Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Holger Selover-Stephan]

I ordered from what looked like the same kit for a little less: 

https://www.ebay.com/itm/PETCOCK-REBUILD-GASKET-KIT-CB650-CB650SC-CB750SC-CB900-CB1000-CB1100-CB1100F/172153138754
 


…but it doesn’t fit the petcock on the '83 650SC. The seller explained his kit 
“is for the petcock with the settlement bowl”, which, evidently, the 650’s 
isn’t. 

Back to the hunt…

Holger

> On Sep 1, 2019, at 8:43 AM, Slow4  wrote:
> 
> I used the kit in the link as well as a NOS valve bowl o-ring. Necessary to 
> buy both and well worth it!
> 
> https://www.ebay.com/itm/HONDA-FUEL-PETCOCK-REBUILD-GASKET-KIT-CB650-CB650SC-CB750SC-CB900-CB1000-CB1100/121240091093

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/C8835916-186A-432E-88CB-232A12548B7B%40shadowbrush.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Holger Selover-Stephan]

Perfect, thanks!

> On Sep 1, 2019, at 8:43 AM, Slow4  wrote:
> 
> I used the kit in the link as well as a NOS valve bowl o-ring. Necessary to 
> buy both and well worth it!
> 
> https://www.ebay.com/itm/HONDA-FUEL-PETCOCK-REBUILD-GASKET-KIT-CB650-CB650SC-CB750SC-CB900-CB1000-CB1100/121240091093?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/6BBA5376-890A-42FD-AFCC-2BEBB03498D8%40shadowbrush.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Slow4]

I used the kit in the link as well as a NOS valve bowl o-ring. Necessary to buy 
both and well worth it!

https://www.ebay.com/itm/HONDA-FUEL-PETCOCK-REBUILD-GASKET-KIT-CB650-CB650SC-CB750SC-CB900-CB1000-CB1100/121240091093?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/290bf69e-3278-40f7-8aa2-e41f5e3cf59b%40googlegroups.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Holger Selover-Stephan]

Forgot to add the link to the petcock on eBay: 
https://www.ebay.com/itm/Fuel-Valve-Petcock-Assembly-For-Honda-CB650SC-Nighthawk-1983-85/202339980612?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

For the $8, I might just order another one, throw it away and keep the 
gasket for the 700S. Bloody waste, but only source I know of. 

Holger

On Saturday, August 31, 2019 at 9:41:47 PM UTC-7, Holger Selover-Stephan 
wrote:
>
> I drilled out the rivets on the 650SC petcock and found that 
> part-# 16953-283-000 does *not* fit. At least not on a 650SC (and 
> probably also not on a 700S). Attached a photo for comparison. 
>
> Luckily, I had bought a cheapish petcock from eBay a while back. That one 
> was advertised to fit the 650SC (and of course does not). But it had the 
> right size gasket! 
>
> If anyone know the correct part number and a source, that would be 
> helpful. Still need to do the petcock on the 700S, which is also leaking 
> even after a rebuild. 
>
> Holger
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/9ccdee6e-c332-4eac-887e-7e638e582c41%40googlegroups.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Tommy Hill]

That’s it!

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/ad278776-a21b-43a5-87af-eaf572640784%40googlegroups.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Holger Selover-Stephan]

I think you’re looking for Honda Part# 16953-283-000. I ordered one myself, but 
have yet to install it, so can’t say for sure it’s the right one.

https://www.partzilla.com/product/honda/16953-283-000 


Holger

> On Jul 25, 2019, at 5:15 AM, Slow4  wrote:
> 
> Sorry to dig up an old thread, I’m chasing a leaky Petcock myself and can’t 
> find the correct rebuild kit. I think the leaky part is the x-ring behind the 
> turning mechanism. Does anybody know where I can find this replacement gasket?

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/BC180887-5AB3-4D50-8667-4AB1F12DCA99%40shadowbrush.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

The ring you are talking about behind the turn knob is secured by rivets.
You have to drill them out to get to it, (then tap and screw new screws to
put it back together). The rebuild kit does not include that metal pressure
ring.
Start with the other side, the vacuum rebuild kit. I would check them first
before ordering anything. Sometimes they just need cleaning.

On Thu, Jul 25, 2019 at 8:19 AM Slow4  wrote:

> Sorry to dig up an old thread, I’m chasing a leaky Petcock myself and
> can’t find the correct rebuild kit. I think the leaky part is the x-ring
> behind the turning mechanism. Does anybody know where I can find this
> replacement gasket?
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/nighthawk_lovers/0904c401-bfb7-4df7-a4e9-0e6368af0e8c%40googlegroups.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/CAGg-qp0xucK1%2BiOKA%3D%2B%2BkdCWEAKFp-YkKPNW5cAA2a5GuxOJxQ%40mail.gmail.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Slow4]

Sorry to dig up an old thread, I’m chasing a leaky Petcock myself and can’t 
find the correct rebuild kit. I think the leaky part is the x-ring behind the 
turning mechanism. Does anybody know where I can find this replacement gasket?

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/0904c401-bfb7-4df7-a4e9-0e6368af0e8c%40googlegroups.com.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Quartermaster35]

That is great to hear...(thanks for posting) .I had to order the one 
from EBay also as the one from Scrambler listed earlier WAS NOT the correct 
size..(good thing these parts are cheap)

I will post more pics of the assembly etc when I get around to assembling

On Wednesday, April 4, 2018 at 11:21:01 AM UTC-5, Barnes Cole wrote:

>   I just rebuilt the petcock on my 85 700SC using the ebay listing you 
> mentioned.  worked perfectly.   The hole in the middle of the gasket makes 
> not difference.The rubber oring in the picture (with the indent) gets 
> replaced with a new o-ring.   
>
> On Thursday, March 29, 2018 at 7:43:57 AM UTC-4, Quartermaster35 wrote:
>>
>> I think that it is supposed to have a round gasket over it (indent in the 
>> rubber for it to set in)..   I will find out if one of the gaskets in 
>> my set fits it tonight
>>
>> This is a link to where I purchased my kit from: 
>>
>>
>> https://scrambler-cycle.myshopify.com/collections/honda-cb500-cb550/products/honda-cb77-cl77-cb750-cb160-cb500-cb350f-mt250-petcock-rebuild-kit-new-repro
>>
>>
>>
>> Another alternative that I found: a kit on Ebay that is made for this 
>> specifically for this petcock.seller is opensps...   title is HONDA 
>> FUEL PETCOCK REBUILD GASKET KIT CB650 CB650SC CB750SC CB900 CB1000 CB1100 
>> $21.99 for kit and it includes the stainless screws
>>
>>
>> On Wednesday, March 28, 2018 at 9:51:15 PM UTC-5, kiwinPA wrote:
>>
>>>
>>> I mean, its the same
>>>
>>> On Wed, Mar 28, 2018 at 10:50 PM Graham Rogers  
>>> wrote:
>>>

 Yes, its the dame

 On Wed, Mar 28, 2018 at 10:22 PM Quartermaster35  
 wrote:

> I will.
>
> Take a look t the rubber gasket around this piece on yours and let me 
> know if it looks the same.. ?
>
> On Wednesday, March 28, 2018 at 8:50:56 PM UTC-5, kiwinPA wrote:
>
>>
>> If it fits and doesnt leak, please let me know. I will get the same
>>
>> On Wed, Mar 28, 2018 at 9:48 PM Quartermaster35  
>> wrote:
>>
>>> OK..I drilled out the rivets and removed the gasket.  I 
>>> sure hope that the one I ordered with the additional hole works.
>>>
>>> The gasket was very hard and somewhat brittle... it didn't 
>>> exactly just come out, it was very much stuck in place.
>>>
>>> The diameter of the gasket is 2.8 MM
>>>
>>>
>>>
>>>
>>>
>>> On Tuesday, March 27, 2018 at 6:39:07 PM UTC-5, kiwinPA wrote:
>>>

 Mine came today but didnt even include any washer.

 On Tue, Mar 27, 2018 at 4:22 PM Graham Rogers <
 grahamjo...@gmail.com> wrote:

> That's what we are hoping, as long as everything else aligns
>
> On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  
> wrote:
>
>> He hole in the middle shouldn’t matter.  The valve rotates to 
>> align with the larger holes to allow gas to go nowhere, from main 
>> tank, and 
>> from reserve.  Last hole goes around a peg (or bump) to prevent it 
>> turning.  The center hole should not come into play.
>>
>> --
>> You received this message because you are subscribed to the 
>> Google Groups "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, 
>> send an email to nighthawk_love...@googlegroups.com.
>> To post to this group, send email to nighthaw...@googlegroups.com
>> .
>> Visit this group at 
>> https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it, 
>>> send an email to nighthawk_love...@googlegroups.com.
>>> To post to this group, send email to nighthaw...@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> -- 
> You received this message because you are subscribed to the Google 
> Groups "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to nighthawk_love...@googlegroups.com.
> To post to this group, send email to nighthaw...@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>


-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this 

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

['Barnes Cole' via Nighthawk Motorcycle Lovers!]

  I just rebuilt the petcock on my 85 700SC using the ebay listing you 
mentioned.  worked perfectly.   The hole in the middle of the gasket makes 
not difference.The rubber oring in the picture (with the indent) gets 
replaced with a new o-ring.   

On Thursday, March 29, 2018 at 7:43:57 AM UTC-4, Quartermaster35 wrote:
>
> I think that it is supposed to have a round gasket over it (indent in the 
> rubber for it to set in)..   I will find out if one of the gaskets in 
> my set fits it tonight
>
> This is a link to where I purchased my kit from: 
>
>
> https://scrambler-cycle.myshopify.com/collections/honda-cb500-cb550/products/honda-cb77-cl77-cb750-cb160-cb500-cb350f-mt250-petcock-rebuild-kit-new-repro
>
>
>
> Another alternative that I found: a kit on Ebay that is made for this 
> specifically for this petcock.seller is opensps...   title is HONDA 
> FUEL PETCOCK REBUILD GASKET KIT CB650 CB650SC CB750SC CB900 CB1000 CB1100 
> $21.99 for kit and it includes the stainless screws
>
>
> On Wednesday, March 28, 2018 at 9:51:15 PM UTC-5, kiwinPA wrote:
>
>>
>> I mean, its the same
>>
>> On Wed, Mar 28, 2018 at 10:50 PM Graham Rogers  
>> wrote:
>>
>>>
>>> Yes, its the dame
>>>
>>> On Wed, Mar 28, 2018 at 10:22 PM Quartermaster35  
>>> wrote:
>>>
 I will.

 Take a look t the rubber gasket around this piece on yours and let me 
 know if it looks the same.. ?

 On Wednesday, March 28, 2018 at 8:50:56 PM UTC-5, kiwinPA wrote:

>
> If it fits and doesnt leak, please let me know. I will get the same
>
> On Wed, Mar 28, 2018 at 9:48 PM Quartermaster35  
> wrote:
>
>> OK..I drilled out the rivets and removed the gasket.  I 
>> sure hope that the one I ordered with the additional hole works.
>>
>> The gasket was very hard and somewhat brittle... it didn't 
>> exactly just come out, it was very much stuck in place.
>>
>> The diameter of the gasket is 2.8 MM
>>
>>
>>
>>
>>
>> On Tuesday, March 27, 2018 at 6:39:07 PM UTC-5, kiwinPA wrote:
>>
>>>
>>> Mine came today but didnt even include any washer.
>>>
>>> On Tue, Mar 27, 2018 at 4:22 PM Graham Rogers  
>>> wrote:
>>>
 That's what we are hoping, as long as everything else aligns

 On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  wrote:

> He hole in the middle shouldn’t matter.  The valve rotates to 
> align with the larger holes to allow gas to go nowhere, from main 
> tank, and 
> from reserve.  Last hole goes around a peg (or bump) to prevent it 
> turning.  The center hole should not come into play.
>
> --
> You received this message because you are subscribed to the Google 
> Groups "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, 
> send an email to nighthawk_love...@googlegroups.com.
> To post to this group, send email to nighthaw...@googlegroups.com.
> Visit this group at 
> https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>
 -- 
>> You received this message because you are subscribed to the Google 
>> Groups "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, 
>> send an email to nighthawk_love...@googlegroups.com.
>> To post to this group, send email to nighthaw...@googlegroups.com.
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
> -- 
 You received this message because you are subscribed to the Google 
 Groups "Nighthawk Motorcycle Lovers!" group.
 To unsubscribe from this group and stop receiving emails from it, send 
 an email to nighthawk_love...@googlegroups.com.
 To post to this group, send email to nighthaw...@googlegroups.com.
 Visit this group at https://groups.google.com/group/nighthawk_lovers.
 For more options, visit https://groups.google.com/d/optout.

>>>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Quartermaster35]

I think that it is supposed to have a round gasket over it (indent in the 
rubber for it to set in)..   I will find out if one of the gaskets in 
my set fits it tonight

This is a link to where I purchased my kit from: 

https://scrambler-cycle.myshopify.com/collections/honda-cb500-cb550/products/honda-cb77-cl77-cb750-cb160-cb500-cb350f-mt250-petcock-rebuild-kit-new-repro



Another alternative that I found: a kit on Ebay that is made for this 
specifically for this petcock.seller is opensps...   title is HONDA 
FUEL PETCOCK REBUILD GASKET KIT CB650 CB650SC CB750SC CB900 CB1000 CB1100 
$21.99 for kit and it includes the stainless screws


On Wednesday, March 28, 2018 at 9:51:15 PM UTC-5, kiwinPA wrote:

>
> I mean, its the same
>
> On Wed, Mar 28, 2018 at 10:50 PM Graham Rogers  > wrote:
>
>>
>> Yes, its the dame
>>
>> On Wed, Mar 28, 2018 at 10:22 PM Quartermaster35 > > wrote:
>>
>>> I will.
>>>
>>> Take a look t the rubber gasket around this piece on yours and let me 
>>> know if it looks the same.. ?
>>>
>>> On Wednesday, March 28, 2018 at 8:50:56 PM UTC-5, kiwinPA wrote:
>>>

 If it fits and doesnt leak, please let me know. I will get the same

 On Wed, Mar 28, 2018 at 9:48 PM Quartermaster35  
 wrote:

> OK..I drilled out the rivets and removed the gasket.  I 
> sure hope that the one I ordered with the additional hole works.
>
> The gasket was very hard and somewhat brittle... it didn't exactly 
> just come out, it was very much stuck in place.
>
> The diameter of the gasket is 2.8 MM
>
>
>
>
>
> On Tuesday, March 27, 2018 at 6:39:07 PM UTC-5, kiwinPA wrote:
>
>>
>> Mine came today but didnt even include any washer.
>>
>> On Tue, Mar 27, 2018 at 4:22 PM Graham Rogers  
>> wrote:
>>
>>> That's what we are hoping, as long as everything else aligns
>>>
>>> On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  wrote:
>>>
 He hole in the middle shouldn’t matter.  The valve rotates to align 
 with the larger holes to allow gas to go nowhere, from main tank, and 
 from 
 reserve.  Last hole goes around a peg (or bump) to prevent it turning. 
  The 
 center hole should not come into play.

 --
 You received this message because you are subscribed to the Google 
 Groups "Nighthawk Motorcycle Lovers!" group.
 To unsubscribe from this group and stop receiving emails from it, 
 send an email to nighthawk_love...@googlegroups.com.
 To post to this group, send email to nighthaw...@googlegroups.com.
 Visit this group at 
 https://groups.google.com/group/nighthawk_lovers.
 For more options, visit https://groups.google.com/d/optout.

>>> -- 
> You received this message because you are subscribed to the Google 
> Groups "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to nighthawk_love...@googlegroups.com.
> To post to this group, send email to nighthaw...@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>
 -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to nighthawk_love...@googlegroups.com .
>>> To post to this group, send email to nighthaw...@googlegroups.com 
>>> .
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

I mean, its the same

On Wed, Mar 28, 2018 at 10:50 PM Graham Rogers 
wrote:

>
> Yes, its the dame
>
> On Wed, Mar 28, 2018 at 10:22 PM Quartermaster35 <
> quartermaste...@gmail.com> wrote:
>
>> I will.
>>
>> Take a look t the rubber gasket around this piece on yours and let me
>> know if it looks the same.. ?
>>
>> On Wednesday, March 28, 2018 at 8:50:56 PM UTC-5, kiwinPA wrote:
>>
>>>
>>> If it fits and doesnt leak, please let me know. I will get the same
>>>
>>> On Wed, Mar 28, 2018 at 9:48 PM Quartermaster35 
>>> wrote:
>>>
 OK..I drilled out the rivets and removed the gasket.  I
 sure hope that the one I ordered with the additional hole works.

 The gasket was very hard and somewhat brittle... it didn't exactly
 just come out, it was very much stuck in place.

 The diameter of the gasket is 2.8 MM





 On Tuesday, March 27, 2018 at 6:39:07 PM UTC-5, kiwinPA wrote:

>
> Mine came today but didnt even include any washer.
>
> On Tue, Mar 27, 2018 at 4:22 PM Graham Rogers 
> wrote:
>
>> That's what we are hoping, as long as everything else aligns
>>
>> On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  wrote:
>>
>>> He hole in the middle shouldn’t matter.  The valve rotates to align
>>> with the larger holes to allow gas to go nowhere, from main tank, and 
>>> from
>>> reserve.  Last hole goes around a peg (or bump) to prevent it turning.  
>>> The
>>> center hole should not come into play.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it,
>>> send an email to nighthawk_love...@googlegroups.com.
>>> To post to this group, send email to nighthaw...@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
 You received this message because you are subscribed to the Google
 Groups "Nighthawk Motorcycle Lovers!" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to nighthawk_love...@googlegroups.com.
 To post to this group, send email to nighthaw...@googlegroups.com.
 Visit this group at https://groups.google.com/group/nighthawk_lovers.
 For more options, visit https://groups.google.com/d/optout.

>>> --
>> You received this message because you are subscribed to the Google Groups
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to nighthawk_lovers+unsubscr...@googlegroups.com.
>> To post to this group, send email to nighthawk_lovers@googlegroups.com.
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

Yes, its the dame

On Wed, Mar 28, 2018 at 10:22 PM Quartermaster35 
wrote:

> I will.
>
> Take a look t the rubber gasket around this piece on yours and let me know
> if it looks the same.. ?
>
> On Wednesday, March 28, 2018 at 8:50:56 PM UTC-5, kiwinPA wrote:
>
>>
>> If it fits and doesnt leak, please let me know. I will get the same
>>
>> On Wed, Mar 28, 2018 at 9:48 PM Quartermaster35 
>> wrote:
>>
>>> OK..I drilled out the rivets and removed the gasket.  I sure
>>> hope that the one I ordered with the additional hole works.
>>>
>>> The gasket was very hard and somewhat brittle... it didn't exactly
>>> just come out, it was very much stuck in place.
>>>
>>> The diameter of the gasket is 2.8 MM
>>>
>>>
>>>
>>>
>>>
>>> On Tuesday, March 27, 2018 at 6:39:07 PM UTC-5, kiwinPA wrote:
>>>

 Mine came today but didnt even include any washer.

 On Tue, Mar 27, 2018 at 4:22 PM Graham Rogers 
 wrote:

> That's what we are hoping, as long as everything else aligns
>
> On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  wrote:
>
>> He hole in the middle shouldn’t matter.  The valve rotates to align
>> with the larger holes to allow gas to go nowhere, from main tank, and 
>> from
>> reserve.  Last hole goes around a peg (or bump) to prevent it turning.  
>> The
>> center hole should not come into play.
>>
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to nighthawk_love...@googlegroups.com.
>> To post to this group, send email to nighthaw...@googlegroups.com.
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to nighthawk_love...@googlegroups.com.
>>> To post to this group, send email to nighthaw...@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

If it fits and doesnt leak, please let me know. I will get the same

On Wed, Mar 28, 2018 at 9:48 PM Quartermaster35 
wrote:

> OK..I drilled out the rivets and removed the gasket.  I sure
> hope that the one I ordered with the additional hole works.
>
> The gasket was very hard and somewhat brittle... it didn't exactly
> just come out, it was very much stuck in place.
>
> The diameter of the gasket is 2.8 MM
>
>
>
>
>
> On Tuesday, March 27, 2018 at 6:39:07 PM UTC-5, kiwinPA wrote:
>
>>
>> Mine came today but didnt even include any washer.
>>
>> On Tue, Mar 27, 2018 at 4:22 PM Graham Rogers 
>> wrote:
>>
>>> That's what we are hoping, as long as everything else aligns
>>>
>>> On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  wrote:
>>>
 He hole in the middle shouldn’t matter.  The valve rotates to align
 with the larger holes to allow gas to go nowhere, from main tank, and from
 reserve.  Last hole goes around a peg (or bump) to prevent it turning.  The
 center hole should not come into play.

 --
 You received this message because you are subscribed to the Google
 Groups "Nighthawk Motorcycle Lovers!" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to nighthawk_love...@googlegroups.com.
 To post to this group, send email to nighthaw...@googlegroups.com.
 Visit this group at https://groups.google.com/group/nighthawk_lovers.
 For more options, visit https://groups.google.com/d/optout.

>>> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

Mine came today but didnt even include any washer.

On Tue, Mar 27, 2018 at 4:22 PM Graham Rogers 
wrote:

> That's what we are hoping, as long as everything else aligns
>
> On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  wrote:
>
>> He hole in the middle shouldn’t matter.  The valve rotates to align with
>> the larger holes to allow gas to go nowhere, from main tank, and from
>> reserve.  Last hole goes around a peg (or bump) to prevent it turning.  The
>> center hole should not come into play.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to nighthawk_lovers+unsubscr...@googlegroups.com.
>> To post to this group, send email to nighthawk_lovers@googlegroups.com.
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

That's what we are hoping, as long as everything else aligns

On Tue, Mar 27, 2018, 4:20 PM Tommy Hill  wrote:

> He hole in the middle shouldn’t matter.  The valve rotates to align with
> the larger holes to allow gas to go nowhere, from main tank, and from
> reserve.  Last hole goes around a peg (or bump) to prevent it turning.  The
> center hole should not come into play.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Tommy Hill]

He hole in the middle shouldn’t matter.  The valve rotates to align with the 
larger holes to allow gas to go nowhere, from main tank, and from reserve.  
Last hole goes around a peg (or bump) to prevent it turning.  The center hole 
should not come into play.

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

Just saw a 1984 700S in a junk yard. It is mostly complete but in bad
shape. Sitting outside for years. I saw the same bike in the owners yard
about 5 years ago. Junk yard only wants $100 for it. Too much work in it
for me. Exhausts and mufflers are good. Engine was good 5 years ago.

On Tue, Mar 27, 2018, 4:04 PM Quartermaster35 
wrote:

> Looks like I'll be finding out too as my order already shipped (with the
> hole).only $13 so no big loss.
>
> I will post pics of what I learn, including the disassembly and tap
> process.
>
> On Tuesday, March 27, 2018 at 9:56:50 AM UTC-5, kiwinPA wrote:
>
>> Yes, that's a cause to. My washer however was brittle and allowing gas to
>> pass between the holes
>>
>> On Tue, Mar 27, 2018, 10:52 AM 'Pike' via Nighthawk Motorcycle Lovers! <
>> nighthaw...@googlegroups.com> wrote:
>>
>>> I recently did the tap screw repair and found that the leaking is caused
>>> by an o ring that fits in a groove around the on off reserve fuel selector.
>>>
>>> On Mar 27, 2018, at 9:29 AM, Graham Rogers 
>>> wrote:
>>>
>>> Wait, wait! We both may have ordered the wrong one. Heres the one out of
>>> the 700S petcock. No hole in the middle, Graham
>>> 
>>> 
>>> Sent from my iPad
>>>
>>> On Mar 27, 2018, at 8:39 AM, Quartermaster35 
>>> wrote:
>>>
>>>
>>> kiwin..
>>>
>>>
>>> is the round gasket with the four holes the part that I need?   I can
>>> get that part for other Honda applications and would take the chance for
>>> $20   just wanted your input before I order it.
>>>
>>> Thanks
>>>
>>>
>>> On Tuesday, March 27, 2018 at 7:26:54 AM UTC-5, Quartermaster35 wrote:
>>>
 Thank you for taking the time to look kiwin

 Brian,   your info is helpful, the only alternative I found was
 $165 on ebay (too much). if I cannot get the new washer, I will
 probably order from the impex web site that you provided (knowing that you
 had success in ordering it from them)

 Thank you both for helping me with this issue.

 On Tuesday, March 27, 2018 at 7:14:49 AM UTC-5, kiwinPA wrote:

>
> Website says unavailable.
>
> On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk
> Motorcycle Lovers!  wrote:
>
>> hope that you get the tapping done without any troubles. I had the
>> same issue and was unsuccesful twice. I ordered a brand new one from
>> https://en.impex-jp.com/ you just need to know the part number. I
>> just did a quick search and the part needed is just the main petcock body
>> part number 16951-MJ1-015
>> 
>> Impex has it for about $65 plus shipping. I hope you don't have to order
>> new. Once again good luck getting the job done with no leaks.
>>
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to nighthawk_love...@googlegroups.com.
>> To post to this group, send email to nighthaw...@googlegroups.com.
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to nighthawk_love...@googlegroups.com.
>>> To post to this group, send email to nighthaw...@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>> 
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to nighthawk_love...@googlegroups.com.
>>> To post to this group, send email to nighthaw...@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to nighthawk_love...@googlegroups.com.
>>> To post to this group, send email to nighthaw...@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To 

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Quartermaster35]

Looks like I'll be finding out too as my order already shipped (with the 
hole).only $13 so no big loss.

I will post pics of what I learn, including the disassembly and tap process.

On Tuesday, March 27, 2018 at 9:56:50 AM UTC-5, kiwinPA wrote:

> Yes, that's a cause to. My washer however was brittle and allowing gas to 
> pass between the holes
>
> On Tue, Mar 27, 2018, 10:52 AM 'Pike' via Nighthawk Motorcycle Lovers! <
> nighthaw...@googlegroups.com > wrote:
>
>> I recently did the tap screw repair and found that the leaking is caused 
>> by an o ring that fits in a groove around the on off reserve fuel selector.
>>
>> On Mar 27, 2018, at 9:29 AM, Graham Rogers > > wrote:
>>
>> Wait, wait! We both may have ordered the wrong one. Heres the one out of 
>> the 700S petcock. No hole in the middle, Graham
>> 
>> 
>> Sent from my iPad
>>
>> On Mar 27, 2018, at 8:39 AM, Quartermaster35 > > wrote:
>>
>>
>> kiwin..
>>
>>
>> is the round gasket with the four holes the part that I need?   I can get 
>> that part for other Honda applications and would take the chance for 
>> $20   just wanted your input before I order it.
>>
>> Thanks
>>
>>
>> On Tuesday, March 27, 2018 at 7:26:54 AM UTC-5, Quartermaster35 wrote:
>>
>>> Thank you for taking the time to look kiwin
>>>
>>> Brian,   your info is helpful, the only alternative I found was 
>>> $165 on ebay (too much). if I cannot get the new washer, I will 
>>> probably order from the impex web site that you provided (knowing that you 
>>> had success in ordering it from them)
>>>
>>> Thank you both for helping me with this issue.
>>>
>>> On Tuesday, March 27, 2018 at 7:14:49 AM UTC-5, kiwinPA wrote:
>>>

 Website says unavailable.

 On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk 
 Motorcycle Lovers!  wrote:

> hope that you get the tapping done without any troubles. I had the 
> same issue and was unsuccesful twice. I ordered a brand new one from 
> https://en.impex-jp.com/ you just need to know the part number. I 
> just did a quick search and the part needed is just the main petcock body 
> part number 16951-MJ1-015 
> 
>  
> Impex has it for about $65 plus shipping. I hope you don't have to order 
> new. Once again good luck getting the job done with no leaks.
>
> -- 
> You received this message because you are subscribed to the Google 
> Groups "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to nighthawk_love...@googlegroups.com.
> To post to this group, send email to nighthaw...@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>
 -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to nighthawk_love...@googlegroups.com .
>> To post to this group, send email to nighthaw...@googlegroups.com 
>> .
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
>> 
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to nighthawk_love...@googlegroups.com .
>> To post to this group, send email to nighthaw...@googlegroups.com 
>> .
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to nighthawk_love...@googlegroups.com .
>> To post to this group, send email to nighthaw...@googlegroups.com 
>> .
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

Yes, that's a cause to. My washer however was brittle and allowing gas to
pass between the holes

On Tue, Mar 27, 2018, 10:52 AM 'Pike' via Nighthawk Motorcycle Lovers! <
nighthawk_lovers@googlegroups.com> wrote:

> I recently did the tap screw repair and found that the leaking is caused
> by an o ring that fits in a groove around the on off reserve fuel selector.
>
> On Mar 27, 2018, at 9:29 AM, Graham Rogers 
> wrote:
>
> Wait, wait! We both may have ordered the wrong one. Heres the one out of
> the 700S petcock. No hole in the middle, Graham
> 
> 
> Sent from my iPad
>
> On Mar 27, 2018, at 8:39 AM, Quartermaster35 
> wrote:
>
>
> kiwin..
>
>
> is the round gasket with the four holes the part that I need?   I can get
> that part for other Honda applications and would take the chance for
> $20   just wanted your input before I order it.
>
> Thanks
>
>
> On Tuesday, March 27, 2018 at 7:26:54 AM UTC-5, Quartermaster35 wrote:
>
>> Thank you for taking the time to look kiwin
>>
>> Brian,   your info is helpful, the only alternative I found was
>> $165 on ebay (too much). if I cannot get the new washer, I will
>> probably order from the impex web site that you provided (knowing that you
>> had success in ordering it from them)
>>
>> Thank you both for helping me with this issue.
>>
>> On Tuesday, March 27, 2018 at 7:14:49 AM UTC-5, kiwinPA wrote:
>>
>>>
>>> Website says unavailable.
>>>
>>> On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk
>>> Motorcycle Lovers!  wrote:
>>>
 hope that you get the tapping done without any troubles. I had the same
 issue and was unsuccesful twice. I ordered a brand new one from
 https://en.impex-jp.com/ you just need to know the part number. I just
 did a quick search and the part needed is just the main petcock body part
 number 16951-MJ1-015
 
 Impex has it for about $65 plus shipping. I hope you don't have to order
 new. Once again good luck getting the job done with no leaks.

 --
 You received this message because you are subscribed to the Google
 Groups "Nighthawk Motorcycle Lovers!" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to nighthawk_love...@googlegroups.com.
 To post to this group, send email to nighthaw...@googlegroups.com.
 Visit this group at https://groups.google.com/group/nighthawk_lovers.
 For more options, visit https://groups.google.com/d/optout.

>>> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

['Pike' via Nighthawk Motorcycle Lovers!]

I recently did the tap screw repair and found that the leaking is caused by an 
o ring that fits in a groove around the on off reserve fuel selector.

> On Mar 27, 2018, at 9:29 AM, Graham Rogers  wrote:
> 
> Wait, wait! We both may have ordered the wrong one. Heres the one out of the 
> 700S petcock. No hole in the middle, Graham
> 
> 
> Sent from my iPad
> 
>> On Mar 27, 2018, at 8:39 AM, Quartermaster35  
>> wrote:
>> 
>> 
>> kiwin..
>> 
>> 
>> is the round gasket with the four holes the part that I need?   I can get 
>> that part for other Honda applications and would take the chance for 
>> $20   just wanted your input before I order it.
>> 
>> Thanks
>> 
>> 
>>> On Tuesday, March 27, 2018 at 7:26:54 AM UTC-5, Quartermaster35 wrote:
>>> Thank you for taking the time to look kiwin
>>> 
>>> Brian,   your info is helpful, the only alternative I found was 
>>> $165 on ebay (too much). if I cannot get the new washer, I will 
>>> probably order from the impex web site that you provided (knowing that you 
>>> had success in ordering it from them)
>>> 
>>> Thank you both for helping me with this issue.
>>> 
 On Tuesday, March 27, 2018 at 7:14:49 AM UTC-5, kiwinPA wrote:
 
 Website says unavailable.
 
> On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk Motorcycle 
> Lovers!  wrote:
> hope that you get the tapping done without any troubles. I had the same 
> issue and was unsuccesful twice. I ordered a brand new one from 
> https://en.impex-jp.com/ you just need to know the part number. I just 
> did a quick search and the part needed is just the main petcock body part 
> number 16951-MJ1-015 Impex has it for about $65 plus shipping. I hope you 
> don't have to order new. Once again good luck getting the job done with 
> no leaks.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to nighthawk_love...@googlegroups.com.
> To post to this group, send email to nighthaw...@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to nighthawk_lovers+unsubscr...@googlegroups.com.
>> To post to this group, send email to nighthawk_lovers@googlegroups.com.
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

Looks like the part I just ordered


On Mar 27, 2018, at 8:39 AM, Quartermaster35 wrote:

> 
> kiwin..
> 
> 
> is the round gasket with the four holes the part that I need?   I can get 
> that part for other Honda applications and would take the chance for 
> $20   just wanted your input before I order it.
> 
> Thanks
> 
> 
> On Tuesday, March 27, 2018 at 7:26:54 AM UTC-5, Quartermaster35 wrote:
> Thank you for taking the time to look kiwin
> 
> Brian,   your info is helpful, the only alternative I found was $165 
> on ebay (too much). if I cannot get the new washer, I will probably 
> order from the impex web site that you provided (knowing that you had success 
> in ordering it from them)
> 
> Thank you both for helping me with this issue.
> 
> On Tuesday, March 27, 2018 at 7:14:49 AM UTC-5, kiwinPA wrote:
> 
> Website says unavailable.
> 
> On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk Motorcycle 
> Lovers!  wrote:
> hope that you get the tapping done without any troubles. I had the same issue 
> and was unsuccesful twice. I ordered a brand new one from 
> https://en.impex-jp.com/ you just need to know the part number. I just did a 
> quick search and the part needed is just the main petcock body part number 
> 16951-MJ1-015 Impex has it for about $65 plus shipping. I hope you don't have 
> to order new. Once again good luck getting the job done with no leaks.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to nighthawk_love...@googlegroups.com.
> To post to this group, send email to nighthaw...@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
> 

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Quartermaster35]

kiwin..


is the round gasket with the four holes the part that I need?   I can get 
that part for other Honda applications and would take the chance for 
$20   just wanted your input before I order it.

Thanks


On Tuesday, March 27, 2018 at 7:26:54 AM UTC-5, Quartermaster35 wrote:

> Thank you for taking the time to look kiwin
>
> Brian,   your info is helpful, the only alternative I found was 
> $165 on ebay (too much). if I cannot get the new washer, I will 
> probably order from the impex web site that you provided (knowing that you 
> had success in ordering it from them)
>
> Thank you both for helping me with this issue.
>
> On Tuesday, March 27, 2018 at 7:14:49 AM UTC-5, kiwinPA wrote:
>
>>
>> Website says unavailable.
>>
>> On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk Motorcycle 
>> Lovers!  wrote:
>>
>>> hope that you get the tapping done without any troubles. I had the same 
>>> issue and was unsuccesful twice. I ordered a brand new one from 
>>> https://en.impex-jp.com/ you just need to know the part number. I just 
>>> did a quick search and the part needed is just the main petcock body part 
>>> number 16951-MJ1-015 
>>> 
>>>  
>>> Impex has it for about $65 plus shipping. I hope you don't have to order 
>>> new. Once again good luck getting the job done with no leaks.
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to nighthawk_love...@googlegroups.com.
>>> To post to this group, send email to nighthaw...@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Quartermaster35]

Thank you for taking the time to look kiwin

Brian,   your info is helpful, the only alternative I found was 
$165 on ebay (too much). if I cannot get the new washer, I will 
probably order from the impex web site that you provided (knowing that you 
had success in ordering it from them)

Thank you both for helping me with this issue.

On Tuesday, March 27, 2018 at 7:14:49 AM UTC-5, kiwinPA wrote:

>
> Website says unavailable.
>
> On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk Motorcycle 
> Lovers!  wrote:
>
>> hope that you get the tapping done without any troubles. I had the same 
>> issue and was unsuccesful twice. I ordered a brand new one from 
>> https://en.impex-jp.com/ you just need to know the part number. I just 
>> did a quick search and the part needed is just the main petcock body part 
>> number 16951-MJ1-015 
>> 
>>  
>> Impex has it for about $65 plus shipping. I hope you don't have to order 
>> new. Once again good luck getting the job done with no leaks.
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to nighthawk_love...@googlegroups.com .
>> To post to this group, send email to nighthaw...@googlegroups.com 
>> .
>> Visit this group at https://groups.google.com/group/nighthawk_lovers.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Re: [Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

[Graham Rogers]

Website says unavailable.

On Tue, Mar 27, 2018 at 4:28 AM 'brian lindsley' via Nighthawk Motorcycle
Lovers!  wrote:

> hope that you get the tapping done without any troubles. I had the same
> issue and was unsuccesful twice. I ordered a brand new one from
> https://en.impex-jp.com/ you just need to know the part number. I just
> did a quick search and the part needed is just the main petcock body part
> number 16951-MJ1-015
> 
> Impex has it for about $65 plus shipping. I hope you don't have to order
> new. Once again good luck getting the job done with no leaks.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

[Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

['brian lindsley' via Nighthawk Motorcycle Lovers!]

hope that you get the tapping done without any troubles. I had the same 
issue and was unsuccesful twice. I ordered a brand new one from 
https://en.impex-jp.com/ you just need to know the part number. I just did 
a quick search and the part needed is just the main petcock body part 
number 16951-MJ1-015 

 
Impex has it for about $65 plus shipping. I hope you don't have to order 
new. Once again good luck getting the job done with no leaks.

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

[Nighthawk Lovers] Re: Fuel Petcock Leak - CB700SC Nighthawk S - Need Advice!

['brian lindsley' via Nighthawk Motorcycle Lovers!]

I

I hope that you get the tapping done without any troubles. I had the same 
issue and was unsuccesful twice. I ordered a brand new one from 
https://en.impex-jp.com/ you just need to know the part number. I just did 
a quick search and the part needed is just the main petcock body part 
number 16951-MJ1-015 

 
Impex has it for about $65 plus shipping. As always photos of the work you 
are doing and your bike makes me happy. I hope you don't have to order new. 
Once again good luck getting the job done with no leaks.

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.