[patch 2/2] natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards

2007-02-19 Thread Mark Brown 
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI
bus with an oversized EEPROM using a direct MII-MII connection with no
PHY.  This patch adds a new device table entry supporting these cards.

Signed-Off-By: Mark Brown [EMAIL PROTECTED]

---

This revision removes extra braces from the previous version.

Index: linux/drivers/net/natsemi.c
===
--- linux.orig/drivers/net/natsemi.c2007-02-19 10:16:50.0 +
+++ linux/drivers/net/natsemi.c 2007-02-19 10:18:25.0 +
@@ -244,6 +244,9 @@
MII_EN_SCRM = 0x0004,   /* enable scrambler (tp) */
 };
 
+enum {
+   NATSEMI_FLAG_IGNORE_PHY = 0x1,
+};
 
 /* array of board data directly indexed by pci_tbl[x].driver_data */
 static const struct {
@@ -251,10 +254,12 @@
unsigned long flags;
unsigned int eeprom_size;
 } natsemi_pci_info[] __devinitdata = {
+   { Aculab E1/T1 PMXc cPCI carrier card, NATSEMI_FLAG_IGNORE_PHY, 128 },
{ NatSemi DP8381[56], 0, 24 },
 };
 
 static const struct pci_device_id natsemi_pci_tbl[] __devinitdata = {
+   { PCI_VENDOR_ID_NS, 0x0020, 0x12d9, 0x000c, 0, 0, 0 },
{ PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ } /* terminate list */
 };
@@ -811,7 +816,10 @@
np-hands_off = 0;
np-intr_status = 0;
np-eeprom_size = natsemi_pci_info[chip_idx].eeprom_size;
-   np-ignore_phy = 0;
+   if (natsemi_pci_info[chip_idx].flags  NATSEMI_FLAG_IGNORE_PHY)
+   np-ignore_phy = 1;
+   else
+   np-ignore_phy = 0;
 
/* Initial port:
 * - If configured to ignore the PHY set up for external.

--
You grabbed my hand and we fell into it, like a daydream - or a fever.
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [patch 2/2] natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards

2007-02-17 Thread Jeff Garzik 

Mark Brown wrote:

Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI
bus with an oversized EEPROM using a direct MII-MII connection with no
PHY.  This patch adds a new device table entry supporting these cards.

Signed-Off-By: Mark Brown [EMAIL PROTECTED]



@@ -811,7 +816,11 @@
np-hands_off = 0;
np-intr_status = 0;
np-eeprom_size = natsemi_pci_info[chip_idx].eeprom_size;
-   np-ignore_phy = 0;
+   if (natsemi_pci_info[chip_idx].flags  NATSEMI_FLAG_IGNORE_PHY) {
+   np-ignore_phy = 1;
+   } else {
+   np-ignore_phy = 0;
+   }



I ACK the patch itself, but since you have to resend anyway, please kill 
the braces surrounding the above single-C-stmt lines.


-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[patch 2/2] natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards

2007-02-14 Thread Mark Brown 
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI
bus with an oversized EEPROM using a direct MII-MII connection with no
PHY.  This patch adds a new device table entry supporting these cards.

Signed-Off-By: Mark Brown [EMAIL PROTECTED]

Index: linux/drivers/net/natsemi.c
===
--- linux.orig/drivers/net/natsemi.c2007-02-12 18:09:44.0 +
+++ linux/drivers/net/natsemi.c 2007-02-12 18:09:59.0 +
@@ -244,6 +244,9 @@
MII_EN_SCRM = 0x0004,   /* enable scrambler (tp) */
 };
 
+enum {
+   NATSEMI_FLAG_IGNORE_PHY = 0x1,
+};
 
 /* array of board data directly indexed by pci_tbl[x].driver_data */
 static const struct {
@@ -251,10 +254,12 @@
unsigned long flags;
unsigned int eeprom_size;
 } natsemi_pci_info[] __devinitdata = {
+   { Aculab E1/T1 PMXc cPCI carrier card, NATSEMI_FLAG_IGNORE_PHY, 128 },
{ NatSemi DP8381[56], 0, 24 },
 };
 
 static const struct pci_device_id natsemi_pci_tbl[] __devinitdata = {
+   { PCI_VENDOR_ID_NS, 0x0020, 0x12d9, 0x000c, 0, 0, 0 },
{ PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ } /* terminate list */
 };
@@ -811,7 +816,11 @@
np-hands_off = 0;
np-intr_status = 0;
np-eeprom_size = natsemi_pci_info[chip_idx].eeprom_size;
-   np-ignore_phy = 0;
+   if (natsemi_pci_info[chip_idx].flags  NATSEMI_FLAG_IGNORE_PHY) {
+   np-ignore_phy = 1;
+   } else {
+   np-ignore_phy = 0;
+   }
 
/* Initial port:
 * - If configured to ignore the PHY set up for external.

--
You grabbed my hand and we fell into it, like a daydream - or a fever.
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html