On 12/6/2018 7:30 AM, Jan U. Hasecke wrote:
Am 05.12.18 um 19:01 schrieb Wolfgang Schuster:
You can get a list of the files with
context --extra=setups --list
and create a document with a limited number of commands
from certain categories with
context --extra=setups delimitedtext,narrow
On 12/5/2018 10:29 PM, Alan Braslau wrote:
On Wed, 5 Dec 2018 19:47:31 +0100
Marco Patzer wrote:
Hi!
I've got a few unfortunate line breaks in my documents. In
particular, breaks are introduced in between the string “page” and
the number:
See figure 1 at page
2.
The reason is that man
On Thu, 6 Dec 2018 09:34:57 +0100
Hans Hagen wrote:
> > Also, how about:
> >
> > \at{\labeltext{atpage}}[#1]
>
> indeed, that is the command to use
Don't get too hung up on that command. That was just a quick way to
demonstrate the point and create an MWE.
> can you experiment with this
>
On 12/6/2018 10:26 AM, Marco Patzer wrote:
On Thu, 6 Dec 2018 09:34:57 +0100
Hans Hagen wrote:
Also, how about:
\at{\labeltext{atpage}}[#1]
indeed, that is the command to use
Don't get too hung up on that command. That was just a quick way to
demonstrate the point and create an MWE.
can
while experimenting with the sample transparency color code
\definecolor [transparentred] [r=1,t=.5,a=1]
\definecolor [transparentblue] [b=1,t=.5,a=1]
\definecolor [solidyellow] [y=1,t=1,a=1]
\starttext
\startTEXpage
~This is some sample text that goes behind the rectangles\hskip-80mm
\blackr
Hi Floris,
>
> if i change the yellow t value to .99
> \definecolor [solidyellow] [y=1,t=0.99,a=1]
> some green layer pops up.
>
>
Test works OK for me, with the two ConTeXt releases I tried:
current version: 2016.11.24 12:05
current version: 2018.12.01 13:20
macOS Mojave 10.14.1
Best
On 12/6/18 10:55 AM, Floris van Manen wrote:
> while experimenting with the sample transparency color code
> [...]
> if i change the yellow t value to .99
> \definecolor [solidyellow] [y=1,t=0.99,a=1]
> some green layer pops up.
>
> as this is all about software, there is a reason to this.
> it
indeed, it’s probably related to the preview of osx 10.11.6 version.
e.g. if i paste the pdf into this mail, i shows up correctly.
t4test.pdf
Description: Adobe PDF document
> On 6 Dec 2018, at 11:02, Taco Hoekwater wrote:
>
> Hi Floris,
>
>>
>> if i change the yellow t value to .99
>> \
On Thu, Dec 6, 2018 at 10:55 AM Floris van Manen wrote:
> while experimenting with the sample transparency color code
>
>
> \definecolor [transparentred] [r=1,t=.5,a=1]
> \definecolor [transparentblue] [b=1,t=.5,a=1]
> \definecolor [solidyellow] [y=1,t=1,a=1]
>
> \starttext
>
> \startTEXpage
>
On 12/6/18 7:36 AM, Jan U. Hasecke wrote:
> Hi all,
>
> why aligns left to right and right to left in this example?
>
> \setuphead [title] [align=left]
Hi Jan U.,
flushleft is the value to get left aligninig.
I read the explanation somewhere. Left and right aligned to the right
and left. They
Hello,
I'm using the following code, mentioned here some time ago, to get some info
about PDF:
\startluacode
figures.getinfo = function(name, page)
if type(name) == "string" then
name = { name = name, page = page }
end
if name.name then
local data = figures.push
On Thu, Dec 6, 2018 at 11:17 AM Procházka Lukáš Ing. wrote:
> Hello,
>
> I'm using the following code, mentioned here some time ago, to get some
> info about PDF:
>
>
> \startluacode
> figures.getinfo = function(name, page)
> if type(name) == "string" then
> name = { name = nam
Pablo Rodriguez schrieb am 06.12.18 um 11:14:
On 12/6/18 7:36 AM, Jan U. Hasecke wrote:
Hi all,
why aligns left to right and right to left in this example?
\setuphead [title] [align=left]
Hi Jan U.,
flushleft is the value to get left aligninig.
I read the explanation somewhere. Left and ri
Hello Luigi,
On Thu, 06 Dec 2018 11:23:25 +0100, luigi scarso wrote:
On Thu, Dec 6, 2018 at 11:17 AM Procházka Lukáš Ing. wrote:
Hello,
I'm using the following code, mentioned here some time ago, to get some
info about PDF:
\startluacode
figures.getinfo = function(name, page)
if
On Thu, Dec 6, 2018 at 11:54 AM Procházka Lukáš Ing. wrote:
> Hello Luigi,
>
> BTW: Ctx tells me "attempt to call a nil value (global 'report')" on
> "report("unknown file %a",fileone)" - do I have to enable/load something?
>
> should be something like
local report = logs.reporter("my applicati
Are you sure that data is not nil here?
If so, this function returns nil.
dr. Hans van der Meer
> On 6 Dec 2018, at 11:20, Procházka Lukáš Ing. wrote:
>
> Hello,
>
> I'm using the following code, mentioned here some time ago, to get some info
> about PDF:
>
>
> \startluacode
> figures.
Procházka Lukáš Ing. schrieb am 06.12.18 um 11:20:
Hello,
I'm using the following code, mentioned here some time ago, to get some
info about PDF:
\startluacode
figures.getinfo = function(name, page)
if type(name) == "string" then
name = { name = name, page = page }
end
it is the behaviour of the (old) osx preview app for sure.
when looking at the pdf, the thumbnails are correct, however when focussing on
the page it turns green.
its getting more urgent to move to Linux ;-)
.F
> On 6 Dec 2018, at 11:12, luigi scarso wrote:
>
>
>
> On Thu, Dec 6, 2018 at
> On 2 Dec 2018, at 19:01, Hans Hagen wrote:
>
> This super/supscript stuff is a bit more tricky because when a superscript 2
> is in the font, and a superscript 3 isn't, using a fake ^3 alongside that ^2
> quite certainly will look bad because the 2 is normally of a different design
> that a
Hans Åberg schrieb am 06.12.18 um 15:18:
On 2 Dec 2018, at 19:01, Hans Hagen wrote:
This super/supscript stuff is a bit more tricky because when a superscript 2 is
in the font, and a superscript 3 isn't, using a fake ^3 alongside that ^2 quite
certainly will look bad because the 2 is normal
> On 6 Dec 2018, at 15:23, Wolfgang Schuster
> wrote:
>
> The force key is valid for the \definefallbackfamily command, e.g.
>
> \definefallbackfamily [...] [...] [range={...},force=yes]
I tried to test it with the code below, but then it selects the stixtwomath
glyphs. So possibly the forc
I used \setupindenting[always,medium]. This works everywhere except after a
figure placed with \placefigure. Why does placing the figure suppress the
indent after it? And how can this behaviour be changed?
dr. Hans van der Meer
__
On 12/6/18 6:10 PM, Hans van der Meer wrote:
> I used \setupindenting[always,medium]. This works everywhere except
> after a figure placed with \placefigure. Why does placing the figure
> suppress the indent after it? And how can this behaviour be changed?
I wonder whehter \setupfloat[figure][inde
Thanks, indeed this does the trick.
But I wonder: Has \placefigure then a default [indentnext=no] instead of
abstaining from meddling with the indent setting?
dr. Hans van der Meer
> On 6 Dec 2018, at 21:25, Pablo Rodriguez wrote:
>
> On 12/6/18 6:10 PM, Hans van der Meer wrote:
>> I used \s
On 12/6/18 9:38 PM, Hans van der Meer wrote:
> Thanks, indeed this does the trick.
> But I wonder: Has \placefigure then a default [indentnext=no] instead
> of abstaining from meddling with the indent setting?
This might be similar to indenting after headings. To get the paragraphs
indented after
Dear list,
as far as I know, fonts.handlers.otf.addfeature has the following types:
substitution, alternate, multiple, ligature, kern and chainsubstitution.
Is there a type of feature that simply moves a single glyph when activated?
Many thanks for your help,
Pablo
--
http://www.ousia.tk
_
On 12/6/2018 9:55 PM, Pablo Rodriguez wrote:
Dear list,
as far as I know, fonts.handlers.otf.addfeature has the following types:
substitution, alternate, multiple, ligature, kern and chainsubstitution.
Is there a type of feature that simply moves a single glyph when activated?
i think that th
On 12/6/18 11:03 PM, Hans Hagen wrote:
> On 12/6/2018 9:55 PM, Pablo Rodriguez wrote:
>> Dear list,
>>
>> as far as I know, fonts.handlers.otf.addfeature has the following types:
>> substitution, alternate, multiple, ligature, kern and chainsubstitution.
>>
>> Is there a type of feature that simply
List,
I am trying to use the publications subsystem to support a
non-bibliographic database, as chapter 10 of mkiv-publications suggests
one can. My example is a database of quotations.
I have been partially successful, which is another way of saying there
are some issues I have not been abl
Dear list,
how can I get the value in Lua of width and the bearings of a given
glyph (such as Ὧ)?
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___
If your question is of interest to others as well, please
30 matches
Mail list logo