Re: [NTG-context] metaobj problem
Shiv Shankar Dayal wrote: Hi, I was trying to run following code from its manual i.e. metaobj's manual. newCircle.a(btex A etex); newCircle.b(btex B etex); newCircle.c(btex C etex); newCircle.d(btex D etex); newCircle.e(btex E etex); verbatimtex \small etex; This verbatimtex seems to be confusing the btex ... etex replacement lua code (odd btex's and etex's remain in the MPlib input). Hans has to look into this, I don't quite understand what goes wrong. Best wishes, Taco PS Next time, please post a complete test file, not just a section. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] MKIV numbering
> > > Explicit setting of : > > > > > > \setupcaptions[way=bysection] > > > \setupformulas[way=bysection] > > > > > > works. > > > > > > Best wishes, > > > Taco > > > > > > I'm afraid this suggestion ALMOST works---it restarts the numbering in > > each new section, but it > > does not prefix the numbers with the section number, so my previous > > example gives two Figure 1's. > > \setupcaptions[way=bysection,prefixsegments=section] > \setupformulas[way=bysection,prefixsegments=section] > > Wolfgang Thanks Wolfgang, that is absolutely fantastic. I'm so happy I might just make a note of that on the wiki! Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Placing a symbol at begin of a line when indenting is on
On 18-5-2010 5:17, Vladimir Lomov wrote: \usesymbols[nav] \setupindenting[yes, medium, next] \starttext \input tufte \symbol[navigation 2][CloseDocument] \input tufte \input tufte \stoptext \atleftmargin{\symbol[navigation 2][CloseDocument]} \input tufte - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Inserting apropriate blank - indenting by \writetolist
On 18-5-2010 8:02, Jaroslav Hajtmar wrote: Hello all, When I do: \writetolist[chapter]{}{Appendicess} then content is 1. Section one 2. Section two . Appendices stopper is visible - unacceptable for me when I do: \writebetweenlist[chapter]{Appendicess} then content is 1. Section one 2. Section two Appendices without indentation - - unacceptable for me well, writebetween is just that, you can try \writebetweenlist[chapter]{\hskip3em Appendicess} (a more comples solution involves cloning chapter but i have no time for explaining that now) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Placing a symbol at begin of a line when indenting is on
** Hans Hagen [2010-05-18 09:43:54 +0200]: > On 18-5-2010 5:17, Vladimir Lomov wrote: >>\usesymbols[nav] >>\setupindenting[yes, medium, next] >>\starttext >>\input tufte >>\symbol[navigation 2][CloseDocument] >>\input tufte >>\input tufte >>\stoptext > \atleftmargin{\symbol[navigation 2][CloseDocument]} \input tufte Thank you. Works as I expected. -- Blessed is he who expects nothing, for he shall never be disappointed. -- Alexander Pope ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Sections numbering in miscellaneous parts of documents (MKIV)
Am 17.05.10 22:12, schrieb Jaroslav Hajtmar: Is there due \setupsectionblock [backpart] [before={\setupuserpagenumber[numberconversion=Romannumerals]}] \setupsectionblock [appendix] [before={\setupuserpagenumber[numberconversion=numbers] %Characters \setupheadertexts[][] \setupfootertexts[][] }] I suggest to use sectionblockenvironment for these settings, e.g. \startsectionblockenvironment[backpart] \setupusepagenumber[numberconversion=Romannumerals] \stopsectionblockenvironment possibility change of section numbering to (for. example) only numbers in all parts of documents \definestructureconversionset[numbers][][numbers] \setupheads[sectionconversionset=numbers] Wolfgang ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Sections numbering in miscellaneous parts of documents (MKIV)
Thanx Wolfgang. It is OK. Is there any possibility continue numbering from previous sections? Is there any manual or informations about this? I study contextref.pdf and I didnt any info about. Thanx Jaroslav Dne 18.5.2010 10:57, Wolfgang Schuster napsal(a): Am 17.05.10 22:12, schrieb Jaroslav Hajtmar: Is there due \setupsectionblock [backpart] [before={\setupuserpagenumber[numberconversion=Romannumerals]}] \setupsectionblock [appendix] [before={\setupuserpagenumber[numberconversion=numbers] %Characters \setupheadertexts[][] \setupfootertexts[][] }] I suggest to use sectionblockenvironment for these settings, e.g. \startsectionblockenvironment[backpart] \setupusepagenumber[numberconversion=Romannumerals] \stopsectionblockenvironment possibility change of section numbering to (for. example) only numbers in all parts of documents \definestructureconversionset[numbers][][numbers] \setupheads[sectionconversionset=numbers] Wolfgang ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Inserting apropriate blank - indenting by \writetolist
Thanx Hans, is there possibility insert by this way still pagenumber? for example: \writebetweenlist[Ikap]{\hskip2em {\bf Přílohy} \hfill\the\pagenumber } % get error Thanx Jaroslav Dne 18.5.2010 9:49, Hans Hagen napsal(a): On 18-5-2010 8:02, Jaroslav Hajtmar wrote: Hello all, When I do: \writetolist[chapter]{}{Appendicess} then content is 1. Section one 2. Section two . Appendices stopper is visible - unacceptable for me when I do: \writebetweenlist[chapter]{Appendicess} then content is 1. Section one 2. Section two Appendices without indentation - - unacceptable for me well, writebetween is just that, you can try \writebetweenlist[chapter]{\hskip3em Appendicess} (a more comples solution involves cloning chapter but i have no time for explaining that now) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Sections numbering in miscellaneous parts of documents (MKIV)
Am 18.05.10 11:56, schrieb Jaroslav Hajtmar: Thanx Wolfgang. It is OK. Is there any possibility continue numbering from previous sections? Is there any manual or informations about this? I study contextref.pdf and I didnt any info about. This seems to be not possible in MkIV because a new sectionblock resets the counters for the headers (that's what i can guess from the source) and only Hans can help here. The manual does currently not explain the new MkIV commands for numberconversion etc. and all you can do is to search in the list archive and the wiki. I made a short example for Hans where the remaining problem is to continue the header numbering in the appendix, i.e. header '1 Three' should be '3 Three' and '2 Four'should be '4 Four'. \definestructureconversionset[numbers][][numbers] \setupheads[sectionconversionset=numbers] \setupuserpagenumber[numberconversionset=numbers] \starttext \startbodymatter \chapter{One} \chapter{Two} \stopbodymatter \startappendices \chapter{Three} \chapter{Four} \stopappendices \stoptext Wolfgang ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] POV-Ray
Hi, I have needs of graphics which is very heavy and I am using metapost, metaobj and metauml. However, as you may know the problems which I have reported I think that it would be better if I use POV-Ray for images. Sure the file size is going to be blown up by a margin but I think metapost can not beat POV-Ray in terms of power. Please advice. -- Best regards, Shiv Shankar Dayal ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] POV-Ray
Shiv Shankar Dayal wrote: Hi, I have needs of graphics which is very heavy and I am using metapost, metaobj and metauml. However, as you may know the problems which I have reported I think that it would be better if I use POV-Ray for images. Sure the file size is going to be blown up by a margin but I think metapost can not beat POV-Ray in terms of power. Nor in terms of total processing time. ;) Please advice. It totally depends on the type of images you need. Best wishes, Taco ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Register interaction (page references) [mkIV]
Hi, when I place an interactive register in mkIV, and then in the PDF click the pagenumber (in the index), it takes me to the wrong page; it seems to go to the absolute pdf page number(?). Example: \setupinteraction[state=start] \startsectionblockenvironment[bodypart] \setupuserpagenumber[number=1] \stopsectionblockenvironment \starttext \startfrontmatter \page[dummy] \page[dummy] \stopfrontmatter \startbodymatter \page[dummy] bla\index{bla} \stopbodymatter \placeregister[index] \stoptext Is there something new I have to configure to make it work? MkII works as expected. Thomas ConTeXt ver: 2010.05.13 12:15 MKIV fmt: 2010.5.18 int: english/english ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] POV-Ray
On Tue, May 18, 2010 at 14:44, Shiv Shankar Dayal wrote: > Sure the file size is going to be blown > up by a margin but I think metapost can not beat POV-Ray in terms of power. > > Please advice. POV-Ray is for 3D raster images, while metapost is for 2D vector images. I often use POV-Ray to generate complex 3D surfaces and then overlay the image with metapost to add arrows, labels, ... Two two programs are hardly comparable. They are used for completely different needs. You need to tell what kind of images exactly you would want to have. Asymptote may lie somewhere between the two (less powerful than POV-Ray, but more 3D features than metapost). Mojca ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] POV-Ray
Hi, I indeed agree with Taco… but it depends on your input format, your purpose, etc. For me, the issue can't be resumed to a power comparison between povray and metapost because these tools serve differents purposes! If you want to obtain 3D realistic rendering (with raytracing), you definitely have to use povray, YafaRay and co. and embed the resulting image(s), or movies as usual (I myself never try to embed movies and consequently can't state if that's possible). Else, if you already have an existing 3D model (using 3ds, blend, lwo, … format), wanted to *embed* (not just as an image) it within your final document/pdf with *potential interactivity* and if realistic rendering is not your point you should consider using u3d or prc format and read and try to use it. Search the ML for further details. The main point here is the 3D model conversion to u3d or prc… If you start from scratch and really want to *embed* your 3D model, consider using asymptote to produce a prc file and proceed as in the previous point (see the ML for details). I have never done that. The real issue is: what's your need ? For example, on the one hand I have used u3d embedding for my PhD slides because I wanted to be able to show some details of my 3D model but doesn't want to open a heavy CAD application… On the other hand, I have used povray renderings on the very same 3D model in my PhD thesis. I have used metapost a lot for the same document, but only for 2D diagrams… Best regards, Renaud Shiv Shankar Dayal wrote: > Hi, > > I have needs of graphics which is very heavy and I am using metapost, > metaobj and > metauml. However, as you may know the problems which I have reported I > think that > it would be better if I use POV-Ray for images. Sure the file size is > going to be blown > up by a margin but I think metapost can not beat POV-Ray in terms of power. Nor in terms of total processing time. ;) > Please advice. It totally depends on the type of images you need. Best wishes, Taco ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] POV-Ray
Hi, I indeed agree with Taco… but it depends on your input format, your purpose, etc. For me, the issue can't be resumed to a power comparison between povray and metapost because these tools serve differents purposes! If you want to obtain 3D realistic rendering (with raytracing), you definitely have to use povray, YafaRay and co. and embed the resulting image(s), or movies as usual (I myself never try to embed movies and consequently can't state if that's possible). Else, if you already have an existing 3D model (using 3ds, blend, lwo, … format), wanted to *embed* (not just as an image) it within your final document/pdf with *potential interactivity* and if realistic rendering is not your point you should consider using u3d or prc format and read and try to use it. Search the ML for further details. The main point here is the 3D model conversion to u3d or prc… If you start from scratch and really want to *embed* your 3D model, consider using asymptote to produce a prc file and proceed as in the previous point (see the ML for details). I have never done that. The real issue is: what's your need ? For example, on the one hand I have used u3d embedding for my PhD slides because I wanted to be able to show some details of my 3D model but doesn't want to open a heavy CAD application… On the other hand, I have used povray renderings on the very same 3D model in my PhD thesis. I have used metapost a lot for the same document, but only for 2D diagrams… Best regards, Renaud > "Taco" == Taco Hoekwater writes: Taco> Shiv Shankar Dayal wrote: >> Hi, >> >> I have needs of graphics which is very heavy and I am using metapost, >> metaobj and metauml. However, as you may know the problems which I >> have reported I think that it would be better if I use POV-Ray for >> images. Sure the file size is going to be blown up by a margin but I >> think metapost can not beat POV-Ray in terms of power. Taco> Nor in terms of total processing time. ;) >> Please advice. Taco> It totally depends on the type of images you need. Taco> Best wishes, Taco Taco> ___ Taco> If your question is of interest to others as well, please add an Taco> entry to the Wiki! Taco> maillist : ntg-context@ntg.nl / Taco> http://www.ntg.nl/mailman/listinfo/ntg-context webpage : Taco> http://www.pragma-ade.nl / http://tex.aanhet.net archive : Taco> http://foundry.supelec.fr/projects/contextrev/ wiki : Taco> http://contextgarden.net Taco> ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___