On Thu, 2008-11-06 at 15:41 -0700, James Ward wrote:
> Thanks Dan.
>
> Here is the output:
> NetworkManager: Activation (ttyACM0) starting connection 'Auto
> GSM network connection'
> NetworkManager: (ttyACM0): device state change: 3 -> 4
> NetworkManager: Activation (ttyACM0) Stage 1 of 5 (
Sorry for stepping in again but...
The error is because NM normally send ATZ.
The F3507g module doesn't understand this command, it is using AT&F
instead for reset.
James Ward wrote:
Thanks Dan.
Here is the output:
NetworkManager: Activation (ttyACM0) starting connection 'Auto
GSM netwo
Thanks Dan.
Here is the output:
NetworkManager: Activation (ttyACM0) starting connection 'Auto
GSM network connection'
NetworkManager: (ttyACM0): device state change: 3 -> 4
NetworkManager: Activation (ttyACM0) Stage 1 of 5 (Device
Prepare) scheduled...
NetworkManager: Activation (ttyACM0)
Hello James,
Ok, I'll try describe a process here to get this modem running.
First, the thread you point to could make it work with a ppp connection.
That is not the way to do it though, since it has a much more efficient
way to do communication.
Here is a alternative howto:
1. Patch your ker
On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote:
> Hi,
>
> I just recently upgraded to the Lenovo W500 laptop which has a built-in
> Ericsson F2507g WAN card. Unfortunately I can't get this new card to
> work with NM because it needs to be turned on first. There is a thread
> about how to do
