyn
-Original Message-
From: Christian Schneemann [mailto:cschneem...@suse.de]
Sent: 23 April 2009 11:05
To: nagios-users
That has now done the trick but I'm a little confused as to why this work
under host.allow and not when used in my nrpe file, does anybody have the
answer to that?
Its on Centos 5.3, I'm going to try Fedora to see if that is the same
Thanks for your help
Martyn
PS what his top posting, once I
On Apr 23, 2009, at 6:35 AM, Martyn wrote:
PS what his top posting, once I find out I will stop it
http://en.wikipedia.org/wiki/Posting_style, specifically
http://en.wikipedia.org/wiki/Posting_style#Top-posting
--
Marc
.
Hope you can help
Thanks
Martyn
--
Stay on top of everything new and different, both inside and
around Java (TM) technology - register by April 22, and save
$200 on the JavaOne (SM) conference, June 2-5, 2009, San
Hi all
I would like to change the email alerts per users if I may, is there a way
of setting up so only 3 mails get sent to users A but only two mails to
user B even if the fault is still there, if not per users then across the
board.
I have searched around but finding anything, not sure if I'm
:47 GMT 2009
Additional Info:
Connection refused ##
Thanks
Martyn
--
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly
Excellent, thank you.
Martyn
-Original Message-
From: Philipp Geschke [mailto:nag...@pgmail.net]
Sent: 15 March 2009 18:02
To: Martyn
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Add ## for mail to sms
Hi Martyn,
Martyn schrieb:
/usr/bin/printf %b * Nagios
Will do
-Original Message-
From: Marc Powell [mailto:m...@ena.com]
Sent: 15 March 2009 18:49
To: nagios-users Listserv
Subject: Re: [Nagios-users] Add ## for mail to sms
On Mar 15, 2009, at 12:09 PM, Martyn wrote:
So to get my mail to SMS should look like the below, my provider
Why does Nagios need the NSClient to access Windows boxes when other systems
like PRTG use windows logon conditionals, think Cacti is the same also.
Thanks
--
Apps built with the Adobe(R) Flex(R) framework and Flex
Tomasz thanks for the reply, do you have a example of such commands or could
point be to a place that does
Thanks
Martyn
-Original Message-
From: Tomasz Chmielewski [mailto:man...@wpkg.org]
Sent: 12 March 2009 10:44
To: Martyn
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios
How do I add the windows credentials.
check_nt -H 192.168.1.1 -p 1248 -v INSTANCES -l Process
If I run the above it will give me a refused connection, where in the above
line would I add the username and password of the Windows box I want to
connect to?
Thanks
Martyn
-Original Message
you like).
In other words, you don't have to use generic checks shipped with nagios
This kind of implied that it can be done with Nagios.
Apologies if I misunderstood it
Martyn
-Original Message-
From: Andreas Ericsson [mailto:a...@op5.se]
Sent: 12 March 2009 12:27
To: Martyn
Cc: 'Tomasz
Beat me too it with the same question
Martyn
_
From: Onotsky, Steve x55328 [mailto:steve.onot...@broadridge.com]
Sent: 11 March 2009 15:55
To: ncc...@gmail.com; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] How to receive notification alert by sms
tomobile phone using
I have been asked to see if Nagios can monitor free PTEs, I'm going to hit
Goole to find out what they are but thought I would ask the group who know
everything first
Cheers
Martyn
Thanks for the reply, do you know of which one I would monitor, this is all
pretty new to me.
Thanks
Martyn
-Original Message-
From: Kevin Keane [mailto:subscript...@kkeane.com]
Sent: 10 March 2009 18:07
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] free Page
backwards.
Martyn
-Original Message-
From: Taylor Dondich [mailto:tdond...@gmail.com]
Sent: 10 March 2009 04:43
To: Martyn
Cc: ncc...@gmail.com; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Any recommendations
Please please please. Best Nagios 3.x configuration tool
Hi Group, anybody used or can recommend ant of the below, or any others, I
think if I can build a few via a GUI it will give me a better understanding.
Nagmin
Nagat
Nagiosweb
Thanks
Martyn
--
Open Source Business
the manual... or at least
a good book about it. :)
Of course, a few years of experience as a UNIX/Linux admin won't hurt
either...
A. Davis
Email: ncc...@gmail.com
There is no limit to what a man can accomplish
if he doesn't care who gets the credit. - Ronald Reagan
Martyn wrote
Just on a lighter note, what do we call a bunch of Nagios users;
Nagiothions?
--
___
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
Marc it makes perfect sense now, thanks for the detailed explanation.
Thanks again!
Martyn
-Original Message-
From: Marc Powell [mailto:m...@ena.com]
Sent: 05 March 2009 16:29
To: Nagios Users
Subject: Re: [Nagios-users] Nagios/NRPE relationship
On Mar 4, 2009, at 5:26 PM, Martyn
Brill, this is the kind of thing that helps me learn how to use programs,
wish a few more would post things like this.
Cheers
_
From: vinod.e [mailto:vino...@enlume.com]
Sent: 05 March 2009 10:57
To: Nagios-users@lists.sourceforge.net
Subject: [Nagios-users] How to monitor using
Hi Mike, thanks for the shameless link and the links from that also, some
nice reading material there.
Could this be adopted to use Call Manager Express with VM in the same way as
I have this running as my home phone system.
Cheers
Martyn
-Original Message-
From: Mike Diehl [mailto:mdi
maybe this link will help you out, not sure though as I'm new too
http://www.mernin.com/blog/?p=118
_
From: Jai Ram [mailto:jai...@gmail.com]
Sent: 04 March 2009 16:42
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Any Help
Hello,
Can anyone post there experience in
check_nrpe!check_ssh
}
Hope its not such a stupid question that it does not warrant a reply.
Rgs
Martyn
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles
IP address only.
Thanks
Martyn
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation
of my pillow if there was a fault.
Does anybody know of a company that offers email to voice service, this way
I get Nagios to send an email to a server which in turn call my mobile and
will play me an alert of some kind.
Cheers
Martyn
Can anybody recommend an MSI editor, I would like to add the IP address of
the server before I send the client MSI out, if I have to purchase one I do
not mind.
Cheers
Martyn
--
Open Source Business Conference (OSBC
NSClient is that I am using HTTPS to submit the
results (an older version also supported SSH, but I have not re-implemented
that in the latest version). That lets me avoid firewall issues.
It is based on NSClient++ with quite a few enhancements.
http://sourceforge.net/projects/tntmonitoring/
Martyn
?
Cheers
Martyn
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs
Thanks Marc, I will start to tune it
Regards
-Original Message-
From: Marc Powell [mailto:m...@ena.com]
Sent: 26 February 2009 17:41
To: Nagios Users Mailinglist
Subject: Re: [Nagios-users] Procs Warning
On Feb 26, 2009, at 11:14 AM, Martyn wrote:
Not being very familiar
Morning Group, Depending on your location.
I'm on a fresh install of Ubuntu 8.04 server install with lamp and getting
the following error when I'm trying to install the plugins
make[1]: Entering directory `/home/martyn/downloads/nagios-plugins-1.4.6/po'
/bin/sh @MKINSTALLDIRS@ /usr/local/nagios
in the wrong place .Check where your nagios install is .
If this is for a client ? you may need to create the path manually !
On Monday 23 February 2009 08:55:32 Martyn wrote:
Morning Group, Depending on your location.
I'm on a fresh install of Ubuntu 8.04 server install with lamp
!
On Monday 23 February 2009 08:55:32 Martyn wrote:
Morning Group, Depending on your location.
I'm on a fresh install of Ubuntu 8.04 server install with lamp and
getting the following error when I'm trying to install the plugins
make[1]: Entering directory
`/home/martyn/downloads/nagios
Do I need to load Nagios plugins as well as NRPE on the Linux box I want to
monitor, I will be monitoring it remotely.
I have read users comments saying you do and some say you do not
Cheers
Martyn
--
Open Source
and if so how did you fix it.
Cheers
Martyn
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost
not configured postfix in anyway, the install guide just implied that
I did the following and it would work out of the box so to speak
apt-get install sysutils mailx lsb-release postfix
Do I need to carry out additional steps in postfix, if so what are they.
Thanks for your reply
Martyn
Cheers Marc, am on to it right now
-Original Message-
From: Marc Powell [mailto:m...@ena.com]
Sent: 19 February 2009 16:41
To: Nagios Users
Subject: Re: [Nagios-users] Nagios + Postfix
On Feb 19, 2009, at 10:11 AM, Martyn wrote:
Proweb is not under my control
I'm not to sure what
[mailto:m...@ena.com]
Sent: 19 February 2009 16:41
To: Nagios Users
Subject: Re: [Nagios-users] Nagios + Postfix
On Feb 19, 2009, at 10:11 AM, Martyn wrote:
Proweb is not under my control
I'm not to sure what you mean with regards to the rest of you reply, I
have not set up postfix
, this is
confusing me now.
Thanks
-Original Message-
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: 19 February 2009 20:13
To: 'Marc Powell'; 'Nagios Users'
Subject: RE: [Nagios-users] Nagios + Postfix
I have tried for the last few hours buy I can not resolve it, where have I
gone wrong
Hi Alan I tried Looking Glass as suggested but I get the following error, I
followed the install doc through a couple of times bur still the same error,
could somebody point me in the right direction
Nagios Looking Glass Error Report
Sorry for the inconvenience, but Nagios Looking Glass could
But how can I make an install ISO that will allow me to install afresh to a
new server, ask for username, password IP address and so on.
Then once the install is complete a I a running Nagios Server.
Thanks
Martyn
at the processors I would
find what was hogging it but is there a plugin/module or add-on that I can
use to see what processors maxing out.
Thanks
Martyn
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
@lists.sourceforge.net
Subject: Re: [Nagios-users] Nagvis
Martyn,
Your config looks good to me, are you sure there is data going into the ndo
database ?
Check your nagios.log for:
ndomod: Successfully connected to data sink. 0 queued items to flush.
Rgds - Simon
Martyn mar...@chetnet.co.uk 10/02
All working now, I went through the install stage again, not sure what I
missed but I must of missed something
Thanks all for your time again
Martyn
-Original Message-
From: sascha.runsc...@gfkl.com [mailto:sascha.runsc...@gfkl.com]
Sent: 10 February 2009 10:45
To: nagios-users
/cgi-bin
This is from my /ndomod.cfg
# INSTANCE NAME
# This option identifies the name associated with this particular
# instance of Nagios and is used to seperate data coming from multiple
# instances. Defaults to 'default' (without quotes).
instance_name=default
Thanks again
Martyn
/nedi/rrd which is an empty directory but I still get no graphs.
Does anybody know the correct line I should be adding?
Thanks
Martyn
--
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software
I can not find system.rrd anywhere on my server
_
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: 08 February 2009 11:43
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Nedi + nedi.conf
I'm having errors graphing my Switch, the error is
/opt/nedi/rrd/Network-SW
Hi there.
Is this the best way to get MRTG working in Ubuntu?
http://linuxbasement.com/content/mrtg-ubuntu-server
Regards
Martyn
--
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software
Have any of you got Centreon working with Nagios, I just followed their Wiki
guide and it has messed my up.
Going to try and delete all the .cfg files it created in my Nagios and
replace my nagios.cfg to see if I can get back up and running again
Martyn
Web Solutions
1212 Baker Street Fort Collins, Colorado 80524
970-689-3999
www.us-able.com http://www.us-able.com/
Design is not just what it looks like and feels like. Design is how it
works - Steve Jobs
_
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: Friday, February 06, 2009 9
at 2:00 PM, Martyn mar...@chetnet.co.uk wrote:
I had that at first but I got past that, its just the monitoring now that
does not work.
3 hours I have been at it for days now :)
Cheers
_
From: Scott Ackerman [mailto:li...@scott-ackerman.com]
Sent: 06 February 2009 16:20
To: nagios
/createNDODB.sql
When I run that query it just returns with - and sits there forever or
until I press ctrl c
Do you know what the issue is at all.
Thanks
Martyn
--
Create and Deploy Rich Internet Apps outside the browser
root ndo
/usr/local/src/centreon-2.0/www/install/createNDODB.sql' at line 1
Will take a look into in to see what it is
Thanks for the reply though, it got me one stage further
Martyn
-Original Message-
From: Andy Shellam [mailto:andy-li...@networkmail.eu]
Sent: 05 February 2009 21:12
Just looking at one on the lines again below, do I need to use 'centreon';
or just centreon; leaving out the '
mysql -u root
mysql use centreon;
mysql update cfg_ndo2db set db_user = 'centreon';
mysql exit;
Thanks
Martyn
-Original Message-
From: Martyn [mailto:mar...@chetnet.co.uk
just looking around my directories and I find one /usr/include/net-snmp
So why does my check_hplj not compile ?
This is killing me now
Cheers
_
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: 03 February 2009 17:23
To: 'James Pratt'; 'nagios-users@lists.sourceforge.net'
Subject
was
compiled with lots of others too.
Just got to sort out my Cisco Switch now do I can point the check_command to
port 47
Just like to say a massive thanks to those who kept with me, James and Marc
especially.
So I think there may be a bug in nagios-plugins-1.4.13.tar.gz
Cheers
Martyn
James thanks again for the reply.
Below are a list of things that failed in the config.log file
ACLOCAL='${SHELL}
/home/martyn/downloads/nagios-plugins-1.4.13/build-aux/missing --run
aclocal-1.9'
ALLOCA=''
ALLOCA_H='alloca.h'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL
] Monitor Disk Drive
What does the command look like ?
Since the service is invoking a command - you need to make sure that the
structure adheres to the format requested by the command .
On Monday 02 February 2009 14:12:40 Martyn wrote:
How do I monitor another disk drive other that c:\
Below
/libexec/check_nt -H 192.168.3.1 -v USEDDISKSPACE -l f -p
12489 -w 80%
Rgs
Martyn
-Original Message-
From: Marc Powell [mailto:m...@ena.com]
Sent: 02 February 2009 14:46
To: nagios-users ML
Subject: Re: [Nagios-users] Monitor Disk Drive
On Feb 2, 2009, at 8:12 AM, Martyn wrote:
How do I
Yes it does help Palle and thanks for the reply, just on a learning curve
here.
Martyn
_
From: Palle L Jensen [mailto:pall...@gmail.com]
Sent: 02 February 2009 15:32
To: 'Martyn'; nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] Monitor Disk Drive
Martyn,
Running
/libexec directory and noticed that check_snmp is in
there but not the above two.
Where would I get hold of the two files as described
Thanks for your continued support
Martyn
--
This SF.net email is sponsored by:
SourcForge
/usr/bin/snmpget -t 1 -r5 -m ' ' -v 1 [authpriv] 192.168.3.252:161
Hope you can help
_
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: 02 February 2009 17:33
To: 'nagios-users@lists.sourceforge.net'
Subject: HP Network Printer
Just
me on my quest to learn about this fantastic
monitoring solution.
Regards
Martyn
---
--- This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf
Quite embarrassed now to say the lease, I had missed out the closing }
Sorry and thanks for your replies
Martyn
-Original Message-
From: Marc Powell [mailto:m...@ena.com]
Sent: 02 February 2009 15:10
To: nagios-users ML
Subject: Re: [Nagios-users] Monitor Disk Drive
On Feb 2, 2009
://nagios.manubulon.com instead.
http://osdir.com/ml/network.nagios.user/2003-01/msg00028.html
HTH
Regards,
jamie
From: Palle L Jensen [mailto:pall...@gmail.com]
Sent: Monday, February 02, 2009 3:00 PM
To: 'Martyn'; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] HP Network
[mailto:pall...@gmail.com]
Sent: 02 February 2009 20:00
To: 'Martyn'; nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] HP Network Printer
Martyn,
I have noticed people monitoring other stuff on printers using the SNMP
protocoll. However, since we have that protocol disabled I have
86 matches
Mail list logo
