Ok, i seem to read on the irc log, that the problem is solved, 龙智 was using
a different toolchain for building gen-blob than the one the developers
recommends, (some angstrom's or the one from OE are known to be good, it is
documented on the wiki) 龙智, can you confirm this?
Also, does your system,
Hi,
When I use OE to build kernel, the white screen issue is resolved. Now
kernel can boot normally.
Thanks Daniel and Fred.
Andy Loong
2009/6/19 Fred . frede...@gmail.com
Ok, i seem to read on the irc log, that the problem is solved, 龙智 was using
a different toolchain for building gen-blob
2009/6/16 Daniel Ribeiro drw...@gmail.com
Em Ter, 2009-06-16 às 21:06 +0800, 龙智 escreveu:
Hi Daniel,
I'm on the ezx/current branch, and using the .config file from
arch/arm/configs/ezx_defconfig.
I tried to get memdump but failed. When I insert the battery back, the
phone automatically
Hi Daniel,
I'm on the ezx/current branch, and using the .config file from
arch/arm/configs/ezx_defconfig.
I tried to get memdump but failed. When I insert the battery back, the phone
automatically boot into the stock operating system, so I haven't chance to
enter gen-blob usb mode(BTW, I suppose I
I tried many times, and exactly get the same result. I did that as
following:
1. upload kernel to the phone, cause the white screen
2. remove the battery, and then put it back as soon as possible
3. run boot_usb setflag usb boot_usb gen-blob 0 to enter gen-blob USB
mode, then LCD display:
Daniel, can you tell me how to check host dmesg? I've never used this.
2009/6/16 Daniel Ribeiro drw...@gmail.com
Em Ter, 2009-06-16 às 23:04 +0800, 龙智 escreveu:
I tried many times, and exactly get the same result. I did that as
following:
1. upload kernel to the phone, cause the white
Daniel,
When I send gen-blob to the phone, I got a warning:
$ sudo ./boot_usb gen-blob 0
$Id: boot_usb.c 2462 2009-04-12 22:55:17Z ao2 $
Serching for EZX phone: E2/A1200/E6/A910 found.
Uploading kernel: 100% OK
Warning, params is not supported on your phone, please consider using
gen-blob
Calling
Em Ter, 2009-06-16 às 09:38 +0800, 龙智 escreveu:
I compile the latest OpenEzx kernel(2.6.30) , and upload it to my E6
via boot_usb and gen-blob tools(following Getting Started - OpenEZX),
sudo ./boot_usb setflag usb
sudo ./boot_usb gen-blob 0
and then,
./boot_usb zImage- machid
