Greetings,
I inherited an SNMP table with the following definition. Before I open my mouth
and complain and make a fool of myself, I would like to know from the experts
that the table definition is correct and perhaps it is the way I used mib2c to
compile it that is the problem. BTW, I used mib
Greetings,
I have a MIB file with several tables, some of them have rowStatus entries,
some of them don't have rowStatus entries.
I used mb2c on all the tables with mib2c.iterate.conf configuration file since
the data is external to the agent. I have no problem with the tables that have
the ro
= Timeticks: (2833) 0:00:28.33
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-MIB::authenticationFailure
SNMPv2-MIB::snmpTrapEnterprise.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
Mostafa Kassem
___
Net-snmp-users mailing list
Net-snmp
Thank you, sir. You are a gentleman and a scholar.
I am using 5.8
All the best,
Mostafa
From: Anders Wallin
Sent: Friday, February 22, 2019 2:56 AM
To: Mostafa Kassem
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: AgentX reconnect time
It's not working in 5.7.3 either and w/
couldn’t
find an answer.
It is still 15 seconds of disconnection.
Thanks again,
Mostafa
From: Anders Wallin
Sent: Thursday, February 21, 2019 2:57 AM
To: Mostafa Kassem
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: AgentX reconnect time
Hi Mostafa,
you need to set it in the config
When we restart the snmpd, the agent detects that the snmpd is no longer
running and disconnects, waits 15 seconds and then connects to the snmpd again.
AgentX master disconnected us, reconnecting in 15
I would like to reduce this time to 5 seconds.
Is this time specifieded in agentXPingInterva
Greetings,
Our trap sink parameters are modified per 2 MIB entries, one for the IP address
and one for the port.
We would like to set the trap sink programmatically on powerup and when we
receive an snmp request.
On powerup and every time we receive a request to change the trap sink IP
address