Hello all,
I am trying to implement WFQ for Wimax PMP network and I would like to
know if someone has any sample example file where they have
implemented WFQ for Wimax and wireless network.
I would appreciate if anyone could help me for that.
Thanks in advance, it would be great if nyone can hel
Hello dear all,
I am working on intrusion detection system for
wireless ad hoc network,,
my routing protocol is AODV+(not AODV)... like
wireles-cum-wireless when MANET connected to the
INternet
ok according to this introduction
I need to add some echo agent as a generator of attack
packet,
Hello dear all,
I am working on intrusion detection system for
wireless ad hoc network,,
my routing protocol is AODV+(not AODV)... like
wireles-cum-wireless when MANET connected to the
INternet
ok according to this introduction
I need to add some echo agent as a generator of attack
packet,
Hi Ghazale,
I am also working with simulation of audio and video flows. Well, I may be
wrong in my approach, but all I did was creating a simple CBR traffic
generator over UDP. I have also made some real tests for getting some
parameters for supplying NS2, such as MTU, packet size, and rate.
Of
Hi all
does
1)'-g' added to CCFLAG variable in the Makefile
and
2)'--enabled-debug' ./configure parameter
equivalent ?
I mean do I just use one of them to enable DGB or other debuggers?
Best regards
Ramzi Tka
Hello there,
I am not sure the setting of "rate_" in Exponential traffic
I wanna generate data traffic with rate of 16kps , and packetsize is 40Byts.
burst_time 450ms, idle_time 50ms,
In my calculation, 16kps = rate_ * burst_time / (burst_time + idle_time) ,
so I get rate_ is 17.778 k
Is it ri
Yes, with your configuration you will have an average error rate of 5% but
in a very particular way. During 0.95 seconds you will receive all the
packets correctly and then you will have errors in all packets for
0.05seconds, then again
0.95 seconds of error-free packets and so on...
I don't know
Hi,
I'd use a external script to avoid doing too much by hand. I don't know how
much nodes and movement changes you're talking about, whether it's feasable
by hand or not kind of depends on that.
1) Basically you need the initial position of each node (two-dimensional):
$node_(0) X_
$node_(
Hi all
Can I add MNS v2.0 on ns-allinone-2.29?
Please help me.
Thanks in advance.
Rafieenezhad