1. ping -I bond0 192.168.123.174
yes, ok
2. a week ago, I have setup the iscsi-initiator linux without eth0.
only bond0 (mode4, eth1 and eth2) was assigned IP addr. eth0 was
unassigned and without connection to switch. Login to iscsi target was
ok via bond0. There was no need to create iface0.
Hello!
I have a very basic question about open-iscsi.
I successfully logged in using iscsiadm and open-iscsi created two
block devices corresponding to
10th and 15th LUNs:
# ls -l /dev/disk/by-path/ip*
lrwxrwxrwx 1 root root 9 Mar 9 18:51 /dev/disk/by-path/
We've got a
Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
centos 5.4
iscsi-initiator-utils-6.2.0.871-0.12.el5_4.1
I've been trying without success to make the iscsi mounts stop
disconnecting like clockwork after about 10-24 hours. When it works,
the performance is
On Tue, Mar 09, 2010 at 02:26:51PM -0800, Murray wrote:
We've got a
Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
centos 5.4
iscsi-initiator-utils-6.2.0.871-0.12.el5_4.1
I've been trying without success to make the iscsi mounts stop
disconnecting like clockwork
On Mar 10, 12:55 pm, Pasi Kärkkäinen pa...@iki.fi wrote:
On Tue, Mar 09, 2010 at 02:26:51PM -0800, Murray wrote:
We've got a
Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
centos 5.4
iscsi-initiator-utils-6.2.0.871-0.12.el5_4.1
I've been trying without success
On 03/09/2010 04:26 PM, Murray wrote:
We've got a
Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
centos 5.4
iscsi-initiator-utils-6.2.0.871-0.12.el5_4.1
What kernel are you using?
I've been trying without success to make the iscsi mounts stop
disconnecting like
On 03/10/2010 02:14 AM, aclhkaclhk aclhkaclhk wrote:
1. ping -I bond0 192.168.123.174
yes, ok
Could you run iscsid manually in debugging mode and send me all the log
output.
Instead of doing service iscsi start just do
// this starts iscsi with debugging going to the console
iscsid -d 8
On Wed, Mar 10, 2010 at 10:27:57AM -0800, Murray wrote:
On Mar 10, 12:55 pm, Pasi Kärkkäinen pa...@iki.fi wrote:
On Tue, Mar 09, 2010 at 02:26:51PM -0800, Murray wrote:
We've got a
Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
centos 5.4