Re: [NTG-context] Arabic-utf-8 (plus a sample)
On Sat, 5 Jun 2004, Idris Samawi Hamid wrote: Hi gang, For Arabic we use a Latin transcription in Aleph/(e-)Omega (or even ArabTeX) unless one of the encoding filters like utf-8 is used. Even for utf-8 files, however, it would be very useful to be able to convert a utf-8 file to Latin transcription for further processing by Aleph/(e-)Omega. For example, adding diacritics is much easier to do in Latin than in an Arabic script editor because Latin transcription is one-dimensional and adding diacritics to Arabic is a 2-dimen affair. The best thing would be a perl script but I don't know perl at all (except to run some some precreated scripts). If someone out of the kindness of their heart could write a short and simple script for just seven characters I could do the rest myself and present it back here. Can you use (or extend) GNU recode? It does include support for utf-8 and several TeX encodings. From the manual: "It is easy for a programmer to add a new charset to `recode'. All it requires is making a few functions kept in a single `.c' file, adjusting `Makefile.am' and remaking `recode'." -- George N. White III <[EMAIL PROTECTED]> Head of St. Margarets Bay, Nova Scotia, Canada ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: Re[4]: [NTG-context] Arabic-utf-8 (plus a sample)
On Sat, 05 Jun 2004 18:19:22 -0600, Idris Samawi Hamid <[EMAIL PROTECTED]> wrote: One question: The hex for e.g. alif is 0627; how did you get D8A7 from that for purposes of the script (so I can follow along for the rest)? Ok, I found it: If you want to add more conversions, open your unicode file in an hex editor and check the actual byte-per-byte hex value of the utf text for the other characters you want to add. This should be enough for your needs. I just downloaded XVI32. Hmm... never heard of or needed a hex editor before now... Best Idris -- Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523 ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: Re[4]: [NTG-context] Arabic-utf-8 (plus a sample)
On Sun, 6 Jun 2004 01:58:44 +0200, Giuseppe Bilotta <[EMAIL PROTECTED]>
wrote:
==
#!/usr/bin/perl
use strict;
use warnings;
open(NEW,">new.tex"); #opens file to print out the result
while (<>) { #this opens the file for reading
$_ =~ s/\xD8\xA7/A/g; #this is the actual conversion
$_ =~ s/\xD8\xA8/b/g; #this is the actual conversion
$_ =~ s/\xD8\xAC/j/g; #this is the actual conversion
$_ =~ s/\xD8\xAF/d/g; #this is the actual conversion
$_ =~ s/\xD9\x87/h/g; #this is the actual conversion
$_ =~ s/\xD9\x88/w/g; #this is the actual conversion
$_ =~ s/\xD8\xB2/z/g; #this is the actual conversion
print NEW "$_"; #and this writes the result into file "new.tex"
}
close(NEW);
===
It works! I'll try to finish a basic script that works for Lagally's
ArabTeX transcription (that I use) and post it here and on the aleph list.
One question: The hex for e.g. alif is 0627; how did you get D8A7 from
that for purposes of the script (so I can follow along for the rest)?
Best
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
Re:[NTG-context] Arabic-utf-8 (plus a sample)
On Sun, 6 Jun 2004 11:08:46 +1200, Richard MAHONEY <[EMAIL PROTECTED]> wrote: You might like to look at some of the encoding conversion scripts at: http://homepages.comnet.co.nz/~r-mahoney/scripts/scripts.html N.B. For sorting utf-8 Arabic you might find the perl module `Sort::ArbBiLex' useful Thnx Richard; most of the scripts are beyond my capability;->, but the UTF8 to TeX / LaTeX scripts seem very useful for a possible transliteration module, which is something else I need to do for my journal, where people send in different transliteration conventions that I have to convert to the journal's convention. I'm ashamed to say it; I've been doing this kind of thing manually up to now; \startsuperhero must... learn... scripting... language... \stopsuperhero Thnx Idris -- Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523 ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re[4]: [NTG-context] Arabic-utf-8 (plus a sample)
Sunday, June 6, 2004 Idris Samawi Hamid wrote:
> Hi Giuseppe (Is it not way past your bedtime;->),
Yes it is, and it shows. But since I'm up and not having any
particular urge to go to bed in this very moment, here's a
tested alternative that works here:
==
#!/usr/bin/perl
use strict;
use warnings;
open(NEW,">new.tex"); #opens file to print out the result
while (<>) { #this opens the file for reading
$_ =~ s/\xD8\xA7/A/g; #this is the actual conversion
$_ =~ s/\xD8\xA8/b/g; #this is the actual conversion
$_ =~ s/\xD8\xAC/j/g; #this is the actual conversion
$_ =~ s/\xD8\xAF/d/g; #this is the actual conversion
$_ =~ s/\xD9\x87/h/g; #this is the actual conversion
$_ =~ s/\xD9\x88/w/g; #this is the actual conversion
$_ =~ s/\xD8\xB2/z/g; #this is the actual conversion
print NEW "$_"; #and this writes the result into file "new.tex"
}
close(NEW);
===
to be used as
utf2tex filename
If you want to add more conversions, open your unicode file in
an hex editor and check the actual byte-per-byte hex value of
the utf text for the other characters you want to add. This
should be enough for your needs.
--
Giuseppe "Oblomov" Bilotta
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: Re[2]: [NTG-context] Arabic-utf-8 (plus a sample)
On Sun, 6 Jun 2004 01:15:56 +0200, Giuseppe Bilotta <[EMAIL PROTECTED]>
wrote:
My take: try the following (should work even with ActiveState
5.6)
===
#!/usr/bin/perl
use strict;
#D comment the following, I think we can do without
# use open ':utf8';
open(NEW,">new.tex"); #opens file to print out the result
while (<>); { #this opens the file for reading
$_ =~ s/\x06\x27/A/esg; #this is the actual conversion
print NEW "$_"; #and this writes the result into file "new.tex"
}
close(NEW);
===
Hi Giuseppe (Is it not way past your bedtime;->),
Here's my result:
perl utf2tex2.pl < unicode-utf.txt
syntax error at utf2tex2.pl line 9, near ");"
Bareword "A" not allowed while "strict subs" in use at utf2tex2.pl line 11.
Execution of utf2tex2.pl aborted due to compilation errors.
please advise;->
best
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
Re[2]: [NTG-context] Arabic-utf-8 (plus a sample)
Sunday, June 6, 2004 Idris Samawi Hamid wrote:
> Here is the whole file once again:
> ==
> #!/usr/bin/perl -w
> use strict;
> use open ':utf8';
> open(NEW,">new.tex"); #opens file to print out the result
> while (<>); { #this opens the file for reading
> $_ =~ s/\x{0627}/\x{0041}/esg;
> #this is the actual conversion
> print NEW "$_";
> #and this writes the result into file "new.tex"
> }
> close(NEW);
> ==
My take: try the following (should work even with ActiveState
5.6)
===
#!/usr/bin/perl
use strict;
#D comment the following, I think we can do without
# use open ':utf8';
open(NEW,">new.tex"); #opens file to print out the result
while (<>); { #this opens the file for reading
$_ =~ s/\x06\x27/A/esg; #this is the actual conversion
print NEW "$_"; #and this writes the result into file "new.tex"
}
close(NEW);
===
Save as e.g. idris_conv.pl and issue as
perl idris_conv.pl < filename.txt
where filename.txt is the filename to convert.
--
Giuseppe "Oblomov" Bilotta
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [SPAM: 3.411] [NTG-context] Arabic-utf-8 (plus a sample)
On Sat, Jun 05, 2004 at 01:32:35PM -0600, Idris Samawi Hamid wrote: > Hi gang, > > For Arabic we use a Latin transcription in Aleph/(e-)Omega (or even > ArabTeX) unless one of the encoding filters like utf-8 is used. Even for > utf-8 files, however, it would be very useful to be able to convert a > utf-8 file to Latin transcription for further processing by > Aleph/(e-)Omega. For example, adding diacritics is much easier to do in > Latin than in an Arabic script editor because Latin transcription is > one-dimensional and adding diacritics to Arabic is a 2-dimen affair. > > The best thing would be a perl script but I don't know perl at all (except > to run some some precreated scripts). If someone out of the kindness of > their heart could write a short and simple script for just seven > characters I could do the rest myself and present it back here. You might like to look at some of the encoding conversion scripts at: http://homepages.comnet.co.nz/~r-mahoney/scripts/scripts.html N.B. For sorting utf-8 Arabic you might find the perl module `Sort::ArbBiLex' useful Best regards, Richard Mahoney -- Richard MAHONEY | internet: homepages.comnet.net.nz/~r-mahoney Littledene | telephone / telefax (man.): ++64 3 312 1699 Bay Road| cellular: ++64 25 829 986 OXFORD, NZ | e-mail: r.mahoney[use"@"]comnet.net.nz ___ ntg-context mailing list [EMAIL PROTECTED] http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Arabic-utf-8 (plus a sample)
On Sat, 05 Jun 2004 23:48:18 +0200, Thomas A. Schmitz
<[EMAIL PROTECTED]> wrote:
Just a quick reply (it's bedtime over here): there may be 2 problems.
Ok, get some sleep;-) Anyhow, I fixed the line break (is the space between
tilda and `s' correct?)
==
$_ =~ s/\x{0627}/\x{0041}/esg;
#this is the actual conversion
==
did not work though:-(
My perl version is v5.6.1; I went to the ActivePerl
website and the only version they had is
v5.6.1.638; so from perl.org I found Indigoperl and switched;-)
This solves part of the problem:-) Now I get
perl utf2tex.pl unicode-utf.txt
syntax error at utf2tex.pl line 8, near ");"
Execution of utf2tex.pl aborted due to compilation errors.
line 8 is
while (<>); { #this opens the file for reading
Here is the whole file once again:
==
#!/usr/bin/perl -w
use strict;
use open ':utf8';
open(NEW,">new.tex"); #opens file to print out the result
while (<>); { #this opens the file for reading
$_ =~ s/\x{0627}/\x{0041}/esg;
#this is the actual conversion
print NEW "$_";
#and this writes the result into file "new.tex"
}
close(NEW);
==
the usage is right (I'm not a windows person,
If WinEdt (and some other things) worked under WINE, I would not be a
windows person either:-(
And will attempt yet another switch (I've lost count) to Linux-KDE
sometime this Summer...
Thnx a million
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Arabic-utf-8 (plus a sample)
Just a quick reply (it's bedtime over here): there may be 2 problems. 1
is that the mail program put in an unwanted linebreak after the =~
part, just remove it; it should all be one line. And then: you'll need a
fairly recent version of perl for it to work, what do you get when you
do
perl --version
I guess for utf to work, it should be at least 5.8.0. Your basic idea of
the usage is right (I'm not a windows person, but I assume it should be
the same): save the scipt as utf2tex.pl, make it executable and call it
as utf2tex.pl FILENAME.txt.
I guess it would be easiest to convert the utf to ascii directly - that
would mean you could later convert it back. I have a set of scripts that
do just that -- convert babel Greek into utf-8 and back.
If you need more help, I'll look into it tomorrow!
Best
Thomas
On Sat, 2004-06-05 at 23:33, Idris Samawi Hamid wrote:
> On Sat, 05 Jun 2004 22:41:39 +0200, Thomas A. Schmitz
> <[EMAIL PROTECTED]> wrote:
>
> > Idris,
> >
> > I know a bit of perl and would love to help. However, I fear that
> > sending us your stuff via mail will be a bit difficult because the utf-8
> > chracters get transformed into gibberish.
>
> Thnx 4 such a speedy reply! I don't think you are getting gibberish
> though; you should be getting the extended ascii representation. So the
> letter alif (hex 0627) should look like this:
>
> ÃÂ
>
> Do you get a forward-slashed circle and a section symbol? If so, that's
> the ascii representation I'm trying to convert to the letter `A'.
>
> Here are the codes you want:
>
> ÃÂ [0627] => A
>
> ÃÂ [0628] => b
>
> ÃÂ [062C] => j
>
> ÃÂ [062F] => d
>
> Ãâ [0647] => h
>
> ÃË [0648] => w
>
> ÃÂ [0632] => z
>
> Let me explain my situation more clearly:-)
>
> I have a unicode editor, Unitype Global Writer. I save a unicode document
> as a utf *.txt file. When I open that saved file in my TeX editor
> (WinEdt), it comes out as extended ascii (that's the "gibberish"). So what
> I wanted to do was convert the ascii "gibberish" to my Latin
> transcription. It seems that what you are suggesting is to use the hex
> representation and convert the unicode txt file into a Latin transcription
> file directly and bypass the gibberish.
>
> On your perl file, can you give me an example of how to use it? I tried
> (in windows, with name
> utf2tex.pl and unicode text in unicode-utf.txt) and get
>
> =
> > perl utf2tex.pl unicode-utf.txt
> Unknown discipline class ':utf8' at C:/Perl/lib/open.pm line 18.
> BEGIN failed--compilation aborted at utf2tex.pl line 4.
> =
>
> from your script I tried, e.g.
>
>
> $_ =~
> s/\x{0627}/\x{0041}/esg;
> # from alif to `A'
>
>
> Your guidance will be greatly appreciated!
>
> Thnx a million!
> Idris
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Arabic-utf-8 (plus a sample)
On Sat, 05 Jun 2004 22:41:39 +0200, Thomas A. Schmitz
<[EMAIL PROTECTED]> wrote:
Idris,
I know a bit of perl and would love to help. However, I fear that
sending us your stuff via mail will be a bit difficult because the utf-8
chracters get transformed into gibberish.
Thnx 4 such a speedy reply! I don't think you are getting gibberish
though; you should be getting the extended ascii representation. So the
letter alif (hex 0627) should look like this:
ÃÂ
Do you get a forward-slashed circle and a section symbol? If so, that's
the ascii representation I'm trying to convert to the letter `A'.
Here are the codes you want:
ÃÂ [0627] => A
ÃÂ [0628] => b
ÃÂ [062C] => j
ÃÂ [062F] => d
Ãâ [0647] => h
ÃË [0648] => w
ÃÂ [0632] => z
Let me explain my situation more clearly:-)
I have a unicode editor, Unitype Global Writer. I save a unicode document
as a utf *.txt file. When I open that saved file in my TeX editor
(WinEdt), it comes out as extended ascii (that's the "gibberish"). So what
I wanted to do was convert the ascii "gibberish" to my Latin
transcription. It seems that what you are suggesting is to use the hex
representation and convert the unicode txt file into a Latin transcription
file directly and bypass the gibberish.
On your perl file, can you give me an example of how to use it? I tried
(in windows, with name
utf2tex.pl and unicode text in unicode-utf.txt) and get
=
perl utf2tex.pl unicode-utf.txt
Unknown discipline class ':utf8' at C:/Perl/lib/open.pm line 18.
BEGIN failed--compilation aborted at utf2tex.pl line 4.
=
from your script I tried, e.g.
$_ =~
s/\x{0627}/\x{0041}/esg;
# from alif to `A'
Your guidance will be greatly appreciated!
Thnx a million!
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Arabic-utf-8 (plus a sample)
Idris,
I know a bit of perl and would love to help. However, I fear that
sending us your stuff via mail will be a bit difficult because the utf-8
chracters get transformed into gibberish. Could you send the hexadecimal
code of the characters you want to convert? Or I could simply give you
the syntax, you'll know what to do. So here comes a perl script that
works for my greek stuff; I don't see why it shouldn't work with Arabic:
==cut here
#!/usr/bin/perl -w
use strict;
use open ':utf8';
open(NEW,">new.tex"); #opens file to print out the result
while (<>); { #this opens the file for reading
$_ =~
s/\x{HEXADECIMAL_VALUE_OF_CHARACTER}/\x{HEXADECIMAL_VALUE_OF_NEW_CHARACTER}/esg;
#this is the actual conversion
print NEW "$_";
#and this writes the result into file "new.tex"
}
close(NEW);
==and here
Make the script executable and call it with the name of a file as an
argument.
HTH
Thomas
On Sat, 2004-06-05 at 21:32, Idris Samawi Hamid wrote:
> Hi gang,
>
> For Arabic we use a Latin transcription in Aleph/(e-)Omega (or even
> ArabTeX) unless one of the encoding filters like utf-8 is used. Even for
> utf-8 files, however, it would be very useful to be able to convert a
> utf-8 file to Latin transcription for further processing by
> Aleph/(e-)Omega. For example, adding diacritics is much easier to do in
> Latin than in an Arabic script editor because Latin transcription is
> one-dimensional and adding diacritics to Arabic is a 2-dimen affair.
>
> The best thing would be a perl script but I don't know perl at all (except
> to run some some precreated scripts). If someone out of the kindness of
> their heart could write a short and simple script for just seven
> characters I could do the rest myself and present it back here.
>
> Now all of the Arabic charachters in utf-8 can be represented by extended
> ascii. I need something like this, that converts every extended ascii
> representation of Arabic utf-8 into a Latin transcription:
>
> ÃÂ => A
>
> ÃÂ => b
>
> ÃÂ => j
>
> ÃÂ => d
>
> Ãâ => h
>
> ÃË => w
>
> ÃÂ => z
>
> If someone could write a perl script that can accomplish the above
> conversion, I can manually fill in the rest of the script. Basically I use
> a modified version of the ArabTeX transcription.
>
> Here is a "gift" in return: a sample utf-8 Arabic file that can be
> processed by Aleph/(e-)Omega in ConTeXt (you will probably need to dvips
> this, though some dvi-viewers can do the postscript/16-bit thing):
>
> ==
> \hoffset=0pt % for Omega bug: has this been fixed?
>
> \def\ArabicUTF{\ocp\UTFArUni=inutf8 %% in88596
> %\ocp\UTFArUni=in88596
> \ocp\UniCUni=uni2cuni
> \ocp\CUniArab=cuni2oar
> \ocplist\UTFArOCP=
> \addbeforeocplist 1 \UTFArUni
> \addbeforeocplist 1 \UniCUni
> \addbeforeocplist 1 \CUniArab
> \nullocplist
> \pushocplist\UTFArOCP}
>
> \input m-gamma.tex
> \input type-omg.tex
> \switchtobodyfont[omarb,12pt] %
>
> \textdir TRT%
> \pardir TRT%
> \ArabicUTF
>
> \starttext
>
> ÃÅ Ãâ ÃÅ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
> ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
> ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ Ãâ ÃÂ Ãâ ÃÆ Ãâ Ãâ Ãâ Ãâ
> ÃË Ãâ ÃÅ
>
> \blank[big]
>
> %Ãâ ÃÅ ÃÂ ÃÅ ÃÂ ÃÂ Ãâ
>
> Ãâ Ã ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
> ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
> ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ Ãâ ÃÂ Ãâ ÃÆ Ãâ Ãâ Ãâ
> Ãâ ÃË Ãâ ÃÅ Ãâ ÃÅ ÃÂ
> ÃÅ ÃÂ ÃÂ Ãâ Ãâ Ãâ Ãâ Ãâ Ãâ Ãâ ÃË Ãâ ÃÅ Ãâ ÃÅ
> ÃÂ ÃÅ ÃÅ ÃÂ ÃÂ ÃÂ ÃÂ
> ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
> ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
> ÃÂ ÃÂ Ãâ ÃÂ ÃÆ Ãâ Ãâ Ãâ Ãâ ÃË Ãâ ÃÅ Ãâ ÃÅ ÃÂ
> Ãâ Ãâ Ãâ Ãâ Ãâ ÃÂ
> ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
>
> \blank[big]
>
> ÃâÃâ ÃâÃÅ ÃâàÃâÃÅ ÃâàÃâàÃâÃâ
> ÃâÃâ ÃâÃÂ
>
> ÃÂ ÃÂ ÃÂ ÃÂ Ãâ ÃË ÃÂ
>
> \stoptext
>
> ==
>
> Best
> Idris
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Arabic-utf-8 (plus a sample)
Hi gang,
For Arabic we use a Latin transcription in Aleph/(e-)Omega (or even
ArabTeX) unless one of the encoding filters like utf-8 is used. Even for
utf-8 files, however, it would be very useful to be able to convert a
utf-8 file to Latin transcription for further processing by
Aleph/(e-)Omega. For example, adding diacritics is much easier to do in
Latin than in an Arabic script editor because Latin transcription is
one-dimensional and adding diacritics to Arabic is a 2-dimen affair.
The best thing would be a perl script but I don't know perl at all (except
to run some some precreated scripts). If someone out of the kindness of
their heart could write a short and simple script for just seven
characters I could do the rest myself and present it back here.
Now all of the Arabic charachters in utf-8 can be represented by extended
ascii. I need something like this, that converts every extended ascii
representation of Arabic utf-8 into a Latin transcription:
ÃÂ => A
ÃÂ => b
ÃÂ => j
ÃÂ => d
Ãâ => h
ÃË => w
ÃÂ => z
If someone could write a perl script that can accomplish the above
conversion, I can manually fill in the rest of the script. Basically I use
a modified version of the ArabTeX transcription.
Here is a "gift" in return: a sample utf-8 Arabic file that can be
processed by Aleph/(e-)Omega in ConTeXt (you will probably need to dvips
this, though some dvi-viewers can do the postscript/16-bit thing):
==
\hoffset=0pt % for Omega bug: has this been fixed?
\def\ArabicUTF{\ocp\UTFArUni=inutf8 %% in88596
%\ocp\UTFArUni=in88596
\ocp\UniCUni=uni2cuni
\ocp\CUniArab=cuni2oar
\ocplist\UTFArOCP=
\addbeforeocplist 1 \UTFArUni
\addbeforeocplist 1 \UniCUni
\addbeforeocplist 1 \CUniArab
\nullocplist
\pushocplist\UTFArOCP}
\input m-gamma.tex
\input type-omg.tex
\switchtobodyfont[omarb,12pt] %
\textdir TRT%
\pardir TRT%
\ArabicUTF
\starttext
ÃÅ Ãâ ÃÅ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ Ãâ ÃÂ Ãâ ÃÆ Ãâ Ãâ Ãâ Ãâ ÃË Ãâ ÃÅ
\blank[big]
%Ãâ ÃÅ ÃÂ ÃÅ ÃÂ ÃÂ Ãâ
Ãâ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ Ãâ ÃÂ Ãâ ÃÆ Ãâ Ãâ Ãâ Ãâ ÃË Ãâ ÃÅ Ãâ ÃÅ ÃÂ
ÃÅ ÃÂ ÃÂ Ãâ Ãâ Ãâ Ãâ Ãâ Ãâ Ãâ ÃË Ãâ ÃÅ Ãâ ÃÅ ÃÂ ÃÅ ÃÅ ÃÂ ÃÂ ÃÂ ÃÂ
ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
ÃÂ ÃÂ Ãâ ÃÂ ÃÆ Ãâ Ãâ Ãâ Ãâ ÃË Ãâ ÃÅ Ãâ ÃÅ ÃÂ Ãâ Ãâ Ãâ Ãâ Ãâ ÃÂ
ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
\blank[big]
ÃâÃâ ÃâÃÅ ÃâàÃâÃÅ ÃâàÃâàÃâÃâ ÃâÃâ ÃâÃÂ
ÃÂ ÃÂ ÃÂ ÃÂ Ãâ ÃË ÃÂ
\stoptext
==
Best
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl/mailman/listinfo/ntg-context
