Re: Something doesn't work on Ubuntu 8.10 32bit
In ubuntu , after configure open-iscsi,you should reboot computer,then 'sudo fdisk -l'.If you can see a new disk,it's ok -- wayne On Fri, Nov 21, 2008 at 3:13 AM, Mike Christie <[EMAIL PROTECTED]> wrote: > > Alex wrote: > > Hi, I am trying to connect to an iSCSI volume from my Ubuntu 8.10 > > 32bit server install. > > > > This is what I have done: > > sudo apt-get install open-iscsi > > sudo pico /etc/iscsi/iscsid.conf and set node.startup = automatic > > sudo sudo iscsiadm -m discovery -t sendtargets -p 192.168.xxx.xxx > > > > which returned 3 lines of things like this "iqn. > > 2006-01.com.openfiler:tsn.exodus" of which I only wanted that specific > > one. > > > > sudo /etc/init.d/open-iscsi restart > > > > this made 3 logins into each of the 3 things above. Since I only > > wanted one of the three, I looked around, and found the directories > > matching their names, and deleted all info regarding the two that I > > It is safer to just do > > iscsiadm -m node -T target -p ip:port -o delete > > for the ones you do not want. > > > > didn't want. At that point, doing a > > sudo /etc/init.d/open-iscsi restart > > only listed one login message. Here is what comes up > > > > $ sudo /etc/init.d/open-iscsi restart > > > Is this using the init script from the open-iscsi tarball or one from > Ubuntu? Does Ubuntu have a iscsi package now (we got 2 Ubuntu bug > reports this week and zero for months)? > > > > * Disconnecting iSCSI > > targets [ OK ] > > * Stopping iSCSI initiator > > service [ OK ] > > * Starting iSCSI initiator service > > iscsid [ OK ] > > * Setting up iSCSI targets > > Login session [iface: default, target: iqn. > > 2006-01.com.openfiler:tsn.exodus, portal: 192.168.xxx.xxx,3260] > > > > [ OK ] > > $ sudo /etc/init.d/open-iscsi status > > Current active iSCSI sessions: > > iscsiadm: Could not get host for sid 1. > > iscsiadm: could not get host_no for session 6. > > iscsiadm: could not find session info for session1 > > iscsiadm: Can not get list of active sessions (6) > > > > The first command looks to be fine, but then when I do a status, it > > shows errors. I dont know if I can mount the volume at this point, > > nor do I know how to, since no dev is listed... > > > Could you send the init script? What kernel are you using? > > It may be that when you did the restart sessions did not get cleaned up > right or it might just be that you are using a older open-iscsi version > that does not support a newer kernel due to sysfs changes. > > > > > > I tried compiling a new version of open-iscsi but I can't figure out > > what to do. > > Here is what I did: > > sudo apt-get install build-essential > > Then I installed the kernel headers by using synaptic > > > > I then went into the open-iscsi-2.0-870 directory using the terminal, > > and typed in > > sudo make install > > > > But it ends with a failed message. There are a lot of errors, this is > > the first one > > > > In file included from usr/iscsid.c: > > 34: > > usr/mgmt_ipc.h:23:22: error: iscsi_if.h: No such file or directory > > In file included from usr/mgmt_ipc.h:24, > > from usr/iscsid.c:34: > > usr/config.h:204: error: 'TARGET_NAME_MAXLEN' undeclared here (not in > > a function) > > > > > > The end is > > usr/iscsid.c: In function 'sync_session': > > usr/iscsid.c:196: error: 'CAP_FW_DB' undeclared (first use in this > > function) > > usr/iscsid.c:196: error: (Each undeclared identifier is reported only > > once > > usr/iscsid.c:196: error: for each function it appears in.) > > make: *** [usr/iscsid] Error 1 > > > > I will try to compile it here. I think I have a older Ubuntu setup though. > > > > --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: Something doesn't work on Ubuntu 8.10 32bit
Alex wrote: > Hi, I am trying to connect to an iSCSI volume from my Ubuntu 8.10 > 32bit server install. > > This is what I have done: > sudo apt-get install open-iscsi > sudo pico /etc/iscsi/iscsid.conf and set node.startup = automatic > sudo sudo iscsiadm -m discovery -t sendtargets -p 192.168.xxx.xxx > > which returned 3 lines of things like this "iqn. > 2006-01.com.openfiler:tsn.exodus" of which I only wanted that specific > one. > > sudo /etc/init.d/open-iscsi restart > > this made 3 logins into each of the 3 things above. Since I only > wanted one of the three, I looked around, and found the directories > matching their names, and deleted all info regarding the two that I It is safer to just do iscsiadm -m node -T target -p ip:port -o delete for the ones you do not want. > didn't want. At that point, doing a > sudo /etc/init.d/open-iscsi restart > only listed one login message. Here is what comes up > > $ sudo /etc/init.d/open-iscsi restart Is this using the init script from the open-iscsi tarball or one from Ubuntu? Does Ubuntu have a iscsi package now (we got 2 Ubuntu bug reports this week and zero for months)? > * Disconnecting iSCSI > targets [ OK ] > * Stopping iSCSI initiator > service [ OK ] > * Starting iSCSI initiator service > iscsid [ OK ] > * Setting up iSCSI targets > Login session [iface: default, target: iqn. > 2006-01.com.openfiler:tsn.exodus, portal: 192.168.xxx.xxx,3260] > > [ OK ] > $ sudo /etc/init.d/open-iscsi status > Current active iSCSI sessions: > iscsiadm: Could not get host for sid 1. > iscsiadm: could not get host_no for session 6. > iscsiadm: could not find session info for session1 > iscsiadm: Can not get list of active sessions (6) > > The first command looks to be fine, but then when I do a status, it > shows errors. I dont know if I can mount the volume at this point, > nor do I know how to, since no dev is listed... Could you send the init script? What kernel are you using? It may be that when you did the restart sessions did not get cleaned up right or it might just be that you are using a older open-iscsi version that does not support a newer kernel due to sysfs changes. > > I tried compiling a new version of open-iscsi but I can't figure out > what to do. > Here is what I did: > sudo apt-get install build-essential > Then I installed the kernel headers by using synaptic > > I then went into the open-iscsi-2.0-870 directory using the terminal, > and typed in > sudo make install > > But it ends with a failed message. There are a lot of errors, this is > the first one > > In file included from usr/iscsid.c: > 34: > usr/mgmt_ipc.h:23:22: error: iscsi_if.h: No such file or directory > In file included from usr/mgmt_ipc.h:24, > from usr/iscsid.c:34: > usr/config.h:204: error: ‘TARGET_NAME_MAXLEN’ undeclared here (not in > a function) > > > The end is > usr/iscsid.c: In function ‘sync_session’: > usr/iscsid.c:196: error: ‘CAP_FW_DB’ undeclared (first use in this > function) > usr/iscsid.c:196: error: (Each undeclared identifier is reported only > once > usr/iscsid.c:196: error: for each function it appears in.) > make: *** [usr/iscsid] Error 1 > I will try to compile it here. I think I have a older Ubuntu setup though. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Something doesn't work on Ubuntu 8.10 32bit
Hi, I am trying to connect to an iSCSI volume from my Ubuntu 8.10 32bit server install. This is what I have done: sudo apt-get install open-iscsi sudo pico /etc/iscsi/iscsid.conf and set node.startup = automatic sudo sudo iscsiadm -m discovery -t sendtargets -p 192.168.xxx.xxx which returned 3 lines of things like this "iqn. 2006-01.com.openfiler:tsn.exodus" of which I only wanted that specific one. sudo /etc/init.d/open-iscsi restart this made 3 logins into each of the 3 things above. Since I only wanted one of the three, I looked around, and found the directories matching their names, and deleted all info regarding the two that I didn't want. At that point, doing a sudo /etc/init.d/open-iscsi restart only listed one login message. Here is what comes up $ sudo /etc/init.d/open-iscsi restart * Disconnecting iSCSI targets [ OK ] * Stopping iSCSI initiator service [ OK ] * Starting iSCSI initiator service iscsid [ OK ] * Setting up iSCSI targets Login session [iface: default, target: iqn. 2006-01.com.openfiler:tsn.exodus, portal: 192.168.xxx.xxx,3260] [ OK ] $ sudo /etc/init.d/open-iscsi status Current active iSCSI sessions: iscsiadm: Could not get host for sid 1. iscsiadm: could not get host_no for session 6. iscsiadm: could not find session info for session1 iscsiadm: Can not get list of active sessions (6) The first command looks to be fine, but then when I do a status, it shows errors. I dont know if I can mount the volume at this point, nor do I know how to, since no dev is listed... I tried compiling a new version of open-iscsi but I can't figure out what to do. Here is what I did: sudo apt-get install build-essential Then I installed the kernel headers by using synaptic I then went into the open-iscsi-2.0-870 directory using the terminal, and typed in sudo make install But it ends with a failed message. There are a lot of errors, this is the first one In file included from usr/iscsid.c: 34: usr/mgmt_ipc.h:23:22: error: iscsi_if.h: No such file or directory In file included from usr/mgmt_ipc.h:24, from usr/iscsid.c:34: usr/config.h:204: error: ‘TARGET_NAME_MAXLEN’ undeclared here (not in a function) The end is usr/iscsid.c: In function ‘sync_session’: usr/iscsid.c:196: error: ‘CAP_FW_DB’ undeclared (first use in this function) usr/iscsid.c:196: error: (Each undeclared identifier is reported only once usr/iscsid.c:196: error: for each function it appears in.) make: *** [usr/iscsid] Error 1 I could paste the whole thing if needed... What should I do? --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
