Hi all,
I would try to design a figure like
http://www.nibua-r.org/ConTeXt/sample.png
FLOWcharts seems to be a good tool to do that, but I have some troubles
to get "Simulation" and "Colision Detection" frames...
First, I thought of a meta-flowchart but I'm not sure that's possible.
Any ide
Pepe Barbe wrote:
> Hello,
>
> I've been trying to compile my document using XeTeX and it gives me
> the following error:
>
you probably need a newer context
% engine=xetex output=xtx
\externalfigure[cow.pdf] \end
works ok here (or one can give texexec --xetex filename)
in the process you sh
Renaud AUBIN a écrit :
I would try to design a
figure like
http://www.nibua-r.org/ConTeXt/sample.png
FLOWcharts seems to be a good tool to do that, but I have some troubles
to get "Simulation" and "Colision Detection" frames...
I have done a first sample: http://www.nibua-r.org/C
On 8/24/06, Hans Hagen wrote:
> Pepe Barbe wrote:
> > Hello,
> >
> > I've been trying to compile my document using XeTeX and it gives me
> > the following error:
> >
> you probably need a newer context
>
> % engine=xetex output=xtx
>
> \externalfigure[cow.pdf] \end
>
> works ok here (or one can giv
Taco wrote:
> Don't you need:
>
>\setuppapersize[A5,landscape][A4,landscape]
>\setuparranging[2DOWN,rotated]
>
The following produces a first page with p.1 on the right half, but a
blank 2nd page:
\setuppapersize[A5,landscape][A4,landscape]
\setuparranging[2DOWN,rotated]
\starttext
\inp
It works with jpg, pdf and png, with ConTeXt 2006-08-16 (beta).
Thanks,
Ricard
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
On 8/24/06, Pepe Barbe wrote:
> Hello,
>
> I am using GW's TeX distribution with ConTeXt. I am interested in
> using a different font other than Computer Modern. This distribution
> seems to come with a ton of fonts (More than I need at least). Using
> the basic ConTeXt provisions to access the fon
On 8/24/06, Hans Hagen wrote:
> Pepe Barbe wrote:
> > Hello,
> >
> > I've been trying to compile my document using XeTeX and it gives me
> > the following error:
> >
> you probably need a newer context
Hmmm ... most probably ImageMagic then. From rlxtools:
result = `identify -units PixelsPerCenti
[EMAIL PROTECTED] wrote:
Hi,
WN wrote:
Hello,
The last page in my documents is always empty. The document is setup as
singlesided via
Always, always (as in: it generates an empty page even if that results
in an uneven number of pages)?
Correct, always an empty pag
On 8/24/06, Hans Hagen <[EMAIL PROTECTED]> wrote:
>
> Pepe Barbe wrote:
> > I've been trying to compile my document using XeTeX and it gives me
> > the following error:
> >
> you probably need a newer context
This is what I am running right now:
Output written on texexec.pdf (1 page, 18244 bytes)
On 8/24/06, Mojca Miklavec <[EMAIL PROTECTED]> wrote:
>
> (From time to time it helps to delete the whole ConTeXt and then
> istall it again. I have no idea what went wrong before, but at least
> the document compiles now, although I don't get the images yet.)
I have reinstalled ConTeXt several ti
On 8/24/06, Pepe Barbe wrote:
> On 8/24/06, Hans Hagen wrote:
> >
> > Pepe Barbe wrote:
> > > I've been trying to compile my document using XeTeX and it gives me
> > > the following error:
> > >
> > you probably need a newer context
>
> This is what I am running right now:
>
> TeXExec | TeXExec | v
On 8/24/06, Mojca Miklavec <[EMAIL PROTECTED]> wrote:
>
> Can you take a look at write18 (or shell-escape)? Try to google for it
> since I don't know MacOS, but I'm sure you'll find it. You have to
> enable it on your computer, usually it's residing in "texmf.cnf", but
> that depends on the system
Sanjoy Mahajan wrote:
>
> Once I understand what's going on, I'll wikify!
Unfortunately, I do not understand it either. I wrote my
'dont you need..' based on symptoms, not on understanding.
Taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://w
Pepe Barbe wrote:
> On 8/24/06, Mojca Miklavec <[EMAIL PROTECTED]> wrote:
>
>> (From time to time it helps to delete the whole ConTeXt and then
>> istall it again. I have no idea what went wrong before, but at least
>> the document compiles now, although I don't get the images yet.)
>>
>
>
Pepe Barbe wrote:how does you rlog (of the tex run look), i.e. the real log
texexec --xetex yourfile > some.log
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hassel
Hello,
I wonder if it is possible to setup a layout with these requirements:
- it can be doublesided, that is, when doublesided the left margin (LM)
and right margin (RM) are different and mirrored on right/left pages.
- the headings (section, etc.) start just after the left margin.
- the tex
On 8/24/06, Mojca Miklavec <[EMAIL PROTECTED]> wrote:
> - You need to install ImageMagic if you don't have it yet.
>
> - My files didn't want to compile either. I deleted everything and
> installed ConTeXt from scratch (mswintex.zip, justtex.zip, XeTeX from
> W32TeX + "ctxtools --update" + remake f
After jumping through hoops, with some help I managed to get XeTeX
running and using TTF fonts directly with pdfTeX.
But before I go any further I would like to know what is your opinion
in using one or the other. When researching a bit on XeTeX I read
there were several caveates vs. using pdfTeX
On 8/24/06, Jeff Smith wrote:
> On 8/24/06, Mojca Miklavec wrote:
> > - You need to install ImageMagic if you don't have it yet.
> >
> > - My files didn't want to compile either. I deleted everything and
> > installed ConTeXt from scratch (mswintex.zip, justtex.zip, XeTeX from
> > W32TeX + "ctxtool
On 8/24/06, Pepe Barbe wrote:
> After jumping through hoops, with some help I managed to get XeTeX
> running and using TTF fonts directly with pdfTeX.
>
> But before I go any further I would like to know what is your opinion
> in using one or the other. When researching a bit on XeTeX I read
> ther
On Tue, 8 Aug 2006, Aditya Mahajan wrote:
> 3. Formula tagging
>
> amsmath allows formulas to be tagged. I will explain amsmath's
> behaviour and hope that Hans can come up with the context way of doing
> such things.
>
> Occasionally, one wants to tag a formula, e.g.
>
> \placefomrula[a] \startfor
Hi,
I want to use a floating figure in my text. I found an example on how
to use hangsidefloat, but my results are less than desirable.
Basically I have a long image I want to put on the side of the text.
Given that the text does not start at the beginning of the page and I
don't have extense pa
On Tue, 8 Aug 2006, Aditya Mahajan wrote:
[ A long list of feature requests ]
Here is something that was not in my original list: subformula
numbering.
Context allows one to number subformulas by specifying the subnumber.
Thus, if I want (1a) (1b) and (1c), I need to do
\placesubformula[+]{a}
24 matches
Mail list logo
