Hi,
Please do not top-post in the future.
On Wed, Mar 05, 2014 at 11:57:52PM +0100, Angelo Dureghello wrote:
> Could be an issue the fact i am not using JTRST cpu pin ?
Unlikely, STM32s are known to be sane enough, and they do not really
need TRST for anything.
> I don't see any short or bad so
Hi Paul,
many thanks,
about the parallel interface, i used it some other times, to program
some other
cortex m cpu's, i tuned a bit the parport.cfg and always worked fine. So
i can
exclude issues of programmer interface or cables.
Could be an issue the fact i am not using JTRST cpu pin ?
I do
Hi,
On Wed, Mar 05, 2014 at 04:40:01PM +0100, Angelo Dureghello wrote:
> i tried to ask for help first in the sparkfun forum, but messages are blocked,
> they strangely have to be accepted by a moderator of the forum.
No wonder, web-forums suck.
> i am trying to program a stm32f405, just soldere
Dear All,
i tried to ask for help first in the sparkfun forum, but messages are
blocked,
they strangely have to be accepted by a moderator of the forum.
So i try here,
i am trying to program a stm32f405, just soldered on a custom board.
using
sudo openocd -f /usr/share/openocd/scripts/interf
