RE: Re: [neonixie-l] Bubble Lights and other Christmas Lights of interest

Pifo hair dryers were common out here in the colonies waaay back! I think there were other appliances as well but…… DaveB NZ From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Adrian Godwin Sent: Saturday, December 10, 2022 03:17 To:

RE: [neonixie-l] Looking for Information about "Digicator" incandescent readouts

https://archive.org/details/TNM_Digicator_electronic_numeric_readouts_series__20171110_0112/mode/2up more data here- DaveB, NZ -Original Message- From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Dieter Waechter Sent: Saturday, November 05, 2022 21:47

RE: [neonixie-l] Vintage Electronic device with Nixies, need help identifying.

I have a Beckman Electronic Instrumentation catalog from 1967/68 and the 6220 Dual Preset Controller is included in it. I’ll scan the page or two that’s relevant later today and post the info. DaveB, NZ From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of

RE: [neonixie-l] Re: Tube Data

Subject: Re: [neonixie-l] Re: Tube Data Dave, As Martin said, Ericsson had a program of sending out new / revised datasheets as the info changes, and the recipients usually discarded old / superseded versions of the info. So the key question is whether your databook happens to contain pages

RE: [neonixie-l] Re: Tube Data

Thanks Martin- that’s the sort of information I need. I’ll check Frank’s site and see how mine compares- there are a number of pink sheets in this one. OK re the yellow one-sounds like it’s not worth scanning. If all I have to scan is the ITT one and a few pink sheets I can probably manage

RE: [neonixie-l] SLOT CLOCK...

Not being a gambler (and I tell lies!) it puts me in mind of the Telechron 8B01- from the 1930s…. http://uv201.com/Clock_Pages/Telechron/telechron_minitmaster.htm DaveB, NZ From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Michail Wilson Sent:

RE: [neonixie-l] Fwd: Today's Best items for Telechron Clocks

One of the most interesting Telechron’s is the ‘original’ digital clock, the 8B01. Mine is currently out of action awaiting a new rotor. If you’re interested just google for it-plenty of pictures on the net. DaveB, NZ From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On

RE: [neonixie-l] P12 Phosphor CRT

Keep in mind the B flying spot scanners use electromagnetic deflection CRTs. DaveB, NZ From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Paul Andrews Sent: Tuesday, February 11, 2020 01:59 To: neonixie-l Subject: Re: [neonixie-l] P12 Phosphor CRT I just

[neonixie-l] Re: Homebrew high voltage nixie power supply

Are you sharing your board designs as open source? Or will you sell bare PCBs?? -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to

RE: [neonixie-l] Re: OT : Natsemi clock module data wanted

Thanks very much- every little bit helps. Cheers Dave B, NZ From: 'orange_glow_fan' via neonixie-l [mailto:neonixie-l@googlegroups.com] Sent: Sunday, September 22, 2019 12:58 To: neonixie-l Subject: [neonixie-l] Re: OT : Natsemi clock module data wanted data sheet for the MA1026

[neonixie-l] OT : Natsemi clock module data wanted

Subject line sez all- I DO have the 1977 databook that covers some of these but not all. It covers the following- MA1002, MA1003, MA1010, MA1012, MA1013. These modules are based on the MM5313, MM5314 etc series of clock ICs but are a separate set of modules with added support circuitry around

RE: [neonixie-l] Re: What does your shop look like?

Paul The AVO meter case- is it a real one or one you made up- clock looks great, I could be persuaded to make something like that! DaveB,NZ From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Paul Parry Sent: Saturday, July 13, 2019 22:00 To: neonixie-l

RE: [neonixie-l] "I do not want this E1T, it is scratched"

I have a couple here that have had the decal damaged -be warned- get 'em damp and they slide right off. So I'm interested if anyone produces a replacement as well. DaveB, NZ -Original Message- From: 'Grahame' via neonixie-l [mailto:neonixie-l@googlegroups.com] Sent: Tuesday,

[neonixie-l] Re: "The Fortress " an E1T clock coming soon...

Awesome! I have a stash of these tubes and this just may be the ticket! On Saturday, February 16, 2019 at 5:48:53 PM UTC-5, Sgitheach wrote: > > Hi All > > Over the last year Nick Stock and I have been working on a clock using six > E1T decade counting tubes. I have been working on the

RE: [neonixie-l] Edge lit displays identification help needed

ically as-is?) A.J. Those are edge-lit readouts. Here are a couple photos of the IND-0300: http://home.comcast.net/~cwebster68/edgelit1.jpg http://home.comcast.net/~cwebster68/edgelit2.jpg - Chris W. *** Dave Brown Christchurch, NZ From: neonixie-l@googlegrou

[neonixie-l] Re: status of original Weisling FLW kit design? Clone kits? Software?

Do You plan to offer more PCBs and/or kits? If not, can you post the board design files or the gerber set? Please! On Friday, February 9, 2018 at 2:33:24 AM UTC-5, petehand wrote: > > I started shipping kits this week. I should have them all packed and ready > in a couple more days, so watch

[neonixie-l] Re: Holy (Neon) H !

Now THAT's a good Nephew ! > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to

Re: [neonixie-l] Re: Clock Three Jr. - What Amp for AC adapter?

at 12:12:42 PM UTC-5, Pramanicin wrote: > > Dave, may I ask how you tackled the faceplates? PM me if you can. > > Thanks. > > Nick > > Sent from my iPhone > > On Dec 2, 2017, at 02:00, 'Dave' via neonixie-l <neoni...@googlegroups.com > > wrote: > > If anyo

[neonixie-l] Re: Clock Three Jr. - What Amp for AC adapter?

The proper way to clean acrylic is with a plastic polish like Novus. It comes in 3 versions, labeled 1, 2 or 3, depending on the level of scratch you are trying to remove. However, you can just use the mildest version, #1, as a cleaner. On Wednesday, November 29, 2017 at 7:28:29 PM UTC-5,

[neonixie-l] Re: Clock Three Jr. - What Amp for AC adapter?

If anyone is interested in making one of these, I did a run of the PCBs for my own use have have some extras that I would sell. Just hit the 'reply privately' option to me if interested. cheers, david On Wednesday, November 29, 2017 at 7:28:29 PM UTC-5, Dman777 wrote: > > I have a Clock Three

[neonixie-l] Re: OT: Eagle is now subscription-based

Wow... guess I need to dig into the impact of this and NOT update my current EAGLE version! On Sunday, August 13, 2017 at 9:21:24 AM UTC-4, Nick wrote: > > As all Eagle users will know, Eagle was acquired from Premier Farnell at > the start of the year and Eagle 8, the new version, has a

[neonixie-l] Re: OT: Eagle is now subscription-based

That seems the same as before. this may be just a rebranding effort. Also, if you don't know, if you have access to an email address that ends in .edu, you can get a free license for the unrestricted 'lite' version. The key advantage of this version is that you can have a board up to 10x10cm

[neonixie-l] OT Data on old National clock module

Apologies for the OT post, but this seems like the sort of thing someone here might have the answer to- I need the datasheet for an MA1022- (not the MA1002, which was much more common). None of my old National data books have it and google tells me nothing about it. DaveB, NZ -- You received

[neonixie-l] Re: Shameless Plug: Arduino Shield for a Dekatron

Very Nicely done ! On Thursday, June 1, 2017 at 12:53:22 AM UTC-4, Paul Andrews wrote: > > Because we are all about clocks. Here is a clock implemented using this > shield: https://youtu.be/LNCbABuIcr0 > The display looks flickery in the video, but it isn't in real life. I need > to tidy the

[neonixie-l] Re: Raspberry PI controlled Nixie display

These work great. If anyone wants to try one, I have some extra PCBs I can sell. On Thursday, March 30, 2017 at 6:10:07 AM UTC-4, okniew wrote: > > I also found 1 more place having exactly what I was looking for, although > at a rather steep price.. > >

[neonixie-l] Re: Radioactive Nixies - Study

*Norskman*, I have privately replied. Please do the same or email me so we don't fill up this thread with posts. thanks -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an

RE: [neonixie-l] Re: Wanted: best few photos of Nixies in military equipment

John May not be exactly what you are after but a poke round this site and associated links might be worthwhile. http://watkins-johnson.terryo.org/surveillance-systems/RS-160/RS-160.htm DaveB, NZ From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of JohnK

[neonixie-l] Re: Fake nixie power supply on eBay!!!

How do you sell your supplies? I don't see how to do that on your website? On Thursday, September 29, 2016 at 11:51:42 AM UTC-4, 严泽远 wrote: > > Recently I got some emails from ebay buyers, they claimed the NCH6100HV > Nixie Power Supply they bought from other eBay sellers can not works and >

Re: [neonixie-l] First nixie clock

Well done! I'd be interested in the schematic for the high voltage psu- have been toying with using the 34063 for that myself. DaveB, NZ - Original Message - From: "newxito" To: "neonixie-l" Sent: Tuesday, September 27, 2016 10:18 AM

[neonixie-l] Re: T-Shirts are finally available. Dekatron and Magic Eye shirts from discussion earlier this year.

S W E E T S H I R T S ! Fair price too for a custom tee. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to

Re: [neonixie-l] Playing with E1T-tubes & restoring them

/philips%20counting%20modules/ but feel free to upload them anywhere perhaps more appropriate. We dont seem to have a files section on this group? DaveB, NZ - Original Message - From: "Dave Brown" <tract...@ihug.co.nz> To: <neonixie-l@googlegroups.com> Sent: Thursday, A

Re: [neonixie-l] Playing with E1T-tubes & restoring them

let them get wet- they will just slide off-I'm speaking from bitter experience on this. Dave B, NZ - Original Message - From: "Per Jensen" <elektronikbik...@gmail.com> To: <neonixie-l@googlegroups.com> Sent: Thursday, August 04, 2016 12:11 AM Subject: [neonix

[neonixie-l] Re: My Project: Nixie Tube Kitchen Timer

*This is very creative and nicely executed.I too would like to see the KiCAD files if possible.* -- You received this message because you are subscribed to the

[neonixie-l] Re: Dekatron T-Shirt

In case anyone feels the need for this Keith is a friend and I can verify the fact he is the creator and owner of these shirts ! -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from

[neonixie-l] Re: My CRT Clock

Super Nice. Thanks for sharing. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to

[neonixie-l] Free Shipping at Arrow electronics this week

Arrow is currently offering free shipping this week. www.arrow.com A nice deal if you need a few bits and pieces. For example, you can get the ever popular Mill-Max mounting pins, in 250 qty for 16 cents a pin which seems to be a good deal. Mill Max Pins link

[neonixie-l] Re: Scope clock in plastic case

Yes, please offer a partial kit, a bare PCB, and a completed PCB. Simply Awesome. On Thursday, February 18, 2016 at 8:08:04 PM UTC-5, nixiebunny wrote: > > All, > > I got my scope clock to work, and put it in a clear acrylic case. The > FLW is not coded yet, and there's no GPS, but the DS1307

[neonixie-l] Re: Arduino scope clock taking shape

A lovely looking Board ! Can't wait for everything to be published. On Friday, February 12, 2016 at 12:32:56 AM UTC-5, nixiebunny wrote: > > Folks, > > I have been making steady progress on my new Arduino-based, > oscilloscope-shaped scope clock. The code has been converted from > Motorola

[neonixie-l] Re: 3D printable models for Nixie sockets, especially IN-1

FANTASTIC ! Thanks for sharing ! Are there any other sockets that have been created? -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[neonixie-l] Re: GPS modules MKT3339 vs A2235-H

You can get the waveshare unit for $19 shipped off aliexpress:

[neonixie-l] Re: Just one more Little Bad Dog Designs Clock

A wonder ! Just Fantastic. Please keep sharing. > > > > > > > >

[neonixie-l] Re: Scope clock artwork so far

David, If you do consider remote control, I would like to suggest you use an ESP8266 module, like the ESP-01. These are very inexpensive($2), are plug and play(from a hardware perspective) run wifi, and can be loaded with an Arduino bootloader thereby allowing anyone to easily modify it. The

[neonixie-l] Re: Just show you guys what I made

Now THAT is doing it all in one project. The piece is great and your video presentation is first rate. On Saturday, December 12, 2015 at 11:55:26 PM UTC-5, Chaos Hydra wrote: > > Hey guys, if you remember I was asking questions about IV-17 tubes > filament voltage problem. Though there is

[neonixie-l] Re: Linear power supplies for nixies

very informative, thanks. I look forward to the next two installments! On Thursday, September 24, 2015 at 3:52:06 PM UTC-4, gregebert wrote: > > [Forking a new thread from the partially-lighted nixie] > > I've used 3 different linear (ie non-switching) HV supplies in my clock > designs. I'll

[neonixie-l] Re: Seven digit nixie clock

Mitch, This is very nice work indeed ! Thanks for sharing. When you post to github, will it be the code and the diptrace files? I deeply appreciate your willingness to share your work. -- You received this message because you are subscribed to the Google Groups neonixie-l group. To

[neonixie-l] Re: Spotted at the Detroit Makers Faire @ The Henry Ford There be Nixies here!

That is the display of a friend of mine. He's on the list, so I imagine he will comment if he catches this posting. The spinners and the clock with spinner are threeneurons kits. He had about a dozen different nixie and VFD displays to show off. On Tuesday, July 28, 2015 at 9:34:05 AM UTC-4,

[neonixie-l] Re: Need help with a tubehobby clock overheating

I too was going to suggest the switchmode replacement approach. Your heat will go away from the regulator, completely. You can get one shipped to you for less than $9. Click here: Traco regulator http://www.aliexpress.com/item/Traco-module-TSR-1-2465-TSR1-2465/1942822301.html -- You

[neonixie-l] Re: IN-18 Modular Arduino clock progress

I am thrilled to see you two sharing your work and stating that you will share the boards and software as open source. I think that is just great ! -- You received this message because you are subscribed to the Google Groups neonixie-l group. To unsubscribe from this group and stop receiving

Re: [neonixie-l] Sanyo SMI-01 data

:56, Dave Brown tract...@ihug.co.nz wrote: Anyone have operation data for these? I found this pcb recently- its in pretty bad shape but 12 of the 14 SMI-01s are in OK looking physical condition. http://homepages.ihug.co.nz/~tractorb/sanyo%20calc%20display%20pcb.jpg Cheers DaveB, NZ Maybe you

[neonixie-l] Sanyo SMI-01 data

Anyone have operation data for these? I found this pcb recently- its in pretty bad shape but 12 of the 14 SMI-01s are in OK looking physical condition. http://homepages.ihug.co.nz/~tractorb/sanyo%20calc%20display%20pcb.jpg Cheers DaveB, NZ -- You received this message because you are

[neonixie-l] Re: All valve/tube clock

Wow! Grahame you have once again done it! I'm still working on my CRT clock. Maybe I'll get to this one one day too. Quite the accomplishment. On Monday, October 6, 2014 10:09:38 AM UTC-4, Sgitheach wrote: Hi I have been working on a new trigger tube clock that uses the Z700U trigger

[neonixie-l] Re: Great new clock....

This is a great blog. Instead of skipping the messy parts, you show it all and will save others time and money. I would like to see you to post your code. Here is another word clock. What I like is that it show the process of creating and more importantly, mounting a stencil set of words:

Re: [neonixie-l] Digest for neonixie-l@googlegroups.com - 1 update in 1 topic

way. You HAVE to follow the instructions closely or you will goof something up, I'm sure if it. cheers, Dave B. On 6/23/2014 12:55 AM, neonixie-l@googlegroups.com wrote:   Today's topic summary Group: http://groups.google.com/gro

Re: [neonixie-l] About this type edge lit display.

the integrating housing and they are not too bad. I've got quite a collection now of unsuitable high intensity white LEDs! Morris On Monday, 19 May 2014 09:37:22 UTC+10, Dave Brown wrote: Yes-those KGM displays are really quite interesting. Has anyone come up with an LED replacement for the bulbs

Re: [neonixie-l] About this type edge lit display.

Yes-those KGM displays are really quite interesting. Has anyone come up with an LED replacement for the bulbs in them? DaveB, Christchurch, NZ - Original Message - From: Bill S bilt...@gmail.com To: neonixie-l@googlegroups.com Sent: Monday, May 19, 2014 7:07 AM Subject: Re:

[neonixie-l] Re: HV PSU design based on the TPS40210

Excellent writeup. There is a lot here that I will be digesting for awhile. Thanks for sharing. By any chance, did you price any options for assembly of the smd components? What method do you use to bake your own? -- You received this message because you are subscribed to the Google Groups

Re: [neonixie-l] Finished restoring a TIMEON 2000, motor driven Nixie clock from 1968!

Interesting. Great restoration. The Telechron 8B01 (1934) digital clock used a similar synchronous motor and cams etc arrangement to drive its number drums-different mechanical arrangement of course but much the same mechanical principles in use. DaveB, NZ - Original Message -

Re: [neonixie-l] Cold Cathode Tubes (JB Dance) available in reprint...

You can download it as a pdf from there too, as well as a few other formats. DaveB, NZ - Original Message - From: Dan Hollis parkxz9aw...@anime.net To: neonixie-l@googlegroups.com Sent: Friday, January 10, 2014 7:52 AM Subject: Re: [neonixie-l] Cold Cathode Tubes (JB Dance) available

Re: [neonixie-l] My latest clock

Well Morris spent some time in Whangarei, which is in the North Island --- I can safely say this, being from the South Island of NZ Good one, Morris, BTW! Damned impressive! DaveB, Christchurch, NZ - Original Message - From: Quixotic Nixotic nixci...@jsdesign.co.uk To:

[neonixie-l] Re: Electric Imp

Make that three -- You received this message because you are subscribed to the Google Groups neonixie-l group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to

[neonixie-l] Has anyone bought, built or evaluated this kit?

Any reviews or comments? ebay in-14 clock kithttp://www.ebay.com/itm/Nixie-Clock-IN-14-Digit-Tubes-Tube-KIT-PCB-and-controller-/281117781190?pt=US_Digital_Clocks_Clock_Radioshash=item4173ececc6 -- You received this message because you are subscribed to the Google Groups neonixie-l group. To

[neonixie-l] Re: Russian Polyatron A-201 driving a Burroughs B-5092 Nixie!

A W E S O M E. Can you post the circuit? -- You received this message because you are subscribed to the Google Groups neonixie-l group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an

[neonixie-l] Re: My first Nixie clock - video!

Very nicely done with a feature rich options set ! I would be interested in multiple blank PCBs. Please offer these in addition to kits, Thanks ! -- You received this message because you are subscribed to the Google Groups neonixie-l group. To post to this group, send an email to

[neonixie-l] Re: Nixie supplier for your projects

Vitaly, How about giving us the name of your company and website? Also, how about offering the group a discount to try your products? On Friday, July 27, 2012 8:07:50 PM UTC-4, Vitaly Nart wrote: Hi, I am glad that many peoples have interest in nixie tubes. We can offer you many nixie tubes

[neonixie-l] Re: Nixie thermometer in Elektor journal

Has anyone downloaded and read the .pdf? Is there anything of special note in it that can't be gleaned from the PCB silkscreen and BOM? The pic hex file seems to be in the source zip file. This should allow for a direct creation of the needed pic and for those with the correct compilier setup

Re: [neonixie-l] Nixie thermometer in Elektor journal

In the article, the author states that F is not on the IN-19 tube he used and that is why there is no Fahrenheit feature. Personally, I would displayed Fahrenheit after the C reading and simply blanked the IN-19. On Tuesday, July 3, 2012 9:23:36 PM UTC-4, Michail wrote: I would think that

Re: [neonixie-l] Nixie thermometer in Elektor journal

Done, article retrieved if anyone has questions, just post and I'll answer. On Tuesday, July 3, 2012 7:23:13 PM UTC-4, charles wrote: On 12-07-03 06:46 AM, Huggermugger wrote: Guess temperatures in Centigrades as the designer propably is from Dutchland (Holland) (Netherlands that is).

[neonixie-l] Re: www.gstube.com - Real or ripoff ?

payment service of 5%. Another note: Their IN-17's do NOT come with the plastic spacer. Anyone have a source for A-106/7/8 dekatrons? On Feb 6, 9:34 pm, Dave ukewarr...@yahoo.com wrote: Has anyone ordered fromwww.gstube.comand actually received product? -- You received this message because

[neonixie-l] Re: Another shameless plug - Z302C DEKATRON with bezel

Is there any reason why you wouldn't ship this to the USA? -- You received this message because you are subscribed to the Google Groups neonixie-l group. To post to this group, send an email to neonixie-l@googlegroups.com. To unsubscribe from this group, send email to

[neonixie-l] Re: FS: Shameless Plug Time - Dekatron Spinner Kits

I got my two spinner boards and they look great. I had to order an OG series Dekatron, since I only had 101's. The boards are through hole plated with an extensive silk screen. Excellent kit ! Thanks. -- You received this message because you are subscribed to the Google Groups neonixie-l

[neonixie-l] Re: www.gstube.com - Real or ripoff ?

this changes, I will let the group know. They are hard to deal with because they only accept moneybrokers which is way harder to deal with than paypal in my opinion. On Feb 6, 9:34 pm, Dave ukewarr...@yahoo.com wrote: Has anyone ordered fromwww.gstube.comand actually received product? -- You

[neonixie-l] www.gstube.com - Real or ripoff ?

Has anyone ordered from www.gstube.com and actually received product? -- You received this message because you are subscribed to the Google Groups neonixie-l group. To post to this group, send an email to neonixie-l@googlegroups.com. To unsubscribe from this group, send email to

[neonixie-l] Re: OT: Shipping USA to Germany

I recently received some packages FROM Germany. Sometimes, a month is not unusual. Electronics can often sit in customs for awhile waiting to be opened. On May 26, 12:39 pm, threeneurons threeneur...@yahoo.com wrote: For the last few years, I've been selling off stuff on eBay, including nixie

[neonixie-l] Re: Nixie Tube Power Supply

I would like to see you offer the bare PCB for sale. -- You received this message because you are subscribed to the Google Groups neonixie-l group. To post to this group, send an email to neonixie-l@googlegroups.com. To unsubscribe from this group, send email to

[neonixie-l] Re: 6 Digit Direct-Drive B7971 clock kit

Understood, just wanted you to add my name to the count when you have your PCB's run. Thanks! On Mar 3, 6:20 pm, MichaelB mbari...@dslextreme.com wrote: HI Dave, per my earlier response, we are still working on the PCB redesign. On Mar 3, 6:37 am, Dave ukewarr...@yahoo.com wrote: I would

[neonixie-l] Happy with service and prices at http://tubes-store.com

As an fyi... I placed an order for several tubes from http://tubes-store.com. ( I am not associated with these folks in any way other then being a new customer) The have some especially good deals on IN-12's IN-2''s. They actually have driver chips available for a 90 cents each. I especially

[neonixie-l] Re: 6 Digit Direct-Drive B7971 clock kit

I would be interested in a PCB and access to either the uP hex file or a burned uP. On Feb 25, 2:21 pm, MichaelB mbari...@dslextreme.com wrote: To all, As some of you may know, Carl Ott of this forum has done a wonderful 6 digit direct-drive clock design for the B7971. I have been working

[neonixie-l] Re: bluetooth-enabled b7971s almost ready..

Wow, this is an awesome enhancement ! Do you have to change the code to support this or is it all in the hardware? I also love the fact you are sharing your work. Keep it up. On Feb 28, 5:34 pm, coggs bob.coggesh...@gmail.com wrote: The bluetooth-enabled B7971 version of my nixie system is