Is it possible to run X applications from within an lx zone?
If so, would it work for the global zone to run the X server and the lx
zone to provide plasma/KDE?
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
I'm putting together a home lab / cluster for computational chemistry as a
private individual. I'm thinking OpenIndiana on the head node (for a
desktop) and OmniOS on the compute nodes. Are there any downsides to this
that I should be mindful of?
Thanks!
http://wiki.illumos.org/display/illumos/ZFS+and+Advanced+Format+disks
I had the same problem I could never get the sd.conf stuff to work out right
for recognizing my 1.5tb seagates as 4k drives so what I did is backed up my
entire pool. Destroyed my pool and remade the pool with my new 2gb drive
I would like to know will this project eventually get a discussion forum vs
using mailing list.
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
I am trying to decide if I should go with Omnios or OpenIndiana for my
storage needs. So I would like to ask is this project still under active
development? I do not see much activity on the website or any other medium
such a twitter.
___
sharectl set -p nfsmapid_domain=mydomain.local nfs
Then set the appropriate nfs permissions on the zfs file system.
(I'll need to find the details on this bit if you need it)
Mark.
On 17/09/2014 1:39 a.m., Gregory Youngblood wrote:
I don't know if things have changed but a couple of years
and under 30 for write.
I do have access to an 8Gb one I could try next.
The luns will eventually be for Commvault storage, with a 64k block
size. Trying different zfs block sizes hasn't made a significant
difference to the Windows throughput.
Mark.
On 4/09/2014 9:31 p.m., Liam Slusser wrote
No switch, just a direct cable at present, so point to point.
On 6/09/2014 5:55 a.m., Liam Slusser wrote:
Mark -
No I didn't change any of the HBA bios or QLT parameters. Are you going
into a fibre channel switch?
thanks,
liam
On Fri, Sep 5, 2014 at 1:06 AM, Mark mark0...@gmail.com wrote
for an Emulex HBA.
Can anyone offer suggestions on identifying possible causes ?
Mark.
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
On 23/07/2014 5:38 a.m., Harry Putnam wrote:
Mark mark0...@gmail.com writes:
On 21/07/2014 7:11 p.m., Harry Putnam wrote:
Setup:
Hardware: HP xw8600 2x Xeon (5470) 3.3 Ghz - 32 GB ram
(goal was to get past whatever prevents oi iso from working when
hdw is in default settings
, or booting from USB drives,
which can be even more problematic to try to resolve the problem.
So well done, you have made it a few rungs up the experience ladder.
Mark.
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http
It could be that once booted, it didn't find the dvd drive again.
On 20/07/2014 5:35 p.m., Harry Putnam wrote:
Setup: Server and Desktop ISO, attempting to boot an HP xw8600
A 2x Xeon (5470) with 32 GB ram and 2 1tb hdd.
I've attempted booting an HP xw8600 from both server and desktop
and haven't
had any hangs at syncing file systems . done
Now the keyboard lights blink and the system powers off right after
displaying syncing file systems . done
Hope this helps someone in the future.
-Original Message-
From: Mark Walmsley [mailto:mark.walms...@rocketmail.com]
Sent
Hi,
For some reason I can't power off my PC running openindiana build 151a9
Shutdown -i5 -g0 -y
Just sits at
Syncing file systems . done
Same with init 5 or poweroff
Init 0 press any key to reboot works.
Pressing the power button also leaves me syncing file systems .
this is not much use to you but
I find it a useful backup for when you have to reinstall windows on a multi
boot machine.
Cheers
Mark
***
This e-mail is confidential and privileged. If you
One suggestion for the future for better reliability.
Avoid using WDC WD20EARS, they aren't great, and hopeless on SAS
controllers.
Avoid mixing disk brands or models in a zpool.
The different behaviour can trigger issues.
On 23/10/2013 7:46 p.m., Clement BRIZARD wrote:
I cleared the
For whatever it's worth, I've been buying SM servers for the last couple
years. I had a motherboard failure and they had a replacement to me next
morning. I didn't have to ship anything except the defective board once I
replaced it.
Mark
On Saturday, October 19, 2013, Bob Friesenhahn wrote
, and then later if I need the other 4 drives,
can I add them to the same zpool without having to rebuild from scratch?
Thanks
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana
On 13/07/2013 9:13 a.m., Jim Klimov wrote:
On 2013-07-12 21:52, Bryan N Iotti wrote:
Thank you all for helping make this clearer.
So, in order to compile something using the same tools that are used to
build /stable, I would use pkg:/developer/sunstudio12u1 while for
hipster I'd use GCC 4.6.3?
-auto-snap_monthly-2012-01-10-14h35does
not exist
I guess it's saying there is a dependency on that old snapshot that must
not exist anymore, so it can't build the zone properly on the destination
server. How do I resolve this? Am I missing a switch in my command
somewhere?
Thanks!
--
Mark
...@hotmail.com wrote:
On May 19, 2013, at 7:27 PM, Mark Creamer wrote:
I've been trying for weeks to get a zone off old hardware onto new. Both
servers are running exactly the same OI release, 151a7. I have not been
able to find a document that I can follow and get successful results.
I've
probably get you up and
running.
HTH
On May 20, 2013, at 12:38 PM, Mark Creamer wrote:
Well, sort of. It definitely got me thinking in a different direction,
I
found my mistake(s) and now I am able to finally attach and boot the
zone.
So thank you very much for that pointer
vnic is correct for the
new machine
5. I attempt to attach it on the new server, which fails.
Maybe is someone can just tell me what they do to accomplish this, or point
me to a different how-to. I haven't been able to find anything else.
Thanks
--
Mark
turning on debugging, but as a beginner at driver debugging
I'm not sure I achived the desired result and got no useful info from it.
Anyone have experience with Sata Port Multipliers and can share a few
pointers ?
Mark.
___
OpenIndiana-discuss mailing
For whatever it's worth once you get the networking sorted, every time I've
used the procedure listed here:
http://blog.davekoelmeyer.co.nz/2011/06/05/migrating-an-openindiana-zone-from-one-system-to-another/
it has worked perfectly. Might be useful for you.
Mark
On Thu, Mar 14, 2013 at 3:23 PM
I'm trying to scp some files between a couple oi_151a5 machines. One is
physical, the other is a VM running on VMware. Both show 1000 Mbit links,
but scp is only copying at about 8 Mbps (megabits, not bytes). Any ideas
what I should look at to see where the bottleneck is?
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman
-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana
Ricardo, I apologize - I have a RocketRAID but it in fact is not the same
model as you have. So my reply may not apply. Sorry I tried to rely on
memory without verifying. Best regards,
Mark
On Fri, Oct 12, 2012 at 2:14 PM, Pepe Komatsu ppkoma...@gmail.com wrote:
Hi everybody.
Someone have
cannot risk not being able to start those zones
Mark
On Thu, Sep 13, 2012 at 11:26 PM, Yuri Pankov yuri.pan...@gmail.com wrote:
On Thu, 13 Sep 2012 23:21:30 -0400, Mark Creamer wrote:
My server is currently at oi151a5, and it's been about a month, so I ran
pkg image-update to check
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
know how to clone existing zones, but not sure how to do it
from a snapshot.
Thanks
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
on the ideas of someone more
knowledgeable to automate my snapshot and recovery efforts.
--
Mark Creamer
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
for that zone?
Thanks,
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
__**_
OpenIndiana-discuss mailing list
OpenIndiana-discuss@**openindiana.orgOpenIndiana-discuss@openindiana.org
http://openindiana.org/**mailman/listinfo/openindiana-**discusshttp://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
. Later later ...
I just bought a V890 for NZD 72.00 !! but that is for another task.
Glad I didn't have to ship it !!
But I do have a V440 waiting patiently for an OI install.
(4 x CPU, 8Gb mem 4 x 72Gb Hdd)
It can be made available for remote testing.
Mark.
tnx.
%martin
by Multiple Windows clients?
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
___
OpenIndiana-discuss mailing
know your disks are going to work.
And then buy the Intel Server NIC. (Disable the broadcom in BIOS).
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
document it this time :-)
Thanks!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
),
checksum (sha256), snapdir (visible - I like to see the .zfs).
Jan
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
-snapshot would be creating
snapshots for each VM, rather than for the entire ../vmimages file system
each time.
So, is there an easy way to make a separate zfs file system for each of the
existing directories below ../vmimages? I am able to take the VM guests
down to do this as needed.
Thanks,
--
Mark
Thanks Jan, that sounds easy enough. I'll try it with a non-critical one
that I use for testing but your explanation looks like it will be more
straightforward than I expected. I appreciate the help.
On Thu, Aug 2, 2012 at 4:59 PM, Jan Owoc jso...@gmail.com wrote:
Hi Mark,
On Thu, Aug 2, 2012
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org
You might supplement the advice you get here with this post from
Constantin Gonzales on his blog. I found it very helpful when I was
setting up my Solaris storage server.
http://constantin.glez.de/blog/2010/07/solaris-zfs-synchronous-writes-and-zil-explained
-Mark
On Mon, Jun 4, 2012 at 11:24 AM
the scp?
Thanks for any advice.
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
Having the same issue after updating global and non-global zones to
oi_151a4. Cant install anything new on the non-global zones.
- Mark
On Fri, May 11, 2012 at 5:13 AM, Milan Jurik milan.ju...@xylab.cz wrote:
Hi,
after update to prestable3, all my local zones are reporting pkg: No image
found
first?
Thanks
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
And don't forget to configure or disable the firewall.
That's what my last issue with lack of connectivity turned out to be.
It may be on and blocking by default.
On 2/05/2012 6:13 p.m., Richard Elling wrote:
On May 1, 2012, at 8:41 PM, Tim Dunphy wrote:
hello list
I have attempted to
produce the desired outcome.
I have used 4k disks (wd20ears) in 3 and 4 disk raidz pools, but they
are used for archiving, so just have data dumped to them.
Few issues on Sata ports, but dodgy on SAS.
Mark
On 1/05/2012 8:23 a.m., Peter Wood wrote:
I'm building a storage server with Dell
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
On 3/05/2012 7:07 a.m., Gordon Ross wrote:
On Wed, May 2, 2012 at 2:47 PM, Richard Elling
richard.ell...@richardelling.com wrote:
On May 2, 2012, at 12:25 AM, Mark wrote:
There are two issues.
The first is correct partition alignment, the second ashift value.
In theory, I haven't tested
a big
impact as some drives can fail during the re-silver process.
Running a full read/write using format is usually enough to fix the bad
block permanently.
If not, then it's RMA'd.
Mark.
On Thu, Apr 12, 2012 at 1:30 PM, Karl Rossing
karl.ross...@barobinson.com wrote:
I'm running
Now it starts properly. Can anyone confirm for me that the permissions
are correct though? I just want to make sure it's secure and I think
755 might not be restrictive enough??
Thanks again,
Mark
On Wed, Apr 11, 2012 at 7:40 PM, Gary Mills gary_mi...@fastmail.fm wrote:
On Wed, Apr 11, 2012
there referencing the
problem. Nothing about the service at all, just the mail service.
I'm just looking for some help on where the problem might be logged,
since I can't find anything in the above 2 log files.
--
Mark
___
OpenIndiana-discuss mailing
=`zpool list -H -o capacity ${1} | sed -e 's/%//g' `
#echo $diskused
if [ $diskused -ge 84 ]
then echo WARNING
exit 1
fi
if [ $diskused -gt 90 ]
then echo CRITICAL
exit 1
fi
if [ $diskused -lt 84 ]
then echo OK
fi
-
Mark
-discuss
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
probably just misunderstanding how to use the configuration
tool, not sure. Thanks for any advice.
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
-discuss
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss
this planet.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
,
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
OK excellent. Thanks for your reply Jeppe
On Wed, Jan 25, 2012 at 10:37 AM, Jeppe Toustrup openindi...@tenzer.dkwrote:
On Wed, Jan 25, 2012 at 16:30, Mark Creamer white...@gmail.com wrote:
I'm trying to get a definitive answer on keeping the time accurate in my
non-global zones. Is it only
This looks to be a major change to how ON/net is being built.
http://blogs.oracle.com/ali/entry/much_ado_about_nothing_stub
Will this be a show stopper when integrating any future source released
by Oracle ?
Mark.
___
OpenIndiana-discuss mailing
finally have found time to make a working build environment, so it may
be time to dig deeper.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
20:47, Mark Creamer wrote:
One of our servers we're trying to move off of Linux and on to OI runs
Tomcat and Jasper Reports. Jasper is complaining that it needs Arial
font.
I remember once that I was able to install a truetype fonts package from
the OpenSolaris extras repo, but now
Alan thank you very much and happy holidays
Mark
On Thursday, December 22, 2011, Alan Coopersmith
alan.coopersm...@oracle.com wrote:
On 12/22/11 10:08, Mark Creamer wrote:
Makes sense about the licensing. Thank you for that explanation. I see
that the
fonts available at the link you supplied
these fonts installed on OI? Im running 151a.
Thank you,
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
On 20/12/2011 6:29 a.m., Gregory Youngblood wrote:
This seems potentially bad all the way around to me. Hopefully this turns out
to be a real, officially blessed release and not a leak.
It doesn't look to be official, since it does contain some closed source
code but is mostly CDDL and even
.
What's the right way to handle this?
Thank you!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
: link busy
Can't seem to figure out what I need to do to delete it.
Thanks!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
Oh sorry that's a typo. Sorry to confuse...
Line 3 should read dladm delete-vnic vnic0
But I do get the deletion error even when I actually type it correctly :-)
On Mon, Dec 19, 2011 at 1:42 PM, Jeppe Toustrup openindi...@tenzer.dkwrote:
On Mon, Dec 19, 2011 at 19:19, Mark Creamer white
4 port non-uio 1Gbit and two port 10G non-uio
Supermicro cards with no changes, since early OI releases up to 151.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana
OK Thanks for that explanation. Yes it does match.
-Mark
On Tue, Dec 13, 2011 at 6:19 PM, Joshua M. Clulow j...@sysmgr.org wrote:
On 14 December 2011 09:44, Mark Creamer white...@gmail.com wrote:
It does download via wget, but I haven't used shasum before. So I wasn't
sure which shasum
these installs to? By the
way, last week I did try switching to a different (Internet) repository at
someone's suggestion. I think it was in Germany (.de domain). It failed
too.
'Bout out of ideas (and time)...any other ideas? I greatly appreciate
everyone's help.
On Wed, Dec 14, 2011 at 9:01 AM, Mark
:47 AM, Mark Creamer white...@gmail.com wrote:
Just tried from a different OI 151a box, in a different physical location
with different Internet access. It fails too, but just to keep things
interesting, it fails on a different package:
mcreamer@sdbackup:/zones$ sudo zoneadm -z testzone
great.
Man I hope this information helps someone else avoid this issue.
Thank you to all of you who were so willing to help. People like you are
what makes working with complex systems possible, and OpenIndiana in
particular such a great OS.
Best regards,
Mark
On Wed, Dec 14, 2011 at 3:13 PM, Mark
, or a problem where the connection drops. Thank you very
much for your thoughts though.
On Tue, Dec 13, 2011 at 1:44 PM, Jeppe Toustrup openindi...@tenzer.dkwrote:
On Tue, Dec 13, 2011 at 19:26, Mark Creamer white...@gmail.com wrote:
Hi all, I'm hoping someone can give me some ideas I haven't
Exactly the same URL. I just tried it again to be sure.
On Tue, Dec 13, 2011 at 3:12 PM, Joshua M. Clulow j...@sysmgr.org wrote:
On Dec 14, 2011 5:54 AM, Mark Creamer white...@gmail.com wrote:
The thing that is interesting about trying to set up the zones in OI is
that it *always* fails
10283476ec06bd1ad87b851e050b2b35c00ac78d
On Tue, Dec 13, 2011 at 4:52 PM, Joshua M. Clulow j...@sysmgr.org wrote:
On Dec 14, 2011 8:32 AM, Mark Creamer white...@gmail.com wrote:
Exactly the same URL. I just tried it again to be sure.
What happens if you try and wget the file? Does it work? Does the shasum
The only similar thing I've seen is when a mount-point has something in
it. Then the ZFS file system will refuse to mount-over that directory. As
your zone needs to mount before you can boot it, start looking at your ZFS
mounting problem first.
Regards,
--
.\\ark
really confused what I'm doing wrong. Has anyone else experienced a
problem with creating a new zone where the install phase fails due to a
package failing to download?
Thanks
On Wed, Dec 7, 2011 at 6:30 PM, Mark Creamer white...@gmail.com wrote:
OK, I'm sorry I didn't catch this before. I
the zone from scratch
2. Use a more reliable package repo (assuming that's what the problem is
with the download)
Thanks!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana
PM, Mark Creamer white...@gmail.com wrote:
Thank you. Pretty new with this, so I didn't realize I had additional
package mirrors available. I should have looked into that possibility. The
server is running oi_151a
I'll try the different mirror(s) and see what happens.
Best regards,
Mark
The ASUS P6T6 WS Revolution paired-with a Xeon-class Server processor.
It's a bit of an older chipset; but, it supports 24GB of RAM.
http://usa.asus.com/Motherboards/Intel_Socket_1366/P6T6_WS_Revolution/#specifications
It does support ECC memory, though with the following caveats:**
6 x DIMM,
non-volatile.
I seem to recall mention that the dedicated zil is only used if it's
needed.
I have great performance from a FC target using 3 x SAT2-MV8 and 20 x
2Tb sata disks without an ssd zil.
Mark.
___
OpenIndiana-discuss mailing list
the
data, and then write it back which in most cases triggers a disk bad
sector replacement and the problem is sorted quickly.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo
: No such device or address
Has anyone had luck getting the BMC driver to work with SM boards?
I have run the bmc from the last nvs release on OpenSolaris on a
Supermicro and it works fine.
I used the SIMSO+ on a X7DWN.
I haven't tried the newer onboard Realtec chipsets yet.
Mark
On Mon, Oct 31, 2011 at 12:54 PM, Mark Humphreys saskal...@gmail.comwrote:
I'm seeing freezing issues doing 3-way mirrors across mainboard ICH10R (6
SATA 150/300 ports), and two SYBA SY-PEX-40008 cards (4 Port Internal SATA
II ports).
Is there an issue with the si3124 (Sil3124) driver
other zpools.
I have moved between supported sata and sas controllers as well.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
defaults, and nfs3 and 4 also will produce
different results, since one knows ACL's and one doesn't.
I just run a cron job to bash them back into what I want.
I'd go with a simple approach that works for you.
I haven't seen any major performance difference between cifs and nfs.
Mark
on the same file system as I do.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
hold water for modern solaris and offshoots.
If you can wait a few days, I can give you working configs for nfs4 on
Centos to OI, since I have a few running that config at work.
I seem to recall that only a few settings are needed to make it all work.
Mark
for a system dump? It would be nice to confirm it is
actually the storage system at fault.
Best Regards,
--
.\\ark
Mark Humphreys
Regina, SK, Canada
P.S. - Link to the SYBA HBA specifications (
http://www.sybausa.com/productInfo.php?iid=537
the available space.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
On Sun, Oct 16, 2011 at 6:49 PM, Robar Philip philip.ro...@gmail.comwrote:
Notice though that its 8 cores are not a win for builds, whereas the build
test is one of the few tests where the core i7 2600K really separates itself
from the rest of the pack—being almost 30% faster than its nearest
When deploying Webstack 1.6 on Solaris 10, I found a similar issue with
making directories in the /var/run file system, after reboot. To secure the
application, I had changed apache2 to run as the webservd user/role (the
main process was previously kicked-off as root), and consequently it could
option which is missing from the
repository version.
I plan to compile the latest version and test it on a few storage
combinations to see if the magic happens.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http
Funny, after doing the upgrade you get:
---
NOTE: Please review release notes posted at:
http://docs.sun.com/doc/821-1479
---
On 14/09/2011, at 7:38
the same.
The 24 x Seagate 6Gb 2Tb SATA disks I had that wouldn't work with
expanders are now a solid FC target box via multiple Marvel 8 port PCI-X
cards direct to each disk.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss
On Tue, Aug 16, 2011 at 8:36 AM, Christopher Chan
christopher.c...@bradbury.edu.hk wrote:
On Tuesday, August 16, 2011 02:33 PM, Alexander Pyhalov wrote:
On 08/16/2011 10:00, Dave Koelmeyer wrote:
For those that haven't already seen:
1 - 100 of 144 matches
Mail list logo
