How are you Friends?
My simulation software is NS2, and i am a novice in using it and i feel that it
is like a big sea, i do not know its bounderies.
So please help me if you can.
In my simulation, when generating a new node in the simulation it
should has unique IP address (that consists of 1
hi,i have simulated LEACH protocol for 10 nodes in ns-2. 29 with mannasim and
observe that the trace file show nodes greater than 10 with tag -Hd when
packets are received. i have marked the portion of trace with error in red.
please guide why i getting this and how to resolve this issue?
re
Hi,i m simulating and i have a created a procedure for sink but when i execute
i get the sensor node configuration error. the same configuration works well
for common sensing node in the main program but when i try to call a procedure
it gives this error for both sensing node and the sink.ple
hello,
I want to implement a new protocol Multipath Source Routing (MSR) is an
extension of DSR (Dynamic Source Routing) that incorporates the multipath
mechanism into DSR. MSR is an adaptive routing for ad hoc networks. It
considers the two fundamental issues in its design. MSR may adapt to
top
am working in wimax model
when am increasing the mobile node to more then 5 node i get this error
anyone know how to fix this please help me out
Configuration of hierarchical addressing done
num_nodes is set 9
sink node created
INITIALIZE THE LIST xListHead
warning: no class variable WimaxSche
Dear All,
I am using ns-2.34 and have written some c++ codes and
added them under the ns-2.34 sub-directory. I did
"make clear", but when I did "make" to re-compile, the following error
(see below)
occur. Can anyone help me.
Thanks alot.
M.A.
...
hi
can any one plz tell me why is the wimax model inside the nist mobility model
in ns-2.29 cant work
when i want to run wimax script its not working like for example the the wimax
example inside tcl directory
plz help me guys ..
best regards
sandy
Hi all WSN user
Please tell me how different queues are implemented for heterogeneous
traffic in sensor nodes, so that each data send to his proper queue.
Bundle of thanks
Best reguards
Moazzam
Am trying to install Ns2 and i got the following error message. please kindly
reply if u know the solution.
checking for otcl.h... -I../otcl-1.0a7
checking for libotcl1.0a7... -L../otcl-1.0a7 -lotcl
checking for tclcl.h... -I../tclcl-1.0b11
checking for libtclcl... -L../tclcl-1.0b11 -ltclcl
che
I am trying to implement the multicasting protocols in the Ns 2.18b-mcast
thats why i am trying to use the Ns 2.18b. Please do u know anything on how
to implement the multicasting protocols. i am trying to implement the ODMRP
and the ADMR protocols. What do u think i can do or what can i do to us
Hi,
Get ns2 version 2.34, 2.1b is ancient, it wont work easily.
--
Best Regards,
Imran Khan
Research Engineer
Network and Service Architecture Lab
Institute Telecom, Telecom SudParis, CNRS Lab UMR5157
9 rue Charles Fourier, 91011 Evry, France
+33 (0) 6 10 91 00 63
http://www.about.me/imr
Thanks alot for your reply. i am using ubuntu 10.04 and the NS2 version is
the NS 2.1b8.
Thanks.
Imran khan-9 wrote:
>
>
> Hi,
>
> which OS and NS2 version you are using?
> --
>
> Best Regards,
>
> Imran Khan
>
> Research Engineer
>
> Network and Service Architecture Lab
>
> Institut
Hi,
which OS and NS2 version you are using?
--
Best Regards,
Imran Khan
Research Engineer
Network and Service Architecture Lab
Institute Telecom, Telecom SudParis, CNRS Lab UMR5157
9 rue Charles Fourier, 91011 Evry, France
+33 (0) 6 10 91 00 63
http://www.about.me/imrankhan1984
On Wed,
i got this error message when installing ns2. please who knows the solutions.
* Build Tclcl-1.0b11
loading cache ./config.cache
No .configure file found in current director
am trying to do installation of ns2 and got this error.. does anybody know
the solution..Please reply if you do.. Thanks
Tcl.cc: In member function ‘int TclObject::traceVar(const char*,
TclObject*)’:
Tcl.cc:421: warning: deprecated conversion from string constant to ‘char*’
Tcl.cc: In static mem
Dear,
This error occurs when you specify an external file to read from tcl script.
I think that either you have given the wrong path of your file or you have
done any spelling mistake.
Recheck this.
Furthurmore if "setdest" is you movement pattern file and you are using "
./setdest " then you mus
hi
am trying to run a tcl file , i have , and there is some movement pattern , so
i generat the movement file using , " cmu-scen-gen/setdest. " ./setdest
but when i try to run it i get this error . can anyone please tell me whats its
mean ..
INITIALIZE THE LIST xListHead
*** NOTE: no connecti
Hi
I am using mannasim framework.
I wants that some node generate carbon data generator and some node
generate temperature data. How to implement this in create common node
procedure.
Thanks in advance
Best regards
Moazzam
Hi,
After adding a new protocol, you should type make than you should type make
install as a root. If you do so, you won't have this error.
From: N_F
To: ns-users@ISI.EDU
Sent: Friday, June 3, 2011 10:24 AM
Subject: [ns] Please help me with this error
Hi all,
I have an agent implemented in ns which used to work properly before, but
now when I am trying to run different tcl files I m getting the same error
as below:
ns:
[code omitted because of length]
: invalid command name "Agent/hoperaa"
while executing
"Agent/hoperaa set packetSize_ 40
-- Forwarded message --
From: xiue ns2
Date: 2010/10/31
Subject: Please help: ns2 p2p WLAN application code compile error
To: ns-users@isi.edu
Dear all,
I want to do a TCP simulation to evaluate TCP performance, below is the
source code which I download from network, but I just
Dear all
I can't find the related files to FSK Modulation (NRZ) in NS2.34.
How can I find (or probably implement) this propagation model.
i found bpsk in Modulation.h but i can't find fsk.
I am looking forward to receiving your comments & related codes for NS2.
Thanks in advance,
Kind reg
Hi,
I am a new to NS2 and trying to simulate various routing protocols. I
followed many tutorial provided on internet.
I am using the below codes for simulating shortest path, distance vector
and link state routing and i need some help in this.
Queries:
1) Are the below code correct to perform
Hi everyone
I am very new to NS2 and ns2 manual is not user friendly at all.
I need to be able to broadcast a single UDP packet at unpredictable
moments(determined through the program logic). This broadcast is initiated
by one of the 400 nodes present in the MANET Network and every other
within-
Hi,
Iam doing proj on WMN's For Simulation of WMNs after googled i
got patch Ns2mesh80216(Wimax),it patched successfully but on
re-installing of ns-2.33 it failed wimax.Please help me to Simulate
WMNs..Sample Tcl scripts Tutorial for Simulation.
this my 3rd post till know i didn't get one po
i'm a beginner to ns2.
I installed the NS2.34 on obuntu. and it's validated. now I'm going to start
with a simple example that I found from the net.i save it in my home folder.
when I write $ns simple.tcl
it says:
simple.tcl does not exist, try again
I know that this error is for directo
Dear Mr. Wei,
I think yes. This awk script for DSR routing protocol mainly. For other
protocols like AODV, Tora you need to do some modification like changing (
$35 =="DSR") to the destination protocol like AODV if you simulate AODV ).
To do the correct changes and modifications, I advise yo
Its very easy. just learn how to draw graph in MatLab. It's will take 15
minutes only, try to learn how to plot more than graph in the same graph.
http://web.cecs.pdx.edu/~gerry/MATLAB/plotting/linePlots.html
http://www.mathworks.com/access/helpdesk/help/techdoc/ref/plot.html
http://www.caspur.it
Hi all,
Please help to show me how to run multiple replications for a wireless sensor
network simulation.
I am able to run my simulation for one time. Now I want to run about 40
replications.
Please help me.
Thank you very much,
Huy
Windows Live: Keep your friends up to date with w
Hi,
You may run "make" again from NS2 directory. It will create ns.exe.
Best Regards,
Teerawat
On 9/22/2009, "Sula K" wrote:
>
>Daer my brothers,
>
>in ns 2 I did rm ns.exe instead rm nam.exe ,
>
>after that when iexcuted the following problem come out on the screen?
>
>u...@user-cfab0b1f5
Daer my brothers,
in ns 2 I did rm ns.exe instead rm nam.exe ,
after that when iexcuted the following problem come out on the screen?
u...@user-cfab0b1f55 ~
$ ns.exe
bash: ns.exe: command not found
I have some problem with my NS
Can you tell me about zrp.path in NS,,,
I very need your help
Thanks
mr.ali.balador
homepage:www.balador.org
- Forwarded Message
From: ali bala
To: Maggi.
Sent: Wednesday, August 12, 2009 12:47:22 PM
Subject: Re: please help me fo installing 802.11etkn
hi
i have a same problem
i installed ns-2.33 and when i modify my makefile and follow the
Hi,
I have a variable in Trace class (trace.h). That named ntcCount_
I want to access this variable using tcl:
I use bind("ntcCount_", &ntcCount_);
and in tcl file:
set mytrace [new Trace]
and get value of this variable:
puts "value = [$mytrace set ntcCount_]"
But I Can't. Some error occur.
Pleas
Hi all,
I am trying to measure the average queue delays over all the nodes in
an ethernet setup under ns. Since the ethernet setup is not a typical
link
to link setup but a shared medium one, how should I be measuring the
queue delays ?
thanks for any help,
Prince
Hello everyone,
I have a topology:
Node2___Node3
/ \
/ \
node0Node1 Node5__Node6
\ /
\_Node4___/
(Node0 link to
Hello Ubaid,
Hello everyone,
I want to count the number of packet that is received (forwarded) on the
intermediate node.
Node0_Node3___Node4
/
/
/
/
Node2_/
I want to count on node3, when I sent
/
>/
> Node2__/
> Thanks Ubaid, againt.
>
> ===
> Nguyen Tan Cam
>
> HCMUS
> ===
>
>
>
> --- On Thu, 5/28/09, obaid abbasi wrote:
>
> > From: obaid abbasi
> > Subject: Re: [ns]
hi
all traffic are logged in the trace file. Each node created has a unique
ID and the packet seen by this node is logged with the node unique ID
in the trace file. So you could use an awk script to count the number of
packets seen on Node3
greetings
tan cam wrote:
>
> Hi everyone,
> I have t
Hi everyone,
I have the problem when I try to count the number of packet, that the
intermediate node received.
I have a topology, that have 4 nodes (following figure):
node1_Node3___Node4
/
/
/
/
node2__/
That mea
Hello all,
I have tried to collect the information of initial energy of a node using
the trace information
s 0.000665000 _19_ MAC --- 0 AODV 55 [0 13 800] [energy
*0.04*ei 0.000 es 0.000 et 0.000 er 0.000] --- [19:255 -1:255
30 0] [0x2 1 1
[6 0] [19 4]] (REQUEST)
or
N -t 0.00
hi to all!
I am a newer about NS. my interesting is multicast congestion control. I have
some problems when I run SMCC[Gu-In Kwon and John W. Byers. Smooth Multirate
Multicast Congestion Control.IEEE INFOCOM 2003]
I have downloaded SMCC source codes from the writer's websit:
http://cs-peo
i'm new user to NS2, i have installed the NS2 "ns-allinone-2.31" package
under the shell of Cygwin over windows xp and there is no problem appeared
in the installation
but when i try to run a ns program this error appear
$ nam:
[code omitted because of length]
no event type or button # or
I'm a newer of NS.
I'm making simulations on Multicast. The error message is as follows:
(_o3 cmd line 1)
invoked from within
"_o3 cmd queue-parameter _o17 _o24 2 6"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set c
Hi users and friends,
I want to know more information about NS2. Is there any material which can give
more documentation about the statements used in NS2 program code ( both c++,
TCL and their linkage) especially for addressing and AODV. I went through
NS-Manual, Marc Greis Tutorial and NS by e
Hi,
I'm new to ns2. I've been trying to simulate a wireless scenario in which a
mobile node sends data to another mobile node. I attached two udp agents
with node0 with cbr traffic for both of them. Then i attached two null
agents to node1 to receive the data. Both the agents are started at the
Hello ns2 usersIam Veronica,pursuing my final year Bachelor of
TechnologyIam working on AODV implementation with power
consumption as cost metric. Please suggest me which CC.FILES i have to
modify for replacing shortest path with power consumption as cost
metric..and in which w
while creating a new protocol(Agent "New") i got this error please help...
invalid command name "Agent/New"
while executing
"Agent/New create _o36 "
invoked from within
"catch "$className create $o $args" msg"
invoked from within
"if [catch "$className create $o $args" msg] {
if [strin
sir i have to create a new header type so i searched in the net and
got the code in the website
http://www.isi.edu/nsnam/ns/tutorial/index.html.
But in packet.h PT_PING and name_[PT_PING]="ping" is already defined
and in ns-default.tcl Agent/Ping set packetSize_ 64 is also defined.
which version
Hi,
I don't think you want to classify packets in mac layer. Instead, you want
your packets to be submitted to aodv. Thus, in aodv.cc, you need to identify
your packets in AODV::recv(Packet *p). In fact, as you know, all packets first
arrive at such a recv function in any layer. So if you
Hi everybody,
I have installed GPSR on ns-2.31. Everything installed well as it seems
but when i run "./ns" command to compile it it shows this error message. Please
help if anyone aware of this.
$ ./nsns: [code omitted beacuse of length]: invalid command name "Agent/GPSR"
while
AFTER INSTALLING NS-ALLINONE-2.33 USING CYGWIN ON WINDOWS VISTA I GET THE
FOLLOWING MESSAGES.CAN ANYONE PLEASE HELP ME HOE TO PROCEED FROM HERE..MANY
THANKS.
please put
cygdrive/c/users/irfan/desktop/ns-allinone-2.33/bin:cygdrive/c/users/irfan/desktop/ns-allinone-2.33/tcl8.4.18/unix/:cygdrive/c/
Follow the link as below. It might help you.
http://www.geocities.com/naveedguy/NS2_problem_1.html
http://www.geocities.com/naveedguy/NS2_problem_1.html
--
View this message in context:
http://www.nabble.com/Please-Help-for-%22invalid-command-Agent%22-tp9200745p18684440.html
Sent from the ns-
Hi all
I am currently working on ns-2.29.I am trying to implement my protocol and
hence made some changes to ns-2.29/mac/mac_802.11.cc .I try to test this with
my own tcl script.But I get the error "Scheduler:Event UID not valid!!"
I looked into the forum and tried to inlcude
"if(mhD
Hello respect NS-users,
when I simulated followed this website: http://www.cse.msu.edu/~wangbo1/ns2/
(Bo Wang's website),
But, I got the error messages since implemented $ns twoflows-1channel.tcl:
invalid command name "if{0}{"
while executing
"if{[info exists channel2_]}{"
(procedure "_o3" line
Dear all,
Please have anybody used the Ricean fading model in wireless simulation? is
so, how you have calculated both the recieve threshold and the carrier sense
threshold to determine the transmit range? is it correct to use the threshold.o
utility in ns-2 with TwoRayGround as the propa
Dear all,
Please have anybody used the Ricean fading model in wireless simulation? is
so, how you have calculated both the recieve threshold and the carrier sense
threshold to determine the transmit range? is it correct to use the threshold.o
utility in ns-2 with TwoRayGround as the propa
I am working on 802.11e as well.
1. For me the easiest answer was to not worry about the ns trace file,
and create my own. I count throughput at the MAC level by printing bytes
sent during the simulation, and use a perl script to get the statistics
afterward.
2. There are some tools to help y
hi all
I have a very urgent and desperate call for help. I am using NS2-31 and EDCA
patch of TU Berlin, for 802.11e. Please guide me how to:
1. get the MAC level throughput trace file (the TCL code etc.)
2. how I can evaluate the behaviour of H.264 over NS2 for some video frames.
Probably I am l
Hi all
In wireless scenario that picture of this show at below
Node 0 is sender and node 24 is receiver
I want to use UDP agent for this nodes
I use follow code for this purpose
Please tell me is the following file correct and suitable?
Why the CBR interval has not effect on time when the no
Hi all
In wireless scenario that picture of this show at below
Node 0 is sender and node 24 is receiver
I want to use UDP agent for this nodes
I use follow code for this purpose
Please tell me is the attached file correct and suitable?
Why the CBR interval has not effect on time when the nod
Dear all,
I have managed to make install ns-2-snapshot, but it didnt give me notice for
environmental variables? how should i set that?
& what is different working with snapshot than allinone? hould i copy my tcl
& scn to bin to run them?
how about nam? my snapshot doesnt come nam ? can
Hi BJ
To make the number 4 of process you should make the following:
you should save the patch in a file archive for example into the /home and
then you go to the terminal and executing the following command:
cd /home/ns-allinone-2.29/ns-2.29
when you make this, you enter to working director
Dear All NS-users,
I try to install ns2hcca source code decribed with website:
http://info.iet.unipi.it/~cng/ns2hcca/
However, I can't install about that.
As described this website, I have followed the precedure of installation.
But, I can't make sense of Number 4 of process. (attached by pic fi
Dear All users,
I like to test H.264 video transmission over IEEE 802.11e EDCA.
However, I have got some error that is segmentation dump error.
I don't know what is happening.
If someone know where the performing test tcl file is, please teach me about
that.
otherwise, one who figure out this pr
Hello everyone,
I am a student doing my project about routing with different address scheme.
Now I have encountered some problems when I try to implement DV routing
protocol in a network with hierarchical addresses:
1. The protocol can only be implemented on some nodes, rather than the
HELLO,
I want to reach a member variable of the class AODV and to modify it in
MAC_802-11.
For this reason I get instance of Routing Agent AODV as explain in website
Veiled how I recovered this variable:
In file mac_802-11.h I added:
#include "aodv/aodv.h"
In file mac_802-11.cc
HELLO,
I want to reach a memeber variable in aodv to modify in Mac.
For this reason I get instance of Routing Agent AODV as explain in website
Veiled how I recovered this variable:
In file mac_802-11.h I added:
#include "aodv/aodv.h"
In file mac_802-11.cc I added:
void Mac802_11::
Hi all,
I am a new user of NS-2. Can one please help me to install LEACH
Protocol in NS-2. I tried it with the following commands:
Add DMIT_uAMPS to the DEFINE list
Add -I./mit/rca -I./mit/uAMPS to the INCLUDE list Add the following just
prior to the line gaf/gaf.o \ mit/rca/ener
modify cmutrace.cc
mahi kapoor wrote:
>
>
>
> hello everyone
> i have introduced a new packet checkloop in maodv but when i run a tcl
> script
> regarding maodv getting error
> format_aodv:invalid AODV packet type
> also i have done a little change in mact pkt. format.
> i m atta
Hello guys,
I badly needed your help. This is urgent.
I have posted already some questions regarding my problem but there was no
reply.
http://mailman.isi.edu/pipermail/ns-users/2007-April/059757.html
http://mailman.isi.edu/pipermail/ns-users/2007-April/059765.html
Is there someone who did a stu
hello everyone
i have introduced a new packet checkloop in maodv but when i run a tcl script
regarding maodv getting error
format_aodv:invalid AODV packet type
also i have done a little change in mact pkt. format.
i m attaching two files related to it.
please help me
regards
mahi
hi dear friends
I have added a code(createTime) to node configuration in ns-lib.tcl such
that at specific time
add new (DSDV) mobile nodes to current nodes but in setdest command usually
I
receive "segmentation fault" error!!
i attach ns-lib.tcl and 1.tcl in email
Please check those and solve my
Hi ns users,
I am facing problems when i try to exceute wireless.tcl,wireless1.tcl and
wireless2.tcl can anyone tell what the problem may be and provide a
solution.
I got the error message when i tried to excecute wireless.tcl found in
ns-2.30/tcl/ex/wireless.tcl directory
can anyone help deb
hi dear friends
when i run my tcl code i get Following error.
what is your idea about this error?
I'm waiting for your reply
Thanks in advance
ns: MobileDeployment 5 5 10 20: can't schedule command in past
(_o5 cmd line 1)
invoked from within
"_o5 cmd at 0.0 {_o135 start-dsdv}"
invok
> Sent: terça-feira, 20 de Março de 2007 22:14
> To: ns-users@ISI.EDU
> Subject: [ns] Please help me
>
>
> hi all
> in general
>
> how to capture return value of c++ function in tcl?
> --
> Amin Irandoost
hi all
in general
how to capture return value of c++ function in tcl?
--
Amin Irandoost
hi dear friends
how to read variable value of C++ in OTCL??
for example a partial of code are
class test:public TclObject{
public:
int i;
test();
.
.
.};
test::test(){
bind("i_",&i);
}
in Tcl write this:
set te [new test]
set x [$te $i???] ??
--
Amin Irandoost
hii,
when i run "make" command in ns directory then i
get following errors, so please kindly give me
solution to remove following errors:
for i in indep-utils/cmu-scen-gen/setdest
indep-utils/webtrace-conv/dec
indep-utils/webtrace-conv/epa
indep-utils/webtrace-conv/nlanr
indep-utils/webtrace
Hi sir/madam,
I have to simulate NS2 code for 802.11 MAC PCF .
I downloaded code from this site
http://www.sm.luth.se/%7Edugdale/index/software.shtml
and tried to patch it to ns-2.1b8 .But its not at all patching to NS .I have
followed the same procedure given in the READ file.
Hi friends,
I want to run PCF operation In NS2.i downloaded the
patch from this site
http://www.sm.luth.se/~dugdale/index/software.shtml
I was unable to patch it to ns-allinone-2.1b8.
Please tell me how to patch it and how to run that PCF
code.
Thank you very much sir,
Thanking you,
Tarakap
Hi all,
I am working on video multicast stream. I downloaded the
EvalVid version used for NS. In that they have created
new agent called "myUDP" agent. I follwed all the
steps given in
http://hpds.ee.ncku.edu.tw/~smallko/ns2/Evalvid_in_NS2.htm
I made the relevant changes in the packet.h and
M
how do i generate xgraph from the trace file generated by this dsr code?
# Define options
set val(chan) Channel/WirelessChannel;# channel type
set val(prop) Propagation/TwoRayGround ;# radio-propagation
model
set val(netif) Phy/WirelessPhy;# networ
Hi all,
I am working on video multicast stream. I downloaded the
EvalVid version used for NS. In that they have created
new agent called "myUDP" agent. I follwed all the
steps given in
http://hpds.ee.ncku.edu.tw/~smallko/ns2/Evalvid_in_NS2.htm
I made the relevant changes in the packet.h and
M
Hi all,
This is my topology of wireless network.
a
b c d e
f g h
j k
l
letters correspond to wireless nodes.sources are: a,f,l and sink is : e
i want to sent traffic a-b-c-d-e and f-g-h-d-e and l-j-k-h-d-e
how can manually route this traffic in ns-2???
thanks in advanc
Hello everyone
First of all i wish all of you Happy & prosperous new year...may all your
problems get solved and you all keep enjoying
I hav added a new tcp agent named TCPPR. i hav done make successfully. But i m
getting following errors in my tcl script named testpr.tcl when i execute the
Hi all,
I am working on video multicast. I downloaded the
EvalVid version used for NS. In that they have created
new agent called "myUDP" agent. I follwed all the
steps given in
http://hpds.ee.ncku.edu.tw/~smallko/ns2/Evalvid_in_NS2.htm
I made the relevant changes in the packet.h and
Makefile
Someone please help me to run some example scripts on ns2.28
No one is actually giving me any examples?
Srirupa
On Sun, 02 Jul 2006 [EMAIL PROTECTED] wrote :
>Send Ns-users mailing list submissions to
> ns-users@isi.edu
>
>To subscribe or unsubscribe via the World Wide Web, visit
>
On 7/5/06, Antonella Santovito <[EMAIL PROTECTED]> wrote:
>
> Hello,
> I'm new to use ns2, so I'm using Eclipse IDE with CDT plugin in order to
> have a graphical support for writing the code(I have find another faq about
> this topic), but I'm not able to create a project because I don't know whi
Hello,
I'm new to use ns2, so I'm using Eclipse IDE with CDT plugin in order to
have a graphical support for writing the code(I have find another faq about
this topic), but I'm not able to create a project because I don't know which
files I have to include about ns2.
I give you some details:
I hav
hi, guys
I need to know the way for computing pause time, since i read many
publication using it, i guess some one of you know about it
your help very appreciated
saleh
On 5/16/06, Yahia saleh <[EMAIL PROTECTED]> wrote:
>
> hi, guys
> I need to know the way for computing pause time, since i read many
> publication using it, i guess some one of you know about it
> your help very appreciated
>
>
please i am a beginner in ns2 allenoline2.29 i have installed it in
linux and i did validation successfully i have runned some tcl and
nam scripts but i would like to know if i want to modify a routing
protocol such as DSR after modification in a class .cc i did make depend but
i noticed that no
Hi Pooja,
This is because mcast_totals... script try to parse trace outputs differently,
Change the parse format from
if($LINE =~ / --- \[(\W*)(\d*):(\W*)(\d*) (\d+):(\d+) (\d+)
(\d+)\] \[(\d+)\] (\d+) (\d+) (\S+)/o) {
to following
if($LINE =~ / --- \[(\d*):(\d*) (\d+):(\d+) (\d+) (\d+)\]
hi,
I m working on ODMRP of ns-2.1b8. The simulation is working properly but
when i m running mcast_total.pl script to get the packet information the
error is like
CBR Logging error.
I think the problem is because of the change in the trace format ns-2.1b8and
ns-2.28. But actually i m not unde
hi,
I m working on ODMRP of ns-2.1b8. The simulation is working properly but
when i m running mcast_total.pl script to get the packet information the
error is like
CBR Logging error.
I think the problem is because of the change in the trace format ns-2.1b8and
ns-2.28. But actually i m not unde
Hi
I tried to simulate sctp on ns-2.28.
I have readed the paper on
http://www.lib.ncsu.edu/theses/available/etd-05162005-094333/.
According to The FAQS of the paper , I modified two parts.
1.$ns_ node-config -wiredRouting OFF
2.commented out the line
//Tcl::instance().evalf("\%s no-slot \%l
One way to print routing table in aodv in ns-2.28 would be the following..
(Assuming you have basic familiarity with C++ and any general routing
table structure)
1. Declare a function - rt_display(int node_id) as a member of class
aodv_rtable (in file aodv_rtable.h)
node_id is an argument which y
Hi all ,
To print the routing table I have followed this steps :
1)I went to the file aodv_rtrace.h and add this line
void print(Trace*);
2) I wet to the file aodv_rtrace.cc and add this fuction
void
aodv_rtable::p
Check ns/tcl/lib/ns-lib.tcl... you will find out where this error message
comes from and how to fix it!!
>
> Hi everybody
>I am doing modifications to AODV protocol. I have added new packet
> types along with AODV_HELLO, AODV_RREQ etc... when I am sending a packet,
> I
> am receiving an
1 - 100 of 107 matches
Mail list logo