Re: [Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

2012-09-05 Thread Massimo Gais
On Wed, Sep 5, 2012 at 5:58 PM, Arnaud Quette wrote: >> >> The only thing plugged into this UPS is the power supply for the >> RaspberryPi - nut reports the load as 0.0% :) I'm going to also plug in the >> 5-port switch and ADSL modem/router, I expect to be online for some time >> when there is

Re: [Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

2012-08-11 Thread Massimo Gais
On Sun, Aug 12, 2012 at 5:11 AM, Greg Vickers wrote: > On 11/08/12 06:58, Arnaud Quette wrote: > > Hi Massimo and Greg, > > @Greg: if you yet returned your unit, you now have a solution ;) > > I have not yet gotten rid of it, so thank you very much! It's a case of > download, extract, apply patch

Re: [Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

2012-08-11 Thread Massimo Gais
On Fri, Aug 10, 2012 at 11:58 PM, Arnaud Quette wrote: > > the driver runs fine. you should get a good upsc output now. > the "Comm lost" msg are part of code adjustments needed, but the code > already handle this fine, and recovers (check "entering get_answer(33)" for > example). > > could you pl

Re: [Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

2012-08-10 Thread Massimo Gais
Hello Arnaud, thanks for the effort for the patch! > I took most of this afternoon looking at this issue, and this should be > fixed with the attached patch > It applies fine on 2.6.5, using the following command: > # cd nut-2.6.5 > # patch -p0 < /path/to/xcp-rcv-loop.diff > # make > > I've teste

Re: [Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

2012-08-10 Thread Massimo Gais
On Fri, Aug 10, 2012 at 12:22 PM, Arnaud Quette wrote: > Hi Massimo and Greg, > Hello Arnaud, >> >> instead of >> receiving the whole 171 bytes transfer in one single gulp. > > > thus, the data of the 2nd sequence is missing (after "3b ab 01"): > > 28 82 c0 01 00 02 00 00 80 0f 00 00 00 > 00 00 0

Re: [Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

2012-08-09 Thread Massimo Gais
On Wed, Aug 8, 2012 at 1:32 PM, Greg Vickers wrote: > Fantastic Massimo, thank you! I have yet to replace my 5110, so if there is > anything I can contribute, I will do. > > It looks like the only difference between our systems is the kernel version > (I've put the latest rasbian image on, which

[Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

2012-08-08 Thread Massimo Gais
>> >> I'm going to go with the last option I have, and will replace this UPS >> with one that works with this combination of architecture and OS! :) > > > yup, still an option ;) Hello, I have the same issue with Raspberry Pi (running 'raspbian') and Powerware 5110, and I'd like to help to solve