On 29 Aug 2013 02:46, Mark Campbell mcc...@psu.edu wrote:
So I need to utilize some logic in my service checks.
I have a chiller that if it is not running the discharge temp is not of
concern. However if it is running the discharge temp needs to be lower
than 50 degrees.
Is there a way to
So I need to utilize some logic in my service checks.
I have a chiller that if it is not running the discharge temp is not of
concern. However if it is running the discharge temp needs to be lower
than 50 degrees.
Is there a way to have the check snmp utilize some logic that says if
running
Good morning , i have one doubt about rstp bridges ... i did two different
paths to my RouterOS bridges, both with rstp enable, now i need monitoring
this values.
I someone know any plugin for nagios who work well, please send me some
idea...
I cnt locate this on nagios plugins,
thanks in
Good morning , i have one doubt about rstp bridges ... i did two different
paths to my RouterOS bridges, both with rstp enable, now i need monitoring
this values.
I someone know any plugin for nagios who work well, please send me some
idea...
I cnt locate this on nagios plugins,
thanks in
Hello,
I have nagios 3.2.3. Sometimes, the nagios want to check my services (not
all) in the future.
For example:
Next Scheduled Check: 04-09-2014 08:26:08
But check interval:
Normal Check Interval = 0h 5m 0s
Usually, this situation occurs in services, which in down more than a one
day.
Issue of
Hi all,
I have websites that I monitor.
Some require just a yes is it up or no its down by hitting the site and
searching for text on it.
Others require the site to be logged into and trawled to test SQL backend so I
need to provide it with a username/password.
I also want performance data
On 03/08/12 14:49, Andrew Thompson wrote:
Hi all,
I have websites that I monitor.
Some require just a yes is it up or no its down by hitting the site
and searching for text on it.
Others require the site to be logged into and trawled to test SQL
backend so I need to provide it with a
Bryan,
You're on the right track understanding check_load. There are 3 values
for warning level and 3 values for the critical level, one each for the
1-minute, 5-minute, and 15-minute load averages. For the check_load
plugin, a warning or critical state is achieved if any one (not all
three)
I've got a 24 core box over here, obviously I need to tweak the
configuration of the check_load plugin as it seems designed for a single
core machine by default.
define service{
use generic-service
host_name localhost
service_description
:
De: Alex Griffin agrif...@nagios.com
Objet: Re: [Nagios-users] check windows's manager tasks
À: Nagios Users List nagios-users@lists.sourceforge.net
Date: Mercredi 13 juin 2012, 16h46
What do you mean when you say it doesn't work? That's very vague and
not enough information to help you
Yes it's right.
--- En date de : Jeu 21.6.12, Luis H. Forchesatto luisforchesa...@gmail.com a
écrit :
De: Luis H. Forchesatto luisforchesa...@gmail.com
Objet: Re: [Nagios-users] check windows's manager tasks
À: Nagios Users List nagios-users@lists.sourceforge.net
Date: Jeudi 21 juin 2012
/luisforchesa...@gmail.com/* a écrit :
De: Luis H. Forchesatto luisforchesa...@gmail.com
Objet: Re: [Nagios-users] check windows's manager tasks
À: Nagios Users List nagios-users@lists.sourceforge.net
Date: Jeudi 21 juin 2012, 14h07
I think he wants to monitor a process on windows
:49 AM, bruno beatrice wrote:
Yes it's right.
--- En date de : *Jeu 21.6.12, Luis H. Forchesatto /
luisforchesa...@gmail.com/* a écrit :
De: Luis H. Forchesatto luisforchesa...@gmail.com
Objet: Re: [Nagios-users] check windows's manager tasks
À: Nagios Users List nagios
Sorry about that Luis!
Bruno Beatrice,
please see the response posted.
Regards,
Yancy Ribbens
---
Tech Team
yribb...@nagios.com
On 6/21/2012 2:35 PM, Luis H. Forchesatto wrote:
bruno beatrice
--
Live Security
What do you mean when you say it doesn't work? That's very vague and
not enough information to help you.
Alex Griffin
---
Tech Team
agrif...@nagios.com
On 06/12/2012 07:33 AM, bruno beatrice wrote:
hello,
i'd like check my windows task manager. i'd like to receive a mail when
it doesn't
when the task doesn't start
--- En date de : Mer 13.6.12, Alex Griffin agrif...@nagios.com a écrit :
De: Alex Griffin agrif...@nagios.com
Objet: Re: [Nagios-users] check windows's manager tasks
À: Nagios Users List nagios-users@lists.sourceforge.net
Date: Mercredi 13 juin 2012, 16h46
What do
hello,
i'd like check my windows task manager. i'd like to receive a mail when it
doesn't work. i don't nagios very well. Someone can explain me step by step how
i must configure my nagios?
thank's
--
Live Security
Hi Paul,
I didn't know that is possible to use check_http to check the return of the
page.
I'll check it...
many thanks!
On Thu, May 10, 2012 at 10:44 AM, Paul Weaver paul.wea...@bbc.co.uk wrote:
There was a guy that configured to monitory it by the tcp port,
however, rarely the jboss came
Hi people,
good morning!
There was a guy that configured to monitory it by the tcp port, however,
rarely the jboss came very slow and nagios does not report anything because
the port is listening.
Does anyone know a plugin to check a specific instance of jboss and the
port or other things
There was a guy that configured to monitory it by the tcp port,
however, rarely the jboss came very slow and nagios does not report
anything
because the port is listening.
Does anyone know a plugin to check a specific instance of jboss and
the port or other things together?
What part of jboss
I would suggest looking at this script:
http://nagios.manubulon.com/snmp_int.html
Frank
-Original Message-
From: Mester [mailto:mes...@freemail.hu]
Sent: Saturday, March 03, 2012 12:24 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Check multiple ports of a switch
Hi All,
I try to check our switch for bad packets. I have succesfully made the
configuration file, but for some reason it always sais SNMP OK.
This is the command I use for checking:
/usr/local/nagios/libexec/check_snmp -H ip_address -C name -o
ifInErrors.101 -w 10 -c 100, -o ifInErrors.102 -w
What you need is an event handler combined with the external commands
Take a look at the documentation about those two topics .
Assaf
aiman parvaiz wrote:
Hi everyone
Am trying to detect disk thrashing by monitoring si, so from the
vmstat command. I am monitoring other services using
Hi everyone
Am trying to detect disk thrashing by monitoring si, so from the vmstat
command. I am monitoring other services using nagios and service check
happens after every 5 minutes. For this thrashing service I want that
nagios should check it after every 20 minutes and if the status returned
Hi list,
I would to detect if any user is directly connected (console) on my Linux
servers (Debian, CentOS).
I've created this bash simply bash script :
#!/bin/bash
WHO=`which who`
GREP=`which grep`
WC=`which wc`
RESULT=`$WHO | $GREP tty | $WC -l`
if [ $RESULT -ne 0 ]
then
echo $RESULT
Hi,
I don't know about some SNMP OID which lists the connected users on
Linux servers (and if someone knows about it, I will be glad to be
updated). You can however interface your script with the UCD MIB on your
monitored servers using the extTable table (1.3.6.1.4.1.2021.8).
Marc-André
On Thu,
Hi,
what about HOST-RESOURCES-MIB::hrSystemNumUsers.0 ?
snmpget -v2c -c xxx belinda HOST-RESOURCES-MIB::hrSystemNumUsers.0
HOST-RESOURCES-MIB::hrSystemNumUsers.0 = Gauge32: 2
You have to load the MIB of cause. If you prefer the numerical OID:
snmptranslate -On
It works fine, but I prefer to use an other method, most lighter than the
check_by_ssh.
Do you know an other way to do that, via SNMP for exemple.
I run NRPE on my Linux systems... It is much lighter than using
check_by_ssh.
Benny
--
Open your door, or I open your wall.
Thanks for your answers.
I don't know how works the OID 1.3.6.1.4.1.2201.8. I will search more
information about it. Thanks for this solution.
About HOST-RESOURCES-MIB::hrSystemNumUsers.0, it returns number of opened
sessions, include ssh. I just want to see if a session is opened in a tty.
But
Actully, i don't use NRPE. But why not, i 'll have a look at this.
2011/10/6 C. Bensend be...@bennyvision.com
It works fine, but I prefer to use an other method, most lighter than the
check_by_ssh.
Do you know an other way to do that, via SNMP for exemple.
I run NRPE on my Linux
Betreff: Re: [Nagios-users] Check Swap in/out rate instead of percentagefree?
On 2 Aug 2011, at 15:58, Wenig, Michael (IT/I4Z)
michael.we...@ww-informatik.de wrote:
Hi all,
We want to know when one of our servers is swapping as a swapping
server is a normally dead server
Hi all,
We want to know when one of our servers is swapping as a swapping server is a
normally dead server :-)
Currently we have the normal swap checks which generates a warning when more
than 5% swap are used and a critical when more than 10% are used.
This works ok until one time someone
On 2 Aug 2011, at 15:58, Wenig, Michael (IT/I4Z)
michael.we...@ww-informatik.de wrote:
Hi all,
We want to know when one of our servers is swapping as a swapping server is
a normally dead server :-)
Currently we have the normal swap checks which generates a warning when
more than 5% swap are
I think it would be more sufficient to not monitor how much swap is in use
but to check if pages are read from swap in some period of time. Such as
warning: if some pages were read out of swap
critical: if in all of the last three measurement-periods pages were read
I can acces the
-Original Message-
From: Jonathan Aquilina [mailto:eagles051...@gmail.com]
Sent: Monday, July 25, 2011 7:18 AM
To: Nagios Users List
Subject: [Nagios-users] check http port 80 warning on a site that actually
exists.
I am workign with a site which i have being monitored by nagios, and for
some
, 2011 7:18 AM
To: Nagios Users List
Subject: [Nagios-users] check http port 80 warning on a site that actually
exists.
I am workign with a site which i have being monitored by nagios, and for
some reason when check_http runs it gets a 404, but if you go to the
domain the page exists
: Jonathan Aquilina [mailto:eagles051...@gmail.com]
Sent: Monday, July 25, 2011 7:18 AM
To: Nagios Users List
Subject: [Nagios-users] check http port 80 warning on a site that actually
exists.
I am workign with a site which i have being monitored by nagios, and for
some reason when check_http
On Mon, Aug 1, 2011 at 10:58 AM, Jonathan Aquilina
eagles051...@gmail.com wrote:
Would you say this is a false positive?
No. It's a positive response to your check. The check is a HTTP
check, and the server is not a responding with a valid HTTP response,
hence you need to find a different way of
Can you share the URL?
Frank
-Original Message-
From: Jonathan Aquilina [mailto:eagles051...@gmail.com]
Sent: Monday, July 25, 2011 7:18 AM
To: Nagios Users List
Subject: [Nagios-users] check http port 80 warning on a site that actually
exists.
I am workign with a site which i have
I am workign with a site which i have being monitored by nagios, and for
some reason when check_http runs it gets a 404, but if you go to the
domain the page exists and the site exists.
Would this be a false positive, and if so how can i fix it.
Also another interesting matter is that when i
Can you please provide me the procedure to configure through check_wmi_plus
plugin , i mean writing the command and service definitions and how to make
changes in configuration file to reflect in the browser.
On Sat, Jul 2, 2011 at 12:45 PM, Matthew Jurgens
nagiosus...@edcint.co.nzwrote:
**
Hi
Looks like the user you are using DAVE? don´t have the necesary
permission in the cgi.cfg file look for it at nagios/etc folder.
Greets.
El 05/07/2011 6:08, nag ios escribió:
hi this is krishna,
I have a problem while viewing the status of hosts or any link in
the browser i
hi this is krishna,
I have a problem while viewing the status of hosts or any link in the
browser i get the following error as
it appears as though you do not have permission to view information for any
of the hosts you requested...
If you believe this is an error,check the HTTP server
This maybe help:
http://www.cyberciti.biz/faq/shell-scripting-run-command-under-alarmclock/
On 11/30/2010 10:42 PM, steve f wrote:
I am running a homemade check to check about 8 core processes.
Occasionally the check times out after 10 seconds.
All this check does is run /etc/init.d/
Hi,
I've written a Nagios plugin that performs many Windows checks directly
from Linux without any Windows proxy ie a client-less Window checking
plugin called check_wmi_plus (see
http://exchange.nagios.org/directory/Plugins/Operating-Systems/Windows/WMI/Check-WMI-Plus/details)
Now, I'm
Trond Hasle Amundsen t.h.amund...@usit.uio.no writes:
Are you using check_openmanage with NRPE or similar in local mode, or
checking via SNMP?
I have an idea of what the problem might be. Can you try either of the
development versions of check_openmanage available here:
On Wed, Apr 27, 2011 at 8:28 AM, Trond Hasle Amundsen wrote:
Trond Hasle Amundsen t.h.amund...@usit.uio.no writes:
Are you using check_openmanage with NRPE or similar in local mode, or
checking via SNMP?
I have an idea of what the problem might be. Can you try either of the
development
Ashcor Technologies ash...@optonline.net writes:
I ran check_openmanage.exe --only storage locally and it worked fine.
I then changed the NSC.ini to have:
command[check_openmanage]=check_openmanage.exe --only storage
and restarted the NSCLient++ (x64) service in test mode.
the results:
Hi list,
Since upgrading dell openmanage from v 6.3 to 6.5 we have errors using
the check-openmanage plugin. The errors are:
INTERNAL ERROR: Use of uninitialized value in hash element at
/usr/lib64/nagios/plugins/check_openmanage line 4599.
INTERNAL ERROR: Use of uninitialized value in length
Steve Glasser sglas...@visp.net writes:
Since upgrading dell openmanage from v 6.3 to 6.5 we have errors using
the check-openmanage plugin. The errors are:
INTERNAL ERROR: Use of uninitialized value in hash element at
/usr/lib64/nagios/plugins/check_openmanage line 4599.
INTERNAL ERROR:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everyone,
last week I had a new problem - all Nagios checks of the SAP systems
succeeded, but no one was able to login or to work inside SAP. The users
got a timeout message, but remained logged in. The usual checks via
check_sap_cons still
: [Nagios-users] check if SAP login is possible
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everyone,
last week I had a new problem - all Nagios checks of the SAP systems
succeeded, but no one was able to login or to work inside SAP. The users
got a timeout message, but remained logged
Morning all (depending where you are in the world..)
I'm trying to catch all error and warning logs from application event folder
but I'm struggling with the filter+generated bit.
In a nut shell all I want is anything red that happened within the last 24
hours.
Here is my syntax I'm running
On 21 February 2011 10:27, Tristan Drinkwater trist...@micro-p.com wrote:
Morning all (depending where you are in the world..)
I’m trying to catch all error and warning logs from application event folder
but I’m struggling with the filter+generated bit.
In a nut shell all I want is anything
Hello,
It is generally much much simpler to use the new SQL-like syntax.
Then you end up writing something which looks a bit like this:
generated -1d AND severity NOT IN ('success', 'informational')
There is some information on the wiki for how to use this here:
On 11 January 2011 02:09, Yu Watanabe yu.watan...@jp.fujitsu.com wrote:
Hello all.
I'd like to confirm if the check scheduling mechanism had changed
between version 2.x and 3.x.
I have tried to check the documentation for 3.x but it seems that its
still under construction.
If it hadn't
Hello all.
I'd like to confirm if the check scheduling mechanism had changed
between version 2.x and 3.x.
I have tried to check the documentation for 3.x but it seems that its
still under construction.
If it hadn't changed from version 2.x I want to refer the previous version .
Had it changed
I was refering to the chapter Service and Host Check Scheduling.
Thanks!
Yu Watanabe
Yu Watanabe さんは書きました:
Hello all.
I'd like to confirm if the check scheduling mechanism had changed
between version 2.x and 3.x.
I have tried to check the documentation for 3.x but it seems that its
still
On 1/5/11 11:27 PM, Yu Watanabe wrote:
Thank you for the reply.
I understood that notification events will hang up the normal service check
events.
I was bit curious about your comment.
A lot of people end up writing external notification handlers to take the
load off of Nagios so the
Thank you for the reply.
So the length of Notfication depends on the command which you use...
some ticketing and tracking systems, and some pagers).. At the height of
the bad times Nagios would block for 40 or so seconds, sending out
every single notification serially. Just dumping out a spool
2011 5:04 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Check behavior during the notification event
Hello all.
I would like to ask a question regarding to the behavior of check
scheduling
during the massive number of notification event is occuring.
I have couple
Hello all.
I would like to ask a question regarding to the behavior of check scheduling
during the massive number of notification event is occuring.
I have couple of notification group defeined in each service but when
notification
alerts occur consecutively among multiple services, it seems
-Original Message-
From: Yu Watanabe [mailto:yu.watan...@jp.fujitsu.com]
Sent: Thursday, 6 January 2011 5:04 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Check behavior during the notification event
Hello all.
I would like to ask a question regarding
Stuart Browne さんは書きました:
-Original Message-
From: Yu Watanabe [mailto:yu.watan...@jp.fujitsu.com]
Sent: Thursday, 6 January 2011 5:04 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Check behavior during the notification event
Hello all.
I would like to ask
I need to check on a Windows server that a processes is running, but for
two users. (So two instances should run, one as user1 and one as user2).
I'm running nc_net on the server (which is running Win server 2008 R2)
and can test for the process running using something like:
check_command
Hi
I have the below Raid Controller Card on HP DL 360 G6 Server. Can someone
please suggest/guide and let me know if there is a Raid Check script for
this specific model
03:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6
controllers (rev 01)
Subsystem: Hewlett-Packard
Use check_cciss (uses hpacucli which must be installed), raid checker for
HP.
Duncan
From: Kaushal Shriyan [mailto:kaushalshri...@gmail.com]
Sent: 09 December 2010 09:04
To: nagios Mailinglist
Subject: [Nagios-users] Check RAID Script
Hi
I have the below Raid Controller Card on HP DL
Hi
Am Donnerstag, den 09.12.2010, 09:43 + schrieb Duncan Berriman:
Use check_cciss (uses hpacucli which must be installed), raid checker
for HP.
Thanks, I was also looking for something like this, but:
maintain:/usr/lib/nagios/plugins# ./check_cciss -v
RAID OK: [Controller Status: OK
Am Donnerstag, den 09.12.2010, 11:10 +0100 schrieb Sebastian Ries:
Hi
Am Donnerstag, den 09.12.2010, 09:43 + schrieb Duncan Berriman:
Use check_cciss (uses hpacucli which must be installed), raid checker
for HP.
Thanks, I was also looking for something like this, but:
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Check RAID Script
Hi
Am Donnerstag, den 09.12.2010, 09:43 + schrieb Duncan Berriman:
Use check_cciss (uses hpacucli which must be installed), raid checker
for HP.
Thanks, I was also looking for something like
Dear List,
Is there any plug-in available for nagios to check the newly added
Host/Services/Contacts and notify by email.
/\
dE
--
Increase Visibility of Your 3D Game App Earn a Chance To Win $500!
Tap into the
Hi,
On Friday, December 03, 2010 11:53:38 trm asn wrote:
Dear List,
Is there any plug-in available for nagios to check the newly added
Host/Services/Contacts and notify by email.
could you be more verbose what kind of plugin you are looking for?
Regards,
Christian
/\
dE
--
On 12/03/2010 07:29 AM, Sebastian Ries wrote:
Hi
The check_folder_size.sh script will probably suit your needs well.
Yes, I found scripts for this.
The Problem is that a du within this folder takes about 2 minutes.
That's why I told that it is a very large directory with many files)
In
I am looking for a plugin which will check the hosts.cfg, contacts.cfg,
command.cfg and if found any new entry has been added into those files ,
then will be notified to the specific email id .
On Fri, Dec 3, 2010 at 4:23 PM, trm asn trm.nag...@gmail.com wrote:
Dear List,
Is there any
Subject: Re: [Nagios-users] Check size of large directory
On 12/03/2010 07:29 AM, Sebastian Ries wrote:
Hi
The check_folder_size.sh script will probably suit your needs well.
Yes, I found scripts for this.
The Problem is that a du within this folder takes about 2 minutes.
That's why I told
On 12/03/2010 03:28 PM, trm asn wrote:
I am looking for a plugin which will check the hosts.cfg, contacts.cfg,
command.cfg and if found any new entry has been added into those files ,
then will be notified to the specific email id .
Hope you find one. It shouldn't be hard to write yourself
On Fri, Dec 03, 2010 at 07:29:54AM +0100, Sebastian Ries wrote:
The check_folder_size.sh script will probably suit your needs well.
Yes, I found scripts for this.
The Problem is that a du within this folder takes about 2 minutes.
That's why I told that it is a very large directory with many
We keep those files under RCS revision control and make people check them out
and in to add new information. If we wanted to, I'd probably write an rcsdiff
to see if anything's checked out that's not been checked back in.
Otherwise, two ideas come to mind:
- Create a daily cron job to check
Actually I thought of further things I'd make such a cron job do (this could
easily be a simple bash or perl script)...
- if the files have changed, check their times against the time nagios last
restarted and warn if they are newer (as the changes aren't being picked up by
the running nagios)
Hi
I need to check the size of a directory...
The problem is that this directory is very large (needs to stay under
1TB - that's why I need the check) and I cannot move it to an own
partition (content is hard-linked)
So I tried to write the size of this directory into a file (content does
not
On 12/02/2010 10:31 AM, Sebastian Ries wrote:
Does anyone know about a plugin that can do this?
Check out the check_file plugins from the nagios-of-plugins.
http://www.openfusion.com.au/labs/nagios/
I'm pretty sure it will work on a directory the same as a file. Should
be something like:
Hi there --
The check_folder_size.sh script will probably suit your needs well.
-Original Message-
From: Sebastian Ries [mailto:sebastian.r...@dtnet.de]
Sent: Thursday, December 02, 2010 10:31 AM
To: nagios-users-ML
Subject: [Nagios-users] Check size of large directory
Hi
I need
Hi
The check_folder_size.sh script will probably suit your needs well.
Yes, I found scripts for this.
The Problem is that a du within this folder takes about 2 minutes.
That's why I told that it is a very large directory with many files)
The other side is that the content within this
Andreas,
Thanks for your reply to my earlier message. I've done some testing and some
more thinking on this since then:
On 11/23/2010 03:50 AM, Andreas Ericsson wrote:
On 11/22/2010 10:41 PM, Paul M. Dubuc wrote:
We're using Nagios 3.2.3 for simulation of monitoring load in a load test
On 11/22/2010 10:41 PM, Paul M. Dubuc wrote:
We're using Nagios 3.2.3 for simulation of monitoring load in a load test
environment as well as for monitoring production services. I've notices some
interesting behavior in the way Nagios schedules checks when checks are
inhibited either though
On 11/23/2010 08:54 AM, Christian Schneemann wrote:
Hi,
On Tuesday, November 23, 2010 01:52:10 Jon Adcock wrote:
Can you give me some ideas on where I can start troubleshooting why none
of my 3 Nagios servers show when an update is available?
have you installed from source or a
Andreas,
In reply to Christian's question, I installed it from source (and compiled it
myself). However, our Nagios systems are all running on Novell Suse Linux
Enterprise Server (SLES).
Jon Adcock
Network Systems Administrator
MIS / Systems Team
Leon County
(850) 606-5500
Andreas
We're using Nagios 3.2.3 for simulation of monitoring load in a load test
environment as well as for monitoring production services. I've notices some
interesting behavior in the way Nagios schedules checks when checks are
inhibited either though the CGI Process Commands or by setting a
When Nagios Core 3.2.3 came out, I waited a week to see if the main landing
page (main.php) would tell me that an update was available. My notification
never showed up. If everything is working properly, I THINK it is supposed to
display a banner on the page that says A new version of
Hi,
On Tuesday, November 23, 2010 01:52:10 Jon Adcock wrote:
Can you give me some ideas on where I can start troubleshooting why none
of my 3 Nagios servers show when an update is available?
have you installed from source or a package from a distributor?
Suse packages for example have a
Hello,
I'm looking for a plugin that checks more than one port on the same check.
A syntax like: check_tcp -H xx.yy.com -p [port1];[port2];...[port_n]
Thanks in advance.
--
Ivan Muñoz Fuentes
Dept. D'Educació de la Generalitat de Catalunya
Email: imun...@xtec.cat
Telf: 935516926
(2010?07?29? 12:28), Israel Brewster wrote:
Is there a plugin that allows me to check if I can make an ActiveSync
connection to an exchange server? I've found plugins that use, for
example, check_nt to check various parameters of the exchange server,
and of course I can make sure that IMAP
On Aug 3, 2010, at 6:14 AM, Mike A. Leonetti wrote:
(2010年07月29日 12:28), Israel Brewster wrote:
Is there a plugin that allows me to check if I can
make an ActiveSync connection to an exchange server? I've found
plugins that use, for example, check_nt to check various
Is there a plugin that allows me to check if I can make an ActiveSync connection to an exchange server? I've found plugins that use, for example, check_nt to check various parameters of the exchange server, and of course I can make sure that IMAP and SMTP connections are working, but I haven't
Hello All
In the last couple of weeks i noticed an odd occurrence in the output of
the check_procs on my master Nagios server
the default command : check_local_procs , gives out the following output :
WARNING;PROCS WARNING: 380 processes with STATE = RSZDT
Although when executing the command
Hi all,
I installed Nagios on a 32-bit system (CentOS 5.3) following the directions
given here: http://docs.cslabs.clarkson.edu/wiki/Install_Nagios_on_CentOS_5
Everything went well and I ran nagios -v /etc/nagios/nagios.cfg and got no
errors or warnings. But when I tried to start Nagios, it
Hi,
after the latest firmware upgrade to a IBM DS 4700, the Check for the IBM
ds4000 series totalstorage cabinet stopped working.
I made a small fix to the perl plugin, just 2 lines. To have the plugin
working with the latest cli, make this substitutions:
Line 164
Change
if($line=~/Array
Hi at all,
I'm newbie on nagios and I'm writing here to ask you for suggestions
abut how to structure my monitoring situation.
I've to monitor linux servers for about 15/20 customers, from 1 to 5
server for each customer.
We aren't on vpn with customers, so this servers are all behind NAT.
That
Hi,
yes you can. I splitted all the major files in smaller files and nested
directories, so it's easier for me to manage all the services and hosts.
And I assure you, I have an heavy split configuration.
quota chi=Enrico Zimol
Hi at all,
I'm newbie on nagios and I'm writing here to ask you
I want to check certain web pages on my servers to see if they change at all,
such as a comment is left or someone has hacked my site. Is there a way to have
Nagios check it's last polled HTML code and compare it to the next poll? Or
something to that effect?
1 - 100 of 445 matches
Mail list logo
