Re[2]: [NTG-context] nath: \wall and \return doesn't work?
Saturday, October 16, 2004 Christopher Creutzig wrote: > Giuseppe Bilotta wrote: >>>I thought the \return were to go to the horizontal position of the >>>\wall, in the next line? For me, both lines are flush left. >> You are returning too soon. Lines should be ended by \\, not >> \return, unless they are the last indented line; your snipped >> should rather go: > I see -- \return is not return to the horizontal position, but > rather, \return is the end of the \wall-indented part, right? Exactly. \wall sets a "new home position" that gets obeyed by all *subsequent* lines (each of them ended by \\) until a \return is met, which "backtracks" the home position to the previous one (you can have multiple \walls). -- Giuseppe "Oblomov" Bilotta ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] pb reset table setup
Hi contexers, I got a recurrent problem with tables : the setup of the first one affect following other and different setup tables. See an exemple below : \usemodule[units] \useregime[il1] \enableregime[il1] \useencoding[ffr] \mainlanguage[fr] \setupcolors[state=start] \definecolor[Grisbleu] [r=0.91,g=0.91,b=0.93] \setupitemize[each][headstyle=\bfa] \starttext \chapter[chapreponses]{Answers} \section[]{baobab baobab baobab \quote{baobabbaobabbaobab}} \startitemize[A] \head roots \setupTABLE[row][1][style=\bfxx,frame=on,align={middle,lohi}] \setupTABLE[1][5][style=\bfx,align=middle] \setupTABLE[2][5][style=\bf,background=color,backgroundcolor=Grisbleu,align={middle,lohi}] \bTABLE[align=lohi,width=broad,style=tfxx] \bTR \bTD Condition \eTD \bTD Vérification \eTD\eTR \bTR \bTD maison non climatisée \eTD \bTD OK \eTD\eTR \bTR \bTD dont la surface habitable est inférieure à 220 m\high{2} \eTD \bTD OK \eTD\eTR \bTR \bTD dont la surface des portes et fenêtres est inférieure à 25 \% de la surface habitable \eTD \bTD OK \eTD\eTR \bTR \bTD Conclusion : \eTD \bTD OK \eTD\eTR \eTABLE \head Isolation of soils, walls and ceilings % \resetTABLE %-- NOT WORKING !!! \setupTABLE[row][1][style=\bfxx,frame=on,align={middle,lohi}] \setupTABLE[c][1][align={middle,lohi}] \setupTABLE[c][3][width=.5\textwidth] \setupTABLE[1][8][style=\bfx,align=middle] \setupTABLE[5][8][style=\bf,background=color,backgroundcolor=Grisbleu,align={middle,lohi}] \bTABLE[align=lohi,width=broad,style=tfxx] \bTR \bTD Nivel \eTD \bTD Paroi \eTD \bTD Insulation system \eTD \bTD Value {\bf R} \eTD\bTD goto page \dots \eTD\eTR \bTR \bTD [nr=3] R-1 \eTD \bTD sol \eTD \bTD floormate 200 ({\sc Isover}) ep. 60 sous dallage BA\eTD \bTD 2 \eTD \bTD 40 (cours)\eTD\eTR \bTR \bTD mur \eTD\bTD néant \eTD\bTD \eTD \bTD \eTD\eTR \bTR\bTD plafond \eTD \bTD entrevous polystyrène rectofibre ({\sc Rector}) \eTD \bTD K = 0,31 $\dashrightarrow$ R = 3,22, feu : M1\eTD \bTD 41 (ctrl)\eTD\eTR \bTR \bTD [nr=3] R+0 \eTD \bTD sol \eTD \bTD dito plafond R-1 \eTD \bTD 2 \eTD \bTD 40 (cours)\eTD\eTR \bTR \bTD mur \eTD\bTD doublage Xtherm 32 (100+13) ({\sc Knauf})\eTD\bTD 3,15\eTD \bTD 8 (ctrl)\eTD\eTR \bTR\bTD plafond \eTD \bTD Laine verre IBR monocouche ({\sc Isover}) ep. 240 \eTD \bTD 6 \eTD \bTD 40 (cours)\eTD\eTR \bTR \bTD [nc=4] Nombre de points : \eTD \bTD 5 \eTD\eTR \eTABLE \head Ponts thermiques \startitemize[n] \item Ponts thermiques entre les murs extérieurs et les planchers \item dont la surface habitable est inférieure à 220 \Square\Meter \item dont la surface des portes et fenêtres est inférieure à 25 \% de la surface habitable \stopitemize \head \head \stopitemize \stoptext ù The unwanted setup is on the second table, on the c2-r5 cell (sol). What can I do ? Thanks for your answers. Hope you understand french for better reading ! -- olivier TURLIER ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] chinese ConTeXt
On 18 Oct 04, at 1:34 PM, Lutz Haseloff wrote: Hi Hans, hi all, it seems, that the commands: \usemodule[chi-simplified] \usemodule[chi-traditional] do nothing. They are pointing to files s-chi-01.tex and s-chi-02.tex which are not present. How can i have access to the traditional chinese characters? Greetings Lutz ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context I use the command \usemodule[chinese] when using chinese and use the commands \TraChi and \SimChi to switch between traditional and simplified chinese characters. Francis Leung ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
RE: [NTG-context] m-bib module
> Sorry, I forgot to migrate my alpha bib module when the context alpha > became the 'current distribution'. My latest module is/was still here: > > http://tex.aanhet.net/bib/alpha/ > > I will fix the website a.s.a.p. Many thanks ! Fabrice ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] m-bib module
Hi Fabrice, Sorry, I forgot to migrate my alpha bib module when the context alpha became the 'current distribution'. My latest module is/was still here: http://tex.aanhet.net/bib/alpha/ I will fix the website a.s.a.p. On Mon, 18 Oct 2004 13:40:34 +0200, Fabrice wrote: > I guess the new module is the one using t-bib.tex and t-list.tex. > -- groeten, Taco ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
RE: [NTG-context] m-bib module
> this is related to the low level interface that is now english, so, one > needs the latest bib module > >http://tex.aanhet.net/bib/ > Unfortunately, I'm already using it. So either the real new one is hidden somewhere else or there is still a problem. system : macros of module bib loaded (c:\Documents and Settings\popineau\My Documents/texmf/tex/context/bib/t-bib.tex ! Undefined control sequence. l.332 \definieerlijst [pubs][pubs] ? system : macros of module list loaded (c:\Documents and Settings\popineau\My Documents/texmf/tex/context/bib/t-list.tex) ! Undefined control sequence. \c!nummercommando =\bibleftnumber I guess the new module is the one using t-bib.tex and t-list.tex. Fabrice ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] backgrounds
gmorais wrote: I made this background to the first page of a document: \setupcolors[state=start] \startuseMPgraphic{page} StartPage ; pickup pencircle scaled 2pt ; fill Field[InnerMargin][Top] enlarged (0,2.5cm) withcolor .625blue ; fill Field[InnerMargin][Text]withcolor .6white ; fill Field[InnerMargin][Header] withcolor .625blue ; fill Field[Text][Text] enlarged .5cm withcolor white ; fill Field[Header][Text] enlarged (.5cm,0) withcolor white ; fill Field[Top][Text]enlarged (.5cm,4cm) withcolor white ; StopPage ; \stopuseMPgraphic \defineoverlay[page][\useMPgraphic{page}] \setupbackgrounds[page][background=page] \startreuseMPgraphic \reuseMPgraphic - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] m-bib module
Fabrice Popineau wrote: I get an error recently with the m-bib module, probably due to some misuse of it: (c:\Documents and Settings\popineau\My Documents/texmf/tex/context/bib/t-bib.tex ! Undefined control sequence. l.332 \definieerlijst [pubs][pubs] ? system : macros of module list loaded (c:\Documents and Settings\popineau\My Documents/texmf/tex/context/bib/t-list.tex) ! Undefined control sequence. \c!nummercommando =\bibleftnumber \xprocesscommaitem #1,#2->\if ,#1 ,[EMAIL PROTECTED] \xprocesscommaitem \else \if [EMAIL PROTECTED] ...mmando =\bibleftnumber , \c!variant =,\c!variant =apa \xdogetparameters #1]->\xprocesscommaitem #1 ,],[EMAIL PROTECTED]@ \dosetuppublications ...tnumber , \c!variant =,#1] \doifsomething {\@@pbvaria... l.1215[\c!variant=apa] ? Any clue how to fix this ? this is related to the low level interface that is now english, so, one needs the latest bib module http://tex.aanhet.net/bib/ Sorry for the inconvenience Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
RE: [NTG-context] m-bib module
I get an error recently with the m-bib module, probably due to some misuse of it: (c:\Documents and Settings\popineau\My Documents/texmf/tex/context/bib/t-bib.tex ! Undefined control sequence. l.332 \definieerlijst [pubs][pubs] ? system : macros of module list loaded (c:\Documents and Settings\popineau\My Documents/texmf/tex/context/bib/t-list.tex) ! Undefined control sequence. \c!nummercommando =\bibleftnumber \xprocesscommaitem #1,#2->\if ,#1 ,[EMAIL PROTECTED] \xprocesscommaitem \else \if [EMAIL PROTECTED] ...mmando =\bibleftnumber , \c!variant =,\c!variant =apa \xdogetparameters #1]->\xprocesscommaitem #1 ,],[EMAIL PROTECTED]@ \dosetuppublications ...tnumber , \c!variant =,#1] \doifsomething {\@@pbvaria... l.1215[\c!variant=apa] ? Any clue how to fix this ? Thanks in advance, Fabrice ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] backgrounds
I made this background to the first page of a document: \setupcolors[state=start] \startuseMPgraphic{page} StartPage ; pickup pencircle scaled 2pt ; fill Field[InnerMargin][Top] enlarged (0,2.5cm) withcolor .625blue ; fill Field[InnerMargin][Text]withcolor .6white ; fill Field[InnerMargin][Header] withcolor .625blue ; fill Field[Text][Text] enlarged .5cm withcolor white ; fill Field[Header][Text] enlarged (.5cm,0) withcolor white ; fill Field[Top][Text]enlarged (.5cm,4cm) withcolor white ; StopPage ; \stopuseMPgraphic \defineoverlay[page][\useMPgraphic{page}] \setupbackgrounds[page][background=page] What do I have to do for this background appears only in the first page (and all the others a simple white page)? Thanks in advance gonçalo ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] nath: \wall and \return doesn't work?
Giuseppe Bilotta wrote: I thought the \return were to go to the horizontal position of the \wall, in the next line? For me, both lines are flush left. You are returning too soon. Lines should be ended by \\, not \return, unless they are the last indented line; your snipped should rather go: I see -- \return is not “return to the horizontal position,” but rather, \return is the end of the \wall-indented part, right? merci, Christopher ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Miktex blues
David Arnold wrote: F:\miktex\scripts\context\perl>perl texexec.pl junk TeXExec 5.0 - ConTeXt / PRAGMA ADE 1997-2004 executable : pdfetex format : f:/localtexmf/miktex/fmt/cont-en inputfile : junk output : standard interface : en current mode : none TeX run : 1 This is pdfeTeX, Version 3.141592-1.10b-2.1 (MiKTeX 2.3) initexmf: don't know how to dump miktex cannot make f:/localtexmf/miktex.efmt I can't find the default format file! return code : 256 run time : 1 seconds total run time : 1 seconds How's that for weird? What happens when you run texexec --make --alone do you get *.fmt and *.mem files? these need to be present on or moved to the right location (watch out, pdfetex no longer has efmt as suffix) One way to figure out what files are present is to use textools --find cont-en.fmt this is a ruby script, so you need to have ruby installed i'm a bit puzzled why you can't get it working since you had it working some time ago; there have been no changes in texexec cum suis that influence that, so the main problem is probably in the tds change as well as the change in suffix (efmt -> fmt) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Installation Problem
Larry Stamm wrote: I got a similar error message on my linux box. The solution was to replace a single occurrence of the instruction "\c!gebied" in texexec.pl with "\c!directory". I suspect this is an errant piece of Dutch language code that escaped the recent tranlation to low-level English. hm, no c!gebied on my machine; of course the new location in TDS can make that in distributions that have updated build scripts accordingly old scripts may be used instead of new ones; Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Installation Problem
David Arnold wrote: Added map +context.map to pdftex.cfg. take a look at the file cont-sys.rme: you can configure auto map loading; the pdftex.cbf file is gone in the latest pdfetex! Got this error: \c!gebied can you do a c: cd \ dir c:\texexec.pl /s and see what texexec's are reported? C:\temp> texexec junk and wind up at F:\temp> weird, i remember a post on this, can you try texmfstart texexec.pl ... i can send you a texmfstart.exe if needed Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Re: Installation Problem
David Arnold wrote: Patrick, Ah! I am looking in cont-tmf.zip and I see that there no longer is a /context/perltk. oeps, i need to fix that; the problem is that we're in a transition from old TDS to new TDS (tex directory structure), so either manuals are behind or ahead (and since some changes are not downward compatible this poses some timing) Looks like the installation directions haven't caught up with the release. indeed; i'll start doing that once i have the new web site up and running (i'm still reorganizing some things) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] runperl.zip
David Arnold wrote: There is no runperl.zip in the latest distribution. Can someone send me a copy? you can use texmfstart for that instead; texmfstart --make --windows --indirect texexec.pl will create a batch file that you can move to your bin path Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context