On 08/05/2016 03:03 PM, Marco Walther wrote:
On 08/05/2016 01:36 PM, Stuart D. Gathman wrote:
On Fri, 5 Aug 2016, Marco Walther wrote:
On 08/03/2016 05:25 AM, Stuart Gathman wrote:
I've made some progress getting this Tripplite to work:
http://gathman.org/2016/07/30/Standard_Schmandard/
On 08/05/2016 01:36 PM, Stuart D. Gathman wrote:
On Fri, 5 Aug 2016, Marco Walther wrote:
On 08/03/2016 05:25 AM, Stuart Gathman wrote:
I've made some progress getting this Tripplite to work:
http://gathman.org/2016/07/30/Standard_Schmandard/
Basically, plug it into a USB hub that
On Fri, 5 Aug 2016, Marco Walther wrote:
On 08/03/2016 05:25 AM, Stuart Gathman wrote:
I've made some progress getting this Tripplite to work:
http://gathman.org/2016/07/30/Standard_Schmandard/
Basically, plug it into a USB hub that actually implements USB2.0, then
power cycle the port
On 08/03/2016 05:25 AM, Stuart Gathman wrote:
I've made some progress getting this Tripplite to work:
http://gathman.org/2016/07/30/Standard_Schmandard/
Basically, plug it into a USB hub that actually implements USB2.0, then
power cycle the port when it hangs. It does seem to be a hardware
I've made some progress getting this Tripplite to work:
http://gathman.org/2016/07/30/Standard_Schmandard/
Basically, plug it into a USB hub that actually implements USB2.0, then
power cycle the port when it hangs. It does seem to be a hardware
problem with the USB controller.
On 05/24/2016
On May 22, 2016, at 10:18 AM, Stuart Gathman wrote:
>
> I have a ticket open with TrippLite, but at this point it seems to be a
> software, rather than hardware problem, since with the newer kernel and
> usbhid-ups, the ups stays on the bus, and I could kludge around the
> problem by making
I bought this UPS to use with NUT. I've used Belkin, APC, CyberPower,
Best, Powerware upses with NUT on dozens of servers beginning with RHEL3.
http://www.amazon.com/Tripp-Lite-Display-Protection-SMART1500LCDT/dp/B009TZTGWK
Since this was advertised as USB HID, I didn't expect any problems.
