Hi
Can someone provide some instructions or links on how to install Nagios
on CentOS distribution.
Thanks
Jatin
--
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's
Thanks Sebastian.
I have one question if i use the command as mentioned. Will it also
install all the depadencies that are required for the functioning of a
complete Nagios application. I mean will it also make the GUI of Nagios
functional ?
Thanks
Jatin
Sebastian Ries wrote:
Hi
Can
Thanks Assaf.
I am planning to install it on Fedora 8 and CentOS 5.4. I ll get help
from the community if i run into any issues.
Thanks
Jatin
Assaf Flatto wrote:
Jatin Davey wrote:
Thanks Sebastian.
I have one question if i use the command as mentioned. Will it also
install all
Jatin Davey ha scritto in data 05/01/2010 10.11:
Hi
Can someone provide some instructions or links on how to install Nagios
on CentOS distribution.
Thanks
Jatin
--
This SF.Net email is sponsored
Hi
I am a new user of Nagios. I installed the Nagios core , Plugins and the
NRPE addon based on the instructions mentioned in the quick start guide.
As of the NRPE addon i installed it using the document that was provided
with the tar file and everything went fine. Similarly i installed the
Got it , Added the configuration file location in the main configuration
file titled as: nagios.cfg
Thanks
Jatin
Jatin Davey wrote:
Hi
I am a new user of Nagios. I installed the Nagios core , Plugins and the
NRPE addon based on the instructions mentioned in the quick start guide
Hi all
I am seeing that graphs getting shown for the corresponding service that
i define but they are shown in terms of only 4 points , either critical
, ok , warning or indeterminate.
I need to see the graphs in terms of utilization values such as:
CPU -- % used (out of 100%)
Memory -- Total
Powell wrote:
On Jan 6, 2010, at 7:27 AM, Jatin Davey wrote:
I need to see the graphs in terms of utilization values such as:
CPU -- % used (out of 100%)
Memory -- Total memory (Used and free memory in terms of MB or KB etc)
Disk Usage -- Used Disk space and free disk space (In terms of MB
Hi all
While compiling the PNP4 pacakage i am seeing that one the modules is
not installed:
RRDs Perl Modules:*** NOT FOUND ***
Can someone tell me where to get the modules.
Thanks
Jatin
Joerg Linge wrote:
Am 07.01.10 14:25, schrieb Jatin Davey:
Hi Marc
Can you
Hi
I want to know how i can monitor the java process running on remote box
, basically i want to keep monitoring it and raise an email alert if it
has re-started or stopped functioning. Please let me know how this can
be achieved using nagios.
Thanks
Jatin
plugin in nagios.
Please let me know about it.
Thanks
Jatin
On 3/2/2010 7:40 PM, Asrai khn wrote:
On Tue, Mar 2, 2010 at 4:26 PM, Jatin Davey jasho...@cisco.com
mailto:jasho...@cisco.com wrote:
Hi
I want to know how i can monitor the java process running on
remote box
...@jimavery.me.uk]
Sent: Tuesday, March 02, 2010 7:35 AM
To: Jatin Davey
Cc: Nagios Mailinglist
Subject: Re: [Nagios-users] Monitor Java Process
On 2 March 2010 11:26, Jatin Daveyjasho...@cisco.com wrote:
Hi
I want to know how i can monitor the java process running on remote
box , basically i
I had a requirement to monitor Java process on my windows server and
send an email if it goes down.
I have achieved adding the monitoring of java process on my nagios setup
, i have no clue what to do get nagios send notifications.
Anyone knows please let me know the steps involved.
Thanks
Hi Ron
I just tried this yesterday , I had a requirment to monitor a java
process on a windows box and return a critical alert if it has stopped
working. I used the following on as the nagios configuration , this
should be added to the object configuration file:
define service{
use
Hi Matt
I tried the following from the command line:
echo test 1 | mail -s test 1 contactem...@whatever
I tried giving my email address but i am not receiving any mail. Let me
know what else i need to provide to make it work.
Thanks
Jatin
On 3/3/2010 10:42 PM, Matt Simmons wrote:
By
Jatin
On 3/4/2010 10:37 AM, Jatin Davey wrote:
Hi Matt
I tried the following from the command line:
echo test 1 | mail -s test 1 contactem...@whatever
I tried giving my email address but i am not receiving any mail. Let me
know what else i need to provide to make it work.
Thanks
Jatin
Hi
I used the following check_nt command to get the running status of a
process on remote windows machine,
check_nt!PROCSTATE!-d SHOWALL -l java.exe
The process above is java.exe , i have a situation where in i need to make sure
that i have 4 java.exe running on a windows box
if the number of
Hi
The Nagios documentation says that when you set the Notification
Interval to 0 , it will notify with an email alert only once when the
service state goes to down from up , it will then again notify when
the service comes back to up state , correct me if am wrong.
But when i set this to 0 ,
Hi
I am new to nagios and have been learning it since the last couple of
days. I still doing some basic monitoring on my servers in the lab. I
would like to know if there is a plugin available for nagios that can
get the remotely running JVM's operational parameters such as: CPU ,
Heap memory
-
From: Jatin Davey [mailto:jasho...@cisco.com]
Sent: Wednesday, March 03, 2010 3:20 AM
To: Edwin Zoeller
Cc: Nagios Mailinglist
Subject: Re: [Nagios-users] Monitor Java Process
Hi Edwin
Did you mean that you are using the Process ID of the process running on
the remote box to monitor its
Gargiullo [mailto:mgargiu...@pivotpointsecurity.com]
Sent: Wednesday, March 03, 2010 9:42 AM
To: Nagios Mailinglist
Subject: Re: [Nagios-users] Monitor Java Process
-Original Message-
From: Jatin Davey [mailto:jasho...@cisco.com]
Sent: Wednesday, March 03, 2010 3:20 AM
To: Edwin Zoeller
I did make sure to re-start nagios and also made sure that multiple
instances of it are not running.
Thanks
Jatin
On 3/6/2010 3:31 AM, Marc Powell wrote:
On Mar 5, 2010, at 4:16 AM, Jatin Davey wrote:
But when i set this to 0 , i am still getting email notifications every
10 mins
Hi Jim
Replies to the questions that you had asked about the issue:
1. I do not have any escalations defined.
2. Given below is the output from one of the host as found in the
object.cache file:
define host {
host_name Windows-
alias Windows XP PC
and destroy this e-mail. Any unauthorised
copying, disclosure or distribution of material in this e-mail is strictly
forbidden.
-Ursprüngliche Nachricht-
Von: Jatin Davey [mailto:jasho...@cisco.com]
Gesendet: Freitag, 5. März 2010 12:49
An: Nagios Mailinglist
Betreff: [Nagios-users
Hi All
Do we have a plugin that can monitor process id (pid) on a target
machine , the target machine could be anything such as windows , linux ,
solaris etc and alert with an email notification when the process id
changes.
Appreciate your responses.
Thanks
Jatin
alert.
Thanks
Jatin
On 3/8/2010 5:41 PM, Jatin Davey wrote:
Hi All
Do we have a plugin that can monitor process id (pid) on a target
machine , the target machine could be anything such as windows , linux ,
solaris etc and alert with an email notification when the process id
changes.
Appreciate
Hi Ambati
I followed this link:
http://svn.openvpn.net/projects/openvpn/misc/mibagent/README.txt
and it solved all my issues , Things went smoothly after following the
installation instructions as mentioned. Make sure you have access to the
fedora repositories to download the pacakages.
Please let me know what needs to be done , i am kind of receving 1000
notifications per day for the same hosts.
Thanks
Jatin
On 3/8/2010 9:54 AM, Jatin Davey wrote:
Hi Jim
Replies to the questions that you had asked about the issue:
1. I do not have any escalations defined.
2. Given
not be the process running with that id and
hence i need to raise an email notification alert.
Thanks
Jatin
On 3/8/2010 5:41 PM, Jatin Davey wrote:
Hi All
Do we have a plugin that can monitor process id (pid) on a target
machine , the target machine could be anything such as windows
Hi
I am getting this error when i monitor my windows box using NSClient++
NSClient - ERROR: Failed to get PDH value.
Please let me know what can be done.
Thanks
Jatin
--
Download Intel#174; Parallel Studio Eval
Try
interval set to 0 and
then used the service definition into all the services that i needed.
Appreciate your timely help in this regard.
Thanks
Jatin
On 3/9/2010 6:57 PM, Marc Powell wrote:
On Mar 9, 2010, at 1:50 AM, Jatin Davey wrote:
Please let me know what needs to be done , i am kind
replying, please edit your Subject line so it is more specific than
Re: Contents of Nagios-users digest...
Today's Topics:
1. Re: Notification Interval set to 0 not working as per doc
(Jatin Davey)
2. Re: priority: host or service who's really on top? (Jim Avery)
3. Re
Even restarting of the NSClient++ service does not help.
Thanks
Jatin
On 3/10/2010 2:42 PM, Mark Elsen wrote:
On Wed, Mar 10, 2010 at 9:57 AM, Jatin Daveyjasho...@cisco.com wrote:
It did not help , Still getting the same error.
- Try re-starting the nsclient service afterwards
In General , for monitoring application servers that run on tomcat and
others we have a plugin for nagios:
check this:
http://exchange.nagios.org/directory/Plugins/Java-Applications-and-Servers/check_jmx4perl/details
I have not tried this before but the documentation states that
application
Hi
Is there a plugin bundled with nagios-plugins that helps us in checking
the memory usage on the linux box. I basically want to know the used
memory and the total available , Even if it is given in percentage i am
fine. Please let me know if there are plugins to do so.
I checked the plugins
Hi
I had downloaded the perl file for check_mem plugin and copied in the
libexec folder of the target machine that needs to be monitored. On the
localhost it returns correct values but when i shoot the command from
the nagios server using NRPE i am getting the following :
NRPE: Unable to read
-
From: Jatin Davey [mailto:jasho...@cisco.com]
Sent: 12 March 2010 08:08
To: Nagios Mailinglist
Subject: [Nagios-users] check_mem shows : NRPE: Unable to read output
Hi
I had downloaded the perl file for check_mem plugin and copied in the
libexec folder of the target machine that needs
,
Quentin
-Original Message-
From: Jatin Davey [mailto:jasho...@cisco.com]
Sent: 12 March 2010 10:45
To: Marquez, Quentin
Cc: Nagios Users List
Subject: Re: [Nagios-users] check_mem shows : NRPE: Unable to read output
Hi Marquez
I ran the command in the same as you said and i am
Notification interval is different for hosts and services. You need to
set it for both so that you get the notifications as you want. If you
want notifications for the host then modify only the host template. By
doing so you will receive host related notifications once in 4 hours (or
whatever
Hi
Could someone suggest some good graphing addons for nagios. I need to
log very granular data in graphs using nagios checks.
Please suggest some good ones.
Thanks
Jatin
--
Download Intel#174; Parallel Studio Eval
Try
wrote:
pnp4nagios or nagiosgrapher. Pay attention to this: the granularity of
the graph depends on the frequency of the check.
Ciao,
Giorgio
Il giorno 25/mar/2010, alle ore 08.14, Jatin Davey
jasho...@cisco.com mailto:jasho...@cisco.com ha scritto:
Hi
Hi
I installed PNP4nagios and everything went fine. No errors were
reported. Then configured the synchronous mode. After which started the
first test to load the pnp4nagios web front end and i got the following
message:
PHP GD extension PHP GD extension not available
Then i issues
The GD extensions were already installed on my system. Also re-started
the Apache web server but still it is showing that the extension is not
available.
Thanks
Jatin
On 3/25/2010 6:20 PM, James Pratt wrote:
-Original Message-
From: Jatin Davey [mailto:jasho...@cisco.com]
Sent
a phpinfo page?
It may require just a simple restart of apache? Are you also running the
correct version too?
Thanks
Raymond
-Original Message-
From: Jatin Davey [mailto:jasho...@cisco.com]
Sent: 25 March 2010 12:46
To: Nagios Mailinglist
Subject: [Nagios-users] PHP GD Extension
Hi
I did add this in my web server , but how do i check if the extension is
enabled ?
I can see a lot of things when i view this web page. Please let me know.
Thanks
Jatin
On 3/25/2010 6:50 PM, Raymond Setchfield wrote:
?php
phpinfo();
?
to the pnp4nagios link using : http://x.x.x.x/pnp4nagios/
Here i am still seeing that the php-gd extension is not available.
Please let me know how to proceed next ?
Thanks
Jatin
On 3/25/2010 7:17 PM, Franky Van Liedekerke wrote:
On Thu, Mar 25, 2010 at 2:04 PM, Jatin Davey jasho...@cisco.com
Hi
While installing the NRPE addon , i am unable to issue the make all command.
Following the NRPE documentation, first i did ./configure command and
then when i gave the make all command , it shows me the following error:
[r...@pc-linux-1 nrpe-2.12]# make all
make: *** No rule to make target
Thanks Assaf. Appreciate your timely response in this regard.
Thanks
Jatin
On 3/26/2010 6:53 PM, Assaf Flatto wrote:
Jatin Davey wrote:
Hi
While installing the NRPE addon , i am unable to issue the make all command.
Following the NRPE documentation, first i did ./configure command
Thanks Raymond. Appreciate your timely response in this regard.
Thanks
Jatin
On 3/26/2010 7:52 PM, Raymond Setchfield wrote:
Hi
You will need to install openssl-devel on your machine this will resolve the
SSL headers issue
Thanks
Raymond
-Original Message-
From: Jatin Davey
Thanks Jelle.
Thanks
Jatin
On 3/29/2010 3:01 AM, Jelle Smet wrote:
I was actually looking for a plugin that can give me the %CPU used , Do
we have one with the default installation of the nagios plugins. Please
let me know about it.
Have a look on http://www.monitoringexchange.org/
Then it should be a bug right ? Please let me know if i can file it.
Thanks
Jatin
On 3/29/2010 4:49 PM, Michael Schwartzkopff wrote:
Am Montag, 29. März 2010 13:17:35 schrieb Jatin Davey:
Hi
I use the HOST-RESOURCES-MIB to get the status of the system and its
various parameters
machines and obtain system information via SNMP
Thanks
Jatin
On 3/29/2010 4:53 PM, Michael Schwartzkopff wrote:
Am Montag, 29. März 2010 13:17:35 schrieb Jatin Davey:
Hi
I use the HOST-RESOURCES-MIB to get the status of the system and its
various parameters. There is one such MIB parameter
is not resolved ?
Anyone knows please let me know.
Thanks
Jatin
On 3/29/2010 5:15 PM, Jatin Davey wrote:
Ok , here go the version of the plugin used taken from the help page of
the plugin:
[r...@pc-fedora-1 libexec]# ./check_snmp --help
check_snmp v1.4.14 (nagios-plugins 1.4.14)
Copyright (c) 1999-2007
Hi
I want to monitor the bandwidth usage on my linux box using nagios. I
checked the already existing plugins that i downloaded. I found that the
plugin named as : check_mrtgtraf can be used to achieve this
functionality. When i read through its help page i sensed that it reads
these values
Hi
I downloaded the plugin onto my nagios server , I executed a sample
command but i have some questions on it:
The output goes like this:
[r...@pc-fedora-1 libexec]# ./check_snmp_int.pl -H x.x.x.x -C xxx -n
eth0 -r -fY -k -w 100,100 -c 200,200 -d 40
eth0:UP (12.2KBps/20.6KBps):1 UP: OK |
Hi
I used the plugin check_snmp_int from the following site:
http://nagios.manubulon.com/snmp_int.html
The following command was executed on the nagios server:
[r...@pc-fedora-1 libexec]# ./check_snmp_int -H x.x.x.x -C -n eth0
-r -fY -k -w 1000,1000 -c 1100,1100 -d 40
eth0:UP
I am getting the following error:
application/models/data.php *[217]:
The XML file not found.
Thanks
Jatin*
On 3/30/2010 4:58 PM, Jatin Davey wrote:
Hi
I used the plugin check_snmp_int from the following site:
http://nagios.manubulon.com/snmp_int.html
The following command was executed
/mar/2010, alle ore 13.36, Jatin Davey jasho...@cisco.com
mailto:jasho...@cisco.com ha scritto:
I am getting the following error:
application/models/data.php *[217]:
The XML file not found.
Thanks
Jatin*
On 3/30/2010 4:58 PM, Jatin Davey wrote:
Hi
I used the plugin check_snmp_int from
Thanks Sascha.
Thanks
Jatin
On 3/30/2010 5:27 PM, sascha.runsc...@gfkl.com wrote:
[r...@pc-fedora-1 libexec]# ./check_snmp_int.pl -H x.x.x.x -C xxx
-n eth0 -r -fY -k -w 100,100 -c 200,200 -d 40
eth0:UP (12.2KBps/20.6KBps):1 UP: OK | 'eth0_in_Bps'=12506;102400;
204800;0;125
Thanks Marc.
Thanks
Jatin
On 3/30/2010 5:34 PM, Marc Powell wrote:
On Mar 30, 2010, at 5:47 AM, Jatin Davey wrote:
As you can see the output has the following:
eth0_in_Bps=12506;102400;204800;0;125
Could you explain what they indicate , i know of only in Bytes per second
, what
Two things:
1. I dont have a directory named as perfdata in the path :
/usr/local/nagios/share/perfdata
I have this directory in the following path :
/usr/local/pnp4nagios/var/perfdata , This directory usually has the
.rrd and the .xml files.
Currently for the service
I dont feel there can be an issue with the PNP installation as i passed
all the tests and i am currently monitoring 6 services and they are
plotting the graphs successfully.
Thanks
Jatin
On 3/30/2010 5:29 PM, sascha.runsc...@gfkl.com wrote:
The following command was executed on the nagios
.
Thanks
Jatin
On 3/30/2010 5:52 PM, Jatin Davey wrote:
Two things:
1. I dont have a directory named as perfdata in the path :
/usr/local/nagios/share/perfdata
I have this directory in the following path :
/usr/local/pnp4nagios/var/perfdata , This directory usually has
for exact similar situation.
Thanks
Nars
-Original Message-
From: Jatin Davey [mailto:jasho...@cisco.com]
Sent: Tuesday, March 09, 2010 1:57 AM
To: Matt Simmons
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Monitoring a process with its pid
Thanks Matt
Hi
Is it possible to create read-only users who just have read permissions
to access the nagios GUI ?
Can some one point me on how to do it.
Thanks
Jatin
--
___
Nagios-users
Hi
I am using the check_snmp_process to get the performance data for a
specific process. Basically i want to give the process name to the
plugin to get the memory used by that process. I get the following ouput
when i run the command:
Argument v6.0.0 isn't numeric in numeric lt () at
Hi
The check_snmp_process plugin gives me process level performance data. I
want to know how it reports in the following scenario:
I have two java processes running on my target machine , i use the
check_snmp_process plugin and get the memory usage of the java
processes. It reports me that
I gave it a try and even with this output i was able to plot the
performance graphs using PNP4.
Thanks
Jatin
On 4/29/2010 1:53 PM, Jatin Davey wrote:
Hi
I am using the check_snmp_process to get the performance data for a
specific process. Basically i want to give the process name
Hi
The plug-in check_snmp_process gives the performance data for the
processes running on a system. I have a system which runs 6 java
processes and i want to know the total memory used by all the 6 java
processes put together. But the plugin does not give this data , It
either gives the max
Hi
I have nagios plugins 1.4.11 currently installed in my ubuntu box. While
following the usual procedure of
./configure
make
make install
for installing the new 1.4.16 plugins i am unable to install them properly.
This is the output that i get:
make[4]: Nothing to be done for
70 matches
Mail list logo