Hi All
I have installed the nagios application and facing some problems while starting
nagios
[EMAIL PROTECTED] conf.d]# rpm -qa | grep nagios
nagios-2.4-1.el4.rf
[EMAIL PROTECTED] conf.d]# service nagios start
Starting network monitor: nagios
CONFIG ERROR! Start aborted. Check your Nagios
Hi ALL
the question is in the subject line
Thanks and Regards
Kaushal
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT
Hi All
I did followed http://nagios.sourceforge.net/docs/2_0/configmain.html and
did configured nagios.cfg step by step by following the URL
[EMAIL PROTECTED] ~]# nagios -v /etc/nagios/nagios.cfg
Nagios 2.5
Copyright (c) 1999-2006 Ethan Galstad (http://www.nagios.org)
Last Modified: 07-13-2006
Hi ALL
I get
# nagios -v /etc/nagios/nagios.cfg
Nagios 2.5
Copyright (c) 1999-2006 Ethan Galstad (http://www.nagios.org)
Last Modified: 07-13-2006
License: GPL
Reading configuration data...
Running pre-flight check on configuration data...
Checking services...
Error: There are no services
Hi ALL
nagios -v /etc/nagios/nagios.cfg
Nagios 2.5
Copyright (c) 1999-2006 Ethan Galstad (http://www.nagios.org)
Last Modified: 07-13-2006
License: GPL
Reading configuration data...
Running pre-flight check on configuration data...
Checking services...
Error: There are no services defined!
On 9/10/06, Jim Perrin [EMAIL PROTECTED] wrote:
Top posting because there's no actual question here.
What's your point?
Read the docs. Configure nagios to taste. You haven't defined anything.
On 9/10/06, Kaushal Shriyan [EMAIL PROTECTED] wrote:
Hi ALL
nagios -v /etc/nagios/nagios.cfg
Hi ALL
I have installed Nagios 2.5 (nagios-2.5-1.el4.rf) from
http://dag.wieers.com/packages/nagios/ on
Red Hat Enterprise Linux AS release 4 (Nahant Update 2)
After going through
http://nagios.sourceforge.net/docs/2_0/configmain.html#cfg_file
Object Configuration File
Format:
Hi
I am a newbie to Nagios, If i have to monitor SMTP and HTTP services using
Nagios
define service{
host_name linux-server
service_description check-disk-sda1
check_command check-disk!/dev/sda1
max_check_attempts 5
/etc/init.d/nrpe start
* Starting nrpe ...
* Failed to Start
nrpe[ !!
]
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Register now
Hi,
I just want only email alerts instead of sms alerts,How can i configure it
on a specific host
Thanks and Regards
Kaushal
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio
Hi
when i run the below command i get NRPE: Unable to read output
sudo -u nagios /usr/nagios/libexec/check_nrpe -H localhost -c
check_total_procs
NRPE: Unable to read output
Thanks and Regards
Kaushal
-
This SF.net email
Grove St. Suite 204
Evanston, IL 60201
Phone: 847-424-0954 ex 14
Cell: 847-343-2349
Fax: 847-424-0986
[EMAIL PROTECTED]
On 05/28/2008 01:38 PM, Kaushal Shriyan wrote:
Hi
when i run the below command i get NRPE: Unable to read output
sudo -u nagios /usr/nagios/libexec/check_nrpe -H
On Thu, May 29, 2008 at 12:22 AM, Marc Powell [EMAIL PROTECTED] wrote:
On May 28, 2008, at 1:38 PM, Kaushal Shriyan wrote:
Hi
when i run the below command i get NRPE: Unable to read output
sudo -u nagios /usr/nagios/libexec/check_nrpe -H localhost -c
check_total_procs
NRPE
hi
I have installed [I--] [M~] net-analyzer/nagios-plugins-1.4.12 on Gentoo OS
when i do sudo qlist nagios-plugins, I dont see check_mysql and
check_mysql_query plugin. Also i have double checked /usr/nagios/libexec/
there isnt too.
Any ideas.
Thanks and Regards
Kaushal
Hi,
I am referring to
http://www.nagios.org/faqs/viewfaq.php?faq_id=191expand=falseshowdesc=falsefor
Make sure you are using the same version of the check_nrpe plugin and
the NRPE daemon.
How can i check the version of check_nrpe plugin and the NRPE daemon.
Thanks and Regards
Kaushal
PROTECTED] [mailto:
[EMAIL PROTECTED] *On Behalf Of *Kaushal Shriyan
*Sent:* Friday, June 13, 2008 2:33 AM
*To:* nagios Mailinglist
*Subject:* [Nagios-users] nagios-plugins-1.4.12
hi
I have installed [I--] [M~] net-analyzer/nagios-plugins-1.4.12 on Gentoo OS
when i do sudo qlist nagios-plugins
Hi,
I want to set a nagios alert whenever the count(*) of a specific table in
test DB (MySQL) on a specific host crosses 20 using mysql_check_query
plugin
I have referred to http://nagiosplugins.org/man/check_mysql_query for -w and
-c option
which says -w, --warning=RANGE Warning range
Hi,
I am getting this information in the web interface of Nagios. The below is
momentarily appearing means to say it appears for some time and then
disappears.
CHECK_NRPE: Error - Could not complete SSL handshake.
I have referred to the FAQ too
http://www.nagios.org/faqs/viewfaq.php?faq_id=191
On Thu, Jun 26, 2008 at 11:56 PM, Marc Powell [EMAIL PROTECTED] wrote:
On Jun 26, 2008, at 12:36 PM, Kaushal Shriyan wrote:
Hi,
I am getting this information in the web interface of Nagios. The
below is momentarily appearing means to say it appears for some time
and then disappears
Hi
I get [1215630364] ndomod: Still unable to connect to data sink. 1019216
items lost, 5000 queued items to flush. in nagios.log file
I can see the ndo2db has been started.
nagios 14086 19676 0 11:24 ?00:00:02 /usr/nagios/bin/ndo2db-2x -c
/etc/nagios/ndo2db.cfg
nagios 15964 19676
a mysql prompt.
\s should then show you a status screen with the database and connection
details.
Hope this helps.
Simon Finch
ESM Team Leader
St.George Bank
Australia
Kaushal Shriyan [EMAIL PROTECTED] 10/07/2008 5:17 am
Hi
I get [1215630364] ndomod: Still unable to connect to data
On Thu, Jul 10, 2008 at 3:06 PM, Thomas Guyot-Sionnest [EMAIL PROTECTED]
wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/07/08 01:56 AM, Kaushal Shriyan wrote:
Hi Simon
It works perfectly fine when i do the below steps
Do you have the ndodb daemon (or something similar
On Thu, Jul 10, 2008 at 4:03 PM, Thomas Guyot-Sionnest [EMAIL PROTECTED]
wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/07/08 06:11 AM, Kaushal Shriyan wrote:
Hi Thomas
Its running fine.
$ sudo fuser /var/nagios/ndo.sock
/var/nagios/ndo.sock: 7592 7639 7640 7711
On Thu, Jul 10, 2008 at 6:19 PM, Thomas Guyot-Sionnest [EMAIL PROTECTED]
wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/07/08 06:52 AM, Kaushal Shriyan wrote:
Hi Thomas
The permissions on nagios.lock are as below
$ ls -l /var/nagios/nagios.lock
-rw-r--r-- 1 nagios
On Thu, Jul 10, 2008 at 6:32 PM, Kaushal Shriyan [EMAIL PROTECTED]
wrote:
On Thu, Jul 10, 2008 at 6:19 PM, Thomas Guyot-Sionnest [EMAIL PROTECTED]
wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/07/08 06:52 AM, Kaushal Shriyan wrote:
Hi Thomas
The permissions
Hi
Is there a Nagios Plugin for lighttpd web server.
Thanks and Regards
Kaushal
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win
Hi,
I get in the Nagios Web Interface for Tomcat Service NRPE: Command timed
out after 60 seconds this alerts I get only at 12:15 am IST
I have enabled debug=1 in nrpe.cfg file. But I have not noticed any thing in
the /var/log/messages file
Any ideas as what is going wrong
Thanks and Regards
Hi
Is there a Nagios Plugin to monitor Modem
Thanks and Regards
Kaushal
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win great
Hi
I have a query regarding check_http for the content in an html page. There
are quite a number of string by the name Connected in the HTML Page.
I have a requirement when there is a single instance of the string
Disconnected in an Web Page, Nagios should send an Problem Alert for the
string
Hi
I have a issue with a particular service on a host. when i check Nagios
Logs, I see as
[1224755367] SERVICE ALERT: nmhost0001;NetmagicHTTP;CRITICAL;HARD;1;HTTP
CRITICAL - pattern found
instead of SERVICE NOTIFICATION:
I dont get emails or sms for this service NetmagicHTTP on host
Hi
where can i get Nagios Ebuild 3.0.4 for Gentoo OS
Thanks and Regards
Kaushal
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win
Hi,
I have a query regarding check_http Nagios Plugin,it works fine without any
issues
my check_http line looks like /usr/lib/nagios/plugins/check_http -H
127.0.0.1 -p 8080 -u /SMPPSender/control -r Disconnected --invert-regex
Now when i get sms alert i see it as HTTP CRITICAL - pattern found,if
Hi
I have a situation whenever my website www.example.com goes down due to the
following reason,it gets redirected to error.example.com
1. tomcat is stopped
2. all threads are busy
3. tomcat not responding bcos of load or some code bug or DB error.
Nagios should send an Critical Alert. Can it
Hi,
is there a way to send Test Message as SMS from Nagios Server?
Thanks and Regards
Kaushal
--
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform
Hi,
When i restart any services on the remote client For example tomcat
application server running on port 8080. I dont get any notifications or
alerts. Just want to understand the technique is it because of the
normal_check_interval 5 configured in services.cfg and interval_length=60
defined in
On Wed, Apr 15, 2009 at 10:46 PM, Seth Simmons ssimm...@cymfony.com wrote:
Did you use –p in your command to specify the port?
If you don’t use –p it will default to 80.
*From:* Kaushal Shriyan [mailto:kaushalshri...@gmail.com]
*Sent:* Wednesday, April 15, 2009 1:06 PM
On Wed, Jun 3, 2009 at 12:41 PM, Kaushal Shriyan
kaushalshri...@gmail.comwrote:
Hi,
As per http://docs.nagvis.org/1.4/en_US/index.html for system
requirements, Is Nagvis 1.4 compatible with Nagios 3.0.6 Stable release. ?
Thanks,
Kaushal
Hi
checking in again for my earlier query posted
Hi,
Any recommended method to monitor customized init scripts. I know
check_tcp will only monitor ports.
Please suggest.
Thanks,
Kaushal
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for
Hi,
is it documented on how check_tcp plugin works ?
Thanks,
Kaushal
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune
Hi,
is there a Nagios Plugin to measure XMS (minimum heap size) and XMX
(maximum heap size) which is a parameter to set for CATALINA_OPTS for
tomcat application server?
Thanks,
Kaushal
--
Download Intel#174; Parallel
Hi,
I have the below bash script for nagios plugin. The issue is that i
dont need to hard code the controller c0 or c1 or c2 or c3. so on some
servers there may be two controllers c0, and c1 and on some server
there may be four controllers c0,1,2 and 3. I dont know it off hand
Typically if i run
On Wed, Aug 18, 2010 at 9:15 PM, Axel Rosenski rosen...@alternate.de wrote:
Hi,
The issue with the above bash script is that it will exit with 2 if
the controller c0 fail and it wont check for other controllers.
I need to check for other controllers too at the same time
Please suggest.
Hi,
What all ports or URL's needs to be monitored for Oracle DB Server ?
Please suggest.
Kaushal
--
Nokia and ATT present the 2010 Calling All Innovators-North America contest
Create new apps games for the Nokia N8 for
On Tue, Oct 26, 2010 at 12:36 PM, Jim Avery j...@jimavery.me.uk wrote:
On 25 October 2010 09:56, Kaushal Shriyan kaushalshri...@gmail.com wrote:
Hi,
What all ports or URL's needs to be monitored for Oracle DB Server ?
Please suggest.
Install the Oracle Instant Client on your Nagios server
Hi
I have the below Raid Controller Card on HP DL 360 G6 Server. Can someone
please suggest/guide and let me know if there is a Raid Check script for
this specific model
03:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6
controllers (rev 01)
Subsystem: Hewlett-Packard
Hi,
I am running Nagios on CentOS release 5.5 (Final). Any clue about the below
warning? Please let me know if any one needs any additional information.
/usr/sbin/nagios -v /etc/nagios/nagios.cfg
Nagios 2.12
Copyright (c) 1999-2007 Ethan Galstad (http://www.nagios.org)
Last Modified: 05-19-2008
Hi,
Any Nagios Plugin to monitor tomcat and java applications.
Regards
Kaushal
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how
Hi,
Is there a nagios plugin which will trigger alert if the svn codebase is
inconsistent in bunch of servers?
Regards,
Kaushal
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's
Hi,
Can someone please help me understand about various Nagios products as
mentioned in http://demos.nagios.com/ and typical use case in any
organization.
Regards,
Kaushal
--
Live Security Virtual Conference
Exclusive
On Fri, Jul 13, 2012 at 9:46 PM, Alex Griffin agrif...@nagios.com wrote:
Nagios Core is the open source product which is discussed on this list.
Nagios XI is a commercial product built on top of Core which provides an
easier interface and many additional features [1]. Nagios Fusion is for
Hi,
is there a way to trigger email/sms alert for a specific service to a
specific user. for example host a has 6 services, out of 6 services, can i
trigger email/sms alert for service 5 to user john for example?
Regards
Kaushal
On Wed, Jul 18, 2012 at 11:30 PM, Robert V. Bolton rob...@robertvbolton.com
wrote:
On Wed, Jul 18, 2012 at 11:25 AM, Kaushal Shriyan
kaushalshri...@gmail.com wrote:--
Hi,
is there a way to trigger email/sms alert for a specific service to a
specific user. for example host a has 6
Hi,
Is there a way i can set customized email/sms alert for a specific
service/host with specific subject line?
Regards,
Kaushal
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's
On Tue, Jul 24, 2012 at 5:05 PM, Kaushal Shriyan
kaushalshri...@gmail.comwrote:
Hi,
Is there a way i can set customized email/sms alert for a specific
service/host with specific subject line?
Regards,
Kaushal
Hi,
Can someone please reply on my earlier post to this Mailing list
Hi,
I have the php script which outputs the below variables along with the values.
#php solr_discount_check.php
PHP Deprecated: Directive 'register_long_arrays' is deprecated in PHP
5.3 and greater in Unknown on line 0
OutOfStock:15105
DiffId:0
DiffAtbt:0
InSync:15257
Is there a way to set
On Mon, Jul 30, 2012 at 4:05 PM, Kaushal Shriyan
kaushalshri...@gmail.com wrote:
Hi,
I have the php script which outputs the below variables along with the values.
#php solr_discount_check.php
PHP Deprecated: Directive 'register_long_arrays' is deprecated in PHP
5.3 and greater in Unknown
On Tue, Jul 31, 2012 at 2:30 PM, RichTea m...@catsnest.co.uk wrote:
On Tue, Jul 31, 2012 at 5:37 AM, Kaushal Shriyan kaushalshri...@gmail.com
wrote:
On Mon, Jul 30, 2012 at 4:05 PM, Kaushal Shriyan
kaushalshri...@gmail.com wrote:
Hi,
I have the php script which outputs the below
Hi,
Any example or any docs which explains to set sms Service/Host UP/Down
Notification alert in Nagios core 3.4.1?
Regards,
Kaushal
--
Live Security Virtual Conference
Exclusive live event will cover all the ways
send-sms-host,notify-host-by-email
send-sms is my own defined command which fires up lynx pointing to an
intranet where the
sms service runs.
Regards
2012/8/28 Kaushal Shriyan kaushalshri...@gmail.com:
Hi,
Any example or any docs which explains to set sms Service/Host UP/Down
Hi,
I have the problem: I am running the sms notification from cli on
remote linux server. it works fine first time and later fails second
time. Any Clue?
Problem details - http://fpaste.org/ckYw/
Regards,
Kaushal
--
Hi,
Is there a open source solution similar to pager duty service for Nagios
Alerts?
Regards,
Kaushal
--
Monitor your physical, virtual and cloud infrastructure from a single
web console. Get in-depth insight into apps,
On Fri, Nov 16, 2012 at 10:22 PM, Ranjib Dey dey.ran...@gmail.com wrote:
Asterix
Thanks Ranjib, Do you have any write up or How To's to setup pager duty on
Asterisk (http://www.asterisk.org/).
Regards
Kaushal
On Nov 16, 2012 8:17 AM, Kaushal Shriyan kaushalshri...@gmail.com
wrote:
Hi
On Mon, Feb 4, 2013 at 10:39 PM, Kaushal Shriyan
kaushalshri...@gmail.comwrote:
Hi,
Any documentation on generating rpm packages for CentOS 5.8 from
nagios.spec file located inside after extracting source file for both the
links
http://www.nagios.org/news/77-news-announcements/346-nagios
Hi,
Any clue regarding the below issue?
Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.88063
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd nagios-plugins-1.4.16
+
DOCDIR=/var/tmp/nagios-plugins-1.4.16-1-root-root/usr/share/doc/nagios-plugins-1.4.16
+ export DOCDIR
+ rm -rf
On Tue, Mar 12, 2013 at 8:16 AM, Daniel Wittenberg
daniel.wittenberg.r...@statefarm.com wrote:
Just make sure /usr/lib/nagios/plugins/check_ldaps is listed in the
%files section of the .spec file and you should be good-to-go.
Dan
Hi,
Thanks Dan it worked. I have a similar issue with
Hi,
Have submitted a bug report for NRPE Version 2.14
http://tracker.nagios.org/view.php?id=431 Let me know if anyone needs
additional information.
Regards,
Kaushal
--
Symantec Endpoint Protection 12 positioned as A
Received: by 10.204.37.66 with HTTP; Tue, 12 Mar 2013 05:55:18 -0700 (PDT)
From: Kaushal Shriyan kaushalshri...@gmail.com
Date: Tue, 12 Mar 2013 18:25:18 +0530
Message-ID:
CAD7Ssm8o=fpznibzlwfkom8rrq2lwstnbh07-181vpm1y0b...@mail.gmail.com
To: nagios Mailinglist nagios-users@lists.sourceforge.net
X
I am running nagios version 3.2.3 on Ubuntu 12.04 server and running
postfix as smtp server. email alerts are not working. I checked postfix
logs and could not see nagios contacting smtp server
commands.cfg - http://paste.ubuntu.com/5660593/
nagios.cfg - http://paste.ubuntu.com/5660592/
Let me
Hi,
Are there Phone call feature available in Nagios for notification if some
mission critical application goes down at night most probably when we miss
an e-mail or sms notifying about that but won’t miss a telephone call to
the cell phone. Text-messages do not have any kind of mechanism to
Hi,
Thanks for the reply. I have put the below entries in nagios commands.cfg
file I am running Nagios 3.4.4 on CentOS 6.4.
define command {
command_name notify-host-by-hipchat
command_line /usr/bin/hipsaint
--token=c29bab160e8e6a4f3ca39ba6fe7c1d --room=67307 --type=host
On Fri, Jul 26, 2013 at 8:03 PM, Kaushal Shriyan
kaushalshri...@gmail.comwrote:
Hi,
Thanks for the reply. I have put the below entries in nagios commands.cfg
file I am running Nagios 3.4.4 on CentOS 6.4.
define command {
command_name notify-host-by-hipchat
command_line /usr/bin/hipsaint
On Sun, Jul 28, 2013 at 1:27 PM, Giles Coochey gi...@coochey.net wrote:
On 27/07/2013 10:38, Kaushal Shriyan wrote:
On Fri, Jul 26, 2013 at 8:03 PM, Kaushal Shriyan kaushalshri...@gmail.com
wrote:
Hi,
Thanks for the reply. I have put the below entries in nagios commands.cfg
file I am
the pipe character (*|
*) in the command.
Regards
Kaushal
On Jul 31, 2013 10:28 AM, Kaushal Shriyan kaushalshri...@gmail.com
wrote:
On Sun, Jul 28, 2013 at 1:27 PM, Giles Coochey gi...@coochey.net wrote:
On 27/07/2013 10:38, Kaushal Shriyan wrote:
On Fri, Jul 26, 2013 at 8:03 PM
Hi,
I am running Nagios Version 3.4.4 on CentOS Linux Version 6.4. As per
http://www.nagios.org/download/core/thanks?t=1375489385 do i need to update
it to 3.5.0 or upgrade to 4.x series and please help me understand the
difference between 3.x and the new beta 4.x version. Any dates planned for
On Mon, Aug 5, 2013 at 2:20 PM, Andreas Ericsson a...@op5.se wrote:
On 2013-08-03 02:27, Kaushal Shriyan wrote:
Hi,
I am running Nagios Version 3.4.4 on CentOS Linux Version 6.4. As per
http://www.nagios.org/**download/core/thanks?t=**1375489385http://www.nagios.org/download/core/thanks?t
On Mon, Aug 5, 2013 at 2:20 PM, Andreas Ericsson a...@op5.se wrote:
On 2013-08-03 02:27, Kaushal Shriyan wrote:
Hi,
I am running Nagios Version 3.4.4 on CentOS Linux Version 6.4. As per
http://www.nagios.org/**download/core/thanks?t=**1375489385http://www.nagios.org/download/core/thanks?t
Hi,
We have a OnCall system in place starting Monday to Sunday. So what i do is
send out email to the stakeholders keeping subject matter For example
Systems OnCall Person - Mr John (Start Date and End Date) is there a
way to automate this as per
On Wed, Aug 21, 2013 at 12:45 PM, Kaushal Shriyan
kaushalshri...@gmail.comwrote:
Hi,
We have a OnCall system in place starting Monday to Sunday. So what i do
is send out email to the stakeholders keeping subject matter For example
Systems OnCall Person - Mr John (Start Date and End Date
Hi,
Is there a way to know what caused load issue on a specific time period.
For example lets say the load critical alert by nagios during night time
period. How do i debug? I know of top utility but not sure if it stores
historical data. Please suggest and any recommendations to optimize the
,
Thanks for the reply. Apologies for not furnishing more info. I am running
CentOS Linux version 6.4
Regards,
Kaushal
On Sep 2, 2013, at 12:25 AM, Kaushal Shriyan kaushalshri...@gmail.com
wrote:
Hi,
Is there a way to know what caused load issue on a specific time period.
For example
80 matches
Mail list logo