Re: [NTG-context] installer
Same here but invoking the command from the the directory context/tex works well! Günter Floris van Manen via ntg-context @ 2023-05-07 21:20 +02: On 07/05/2023 19:47, Henning Hraban Ramm via ntg-context wrote: I updated https://wiki.contextgarden.net/Modules (also deleted a lot of outdated information; module lists still need work) mtxrun --script install-modules --install --all this generates an error: resolvers | globbing | confusing filename, name: 'CHANGELOG', lower: 'changelog', already: 'ChangeLog' mtx-install-modules | unknown subdirectory 'texmf-context' ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___
Re: [NTG-context] Spacing problem around decimal point
Hi,
I can confirm that the x64_64-linux from
https://dl.contextgarden.net/build/luametatex/work/
version works correctly. So, no excess spaces around the
decimal points at all.
HTH
Günter
Hans Hagen via ntg-context @ 2023-03-26 13:22 +02:
On 3/26/2023 4:20 AM, Gavin via ntg-context wrote:
Hi List,
I’m getting strange spaces around some decimal points after a
clean LMTX
install. MWE:
\starttext
\startformula
v = \frac{1.32}{1.41} = 0.935
\stopformula
\stoptext
This produces the result attached below. The 1.32 looks fine,
but the next two
numbers have excess space around the decimal point. Adding the
line
\showmakeup[mathglue] %\mathspacingmode=1
to the preamble reveals that the second and third decimal
points are being
treated as binary operators. It’s very strang. Are others
getting this?
can you pick up a binary from:
https://dl.contextgarden.net/build/luametatex/work/
and test it?
Hans
-
Hans Hagen | PRAGMA
ADE
Ridderstraat 27 | 8061 GH Hasselt | The
Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl |
www.pragma-pod.nl
-
___
If your question is of interest to others as well, please add an
entry to the Wiki!
maillist : ntg-context@ntg.nl /
https://www.ntg.nl/mailman/listinfo/ntg-context
webpage : https://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : https://contextgarden.net
___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context
webpage : https://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : https://contextgarden.net
___
Re: [NTG-context] issue with two recently added PDF manuals
Same here! ❯ qpdfview onandon.pdf documents/general/manuals "Error: Couldn't find trailer dictionary" "Error: Couldn't find trailer dictionary" "Error: Couldn't read xref table" ❯ ❯ qpdfview columnsets.pdf documents/general/manuals "Error (4194333): Illegal character '}'" "Error (4194339): Illegal character '>'" "Error (4194333): Illegal character '}'" "Error (4194339): Illegal character '>'" "Error: Kid object (page 38) is wrong type (null)" "Error (4194333): Illegal character '}'" "Error (4194339): Illegal character '>'" "Error: Kid object (page 38) is wrong type (null)" "Error (4194333): Illegal character '}'" "Error (4194339): Illegal character '>'" "Error: Kid object (page 38) is wrong type (null)" "Error (4194333): Illegal character '}'" "Error (4194339): Illegal character '>'" "Error: Kid object (page 38) is wrong type (null)" "Error (4194333): Illegal character '}'" "Error (4194339): Illegal character '>'" "Error: Kid object (page 38) is wrong type (null)" No page 43 was found in document at "columnsets.pdf" ❯ Pablo Rodriguez via ntg-context @ 2022-05-15 10:36 +02: Dear list, I’m experiencing issues to open the following documents added in one of the recent latests. Now I’m on Linux 64bit with current latest (2022.05.11 11:36) and mupdf-gl-1.20.0.rc1. $ mupdf-gl onandon.pdf error: cannot find startxref warning: trying to repair broken xref warning: repairing PDF document warning: object missing 'endobj' token error: cannot find page tree $ mupdf-gl columnsets.pdf error: expected object number warning: repairing PDF document error: object is not a stream warning: cannot load object (730 0 R) into cache error: cannot find XObject resource 'Im92' error: cannot find XObject resource 'Im93' error: cannot find XObject resource 'Im94' error: cannot find XObject resource 'Im95' error: cannot find XObject resource 'Im92' error: cannot find XObject resource 'Im93' error: cannot find XObject resource 'Im94' error: cannot find XObject resource 'Im95' warning: non-page object in page tree () warning: ... repeated 11 times... warning: content stream is not a stream (1045 0 R) warning: ... repeated 2 times... warning: non-page object in page tree () warning: ... repeated 2 times... warning: content stream is not a stream (1048 0 R) warning: ... repeated 2 times... warning: non-page object in page tree () warning: ... repeated 2 times... warning: content stream is not a stream (1055 0 R) warning: ... repeated 2 times... warning: non-page object in page tree () warning: ... repeated 6 times... Latest Acrobat Reader DC in Windows isn’t able to open onandon.pdf and it has problems to display all contents from columnsets.pdf. Would anyone be so kind to confirm the issue? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___
Re: [NTG-context] List of publications...
I'm able to confirm that ❯ context --version mtx-context | ConTeXt Process Management 1.04 mtx-context | mtx-context | main context file: mtx-context | current version: 2022.05.10 18:44 mtx-context | main context file: mtx-context | current version: 2022.05.10 18:44 results in exactly the same output. Günter Willi Egger via ntg-context @ 2022-05-11 10:54 +02: Good morning! I ws trying to finish my list of publications. How ever I now get a very strange list. Could someone compile the attached tex-sample-file and see? I have ConTeXt ver: 2022.04.20 19:18 LMTX fmt: 2022.4.22 Thanks Willi [3. application/octet-stream; publist-test.bbl]... [5. application/pdf; publist-test.pdf]... [7. application/x-tex; publist-test.tex]... ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___
Re: [NTG-context] Font too small with a macro
Hi,
I see... Thanx, also for the reference to \definemathcommand!
Best,
Günter
Mikael Sundqvist via ntg-context @ 2022-04-23 17:12 +02:
Hi,
be careful with spacing. Try
\protected\def\Exp{\normal exp}
\startformula
\exp x = \Exp x.
\stopformula
If you need more math functions, you can try (here for arsinh):
\definemathcommand[arsinh][nolop]{\mfunction{arsinh}}
Best, Mikael
On Sat, Apr 23, 2022 at 5:03 PM Günter Kolousek via ntg-context
wrote:
Hi,
if I replace your definition of exp by
\protected\def\exp{\normal exp}
it works well (at least on my installation of lmtx), but
I'm just a beginner in using context...
Best,
Günter
Mikael Sundqvist via ntg-context @ 2022-04-23 15:27 +02:
> On Sat, Apr 23, 2022 at 12:11 PM Fabrice Couvreur via
> ntg-context
> wrote:
>>
>> Hello,
>> If I compile with context the expected result is correct but
>> with lmtx the font under the square root is smaller.
>> Thank you
>> Fabrice
>>
>> \protected\def\exp{\text{\normal exp}}
>>
>> \starttext
>> \startformula
>>\sqrt{\exp(x)}=\exp\left(\frac{x}{2}\right).
>> \stopformula
>> \stoptext
>
> Hi,
>
> without your redefinition of \exp it looks fine (exp is
> already
> defined). Does that solve your problem, or are you doing
> something
> else, and this exp was just an example?
>
> Best, Mikael
>
___
> If your question is of interest to others as well, please add
> an
> entry to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl /
> http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
>
___
___
If your question is of interest to others as well, please add
an entry to the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
___
If your question is of interest to others as well, please add an
entry to the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
Re: [NTG-context] Font too small with a macro
Hi,
if I replace your definition of exp by
\protected\def\exp{\normal exp}
it works well (at least on my installation of lmtx), but
I'm just a beginner in using context...
Best,
Günter
Mikael Sundqvist via ntg-context @ 2022-04-23 15:27 +02:
On Sat, Apr 23, 2022 at 12:11 PM Fabrice Couvreur via
ntg-context
wrote:
Hello,
If I compile with context the expected result is correct but
with lmtx the font under the square root is smaller.
Thank you
Fabrice
\protected\def\exp{\text{\normal exp}}
\starttext
\startformula
\sqrt{\exp(x)}=\exp\left(\frac{x}{2}\right).
\stopformula
\stoptext
Hi,
without your redefinition of \exp it looks fine (exp is already
defined). Does that solve your problem, or are you doing
something
else, and this exp was just an example?
Best, Mikael
___
If your question is of interest to others as well, please add an
entry to the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
Re: [NTG-context] Bug with vimtyping: no line numbers
It works with this workaround. Thanx for the help!
Regards
Günter
Am Wed, 13 Aug 2014 10:39:46 -0400 (EDT)
schrieb Aditya Mahajan adit...@umich.edu:
On Mon, 11 Aug 2014, Günter Kolousek wrote:
I think there is a bug in the (latest) beta that was not there
earlier this year. In particular, it worked (and still works) in
the version
current version: 2014.03.19 23:11
but it show *no* line numbers at all in the (latest) beta:
current version: 2014.07.30 10:31
A minimal example follows:
\usemodule[vim]
\setupvimtyping[%
numbering=yes,%
numberdistance=2em]
\definevimtyping[cpp][syntax=cpp]
\starttext
\startcpp
#include iostream
int main() {
std::cout Hello, world! std::endl;
}
\stopcpp
\stoptext
Sadly, I'm not a ConTeXt nor a lua expert so maybe anybody can help?
A quick work around is to add
numberlocation=left
in your setup. For example:
\usemodule[vim]
\setupvimtyping
[
numbering=yes,
numberdistance=1em,
numberlocation=left,
]
\definevimtyping[cpp][syntax=cpp]
\starttext
\startcpp
#include iostream
int main() {
std::cout Hello, world! std::endl;
}
\stopcpp
\stoptext
numberlocation=left is the default anyways, so I don't know why the
bug occurs.
Aditya
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] Bug with vimtyping: no line numbers
I think there is a bug in the (latest) beta that was not there earlier
this year. In particular, it worked (and still works) in the version
current version: 2014.03.19 23:11
but it show *no* line numbers at all in the (latest) beta:
current version: 2014.07.30 10:31
A minimal example follows:
\usemodule[vim]
\setupvimtyping[%
numbering=yes,%
numberdistance=2em]
\definevimtyping[cpp][syntax=cpp]
\starttext
\startcpp
#include iostream
int main() {
std::cout Hello, world! std::endl;
}
\stopcpp
\stoptext
Sadly, I'm not a ConTeXt nor a lua expert so maybe anybody can help?
Regards,
Günter
p.s.: BTW, I still could not resolve the bug with integrating tikz but I
verified that it works with the stated version above (2014.03.19 23:11)
on my system (nothing else changed).
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] Bug with vimtyping: no line numbers
Hi, this works with the latest beta! Günter Am Tue, 12 Aug 2014 11:36:00 -0400 (EDT) schrieb Aditya Mahajan adit...@umich.edu: Hi, On Mon, 11 Aug 2014, Günter Kolousek wrote: I think there is a bug in the (latest) beta that was not there earlier this year. In particular, it worked (and still works) in the version current version: 2014.03.19 23:11 but it show *no* line numbers at all in the (latest) beta: I do not have access to a computer that has the latest context right now. I'll look into it when I get a chance. In the meantime, can you check if \starttext \startlinenumbering \input knuth \stoplinenumbering \stoptext numbers the lines. Aditya ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Bug with vimtyping: no line numbers
I think there is a bug in the (latest) beta that was not there earlier
this year. In particular, it worked (and still works) in the version
current version: 2014.03.19 23:11
but it show *no* line numbers at all in the (latest) beta:
current version: 2014.07.30 10:31
A minimal example follows:
\usemodule[vim]
\setupvimtyping[%
numbering=yes,%
numberdistance=2em]
\definevimtyping[cpp][syntax=cpp]
\starttext
\startcpp
#include iostream
int main() {
std::cout Hello, world! std::endl;
}
\stopcpp
\stoptext
Sadly, I'm not a ConTeXt nor a lua expert so maybe anybody can help?
Regards,
Günter
p.s.: BTW, I still could not resolve the bug with integrating tikz but I
verified that it works with the stated version above (2014.03.19 23:11)
on my system (nothing else changed).
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] Bug with the integration with tikz
Hi OK,
thanks for your prompt reply.
I just updated to
2014.07.30 10:31 MKIV beta fmt: 2014.8.3 int: english/english
but I get the same error message as before. It worked in the spring
this year. Do you have a hint where can I search for?
Maybe I should be a little bit more concrete. Yes, I get the expected
results but also the cited error messages which I have to confirm.
Any ideas?
Best regards
Günter
Am Sun, 3 Aug 2014 20:09:02 +0200
schrieb Otared Kavian ota...@gmail.com:
Hi Günter,
Your minimal example gives the expected result with with the latest
mkiv (ConTeXt ver: 2014.07.25 12:57 MKIV beta fmt: 2014.7.25 int:
english/english), as well with the stable version included in TeXLive
2014.
Best regards: OK
On 02 Aug 2014, at 17:05, Günter Kolousek
guenter.kolou...@gmail.com wrote:
A minimal example is:
\usemodule[tikz]
\usetikzlibrary[graphs]
\usetikzlibrary[graphdrawing]
\starttext
\starttikzpicture
\graph { a - {b, c} - d };
\stoptikzpicture
\stoptext
Günter
___
If your question is of interest to others as well, please add an
entry to the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context webpage :
http://www.pragma-ade.nl / http://tex.aanhet.net archive :
http://foundry.supelec.fr/projects/contextrev/ wiki :
http://contextgarden.net
___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] Bug with the integration with tikz
I think there is a bug in the (latest) beta (2014.07.30 10:31 MKIV beta
fmt: 2014.8.2 int: english/english) that was *not* there earlier
this year!
Please, could somebody help and maybe provide a tip for a workaround?
It concerns the integration with tikz where I get now the following
error message:
util-lib.lua:246: module 'pgf.gd.control' not found:
no field package.preload['pgf.gd.control']
no file '/usr/local/share/lua/5.2/pgf/gd/control.lua'
no file '/usr/local/share/lua/5.2/pgf/gd/control/init.lua'
no file '/usr/local/lib/lua/5.2/pgf/gd/control.lua'
no file '/usr/local/lib/lua/5.2/pgf/gd/control/init.lua'
no file './pgf/gd/control.lua'
no file '/usr/local/lib/lua/5.2/pgf/gd/control.so'
no file '/usr/local/lib/lua/5.2/loadall.so'
no file './pgf/gd/control.so'
no file '/usr/local/lib/lua/5.2/pgf.so'
no file '/usr/local/lib/lua/5.2/loadall.so'
no file './pgf.so'
stack traceback:
[C]: in function 'savedrequire'
.../context/tex/texmf-context/tex/context/base/util-lib.lua:246:
in function
'require' ...neric/pgf/graphdrawing/lua/pgf/gd/control/Sublayouts.lua:41:
in main chunk [C]: in function
'savedrequire' .../context/tex/texmf-context/tex/context/base/util-lib.lua:246:
in function
'require' ...graphdrawing/lua/pgf/gd/interface/InterfaceToDisplay.lua:45:
in main chunk [C]: in function
'savedrequire' .../context/tex/texmf-context/tex/context/base/util-lib.lua:246:
in function 'require' [\directlua]:1: in main chunk
1101 }
1102 }
1103
1104
1105 %
1106 % Ok, fire up the system by creating the binding!
1107 %
1108 \directlua{
1109 require 'pgf.gd.interface.InterfaceToDisplay'
1110 pgf.gd.interface.InterfaceToDisplay.bind(require
'pgf.gd.bindings.BindingToPGF') }
A minimal example is:
\usemodule[tikz]
\usetikzlibrary[graphs]
\usetikzlibrary[graphdrawing]
\starttext
\starttikzpicture
\graph { a - {b, c} - d };
\stoptikzpicture
\stoptext
Günter
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
