Committed.
Thanks!
--
Øyvind Harboe
Embedded software and hardware consulting services
http://consulting.zylin.com
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
Thanks guys! I recovered ... board is booting u-boot normal now. I'll
clean up my scripts for this board how to I submit them? Do I need to
make a patch against the /board /target directories or what?
Now I'll need to work on increasing the speed. Took about 1 1/2 hrs to burn
330k bin
On Fri, 2009-04-24 at 12:50 -0400, Brian Hutchinson wrote:
Thanks guys! I recovered ... board is booting u-boot normal now.
I'll clean up my scripts for this board how to I submit them? Do
I need to make a patch against the /board /target directories or
what?
Create patches from the
Create patches from the root of the tree, limit yourself to one logical
change per patch (as much as possible), remove superfluous whitespace,
etc.. See the PATCHES file for more information, and let me know if
(and how) you would like to see those instructions improved.
Cheers,
Zach
Hi,
I applied the patches that were recently posted for the SST flashes (my
board has SST39VF1601) and I can say they work! A big thank you!
I'm running SVN 1470M.
I've been able to use my JTAGkey to read/write flash but I flashed a bum
u-boot.bin and now I hosed the board and OpenOCD reports
Hi,
Anyone got experience with bringing up the AT91SAM9260 based boards
and know what the min init is? Can I use the working u-boot to probe
these registers and figure out the settings that way? The board came
with EasyICE (which is a parallel wiggler) and a software tool to
reflash
Edgar Grimberg schrieb:
Hi,
Anyone got experience with bringing up the AT91SAM9260 based boards
and know what the min init is? Can I use the working u-boot to probe
these registers and figure out the settings that way? The board came
with EasyICE (which is a parallel wiggler) and a
Try it with the attached configfile.
If it works, can you post it as a patch, so it will get committed?
Edgar
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
On Thu, 2009-04-23 at 17:41 +0200, R.Doss wrote:
Edgar Grimberg schrieb:
Hi,
Anyone got experience with bringing up the AT91SAM9260 based boards
and know what the min init is? Can I use the working u-boot to probe
these registers and figure out the settings that way? The