[ns] ns-make error
After apply the patch of obs simulator with ns2.27...i have following error... I have patch the obs simulator with ns2.27...after the make i see following msg make[1]: Entering directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/cmu-scen-gen/setdest' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/cmu-scen-gen/setdest' make[1]: Entering directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/dec' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/dec' make[1]: Entering directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/epa' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/epa' make[1]: Entering directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/nlanr' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/nlanr' make[1]: Entering directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/ucb' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/webtrace-conv/ucb' What is meant?? It is successfully patched or not?
Re: [ns] ns-make error
@Pinakini Nothing to be done for `all'. ? Why not Google , Nothing to be done for `all'. * You will get ~900,000,000 hits. Most will hopefully tell that »Nothing to be done for `all'.« means : Everything is OK. `Nothing to be done´ is the reply when 'make' is run more than one time. ( The first 'make' is done with the './install' command.) - -- View this message in context: http://network-simulator-ns-2.7690.n7.nabble.com/ns-make-error-tp29623p29624.html Sent from the ns-users mailing list archive at Nabble.com.
[ns] make error
hi,I m using ns-2.29 with mannasim and i have made few changes in leach protocol by adding two new send member functions “Hello” and Reply and its corresponding receive member function recvhello and recvreply just like cluster head advertisement and join request funcions in leachApp.cc and leachApp.h. I have declared the function recvHELLO_ and recvREPLY_ in leachApp.h but when i run the make it gives the following errors for the corresponding receive functions. please guide how to resolve this.regards,najma ismatmannasim/leach/app/leachApp.cc: At global scope:mannasim/leach/app/leachApp.cc:995: error: no ‘void LeachApp::recvHELLO_(char*, int, double, int, int)’ member function declared in class ‘LeachApp’mannasim/leach/app/leachApp.cc: In member function ‘void LeachApp::clearClusterChoices()’:mannasim/leach/app/leachApp.cc:1106: warning: deleting ‘void*’ is undefinedmannasim/leach/app/leachApp.h: At global scope:mannasim/leach/app/leachApp.h:210: warning: inline function ‘void LeachApp::recvReply_(char*, int)’ used but never defined./mannasim/sensorBaseApp.h:84: warning: inline function ‘virtual void DisseminatingTimer::expire(Event*)’ used but never defined./mannasim/dataGenerator.h:65: warning: inline function ‘virtual void EventTimer::expire(Event*)’ used but never defined./mannasim/dataGenerator.h:52: warning: inline function ‘virtual void SensingTimer::expire(Event*)’ used but never definedmake: *** [mannasim/leach/app/leachApp.o] Error 1
Re: [ns] make error of Xgraph-12.1 configuration with ns-2.34
Try this one : sudo apt-get install xgraph 2012/11/12 Muhammad Javed javed_u...@yahoo.com Hi all, I have installed NS2.34 it is working fine but xgraph is not working, I go to xgraph directory located into ns-allinone-2.34 when I executed make it displaying errors as below: [root@localhost ns-allinone-2.34]# cd xgraph-12.1 [root@localhost xgraph-12.1]# ./configure loading cache ./config.cache checking for a BSD compatible install... (cached) /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... missing checking if malloc debugging is wanted... no checking for gcc... (cached) gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking how to run the C preprocessor... (cached) gcc -E checking for X... (cached) libraries , headers checking for dnet_ntoa in -ldnet... (cached) no checking for dnet_ntoa in -ldnet_stub... (cached) no checking for gethostbyname... (cached) yes checking for connect... (cached) yes checking for remove... (cached) yes checking for shmat... (cached) yes checking for IceConnectionNumber in -lICE... (cached) yes checking for float.h... (cached) yes checking for limits.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for unistd.h... (cached) yes checking for strcasecmp... (cached) yes creating ./config.status creating Makefile creating autoconf.h autoconf.h is unchanged [root@localhost xgraph-12.1]# make gcc -DHAVE_CONFIG_H -I. -I. -I.-g-c dialog.c dialog.c: In function ‘make_msg_box’: dialog.c:780: warning: passing argument 2 of ‘getline’ from incompatible pointer type /usr/include/stdio.h:653: note: expected ‘size_t * __restrict__’ but argument is of type ‘char *’ dialog.c:780: error: too few arguments to function ‘getline’ dialog.c: At top level: dialog.c:891: error: conflicting types for ‘getline’ /usr/include/stdio.h:653: note: previous declaration of ‘getline’ was here make: *** [dialog.o] Error 1 I think this error is preventing xgraph to be installed. Please help me out in this problem... Best regards, Muhammad Javed -- *Cordialement* *Basma Bejaoui* *Ingénieur Informatique, Génie Télécommunication et Réseaux * *+216 20 09 52 02 *
[ns] make error of Xgraph-12.1 configuration with ns-2.34
Hi all, I have installed NS2.34 it is working fine but xgraph is not working, I go to xgraph directory located into ns-allinone-2.34 when I executed make it displaying errors as below: [root@localhost ns-allinone-2.34]# cd xgraph-12.1 [root@localhost xgraph-12.1]# ./configure loading cache ./config.cache checking for a BSD compatible install... (cached) /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... missing checking if malloc debugging is wanted... no checking for gcc... (cached) gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking how to run the C preprocessor... (cached) gcc -E checking for X... (cached) libraries , headers checking for dnet_ntoa in -ldnet... (cached) no checking for dnet_ntoa in -ldnet_stub... (cached) no checking for gethostbyname... (cached) yes checking for connect... (cached) yes checking for remove... (cached) yes checking for shmat... (cached) yes checking for IceConnectionNumber in -lICE... (cached) yes checking for float.h... (cached) yes checking for limits.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for unistd.h... (cached) yes checking for strcasecmp... (cached) yes creating ./config.status creating Makefile creating autoconf.h autoconf.h is unchanged [root@localhost xgraph-12.1]# make gcc -DHAVE_CONFIG_H -I. -I. -I.-g-c dialog.c dialog.c: In function ‘make_msg_box’: dialog.c:780: warning: passing argument 2 of ‘getline’ from incompatible pointer type /usr/include/stdio.h:653: note: expected ‘size_t * __restrict__’ but argument is of type ‘char *’ dialog.c:780: error: too few arguments to function ‘getline’ dialog.c: At top level: dialog.c:891: error: conflicting types for ‘getline’ /usr/include/stdio.h:653: note: previous declaration of ‘getline’ was here make: *** [dialog.o] Error 1 I think this error is preventing xgraph to be installed. Please help me out in this problem... Best regards, Muhammad Javed
[ns] make error in ns2.29 when adding new protocol
plz help, I am adding a new protocol to ns2.29 called MPOLSR. from http://www.jiaziyi.com/documents/SER29_mpolsr.rar After following these commands : make clean export CC=gcc34 CXX=g++34 ./configure make I am getting this error: no rule to make target 'olsr/OLSR.o' needed by ns. Anyone can explain this what does it mean and how to resolve it. -- View this message in context: http://old.nabble.com/make-error-in-ns2.29-when-adding-new-protocol-tp33476546p33476546.html Sent from the ns-users mailing list archive at Nabble.com.
[ns] make error
*Dear all,* * I am having a problem when I run make command in ns2.29.* *The error I am getting is:* * * *make: *** No rule to make target 'olsr/OLSR.o',* *needed by 'ns'. Stop.* * Ns make failed!* * * *Please help me in resolving this error.* * * * * *Best regards,* *Mohit Bhasin*
[ns] make error
I am patching ns 2.28 with the tkn's edca model ,i get the following error message during the make process /mac/802_11e -o mac/wireless-phy.o mac/wireless-phy.cc mac/wireless-phy.cc: In member function `virtual void WirelessPhy::sendDown(Packet*)': mac/wireless-phy.cc:238: error: `RECVING' undeclared (first use this function) mac/wireless-phy.cc:238: error: (Each undeclared identifier is reported only once for each function it appears in.) mac/wireless-phy.cc:245: error: `SENDING' undeclared (first use this function) make: *** [mac/wireless-phy.o] Error 1 can anyone help Yared
Re: [ns] Patched NS Make error
Christopher Ogirri wrote: For the downgrading I used the command: rpm -Uvh -force * I am using CentOS 5.4. oh Thank you! Christopher Ogirri wrote: Sorry about the attachement. I was not aware. My first time on a mailing list. ok :-) - --- ManojKumar.A --- Blog: http://getch.wordpress,com Mailing list guidelines: http://goo.gl/xC874 -- View this message in context: http://old.nabble.com/Re%3A-Patched-NS-Make-error-tp30667645p30691265.html Sent from the ns-users mailing list archive at Nabble.com.
Re: [ns] Patched NS Make error
Christopher Ogirri wrote: I should note now that in order to install ns2.1b9 I had to basically install a much older version of gcc, precisely gcc 3.3.6. How did you manage to downgrade to a lower version of gcc? What OS are you using? For the downgrading I used the command: rpm -Uvh -force * I am using CentOS 5.4. Christopher Ogirri wrote: I have attached the file so that anyone can go through it. Sir! Attachments are not permitted in messages to mailing list. Sorry about the attachement. I was not aware. My first time on a mailing list.
Re: [ns] Patched NS Make error
Christopher Ogirri wrote: I should note now that in order to install ns2.1b9 I had to basically install a much older version of gcc, precisely gcc 3.3.6. How did you manage to downgrade to a lower version of gcc? What OS are you using? Christopher Ogirri wrote: I have attached the file so that anyone can go through it. Sir! Attachments are not permitted in messages to mailing list. - --- ManojKumar.A --- Blog: http://getch.wordpress,com Mailing list guidelines: http://goo.gl/xC874 -- View this message in context: http://old.nabble.com/Re%3A-Patched-NS-Make-error-tp30667645p30673716.html Sent from the ns-users mailing list archive at Nabble.com.
Re: [ns] Patched NS Make error
I have currently successfully installed ns2.1b9 on my CentOS 5 machine. After installation, I implemented the patch listed herehttp://www.cs.unh.edu/cnrg/people/sowmyam/ns-atm/ . Following the readme instructions( also found on that page) I was able to apply the patch and ./configure. I however encountered an error trying to run make. The error is listed below: g++-3.3.6 -c -DTCP_DELAY_BIND_ALL -DNO_TK -DNIXVECTOR -DTCLCL_CLASSINSTVAR -DNDEBUG -DLINUX_TCP_HEADER -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_0A8 -DHAVE_OTCL_H -DHAVE_LIBTK8_3 -DHAVE_TK_H -DHAVE_LIBTCL8_3 -DHAVE_TCL_H -DHAVE_CONFIG_H -DPGM -DPGM_DEBUG -DNS_DIFFUSION -I. -I/home/ktofa/ns_atm/ns2.1b9/ns-allinone-2.1b9/tclcl-1.0b12 -I/home/ktofa/ns_atm/ns2.1b9/ns-allinone-2.1b9/otcl-1.0a8 -I/home/ktofa/ns_atm/ns2.1b9/ns-allinone-2.1b9/include -I/home/ktofa/ns_atm/ns2.1b9/ns-allinone-2.1b9/include -I/usr/include/pcap -I./tcp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/main -I./diffusion3/lib -I./diffusion3/nr -I./diffusion3/ns -I./asim/ -o trace/trace.o trace/trace.cc In file included from trace/trace.cc:55: atm/atm.h:66: error: syntax error before `*' token make: *** [trace/trace.o] Error 1 In the file its complainig, there is a śtring'declaration before the * character. I fear this is the problem. I should note now that in order to install ns2.1b9 I had to basically install a much older version of gcc, precisely gcc 3.3.6. I have searched the mailing lists but have found nothing. I have attached the file so that anyone can go through it. Any help would be greatly appreciated.
[ns] Error : Ns make error installing ns2
Hello Everyone, I am an ns2 newbee and i am trying to install ns2.27 and not a new verison because the module i want to work with is implemented in this version and not compatible with any other version. The error i get is stated below. Please i will appreciate any help I can get as I am running behind schedule for my thesis. Thank you very much in advance. wonu...@ubuntu:~/ns-allinone-2.27/ns-2.27$ make g++-3.3 -c -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR -DNDEBUG -DLINUX_TCP_HEADER -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_8 -DHAVE_OTCL_H -DHAVE_LIBTK8_4 -DHAVE_TK_H -DHAVE_LIBTCL8_4 -DHAVE_TCL_H -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC -DCPP_NAMESPACE=no -DUSE_SINGLE_ADDRESS_SPACE -Drng_test -I. -I/home/wonuola/ns-allinone-2.27/tclcl-1.15 -I/home/wonuola/ns-allinone-2.27/otcl-1.8 -I/home/wonuola/ns-allinone-2.27/include -I/home/wonuola/ns-allinone-2.27/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -o tools/random.o tools/random.cc In file included from config.h:54, from tools/random.cc:40: autoconf.h:85: error: namespace `no' undeclared make: *** [tools/random.o] Error 1
[ns] make error on fedora,Ubuntu but no error when USing redhat??
Dear All, i've added the CBRP protocol in NS2.34 when typing make clean make i've got an error because of i have two .h file that mutually include each others this error apears only over a fedora13, Ubunto,Suse11.2 system but when Using the same code over Redhat 9 there was no error could any one help in this problem.. Eng.Haitham Ghalwash Computer and Control Engineering department Faculty of Engineering, Tanta University
[ns] make error
hi all.. i try ti implement antnet on NS-2.33 but i've problem when try to make install - when i run make. the last report like this : for i in indep-utils/cmu-scen-gen/setdest indep-utils/webtrace-conv/dec indep-utils/webtrace-conv/epa indep-utils/webtrace-conv/nlanr indep-utils/webtrace-conv/ucb; do ( cd $i; make all; ) done make[1]: Entering directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/cmu-scen-gen/setdest' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/cmu-scen-gen/setdest' make[1]: Entering directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/webtrace-conv/dec' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/webtrace-conv/dec' make[1]: Entering directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/webtrace-conv/epa' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/webtrace-conv/epa' make[1]: Entering directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/webtrace-conv/nlanr' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/webtrace-conv/nlanr' make[1]: Entering directory `/home/afia/ns-allinone-2.33/ns-2.33/indep-utils/webtrace-conv/ucb' make[1]: Nothing to be done for `all'. can anyone help me? thanks..
[ns] make error for GPSR hls-ns2-patch in ns2.29
hello,dear all: I am recently working on the vanet routing focused on GPSR protocol. I downloaded the patch from website: http://www.cn.uni-duesseldorf.de/staff/kiess/software/hls-ns2-patch After apply it, when i do make,it shows make:***[gpsr:gpsr-o] error 1. because there's ambiguous call of two function. gpsr.cc line1424 pd_timer-add(cmh-uid(), delay, (void*)p); gpsr.cc line1427 pd_timer-remove(cmh-uid()); // precaution then,I modified as followed: pd_timer-add((int32_t)cmh-uid(), delay, (void*)p); pd_timer-remove((int32_t)cmh-uid()); // precaution make again, error again as followed: . gpsr/gpsr.o:gpsr.cc:(.text$_Z13cross_segmentPdS_[cross_segment(double, d ouble, double, double, double, double, double, double, double*, double*)]+0x0): multiple definition of `cross_segment(double, double, double, double, double, do uble, double, double, double*, double*)' mobile/geo_util.o:geo_util.cc:(.text+0x78): first defined here /usr/lib/gcc/i686-pc-cygwin/3.4.4/../../../../i686-pc-cygwin/bin/ld: warning: au to-importing has been activated without --enable-auto-import specified on the co mmand line. This should work unless it involves constant data structures referencing symbols from auto-imported DLLs.Info: resolving __timezone by linking to __imp___timezo ne (auto-import) collect2: ld returned 1 exit status make:*** [ns] error 1. any help? thx a lot! ___ 好玩贺卡等你发,邮箱贺卡全新上线! http://card.mail.cn.yahoo.com/
[ns] make error
hi all while i am using make in my ns directory(ns-2.31): $ make clean; make depend; make it gives the following error Makefile:74: *** missing seperator (did you mean TAB instead of 8 speaces?) stopped Makefile:74: *** missing seperator (did you mean TAB instead of 8 speaces?) stopped Makefile:74: *** missing seperator (did you mean TAB instead of 8 speaces?) stopped i open Makefile.in file and remove above error but still gives the same problem. please explain what is this error regards,
[ns] make error HELP, its simple!!
-Mensaje original- De:miba...@unicauca.edu.co Fecha:18 de April de 2009 hi all, i have this problem when typing make in ns-2.26 directory: include -I/usr/local/ns-allinone-2.26/include -I/usr/include/pcap -o proxytrace.o proxytrace.cc In file included from /usr/include/stdlib.h:433, from proxytrace.cc:7: /usr/include/sys/types.h:194: declaration does not declare anything make[1]: *** [proxytrace.o] Error 1 how can i solve it ? I had changed some code and typed make before and it worked well, and now i get this error, I don't understand why please help me!!! thanks -- MENSAJE ENVIADO CON WMAIL 1.01 UNIVERSIDAD DEL CAUCA
[ns] make error
hi all, i have a problem when typing make in ns-2.26 directory: include -I/usr/local/ns-allinone-2.26/include -I/usr/include/pcap -o proxytrace.o proxytrace.cc In file included from /usr/include/stdlib.h:433, from proxytrace.cc:7: /usr/include/sys/types.h:194: declaration does not declare anything make[1]: *** [proxytrace.o] Error 1 how can i solve it ? I had changed some code and typed make before and it worked well, and now i get this error, I don't understand why please help me!!! thanks -- MENSAJE ENVIADO CON WMAIL 1.01 UNIVERSIDAD DEL CAUCA
[ns] make error
salam alikom how are u i need a help from u when i recompile ns2 to reflect changes that i made in ns2 files by typing make clean and make in ns2 directory appear to me the following error: std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test -I. -I. -I/home/mohammed_saad/1/ns-allinone-2.32/tclcl-1.19 -I/home/mohammed_saad/1/ns-allinone-2.32/otcl-1.13 -I/home/mohammed_saad/1/ns-allinone-2.32/include -I/home/mohammed_saad/1/ns-allinone-2.32/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite -I./wpan -o trace/cmu-trace.o trace/cmu-trace.cc In file included from trace/cmu-trace.cc:46: ../dsr/hdr_sr.h:292:8: warning: extra tokens at end of #endif directive trace/cmu-trace.cc: In member function `void CMUTrace::format_dsr(Packet*, int)': trace/cmu-trace.cc:446: error: `access' is not a member of `hdr_sr' make: *** [trace/cmu-trace.o] Error 1 can u help me what i do to solve this error? all regards mohammed
[ns] make error
Hello all ns users, I am using Ubuntu and ns-2.31. I have patched the AOMDV After patching i did make but I have got following error: trace/cmu-trace.o: In function `hdr_aomdv::access(Packet const*)': cmu-trace.cc:(.text._ZN9hdr_aomdv6accessEPK6Packet[hdr_aomdv::access(Packet const*)]+0x7): undefined reference to `hdr_aomdv::offset_' collect2: ld returned 1 exit status make: *** [ns] Error 1 can anybody tell me how to overcome this problem. Please help me. Regards Dinesh
[ns] make error while recompiling
Hi all, I am getting an error message while recompiling AODV after some changes i made to aodv.cc. I made those changes yesterday, recompiled successfully and run a sample tcl file to make sure that those changes are having an effect on the results. Everything looked to be ok, until today where i tried to bring the aodv.cc file back to its original form by deleting all the changes i made the day before. Now, when i am trying to recompile ns2 i get the following error message. make: *** No rule to make target `VERSION', needed by `gen/version.c'. Stop. I tried to reconfigure using ./configure. I am getting the same error message. I have not touched anything inside the Makefile or Makefile.in or any other files whatsoever. Does anyone have an idea of what the problem might be and how to fix that? Thanx in advance, Dimitris
[ns] make error
Hello I'm trying make and I get the following error. I am using ns-allinone-2.29 on cygwin. --- $ make g++ -c -Wall -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR -DNDEBUG -DUSE_ SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_11 -DHAVE_OTCL_H -DHAVE_LIBTK 8_4 -DHAVE_TK_H -DHAVE_LIBTCL8_4 -DHAVE_TCL_H -DHAVE_CONFIG_H -DNS_DIFFUSION -D SMAC_NO_SYNC -DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test -I. -I/ns -allinone-2.29/tclcl-1.17 -I/ns-allinone-2.29/otcl-1.11 -I/ns-allinone-2.29/incl ude -I/ns-allinone-2.29/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I. /tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./d iffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs - I./diffserv -I./satellite -I./wpan -o emulate/ether.o emulate/ether.cc emulate/ether.cc:47:26: net/ethernet.h: No such file or directory emulate/ether.cc: In static member function `static u_char* Ethernet::nametoaddr (const char*)': emulate/ether.cc:107: error: 'struct ifreq' has no member named 'ifr_data' make: *** [emulate/ether.o] Error 1 Really appreciate your help. Yehia __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com