of silicon made by
clueful folks… watch this space closely
Jeff
From: Colton Conor
Date: Monday, April 18, 2016 at 11:44 AM
To: lincoln dale
Cc: Jeff Tantsura , "nanog@nanog.org"
Subject: Re: New Switches with Broadcom StrataDNX
So can this compete routing wise against someth
Yes. We also have 1M+ FIB support day one too - hence the letter 'R'
denoting the evolution with 3rd generation of its evolution to internet
edge/router use cases.
Not sure what other vendors are doing but I doubt others are yet shipping
large table support.
(there's more to it than just the under
"nanog@nanog.org<mailto:nanog@nanog.org>"
mailto:nanog@nanog.org>>
Subject: Re: New Switches with Broadcom StrataDNX
Yes. We also have 1M+ FIB support day one too - hence the letter 'R' denoting
the evolution with 3rd generation of its evolution to internet edge/r
So can this compete routing wise against something like a Juniper MX104 or
Cisco ASR 9001?
On Mon, Apr 18, 2016 at 1:42 PM, lincoln dale wrote:
> Yes. We also have 1M+ FIB support day one too - hence the letter 'R'
> denoting the evolution with 3rd generation of its evolution to internet
> edge/
On 18/04/16 20:01, Colton Conor wrote:
> As a follow up to this post, it look like the Arista 7500R series has this
> new chip inside of it.
>
> On Wed, Jan 20, 2016 at 9:34 AM, Jeff Tantsura
> wrote:
>
>> That's right, logic is in programming chips, not their property. You just
>> need to know
As a follow up to this post, it look like the Arista 7500R series has this
new chip inside of it.
On Wed, Jan 20, 2016 at 9:34 AM, Jeff Tantsura
wrote:
> That's right, logic is in programming chips, not their property. You just
> need to know what to program ;-)
>
> Regards,
> Jeff
>
> > On Jan
That's right, logic is in programming chips, not their property. You just need
to know what to program ;-)
Regards,
Jeff
> On Jan 19, 2016, at 10:10 PM, Mark Tinka wrote:
>
>
>
>> On 20/Jan/16 00:17, Phil Bedard wrote:
>>
>> Good point, there are many people looking at what I call FIB optim
On 20/Jan/16 00:17, Phil Bedard wrote:
> Good point, there are many people looking at what I call FIB optimization
> right now. The key is having the programmability on the device to make it
> happen. Juniper/Cisco support it using policies to filter RIB->FIB and I
> believe both also do pe
New Switches with Broadcom StrataDNX
>Hi,
>
>Some points:
>1.DNX SDK is significantly different from SGX, adopted by Cumulus and such,
>yet to be done, and this is not negligible amount of work
>2.if you are not interested in capacity but in scale, there’re other BCM
>chips,
chips used by pretty much everyone else I
>> imagine at some point in the next year.
>>
>>
>>
>> Phil
>>
>> -Original Message-
>> From: NANOG on behalf of Colton Conor <
>> colton.co...@gmail.com>
>> Date: Sunday, January 17, 2016 at
but we’ll see.
Phil
From: Colton Conor
Date: Tuesday, January 19, 2016 at 09:29
To: Phil B
Cc: NANOG
Subject: Re: New Switches with Broadcom StrataDNX
I was hoping this new Broadcom chip would be able to support enough routes to
hold a full BGP table, and be used for something like
> From: NANOG on behalf of Colton Conor <
> colton.co...@gmail.com>
> Date: Sunday, January 17, 2016 at 18:15
> To: NANOG
> Subject: New Switches with Broadcom StrataDNX
>
> >Does anyone know when the switching and router vendors will release their
> >new m
On 19/Jan/16 13:54, Tarko Tikan wrote:
>
> Juniper silicon has one big advantage over BCM88670 - it supports 2M
> FIB entries. This makes PTX1000 (and QFX10002) very attractive
> platform for SPs.
Vendor-owned silicon will always provide better all-round performance.
It's just pricier.
Mark.
hey,
Juniper has chosen to use their own silicon for most of their dense 100G
platforms, but you’ll see these chips used by pretty much everyone else I
imagine at some point in the next year.
Juniper silicon has one big advantage over BCM88670 - it supports 2M FIB
entries. This makes PTX100
: Sunday, January 17, 2016 at 18:15
To: NANOG
Subject: New Switches with Broadcom StrataDNX
>Does anyone know when the switching and router vendors will release their
>new models with the Broadcom BCM88370 and BCM88670 chips? It looks like
>these chips could be used as a carrier grade rout
On 18/Jan/16 01:15, Colton Conor wrote:
> Does anyone know when the switching and router vendors will release their
> new models with the Broadcom BCM88370 and BCM88670 chips? It looks like
> these chips could be used as a carrier grade router and/or metro E device.
>
> More information here: ht
Does anyone know when the switching and router vendors will release their
new models with the Broadcom BCM88370 and BCM88670 chips? It looks like
these chips could be used as a carrier grade router and/or metro E device.
More information here: http://www.broadcom.com/press/release.php?id=s902223
17 matches
Mail list logo