Hi, ns-users
Have anyone heard about the Alternate Path Routing
there is a paper on this subject, originated by D.
Zappala, Does anyone knowwhether this protocol has
been implemented in ns2? If the answer is yes,
where can I find the source code?
Tks for the help.
P.B.BHAVATHANKAR.
M.Tech (
Greetings all,
This is a question on MultiStateErrorModel.
I see that the model's corrupt(Packet* p) function makes a tcl call for each
packet. Unless I misunderstood chapter-3 of the manual, this is really supposed
to slow down the simulation.
Has anyone experienced slow performance wit
Greetings,
I just wanted to warn people who intend to use TwoStateErrorModel and its
derivatives. Note that the transitionState() function of this class upperbounds
the duration of state_1 with 120 seconds. This is done in errmodel.cc in ns
v2.30.
I do not know the reason behind this uppe
hello
can anubody tell me how to implement alternate path
routing in ns-2
bye
__
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/
Hi all,
When I run a ring-topology protocol script,I get an error listed below.
Would you please tell me how to deal with it? Thanks
I saw the response of a similar question, he commented "make sure it is fully
connected".
My topology is
n0 ---> n1 > n2 ---> n0
Isn't it fully connected
Hi friends,
I have to use VBR traffic instead of CBR.How to change
the CBR traffic to VBR traffic in NS2?
How to diffrentiate different applications in NS2 like
voice ,video and data ?
Please help
Thanks in advance,
Taraka
On 3/8/07, super.ismiti <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> I'm trying to install the ns2.30 simulator in my Linux (Ubuntu 6.10 with
> gcc4.1 and g++4.1).
> I've already read the messages in the list where is written that I must
> change the gcc4.1 and g++4.1 to gcc4.0 and g++4.0.
> I've alread
Check my page http://tagus.inesc-id.pt/~pestrela/ns2/ns2_haddr_tips.html
about my address conversion functions
Pedro Vale Estrela
Type of Addresses that a node can have in NS2 (hAddr, ID, iAddr, Handle)
In NS2, a node can be uniquely identified by several forms
the "handle" is the otcl
waht is the role of the following function in channel.cc,
"" WirelessChannel:: get_pdelay (Node* tnode, Node* rnode) "" it returns
propagation delay between two nodes ?. if this is truth, which is the
difference between this returned delay by this function and the delay which can
obtained by
Hi all,
I was with problems to install ns-2.30, so I tried the ns-allinone-2.29 and
I succeed.
But, now I have other problem... Ah, I'm starting with Linux and NS, ok!!!
Now I need to install the nam, so I downloaded nam-src-1.11.
I tried to install it, but a problem was showed during the "make"
hi
thanks for reply.
i use test_udp script and mannul to write program for umts euran. it runs fine.
but there is no communication between ue1 and base station. even i put the sink
at ue1. but the trace file show only communication between base-station, fixed
node and rnc. but no message sen
Will the problem was in a hierarchical network the addresses are represented
as doted string (i.e. 0.8.1) so you need to convert the address to int in
the script.
to convert the address use something like this:
set addressObj [[$ns get-AllocAddrBits ""] get-Address]
set ip [$addressObj str2addr
Hi,
I'm trying to install the ns2.30 simulator in my Linux (Ubuntu 6.10 with
gcc4.1 and g++4.1).
I've already read the messages in the list where is written that I must
change the gcc4.1 and g++4.1 to gcc4.0 and g++4.0.
I've already tried it but it didn't work!
The same problem is showed: final
Hi,
ns-2 physical layer modeling is notoriously weak.
A patch solving
some of the issues you mentioned
is avaialble at http://www.reti.polito.
it/fiore
bye,
Marco
>Messaggio originale
>Da: [EMAIL PROTECTED]
cmu.edu
>Data: 8-mar-2007 3.21 AM
>A:
>Ogg: [ns]
SINR and NS-2 802.11 simu
Hello Ahmad,
Ahmad Khayyat wrote:
> Try installing xorg-dev.
> It will pull down a lot of X development dependencies.
Thanks for the hint, that basically did the trick.
I didn't want to cluster my machine with tons of possibly unnecessary
dev-packages (xorg-dev is a meta-package), however, so
The manual has a section about using node-config to setup those
parameters. Search the manual for "node-config" -- hopefully that will
help.
-Scott
On 8 Mar 2007 06:19:16 -, shalini c. thilakan
<[EMAIL PROTECTED]> wrote:
>
> hi all,
> where can i find configuration files in NS-2 where all th
Dear all,
My question is actually a sanity-check of the energy consumption of IEEE
802.15.4 sensor nodes.
I have a very simple simulation with a handful of wireless nodes
employing IEEE 802.15.4 (ns2.29 code) and a wired sink.
I have assumed 2AA batteries as the energy source, translating into
On 3/8/07, boutoumi bachira <[EMAIL PROTECTED]> wrote:
>
> Hi,
> I am using ns2 to make some research of ad hoc multicast.
> I downloaded the ns wireless extension for multicast from the monarchproject
> site. I have exactly downloaded the file (ns-2.1b8-mcast.tar.gz).
> How would i integerate t
Try installing xorg-dev.
It will pull down a lot of X development dependencies.
On Wed, 7 Mar 2007 23:49:32 - (UTC)
"Timo Reimann" <[EMAIL PROTECTED]> wrote:
>
> Hello,
>
> I've been trying to install ns-allinone-2.30 on my system (Linux
> Ubuntu 6.10 with 2.6.17-11-38, Xorg 7.1.1) where t
Hi,
1.I am trying to understand March Greis tutorial(wireless3.tcl). When the
MN moves within the HA area, there is a lot of dropped packets. The only line
I modified is the setdest for MN. Why is this happening? (This is assuming
that the default ranges for MN,HA and FA are 250m.)
Hi,
I am using ns2 to make some research of ad hoc multicast.
I downloaded the ns wireless extension for multicast from the monarchproject
site. I have exactly downloaded the file (ns-2.1b8-mcast.tar.gz).
How would i integerate this in ns-allinone. I am working with
ns-allinone-2.29.1.
Is it po
Hi,
I am using ns2 to make some research of ad hoc multicast.
I downloaded the ns wireless extension for multicast from the monarchproject
site. I have exactly downloaded the file (ns-2.1b8-mcast.tar.gz).
How would i integerate this in ns-allinone. I am working with
ns-allinone-2.29.1.
Is it po
Hi,
I am using ns2 to make some research of ad hoc multicast.
I downloaded the ns wireless extension for multicast from the monarchproject
site. I have exactly downloaded the file (ns-2.1b8-mcast.tar.gz).
How would i integerate this in ns-allinone. I am working with
ns-allinone-2.29.1.
Is it po
Have you tried this code?
http://lifc.univ-fcomte.fr/~dedu/ns2/
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of zhang victor
> Sent: quarta-feira, 7 de Março de 2007 3:39
> To: ns-users@ISI.EDU
> Subject: [ns] help for implementation of the DCCP i
hi
i have some problem in euran programming. i tried the test script these run
fine. but i want to modify umts script. (in which current communication
between node1-rnc and acknowledgement send to bs which is at node1.) but there
is no communication to ue1 or ue2 which are connected by umts
Hi Markus,
Leitner, Markus schrieb:
I am currently working on a project dealing with simulation of mobile
nodes.
To describe relevant network topologies I am searching for a possibility
to define the receiving threshold individually per node (e.g. mobile
node A has a receiving threshold of X,
Hi all,
I am currently working on a project dealing with simulation of mobile
nodes.
To describe relevant network topologies I am searching for a possibility
to define the receiving threshold individually per node (e.g. mobile
node A has a receiving threshold of X, while all other nodes have a
http://mailman.isi.edu/pipermail/ns-users/2007-March/059031.html
After applying a patch to a source code, you need to recompile... Run
make and it will work.
For the detailed sequence of commands to run:
http://www.q2s.ntnu.no/~paquerea/ns.html
Laurent Paquereau
Q2S Centre of Excellence, NTNU
paolalonetti wrote:
> maybe it's not a problem of NS, but it's a problem of your version of
> Linux.
> Try it:
> - modify your installation including the packets X.
If you mean by that I should install the missing X headers: Of course, I
did that.
I'm not blaming NS for not finding dependent so
Hi all,
I have copied ns-2.30.patch in folder ns-2.30.
Then patch it...as in your website.
Then ./configure
Then ./validate
When i run >>ns mwnode-ex.tcl , i got errors:
invalid command name "Channel/Wireless"
while executing
"Channel/Wireless create _o14 "
invoked from within
"catch
hi all,
I am implementing a power aware routing protocol for ad hoc networks in
NS-2.The present energy model in NS-2 is not power aware..Does anyone know how
to implement such a protocol in NS-2,and where to find the battery parameters
for each node.
Dear ns-users,
I am trying to implement a new protocol for NS-2 following the howto
"Implementing a New Manet Unicast Routing Protocol in NS2", which is available
at http://masimum.dif.um.es/nsrt-howto/html/.
After adding some missing header files, I could recompile NS with the new
protocol,
32 matches
Mail list logo