[ns] Instant Delay
Hello All, Can anybody help me with the code to measure instand delay? I use as below: awk -f instantdelay_v2.awk tic=1.0 src=14 dst=6 flow=2 pkt=160 diff_expo.res but didn't get any output but for throughput it works well. Also I need help about measuring drop rate if possible. Thanks for your understanding. Larry --- On Sat, 2/19/11, mahsa moazeni rahaa...@yahoo.com wrote: From: mahsa moazeni rahaa...@yahoo.com Subject: [ns] Segmentation Fault To: ns-users@ISI.EDU Date: Saturday, February 19, 2011, 8:27 AM I have installed Video Traffic generator (TES) on my ubuntu operating system with NS2-2.31 ,I have downloaded it from Contributed codes in NS2 web site . When I compile a simple tcl file which use video traffic generator ,I receive Segmentation fault (core dumped) error please help me
[ns] ns: [Simulator instance] get-link-head 14 8
Can anyone brief me on how you can solve a problem with this error code:Simulation is running ... please wait ... ns: [Simulator instance] get-link-head 14 8: can't read link_(14:8): no such element in array while executing $link_($n1:$n2) head (procedure _o3 line 3) ...(Simulator get-link-head line 3) invoked from within [Simulator instance] get-link-head 14 8 Thanks for your kind understanding Brown --- On Fri, 1/21/11, hend baklouti hend.baklo...@gmail.com wrote: From: hend baklouti hend.baklo...@gmail.com Subject: [ns] ns2-28 installation problems To: ns-users@ISI.EDU Date: Friday, January 21, 2011, 5:33 AM Hi everybody, i have installed ns-2.32 on fedora core 8 but now i have to replace it by ns-2.28 .i have removed ns-2.32 but while installing ns-2.28 i have this kind of msg When configured, ns found the right version of tclsh in /home/ns-allinone-2.32/bin/tclsh8.4 but it doesn't seem to be there anymore, so ns will fall back on running the first tclsh in your path. The wrong version of tclsh may break the test suites. Reconfigure and rebuild ns if this is a problem. ns: [code omitted because of length] : invalid command name SRMEXT off_srm_ext_ while executing { SRMEXT off_srm_ext_} i'm a beginner and i don't know what to do . Help me please. Hend
[ns] To connect Expo traffic or udp via Diffserv
I have done alot a work in ns and I am just at the final stage of my my work to get the relevant result I am looking for. I have actually got a good result for rtp so far but when it come to udp the simulation runs but the output file seems to to be going through the diffserv domain though the simulation... actually runs: I have connected my udp following the examples i got from the ns example. I just want to find out if there is a special way of connecting expo traffic of udp through Diffserv domian or if I have to make some modification in this case. Waiting for your kind response and thanks for your understanding.Regards Larry --- On Thu, 1/13/11, manoj1987 micman.ma...@hotmail.com wrote: From: manoj1987 micman.ma...@hotmail.com Subject: Re: [ns] I dont understand a statement in ./install To: ns-users@ISI.EDU Date: Thursday, January 13, 2011, 1:56 PM Badieh Traboulsi wrote: I use Ubuntu 8.10 to run the NS, and when I do the command: ./install What version of NS are you using? Badieh Traboulsi wrote: at some point im asked the following: Please enter your java binary path []: Does this mean I need to enter the path to install Java, or it is asking for the java executable ? or is it something else? I suggest you read this article[1] on installing NS2.34 in Ubuntu 10.10/Fedora 12. -- [1] http://wp.me/piGUb-yc - --- ManojKumar.A --- Blog: http://getch.wordpress,com Mailing list guidelines: http://goo.gl/xC874 -- View this message in context: http://old.nabble.com/I-dont-understand-a-statement-in-.-install-tp30515685p30665255.html Sent from the ns-users mailing list archive at Nabble.com.
Re: [ns] plotting throughput in xgraph
Dear Sir, Can I get a code or script that works with udp, diffserv and sip. I am working on seamless mobility of heterogeneous network. Your kind response will be highly appreciated. Tobby --- On Thu, 1/6/11, prabhakar_dorge2007 prabhakar_dorge2...@rediffmail.com wrote: From: prabhakar_dorge2007 prabhakar_dorge2...@rediffmail.com Subject: Re: [ns] plotting throughput in xgraph To: ns-users@ISI.EDU Date: Thursday, January 6, 2011, 1:35 AM Hi, Please tell me how to draw the graph of throughput by Xgraph. Give me source code also. Thanks in advance. -- View this message in context: http://old.nabble.com/plotting-throughput-in-xgraph-tp30594990p30602877.html Sent from the ns-users mailing list archive at Nabble.com.
[ns] Your kind response
Hello, Can anyone forward to me a code or script that works with udp, diffserv and sip. I am working on seamless mobility of heterogeneous network. Your kind response will be highly appreciated. Tobby --- On Fri, 1/7/11, jasmine Nforh Paula mine0...@yahoo.com wrote: From: jasmine Nforh Paula mine0...@yahoo.com Subject: Re: [ns] plotting throughput in xgraph To: ns-users@ISI.EDU Date: Friday, January 7, 2011, 6:36 AM Dear Sir, Can I get a code or script that works with udp, diffserv and sip. I am working on seamless mobility of heterogeneous network. Your kind response will be highly appreciated. Tobby --- On Thu, 1/6/11, prabhakar_dorge2007 prabhakar_dorge2...@rediffmail.com wrote: From: prabhakar_dorge2007 prabhakar_dorge2...@rediffmail.com Subject: Re: [ns] plotting throughput in xgraph To: ns-users@ISI.EDU Date: Thursday, January 6, 2011, 1:35 AM Hi, Please tell me how to draw the graph of throughput by Xgraph. Give me source code also. Thanks in advance. -- View this message in context: http://old.nabble.com/plotting-throughput-in-xgraph-tp30594990p30602877.html Sent from the ns-users mailing list archive at Nabble.com.
[ns] Code for udp and Diffservice.
Hi Everyone I shall highly appreciate if anyone can send a script that connect udp and differential service. I am working on seamless mobility using using SIP and NIST externation. Your kind response will be highly appreciated. Larry
[ns] Your Kind Response
Hi Teerawat, I will highly appreciate if you can send a script that connect udp and differential service. I am working on seamless mobility using using SIP and NIST externation. set N 2 ;#call/sec #set simtime 3600 set call_time_ 3;#sec set sip_rate [expr (577 * 8 * $N)] set interarrivo [expr (1.0 / $N)] set sip_packet_size 577 set voice_packet_size 1064 set voice_burst_time 1.0 set voice_idle_time 1.3 set voice_rate 64000 set tidle 1 set ttotal 2.3 set tmedio [expr (${tidle} / ${ttotal})] set from 1 set to 2 #agent test for voice sources set udp_test [new Agent/UDP] $udp_test set class_ 2 $ns attach-agent $host0 $udp_test #$ns trace-queue $n_test_1 $n_voice_(1) $f #agentTestSink set udp_test_sink [new Agent/Null] $ns attach-agent $iface0 $udp_test_sink $ns trace-queue $ar $bstation802_16 $f #Multiface node is receiver $multiFaceNode attach-agent $udp_test_sink $iface0 $handover add-flow $udp_test_sink $udp_test $iface0 1 ;#2000. set udp0 [new Agent/UDP] $ns attach-agent $host1 $udp0 set cbr0 [new Application/Traffic/CBR] $cbr0 attach-agent $udp0 $cbr0 set packet_size_ 1064 $udp0 set packetSize_ 1500 $cbr0 set rate_ $rate0 #Create the Null agent to sink traffic set null0 [new Agent/Null] $multiFaceNode attach-agent $null0 $iface0 $handover add-flow $null0 $udp0 $iface0 1 ;#2000. Your kind response will be highly appreciated. Larry
Re: [ns] [Deadline extension] NC-Pro 2011 (Networking 2011 workshop)
Hello All, I have the following error using diffservice: ERROR: No Policy Table entry found for Source 4194305-Destination 2. Policy Table(2): Flow (13 to 9): trTCM policer, initial code point 10, CIR 200.0 bps, CBS 2.0 bytes, PIR 200.0 bps, PBS 3.0 bytes. Flow (13 to 10): trTCM policer, initial code point 11, CIR 1000.0 bps, CBS 200.0 bytes, PIR 1000.0 bps, PBS 300.0 bytes. The policy object doesn't exist, ERROR!!! How can I add the ( source 4194305) or value of the source in the so I can get the policy table (2)) Waiting for your kind response Lawrence --- On Thu, 12/16/10, Carlos T. Calafate calaf...@disca.upv.es wrote: From: Carlos T. Calafate calaf...@disca.upv.es Subject: [ns] [Deadline extension] NC-Pro 2011 (Networking 2011 workshop) To: ns-users@ISI.EDU Date: Thursday, December 16, 2010, 9:09 AM -- Network Coding Applications and Protocols Workshop (NC-Pro 2011), May 13, 2011, Valencia, Spain (in conjunction with IFIP Networking 2011) Web page: http://www.networking2011.org/workshops/NC-Pro.html CALL FOR PAPERS: -- Aim and Scope: The Network Coding Applications and Protocols Workshop (NC-Pro 2011) is the 1st workshop on network coding collocated with the Networking conference and sponsored by the IFIP Technical Committee on Communication Systems (TC6). The main objectives of NC-Pro 2011 are to bring together members of the network coding community from both academia and industry, and to discuss recent advances in applications and protocols based on network coding. The ultimate goal is to highlight key research and industry challenges, identify current trends and develop visions for the future. -- Workshop topics: - Network Code Constructions and Algorithms - Security and Error Correction for Network Coding - Network Coding for Internet Communications - Network Coding for Distributed storage - Network Coding at the MAC Layer - Network Coding and Routing - Multi-path Network Coding - Wireless Network Coding Protocols - Implementation Aspects of Network Coding - Robustness, Energy, or Delay Aspects of Network Coding - Resource Optimization for Network Coding - Network Coding in VLSI -- - Important Dates: Abstract due: December 23, 2010 Full Paper Submission: January 3, 2010 Acceptance Notification: February 10, 2011 Camera ready due: March 1, 2011 -- - Guidelines for Submission: Authors are invited to submit full papers via the EDAS Conference Management System. Only original papers describing previously unpublished, not currently under review by another conference or journal, addressing state-of-the-art research and development must be submitted. All papers will be peer reviewed and accepted papers will appear in the workshop proceedings, LNCS published by Springer-Verlag, in the Lecture Notes in Computer Science (LNCS) series. Papers must be written in English and should follow the instructions in the Springer template file available in both LaTeX and Microsoft Word format. The first page should include paper title, an abstract of about 150 words,3-5 keywords indicating the paper topic area and symposium, name and affiliation of author(s) as well as the corresponding author's e-mail and postal addresses. Maximum paper length is 8 printed pages (10-point font). -- Organizing Committee -Workshop Chairs João Barros, Universidade do Porto, Portugal e-mail: jbar...@fe.up.pt Daniel E. Lucani, Universidade do Porto, Portugal e-mail: dluc...@fe.up.pt -Technical Program Committee: Alex Dimakis, University of Southern California, USA Frank H. P. Fitzek, University of Aalborg, Denmark Christina Fragouli, EPFL, Switzerland Gerhard Kramer, University of Southern California, USA Desmond Lun, Rutgers University, USA Muriel Médard, Massachusetts Institute of Technology, USA Marie-Jose Montpetit, Massachusetts Institute of Technology, USA Danilo Silva, Federal University of Santa Catarina, Brazil Alberto Toledo, Telefónica I+D, Spain Joerg Widmer, IMDEA Networks, Spain -- ** Carlos Calafate, PhD IFIP Networking 2011 Publicity Chair Computer Networks Group (GRC) Technical University of Valencia, Spain Voice: +34 96 387 7007 ext. 75727 Fax: +34 96 387 7579 E-mail: calaf...@disca.upv.es **
[ns] Your Response
Hello All, I have the following error using diffservice: ERROR: No Policy Table entry found for Source 4194305-Destination 2. Policy Table(2): Flow (13 to 9): trTCM policer, initial code point 10, CIR 200.0 bps, CBS 2.0 bytes, PIR 200.0 bps, PBS 3.0 bytes. Flow (13 to 10): trTCM policer, initial code point 11, CIR 1000.0 bps, CBS 200.0 bytes, PIR 1000.0 bps, PBS 300.0 bytes. The policy object doesn't exist, ERROR!!! How can I add the ( source 4194305) or value of the source in the so I can get the policy table (2)) Waiting for your kind response Lawrence From: jasmine Nforh Paula mine0...@yahoo.com To: ns-users@ISI.EDU Sent: Thu, December 16, 2010 7:39:08 PM Subject: Re: [ns] [Deadline extension] NC-Pro 2011 (Networking 2011 workshop) Hello All, I have the following error using diffservice: ERROR: No Policy Table entry found for Source 4194305-Destination 2. Policy Table(2): Flow (13 to 9): trTCM policer, initial code point 10, CIR 200.0 bps, CBS 2.0 bytes, PIR 200.0 bps, PBS 3.0 bytes. Flow (13 to 10): trTCM policer, initial code point 11, CIR 1000.0 bps, CBS 200.0 bytes, PIR 1000.0 bps, PBS 300.0 bytes. The policy object doesn't exist, ERROR!!! How can I add the ( source 4194305) or value of the source in the so I can get the policy table (2)) Waiting for your kind response Lawrence --- On Thu, 12/16/10, Carlos T. Calafate calaf...@disca.upv.es wrote: From: Carlos T. Calafate calaf...@disca.upv.es Subject: [ns] [Deadline extension] NC-Pro 2011 (Networking 2011 workshop) To: ns-users@ISI.EDU Date: Thursday, December 16, 2010, 9:09 AM -- Network Coding Applications and Protocols Workshop (NC-Pro 2011), May 13, 2011, Valencia, Spain (in conjunction with IFIP Networking 2011) Web page: http://www.networking2011.org/workshops/NC-Pro.html CALL FOR PAPERS: -- Aim and Scope: The Network Coding Applications and Protocols Workshop (NC-Pro 2011) is the 1st workshop on network coding collocated with the Networking conference and sponsored by the IFIP Technical Committee on Communication Systems (TC6). The main objectives of NC-Pro 2011 are to bring together members of the network coding community from both academia and industry, and to discuss recent advances in applications and protocols based on network coding. The ultimate goal is to highlight key research and industry challenges, identify current trends and develop visions for the future. -- Workshop topics: - Network Code Constructions and Algorithms - Security and Error Correction for Network Coding - Network Coding for Internet Communications - Network Coding for Distributed storage - Network Coding at the MAC Layer - Network Coding and Routing - Multi-path Network Coding - Wireless Network Coding Protocols - Implementation Aspects of Network Coding - Robustness, Energy, or Delay Aspects of Network Coding - Resource Optimization for Network Coding - Network Coding in VLSI -- - Important Dates: Abstract due: December 23, 2010 Full Paper Submission: January 3, 2010 Acceptance Notification: February 10, 2011 Camera ready due: March 1, 2011 -- - Guidelines for Submission: Authors are invited to submit full papers via the EDAS Conference Management System. Only original papers describing previously unpublished, not currently under review by another conference or journal, addressing state-of-the-art research and development must be submitted. All papers will be peer reviewed and accepted papers will appear in the workshop proceedings, LNCS published by Springer-Verlag, in the Lecture Notes in Computer Science (LNCS) series. Papers must be written in English and should follow the instructions in the Springer template file available in both LaTeX and Microsoft Word format. The first page should include paper title, an abstract of about 150 words,3-5 keywords indicating the paper topic area and symposium, name and affiliation of author(s) as well as the corresponding author's e-mail and postal addresses. Maximum paper length is 8 printed pages (10-point font). -- Organizing Committee -Workshop Chairs João Barros, Universidade do Porto, Portugal e-mail: jbar...@fe.up.pt Daniel E. Lucani, Universidade do Porto, Portugal e-mail: dluc...@fe.up.pt -Technical Program Committee: Alex Dimakis, University of Southern California, USA Frank H. P. Fitzek, University of Aalborg, Denmark Christina Fragouli, EPFL, Switzerland Gerhard Kramer, University
Re: [ns] Re : Scheduler: Event UID not valid!
Hello Hadi, Thanks I solve the problem but I got this other problem. Not very good in program, I will appreciate a code that I can add in the tcl/lib/ns-lib.tcl script that has the Nsobject in this slot or is because the node address of my proxies are wrong or do I have tonnect both proxies out of the differential service domain? Will kind response will be highly appreciated. Below is my problem: --- Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) --- _o151: no target for slot 1 _o151 type: Classifier/Addr content dump: classifier _o151 0 offset 0 shift 2047 mask 1 slots slot 0: _o530 (Classifier/Port) -- Finished standard no-slot{} default handler -- Regards Larry tobby --- On Tue, 12/14/10, El hadi Cherkaoui e_cherka...@yahoo.fr wrote: From: El hadi Cherkaoui e_cherka...@yahoo.fr Subject: Re : Scheduler: Event UID not valid! To: jasmine Nforh Paula mine0...@yahoo.com Date: Tuesday, December 14, 2010, 8:04 AM Dear, You should debug this error in the scheduler file of wimax80216 if you are using the package mobility of nist ! best regards --- En date de : Mar 14.12.10, jasmine Nforh Paula mine0...@yahoo.com a écrit : De: jasmine Nforh Paula mine0...@yahoo.com Objet: Scheduler: Event UID not valid! À: El hadi Cherkaoui e_cherka...@yahoo.fr Date: Mardi 14 décembre 2010, 12h42 Dear Friends I am having problem with Scheduler: Event UID not valid! can anybody help please. At 0.080147 in 9.0.0 MIH Agent received LINK DETECTED trigger. At 0.080147 in 9.0.0 Interface Manager received MIH event At 0.080147 in 9.0.0 Handover1 link detected type 27, MacAddr=13, PoA=10 The new interface is better...connect I launch the connection on the link Scheduler: Event UID not valid! Regards Lawrence --- On Mon, 12/13/10, El hadi Cherkaoui e_cherka...@yahoo.fr wrote: From: El hadi Cherkaoui e_cherka...@yahoo.fr Subject: [ns] Fw : Re: what does it means ??? To: NS user ns-users@ISI.EDU Date: Monday, December 13, 2010, 5:39 AM --- En date de : Lun 13.12.10, El hadi Cherkaoui e_cherka...@yahoo.fr a écrit : De: El hadi Cherkaoui e_cherka...@yahoo.fr Objet: Re: [ns] what does it means ??? À: Teerawat Issariyakul teera...@ece.ubc.ca Date: Lundi 13 décembre 2010, 10h15 Thank you for your reply, Acctually I am traying to debug this error but i don't know why it doesn't occur every time : I am working in a multiface node which contains wifi, umts and wimax nodes. When the wifi is not detected i have no problem, but when the node is close to the BS it generates this error. Can you help me ? Regards El Hadi --- En date de : Lun 13.12.10, Teerawat Issariyakul teera...@ece.ubc.ca a écrit : De: Teerawat Issariyakul teera...@ece.ubc.ca Objet: Re: [ns] what does it means ??? À: e_cherka...@yahoo.fr, ns-users@ISI.EDU Date: Lundi 13 décembre 2010, 6h16 Hi, The no-slot error occurs since you did not configure the classifier properly. In particular, you ask NS2 to send a packet to a non-existing object. For more information, please read the following post: http://www.ns2ultimate.com/post/520626807/classifier-no-slot-error Best Wishes, Teerawat Issariyakul http://www.ns2ultimate.com/ http://www.facebook.com/pages/Teerawat-Issariyakul/358240861417 http://twitter.com/T_Bear http://www.t-issariyakul.blogspot.com http://www.ece.ubc.ca/~teerawat On 12/12/2010, El hadi Cherkaoui e_cherka...@yahoo.fr wrote: Dear all , Please ca n someone explain me this error in NS2 -- Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) --- _o270: no target for slot 3 _o270 type: Classifier/Addr content dump: classifier _o270 0 offset 22 shift 1023 mask 1 slots slot 5: _o271 (Classifier/Addr) -- Finished standard no-slot{} default handler -- I can't find the object _o270 and _o271 so i can't understand where is the fault ??? I noted that I receive this error only when i have more then 2 mobile nodes. Best regards El hadi
[ns] Thanks for your understanding Once more
Thanks I solve the problem but I got this other problem. Not very good in program, I will appreciate a code that I can add in the tcl/lib/ns-lib.tcl script that has the Nsobject in this slot or is because the node address of my proxies are wrong or do I have tonnect both proxies out of the differential service domain? Will kind response will be highly appreciated. Below is my problem: --- Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) --- _o151: no target for slot 1 _o151 type: Classifier/Addr content dump: classifier _o151 0 offset 0 shift 2047 mask 1 slots slot 0: _o530 (Classifier/Port) -- Finished standard no-slot{} default handler -- my simulation runs as follows: nf...@nlab11:~/Desktop$ /home/nforh/Desktop/ns-allinone-2.29/bin/ns newdiffserv102.tcl rnc: tcl=_o16; id=0; addr=0.0.0 bsUMTS: tcl=_o30; id=1; addr=0.0.1 iface0(UMTS): tcl=_o72; id=2; addr=0.0.2 e1: tcl=_o96; id=3; addr=2.1.0 core: tcl=_o104; id=4; addr=2.1.2 e2: tcl=_o112; id=5; addr=2.1.3 ar: tcl=_o120; id=6; addr=2.1.4 host0: tcl=_o128; id=7; addr=1.0.1 host1: tcl=_o136; id=8; addr=1.0.2 proxy_1 _o144 proxy_2 _o152 multiFaceNode: tcl=_o163; id=11; addr=5.0.0 num_nodes is set 17 INITIALIZE THE LIST xListHead bstation802: tcl=_o342; id=12; addr=3.0.0 bss_id for bstation 1=4 _o351 channelID = 241200.00 _o379 channelID = 241200.00 iface1: tcl=_o370; id=13; addr=3.0.1 INITIALIZE THE LIST xListHead bstation802_16: tcl=_o418; id=14; addr=4.0.0 iface3: tcl=_o448; id=15; addr=4.0.1 At 0.00 in 0.0.0 ND module added RA target 0.0.2 At 0.00 in 3.0.0 MIH is adding mac 4 At 0.00 in 4.0.0 MIH is adding mac 6 At 0.00 in 5.0.0 Interface Manager : Flow added warning: no class variable Session/RTP::debug_ see tcl-object.tcl in tclcl for info about this warning. At 0.00 in 5.0.0 Interface Manager : Flow added At 0.00 in 5.0.0 Interface Manager : Flow added At 0.00 in 5.0.0 Interface Manager : Flow added tcp stream made from 2.1.0 and 0.0.2 At 0.00 in 5.0.0 MIH is adding mac 0 At 0.00 in 5.0.0 MIH is adding mac 5 At 0.00 in 5.0.0 MIH is adding mac 7 Policy Table(2): Flow (11 to 7): trTCM policer, initial code point 10, CIR 200.0 bps, CBS 2.0 bytes, PIR 200.0 bps, PBS 3.0 bytes. Flow (11 to 8): trTCM policer, initial code point 11, CIR 1000.0 bps, CBS 200.0 bytes, PIR 1000.0 bps, PBS 300.0 bytes. Policer Table: trTCM policer code point 10 is policed to yellow code point 11 and red code point 12. Calling MIH_Get_Status At 0.001000 in 5.0.0, MIH receives get_status for local MIH MIH_Get_Status results for 3 interface(s): Link ID: linkType=23, macMobileTerminal=0, macPoA=-1 Capabilities are: commands:3, events:3 MIH User subscribing for events 1fb on Mac 0 Subscription status: requested=1fb, result=3 Link ID: linkType=19, macMobileTerminal=5, macPoA=-1 Capabilities are: commands:f, events:1bf MIH User subscribing for events 1fb on Mac 5 Subscription status: requested=1fb, result=1bb Link ID: linkType=27, macMobileTerminal=7, macPoA=-1 Capabilities are: commands:f, events:1bf MIH User subscribing for events 1fb on Mac 7 Subscription status: requested=1fb, result=1bb channel.cc:sendUp - Calc highestAntennaZ_ and distCST_ highestAntennaZ_ = 1.5, distCST_ = 513.3 SORTING LISTS ...DONE! SORTING LISTS ...DONE! At 1.00 in 5.0.0 MIH Agent received LINK UP trigger. At 1.00 in 5.0.0 Interface Manager received MIH event At 1.00 in 5.0.0 Handover1 received link up type 23, MacAddr=0, MacPoA=-1 Case2: sending RS WARNING: At 1.00 MIPv6 Agent in 5.0.0 does not have ND to send RS --- Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) --- _o151: no target for slot 1 _o151 type: Classifier/Addr content dump: classifier _o151 0 offset 0 shift 2047 mask 1 slots slot 0: _o530 (Classifier/Port) -- Finished standard no-slot{} default handler -- Regards Larry tobby --- On Tue, 12/14/10, El hadi Cherkaoui e_cherka...@yahoo.fr wrote: From: El hadi Cherkaoui e_cherka...@yahoo.fr Subject: Re : Scheduler: Event UID not valid! To: jasmine Nforh Paula mine0...@yahoo.com Date: Tuesday, December 14, 2010, 8:04 AM Dear, You should debug this error in the scheduler file of wimax80216 if you are using the package mobility of nist ! best regards --- En date de : Mar 14.12.10, jasmine Nforh Paula mine0...@yahoo.com a écrit : De: jasmine Nforh Paula mine0...@yahoo.com Objet: Scheduler: Event UID not valid! À: El hadi Cherkaoui e_cherka...@yahoo.fr Date: Mardi 14 décembre 2010, 12h42 Dear Friends I am having problem with Scheduler: Event UID not valid! can anybody help please. At 0.080147 in 9.0.0 MIH Agent received LINK DETECTED trigger. At 0.080147 in 9.0.0 Interface Manager received MIH event At 0.080147 in 9.0.0 Handover1 link detected type 27, MacAddr=13, PoA=10 The new interface is better
[ns] Your Kind Response Will be Highly Appreciated
Thanks I solve the problem but I got this other problem. Not very good in program, I will appreciate a code that I can add in the tcl/lib/ns-lib.tcl script that has the Nsobject in this slot or is because the node address of my proxies are wrong or do I have tonnect both proxies out of the differential service domain? Will kind response will be highly appreciated. Below is my problem: --- Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) --- _o151: no target for slot 1 _o151 type: Classifier/Addr content dump: classifier _o151 0 offset 0 shift 2047 mask 1 slots slot 0: _o530 (Classifier/Port) -- Finished standard no-slot{} default handler -- my simulation runs as follows: nf...@nlab11:~/Desktop$ /home/nforh/Desktop/ns-allinone-2.29/bin/ns newdiffserv102.tcl rnc: tcl=_o16; id=0; addr=0.0.0 bsUMTS: tcl=_o30; id=1; addr=0.0.1 iface0(UMTS): tcl=_o72; id=2; addr=0.0.2 e1: tcl=_o96; id=3; addr=2.1.0 core: tcl=_o104; id=4; addr=2.1.2 e2: tcl=_o112; id=5; addr=2.1.3 ar: tcl=_o120; id=6; addr=2.1.4 host0: tcl=_o128; id=7; addr=1.0.1 host1: tcl=_o136; id=8; addr=1.0.2 proxy_1 _o144 proxy_2 _o152 multiFaceNode: tcl=_o163; id=11; addr=5.0.0 num_nodes is set 17 INITIALIZE THE LIST xListHead bstation802: tcl=_o342; id=12; addr=3.0.0 bss_id for bstation 1=4 _o351 channelID = 241200.00 _o379 channelID = 241200.00 iface1: tcl=_o370; id=13; addr=3.0.1 INITIALIZE THE LIST xListHead bstation802_16: tcl=_o418; id=14; addr=4.0.0 iface3: tcl=_o448; id=15; addr=4.0.1 At 0.00 in 0.0.0 ND module added RA target 0.0.2 At 0.00 in 3.0.0 MIH is adding mac 4 At 0.00 in 4.0.0 MIH is adding mac 6 At 0.00 in 5.0.0 Interface Manager : Flow added warning: no class variable Session/RTP::debug_ see tcl-object.tcl in tclcl for info about this warning. At 0.00 in 5.0.0 Interface Manager : Flow added At 0.00 in 5.0.0 Interface Manager : Flow added At 0.00 in 5.0.0 Interface Manager : Flow added tcp stream made from 2.1.0 and 0.0.2 At 0.00 in 5.0.0 MIH is adding mac 0 At 0.00 in 5.0.0 MIH is adding mac 5 At 0.00 in 5.0.0 MIH is adding mac 7 Policy Table(2): Flow (11 to 7): trTCM policer, initial code point 10, CIR 200.0 bps, CBS 2.0 bytes, PIR 200.0 bps, PBS 3.0 bytes. Flow (11 to 8): trTCM policer, initial code point 11, CIR 1000.0 bps, CBS 200.0 bytes, PIR 1000.0 bps, PBS 300.0 bytes. Policer Table: trTCM policer code point 10 is policed to yellow code point 11 and red code point 12. Calling MIH_Get_Status At 0.001000 in 5.0.0, MIH receives get_status for local MIH MIH_Get_Status results for 3 interface(s): Link ID: linkType=23, macMobileTerminal=0, macPoA=-1 Capabilities are: commands:3, events:3 MIH User subscribing for events 1fb on Mac 0 Subscription status: requested=1fb, result=3 Link ID: linkType=19, macMobileTerminal=5, macPoA=-1 Capabilities are: commands:f, events:1bf MIH User subscribing for events 1fb on Mac 5 Subscription status: requested=1fb, result=1bb Link ID: linkType=27, macMobileTerminal=7, macPoA=-1 Capabilities are: commands:f, events:1bf MIH User subscribing for events 1fb on Mac 7 Subscription status: requested=1fb, result=1bb channel.cc:sendUp - Calc highestAntennaZ_ and distCST_ highestAntennaZ_ = 1.5, distCST_ = 513.3 SORTING LISTS ...DONE! SORTING LISTS ...DONE! At 1.00 in 5.0.0 MIH Agent received LINK UP trigger. At 1.00 in 5.0.0 Interface Manager received MIH event At 1.00 in 5.0.0 Handover1 received link up type 23, MacAddr=0, MacPoA=-1 Case2: sending RS WARNING: At 1.00 MIPv6 Agent in 5.0.0 does not have ND to send RS --- Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) --- _o151: no target for slot 1 _o151 type: Classifier/Addr content dump: classifier _o151 0 offset 0 shift 2047 mask 1 slots slot 0: _o530 (Classifier/Port) -- Finished standard no-slot{} default handler -- Regards Larry tobby --- On Mon, 12/13/10, Elham Noori elha...@gmail.com wrote: From: Elham Noori elha...@gmail.com Subject: [ns] Energy and delay! To: ns-users@ISI.EDU Date: Monday, December 13, 2010, 4:15 PM Hi ns users, I want to calculate the energy and delay of a scenario, I don't know what should I add to my tcl and how to show it in xgraph! Can anybody help me on this?? Thanks in advance!! -- Elham Noori
Re: [ns] Your kind response
Dear ns users, I am running a simulation on seamless handover in ns2 and I have implemted differential service (trtcm policy) my two proxy are connected out of the differential service domain. I face the following error and will highly appreciate a kind response from any good Samaritan that might be willing to help. My topology contain 7 domains and one MultiFaceNode with the various technology: UMTs, WiFi and WiMax. Below is the error I got: ERROR: No Policy Table entry found for Source 4194305-Destination 2. Policy Table(2): Flow (12 to 8): trTCM policer, initial code point 10, CIR 200.0 bps, CBS 2.0 bytes, PIR 200.0 bps, PBS 3.0 bytes. Flow (12 to 9): trTCM policer, initial code point 11, CIR 1000.0 bps, CBS 200.0 bytes, PIR 1000.0 bps, PBS 300.0 bytes. The policy object doesn't exist, ERROR!!! Thanks for your kind understanding Lawrence --- On Mon, 12/13/10, Hoda Hassan mhel...@aucegypt.edu wrote: From: Hoda Hassan mhel...@aucegypt.edu Subject: Re: [ns] Your kind response To: jasmine Nforh Paula mine0...@yahoo.com Date: Monday, December 13, 2010, 12:18 PM Check all pointers, function calls etc This error is due to using a null pointer On Dec 11, 2010, at 2:15 AM, jasmine Nforh Paula wrote: Dear All, Your kind response to this problem will be highly appreciated. I have invested a lot of time, but I can not found the solution. Does anyone know the solution? or any idea may be. In my script I tried to run differential service with ns2.29. I am running out of time cos I suppose to hand my report by the end of month. I am running udp traffic. I have tried all the necessary configuration but can find the solution to differential service. The script runs well without differential service but when I implement differential service I get the following error: start_sip Policy Table(2): Flow (13 to 7): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 200.0 bps, PBS 3000.0 bytes. Flow (14 to 8): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 100.0 bps, PBS 3000.0 bytes. Policer Table: trTCM policer code point 10 is policed to yellow code point 11 and red code point 12. Simulation is running ... please wait ... Segmentation fault Your kind response will be highly appreciated Sincerely Lawrence --- On Thu, 12/9/10, Carlos T. Calafate calaf...@disca.upv.es wrote: From: Carlos T. Calafate calaf...@disca.upv.es Subject: [ns] [CFP] SUNSET 2011 (Networking 2011 workshop) To: ns-users@ISI.EDU Date: Thursday, December 9, 2010, 4:02 AM -- Workshop on Sustainable Networking (SUNSET 2011), May 13, 2011, Valencia, Spain (in conjunction with IFIP Networking 2011) Web page: http://www.networking2011.org/workshops/SUNSET.html CALL FOR PAPERS: -- Aim and Scope: The Workshop on Sustainable Networking (SUNSET 2011) is the 1st workshop on sustainable, green networking collocated with the Networking conference and sponsored by the IFIP Technical Committee on Communication Systems (TC6). The main objective of SUNSET 2011 is to bring together experts in the area of sustainable networking from both academia and industry. The workshop addresses issues with a high potential of energy savings in wireless and wired access for local and core networks. -- Workshop topics: - Energy-efficient broadband access networks - Sustainable wireless communication - Energy-efficient network management - Energy-efficient data center communication - Energy-efficient network components (routers, switches, etc.) - Network virtualization for reducing power consumption - Monitoring concepts for energy-efficient network management - Energy-efficient end-to-end networking - Green network planning and design - Energy efficient network hardware improvements - Energy-efficient communication protocols - Techniques for measuring and estimating power consumption in networks - Economic aspects and models of energy efficiency in networks -- - Important Dates: Abstract due: December 14, 2010 Full Paper Submission: December 18, 2010 Acceptance Notification: February 10, 2011 Camera ready due: March 1, 2011 -- - Guidelines for Submission: Authors are invited to submit full papers via the EDAS Conference Management System. Only original papers describing previously unpublished, not currently under review by another conference or journal, addressing state-of-the-art research and development must be submitted. All papers will be peer reviewed and accepted papers will appear in the workshop proceedings, LNCS published
[ns] (diffservice problem, looking for a site that I can get help) Your kind response will be highly appreciated
I'm using ns-allinone-2.29 with sip and mobility package install. I have been able to send two udp traffic and sip messages cos I have two sip proxy in my topology to two MultifaceNode that contain UMTS, WIMAXS and WIFI .I created a udp connection between the two sending host and MultiFaceNode . Then I sent udp packets accordingly. My code works well but when i applied differential service I get the folowing error: start_sip Policy Table(2): Flow (13 to 7): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 200.0 bps, PBS 3000.0 bytes. Flow (14 to 8): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 100.0 bps, PBS 3000.0 bytes. Policer Table: trTCM policer code point 10 is policed to yellow code point 11 and red code point 12. Simulation is running ... please wait ... Segmentation fault I connect the two sip proxy out of the differential service domain connecting proxy 2 to and access router and proxy1 to a node between host0 and host1 but I still get the same error. I also tried to use manual routing, but I can get a clue of the problem. Could someone help me? Please tell me how to solve this problem. Do I have to modify my topology or is there problrm with my addressing. I am using hierarchical addressing with 7 domain. I am running out of time as I supppose to have summit my report for my master thesis. I am abit confuse were I can turn to for help cos I usually don't get response from this site. Please anyone who can help? or knows any where I can get help to solve this problem do not hesitate to give an indication. if you need a copy of my code contact me by email:mine0...@yahoo.com Your kind response will be highly appreciated. Oncemore thanks for your understanding and cooperation. Regards Larry Mid Sweden Uni. --- On Fri, 12/10/10, jasmine Nforh Paula mine0...@yahoo.com wrote: From: jasmine Nforh Paula mine0...@yahoo.com Subject: [ns] Your kind response To: ns-users@ISI.EDU Date: Friday, December 10, 2010, 7:15 PM Dear All, Your kind response to this problem will be highly appreciated. I have invested a lot of time, but I can not found the solution. Does anyone know the solution? or any idea may be. In my script I tried to run differential service with ns2.29. I am running out of time cos I suppose to hand my report by the end of month. I am running udp traffic. I have tried all the necessary configuration but can find the solution to differential service. The script runs well without differential service but when I implement differential service I get the following error: start_sip Policy Table(2): Flow (13 to 7): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 200.0 bps, PBS 3000.0 bytes. Flow (14 to 8): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 100.0 bps, PBS 3000.0 bytes. Policer Table: trTCM policer code point 10 is policed to yellow code point 11 and red code point 12. Simulation is running ... please wait ... Segmentation fault Your kind response will be highly appreciated Sincerely Lawrence --- On Thu, 12/9/10, Carlos T. Calafate calaf...@disca.upv.es wrote: From: Carlos T. Calafate calaf...@disca.upv.es Subject: [ns] [CFP] SUNSET 2011 (Networking 2011 workshop) To: ns-users@ISI.EDU Date: Thursday, December 9, 2010, 4:02 AM -- Workshop on Sustainable Networking (SUNSET 2011), May 13, 2011, Valencia, Spain (in conjunction with IFIP Networking 2011) Web page: http://www.networking2011.org/workshops/SUNSET.html CALL FOR PAPERS: -- Aim and Scope: The Workshop on Sustainable Networking (SUNSET 2011) is the 1st workshop on sustainable, green networking collocated with the Networking conference and sponsored by the IFIP Technical Committee on Communication Systems (TC6). The main objective of SUNSET 2011 is to bring together experts in the area of sustainable networking from both academia and industry. The workshop addresses issues with a high potential of energy savings in wireless and wired access for local and core networks. -- Workshop topics: - Energy-efficient broadband access networks - Sustainable wireless communication - Energy-efficient network management - Energy-efficient data center communication - Energy-efficient network components (routers, switches, etc.) - Network virtualization for reducing power consumption - Monitoring concepts for energy-efficient network management - Energy-efficient end-to-end networking - Green network planning and design - Energy efficient network hardware improvements - Energy-efficient communication protocols - Techniques for measuring and estimating power consumption in networks - Economic aspects and models
Re: [ns] Your kind and prompt response
Hi Ns-users, please can somebody help me solve this probem, i am using ns-2.29. i need the solution urgently cos i am working on my thesis which i have to submit the first draft by the end of this month. i am having problem with differential service in ns 2.29. Any person who opt to help should give me an indication accordingly or recommend me form a site that I can get help. Your kind response will be highly appreciated. Larry Nforh Mid Sweden Uni Starting Simulation... --- On Sat, 12/11/10, S.Ziaee s.ziae...@gmail.com wrote: From: S.Ziaee s.ziae...@gmail.com Subject: Re: [ns] Your kind response To: jasmine Nforh Paula mine0...@yahoo.com Cc: ns-users@isi.edu Date: Saturday, December 11, 2010, 4:45 AM A segmentation fault in Unix means an execution error due to the program's accessing memory which is not allocated to it. On Sat, Dec 11, 2010 at 3:45 AM, jasmine Nforh Paula mine0...@yahoo.com wrote: Dear All, Your kind response to this problem will be highly appreciated. I have invested a lot of time, but I can not found the solution. Does anyone know the solution? or any idea may be. In my script I tried to run differential service with ns2.29. I am running out of time cos I suppose to hand my report by the end of month. I am running udp traffic. I have tried all the necessary configuration but can find the solution to differential service. The script runs well without differential service but when I implement differential service I get the following error: start_sip Policy Table(2): Flow (13 to 7): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 200.0 bps, PBS 3000.0 bytes. Flow (14 to 8): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 100.0 bps, PBS 3000.0 bytes. Policer Table: trTCM policer code point 10 is policed to yellow code point 11 and red code point 12. Simulation is running ... please wait ... Segmentation fault Your kind response will be highly appreciated Sincerely Lawrence --- On Thu, 12/9/10, Carlos T. Calafate calaf...@disca.upv.es wrote: From: Carlos T. Calafate calaf...@disca.upv.es Subject: [ns] [CFP] SUNSET 2011 (Networking 2011 workshop) To: ns-users@ISI.EDU Date: Thursday, December 9, 2010, 4:02 AM -- Workshop on Sustainable Networking (SUNSET 2011), May 13, 2011, Valencia, Spain (in conjunction with IFIP Networking 2011) Web page: http://www.networking2011.org/workshops/SUNSET.html CALL FOR PAPERS: -- Aim and Scope: The Workshop on Sustainable Networking (SUNSET 2011) is the 1st workshop on sustainable, green networking collocated with the Networking conference and sponsored by the IFIP Technical Committee on Communication Systems (TC6). The main objective of SUNSET 2011 is to bring together experts in the area of sustainable networking from both academia and industry. The workshop addresses issues with a high potential of energy savings in wireless and wired access for local and core networks. -- Workshop topics: - Energy-efficient broadband access networks - Sustainable wireless communication - Energy-efficient network management - Energy-efficient data center communication - Energy-efficient network components (routers, switches, etc.) - Network virtualization for reducing power consumption - Monitoring concepts for energy-efficient network management - Energy-efficient end-to-end networking - Green network planning and design - Energy efficient network hardware improvements - Energy-efficient communication protocols - Techniques for measuring and estimating power consumption in networks - Economic aspects and models of energy efficiency in networks -- - Important Dates: Abstract due: December 14, 2010 Full Paper Submission: December 18, 2010 Acceptance Notification: February 10, 2011 Camera ready due: March 1, 2011 -- - Guidelines for Submission: Authors are invited to submit full papers via the EDAS Conference Management System. Only original papers describing previously unpublished, not currently under review by another conference or journal, addressing state-of-the-art research and development must be submitted. All papers will be peer reviewed and accepted papers will appear in the workshop proceedings, LNCS published by Springer-Verlag, in the Lecture Notes in Computer Science (LNCS) series. (TBC) Papers must be written in English and should follow the instructions in the Springer template file available in both
[ns] Your kind response
Dear All, Your kind response to this problem will be highly appreciated. I have invested a lot of time, but I can not found the solution. Does anyone know the solution? or any idea may be. In my script I tried to run differential service with ns2.29. I am running out of time cos I suppose to hand my report by the end of month. I am running udp traffic. I have tried all the necessary configuration but can find the solution to differential service. The script runs well without differential service but when I implement differential service I get the following error: start_sip Policy Table(2): Flow (13 to 7): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 200.0 bps, PBS 3000.0 bytes. Flow (14 to 8): trTCM policer, initial code point 10, CIR 100.0 bps, CBS 2000.0 bytes, PIR 100.0 bps, PBS 3000.0 bytes. Policer Table: trTCM policer code point 10 is policed to yellow code point 11 and red code point 12. Simulation is running ... please wait ... Segmentation fault Your kind response will be highly appreciated Sincerely Lawrence --- On Thu, 12/9/10, Carlos T. Calafate calaf...@disca.upv.es wrote: From: Carlos T. Calafate calaf...@disca.upv.es Subject: [ns] [CFP] SUNSET 2011 (Networking 2011 workshop) To: ns-users@ISI.EDU Date: Thursday, December 9, 2010, 4:02 AM -- Workshop on Sustainable Networking (SUNSET 2011), May 13, 2011, Valencia, Spain (in conjunction with IFIP Networking 2011) Web page: http://www.networking2011.org/workshops/SUNSET.html CALL FOR PAPERS: -- Aim and Scope: The Workshop on Sustainable Networking (SUNSET 2011) is the 1st workshop on sustainable, green networking collocated with the Networking conference and sponsored by the IFIP Technical Committee on Communication Systems (TC6). The main objective of SUNSET 2011 is to bring together experts in the area of sustainable networking from both academia and industry. The workshop addresses issues with a high potential of energy savings in wireless and wired access for local and core networks. -- Workshop topics: - Energy-efficient broadband access networks - Sustainable wireless communication - Energy-efficient network management - Energy-efficient data center communication - Energy-efficient network components (routers, switches, etc.) - Network virtualization for reducing power consumption - Monitoring concepts for energy-efficient network management - Energy-efficient end-to-end networking - Green network planning and design - Energy efficient network hardware improvements - Energy-efficient communication protocols - Techniques for measuring and estimating power consumption in networks - Economic aspects and models of energy efficiency in networks -- - Important Dates: Abstract due: December 14, 2010 Full Paper Submission: December 18, 2010 Acceptance Notification: February 10, 2011 Camera ready due: March 1, 2011 -- - Guidelines for Submission: Authors are invited to submit full papers via the EDAS Conference Management System. Only original papers describing previously unpublished, not currently under review by another conference or journal, addressing state-of-the-art research and development must be submitted. All papers will be peer reviewed and accepted papers will appear in the workshop proceedings, LNCS published by Springer-Verlag, in the Lecture Notes in Computer Science (LNCS) series. (TBC) Papers must be written in English and should follow the instructions in the Springer template file available in both LaTeX and Microsoft Word format. The first page should include paper title, an abstract of about 150 words,3-5 keywords indicating the paper topic area and symposium, name and affiliation of author(s) as well as the corresponding author's e-mail and postal addresses. Maximum paper length is 8 printed pages (10-point font). -- Organizing Committee -Workshop Chairs Laurent Lefevre, INRIA, University of Lyon, France e-mail: laurent.lefe...@ens-lyon.fr Rastin Pries, University of Wuerzburg, Germany e-mail: pr...@informatik.uni-wuerzburg.de -- ** Carlos Calafate, PhD IFIP Networking 2011 Publicity Chair Computer Networks Group (GRC) Technical University of Valencia, Spain Voice: +34 96 387 7007 ext. 75727 Fax: +34 96 387 7579 E-mail: calaf...@disca.upv.es **
[ns] Your kind response
Hello Salvi, Thanks oncemore for finding time from your busy schedule to help me go through this work. I have got all the necessary but I can explain why I can't sort out how package is send to the UMTS base station and interface as it does for WiMAX and Wifi. for example: At 30.131050 in 4.0.1 ND module received RA from node 4.0.0 router-lifetime=1800.00 s prefix valid_lifetime=5 s prefix=4.0.0 advertisement interval=1000 ms - New neighbor At 30.131050 in 5.0.0 Handover1 received new prefix 4.0.0 old address: 4.0.1, prefix=4.0.0, new address will be 4.0.1 At 30.131050 in 5.0.0 MIH Agent sending capability discovery request The new up interface is better...checking for flows to redirect Studying flow 0 using interface 0.0.2 Must redirect flow from interface 0.0.2 to 4.0.1 The new up interface is better...checking for flows to redirect Studying flow 0 using interface 4.0.1 Must redirect flow from interface 4.0.1 to 4.0.1 At 30.131050 MIPv6 Agent in 5.0.0 send redirect message using interface 4.0.1 At 30.162105 MIPv6 Agent in 1.0.1 received redirect packet from 4.0.1 At 30.190739 MIPv6 Agent in 5.0.0 received ack for redirect packet from 1.0.1 At 30.236881 in 4.0.0 MIH Agent received capability discovery request At 30.236881 in 4.0.0 MIH Agent sending capability discovery response At 30.238783 in 5.0.0 MIH Agent received capability discovery response At 30.238783 in 5.0.0 Handover1 received MIH_Capability_discover.confirm Remote MIHF: Id = 2, Here I think this where the first hand over take place. I my output file i can get series of WiMax to Wifi to Mimax but not UMTS like as follows: 217.0 -It exp -Il 160 -If 2 -Ii 1476 -Iv 28 + 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 + 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 + 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 - 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 - 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 - 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 r 30.813006 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 r 30.813006 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 r 30.813006 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 s -t 30.814490190 -Hs 13 -Hd 16777217 -Ni 13 -Nx 1000.00 -Ny 1000.00 -Nz 0.00 -Ne -1.00 -Nl MAC -Nw --- -Ma 0 -Md 600 -Ms 8 -Mt 0 -Is 4194305.0 -Id 16777217.0 -It exp -Il 166 -If 2 -Ii 1478 -Iv 28 r -t 30.815202925 -Hs 14 -Hd 16777217 -Ni 14 -Nx 512.45 -Ny 1000.00 -Nz 0.00 -Ne -1.00 -Nl MAC -Nw --- -Ma 0 -Md 600 -Ms 8 -Mt 0 -Is 4194305.0 -Id 16777217.0 -It exp -Il 160 -If 2 -Ii 1478 -Iv 28 and s -t 133.330589167 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw --- -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 220 -If 2 -Ii 6502 -Iv 28 r -t 133.330923779 -Hs 12 -Hd 12582913 -Ni 12 -Nx 699.99 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw --- -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6502 -Iv 28 + 133.334584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2813 6504 - 133.334584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2813 6504 r 133.349585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2813 6504 + 133.354584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2814 6506 - 133.354584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2814 6506 r 133.369585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2814 6506 d -t 133.374179397 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl RTR -Nw CBK -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6504 -Iv 28 d -t 133.374179397 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw RET -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6504 -Iv 28 + 133.374584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2815 6508 - 133.374584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2815 6508 r 133.389585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2815 6508 + 133.394584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2816 6510 - 133.394584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2816 6510 d -t 133.401157776 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl RTR -Nw CBK -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6506 -Iv 28 d -t 133.401157776 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw RET -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6506 -Iv 28 r 133.409585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2816 6510 + 133.414584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2817 6512 - 133.414584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2817 6512 d -t 133.425746867 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl RTR -Nw CBK -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6508 -Iv 28 d -t 133.425746867
Re: [ns] adding a function
Hello Everyone, I can't explain why I can't sort out how package is send to the UMTS base station and interface as it does for WiMAX and Wifi. for example: At 30.131050 in 4.0.1 ND module received RA from node 4.0.0 router-lifetime=1800.00 s prefix valid_lifetime=5 s prefix=4.0.0 advertisement interval=1000 ms - New neighbor At 30.131050 in 5.0.0 Handover1 received new prefix 4.0.0 old address: 4.0.1, prefix=4.0.0, new address will be 4.0.1 At 30.131050 in 5.0.0 MIH Agent sending capability discovery request The new up interface is better...checking for flows to redirect Studying flow 0 using interface 0.0.2 Must redirect flow from interface 0.0.2 to 4.0.1 The new up interface is better...checking for flows to redirect Studying flow 0 using interface 4.0.1 Must redirect flow from interface 4.0.1 to 4.0.1 At 30.131050 MIPv6 Agent in 5.0.0 send redirect message using interface 4.0.1 At 30.162105 MIPv6 Agent in 1.0.1 received redirect packet from 4.0.1 At 30.190739 MIPv6 Agent in 5.0.0 received ack for redirect packet from 1.0.1 At 30.236881 in 4.0.0 MIH Agent received capability discovery request At 30.236881 in 4.0.0 MIH Agent sending capability discovery response At 30.238783 in 5.0.0 MIH Agent received capability discovery response At 30.238783 in 5.0.0 Handover1 received MIH_Capability_discover.confirm Remote MIHF: Id = 2, Here I think this where the first hand over take place. I my output file i can get series of WiMax to Wifi to Mimax but not UMTS like as follows: 217.0 -It exp -Il 160 -If 2 -Ii 1476 -Iv 28 + 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 + 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 + 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 - 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 - 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 - 30.798004 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 r 30.813006 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 r 30.813006 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 r 30.813006 4 13 exp 160 --- 2 1.0.1.0 4.0.1.0 673 1478 s -t 30.814490190 -Hs 13 -Hd 16777217 -Ni 13 -Nx 1000.00 -Ny 1000.00 -Nz 0.00 -Ne -1.00 -Nl MAC -Nw --- -Ma 0 -Md 600 -Ms 8 -Mt 0 -Is 4194305.0 -Id 16777217.0 -It exp -Il 166 -If 2 -Ii 1478 -Iv 28 r -t 30.815202925 -Hs 14 -Hd 16777217 -Ni 14 -Nx 512.45 -Ny 1000.00 -Nz 0.00 -Ne -1.00 -Nl MAC -Nw --- -Ma 0 -Md 600 -Ms 8 -Mt 0 -Is 4194305.0 -Id 16777217.0 -It exp -Il 160 -If 2 -Ii 1478 -Iv 28 and s -t 133.330589167 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw --- -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 220 -If 2 -Ii 6502 -Iv 28 r -t 133.330923779 -Hs 12 -Hd 12582913 -Ni 12 -Nx 699.99 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw --- -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6502 -Iv 28 + 133.334584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2813 6504 - 133.334584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2813 6504 r 133.349585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2813 6504 + 133.354584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2814 6506 - 133.354584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2814 6506 r 133.369585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2814 6506 d -t 133.374179397 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl RTR -Nw CBK -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6504 -Iv 28 d -t 133.374179397 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw RET -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6504 -Iv 28 + 133.374584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2815 6508 - 133.374584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2815 6508 r 133.389585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2815 6508 + 133.394584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2816 6510 - 133.394584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2816 6510 d -t 133.401157776 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl RTR -Nw CBK -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6506 -Iv 28 d -t 133.401157776 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw RET -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6506 -Iv 28 r 133.409585 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2816 6510 + 133.414584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2817 6512 - 133.414584 4 11 exp 160 --- 2 1.0.1.0 3.0.1.0 2817 6512 d -t 133.425746867 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl RTR -Nw CBK -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is 4194305.0 -Id 1258291 3.0 -It exp -Il 160 -If 2 -Ii 6508 -Iv 28 d -t 133.425746867 -Hs 11 -Hd 12582913 -Ni 11 -Nx 680.00 -Ny 1000.00 -Nz 0.00 -N e -1.00 -Nl MAC -Nw RET -Ma d4 -Md 5 -Ms 4 -Mt 800 -Is