Re: [opensuse-arm] ARM JeOS for software.opensuse.org
пн, 9 мар. 2020 г. в 11:55, Guillaume Gardet : > > Hi, > > > > -Original Message- > > From: Matwey V. Kornilov > > Sent: 04 March 2020 18:05 > > To: Matthias Brugger > > Cc: opensuse-arm@opensuse.org > > Subject: Re: [opensuse-arm] ARM JeOS for software.opensuse.org > > > > ср, 4 мар. 2020 г. в 19:23, Matthias Brugger : > > > > > > > > > > > > On 04/03/2020 16:56, Matwey V. Kornilov wrote: > > > > ср, 4 мар. 2020 г. в 18:52, Matthias Brugger : > > > >> > > > >> > > > >> > > > >> On 03/03/2020 17:54, Matwey V. Kornilov wrote: > > > >>> вт, 3 мар. 2020 г. в 19:39, Matthias Brugger : > > > >>>> > > > >>>> Hi Matwey, > > > >>>> > > > >>>> On 03/03/2020 17:23, Matwey V. Kornilov wrote: > > > >>>>> Hello, > > > >>>>> > > > >>>>> I think it would be great to have something like that > > > >>>>> https://ubuntu.com/download/raspberry-pi on > > > >>>>> https://software.opensuse.org/distributions/tumbleweed page. For > > > >>>>> few boards with good support. > > > >>>>> Currently, information about RPi support is hidden in the internals > > > >>>>> of > > Wiki. > > > >>>>> > > > >>>>> I asked this once in the past, but this idea had no support at > > > >>>>> that moment. What do you think now? > > > >>>>> > > > >>>> > > > >>>> I think this is a good idea. We should make more noise about the > > > >>>> things > > we do. > > > >>>> Support for board is too much hidden. We should carefully select > > > >>>> a few boards (e.g. Leap supported) to announce them more broadly. > > > >>>> > > > >>>> Regards, > > > >>>> Matthias > > > >>> > > > >>> From my side, I would say that BeagleBone Black has a good support > > > >>> level. Almost all hardware are working, except PRUs, and > > > >>> isochronous USB transfer for MUSB host controller is sometimes buggy. > > > >>> I am trying to fix the latter in upstream Linux kernel, but no big > > > >>> success yet. MUSB maintainers just silently ignore my patches for > > > >>> some reason... > > > >>> > > > >> > > > >> That's not leap supported, right? That's not mandatory. We can also > > > >> decide to publish some boards people are actually using and happy > > > >> to test + debug. What we should try to avoid, is to promote boards > > > >> that then later doesn't get enough love and get stale. > > > > > > > > It is currently supported in Leap: > > > > https://download.opensuse.org/ports/armv7hl/distribution/leap/15.1/a > > > > ppliances/openSUSE-Leap-15.1-ARM-JeOS-beaglebone.armv7l.raw.xz > > > > > > > > > > My bad, I wasn't aware we still have openSUSE Leap on armv7. > > > > > > > I am running Leap 15.0/15.1 on BeagleBones in prod. > > > > But you are right here, I have never tested graphical interface > > > > images for this board. > > > > > > > > > > Would be a good time to test 15.2 then :) > > > > It boots and still says that it is alpha... > > PRETTY_NAME="openSUSE Leap 15.2 Alpha" > > It should not. The problem atm is Leap 15.2 ARM images are in 2 places: > * > http://download.opensuse.org/ports/aarch64/distribution/leap/15.2/appliances/ > which is outdated > * http://download.opensuse.org/ports/aarch64/distribution/leap/15.2/live/ > with latest release. You are right. The latter is PRETTY_NAME="openSUSE Leap 15.2 Beta" > > Adrian is aware. > > Cheers, > Guillaume > > > > > > > > -- > > With best regards, > > Matwey V. Kornilov > > -- > > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. -- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
RE: [opensuse-arm] ARM JeOS for software.opensuse.org
Hi, > -Original Message- > From: Matwey V. Kornilov > Sent: 04 March 2020 18:05 > To: Matthias Brugger > Cc: opensuse-arm@opensuse.org > Subject: Re: [opensuse-arm] ARM JeOS for software.opensuse.org > > ср, 4 мар. 2020 г. в 19:23, Matthias Brugger : > > > > > > > > On 04/03/2020 16:56, Matwey V. Kornilov wrote: > > > ср, 4 мар. 2020 г. в 18:52, Matthias Brugger : > > >> > > >> > > >> > > >> On 03/03/2020 17:54, Matwey V. Kornilov wrote: > > >>> вт, 3 мар. 2020 г. в 19:39, Matthias Brugger : > > >>>> > > >>>> Hi Matwey, > > >>>> > > >>>> On 03/03/2020 17:23, Matwey V. Kornilov wrote: > > >>>>> Hello, > > >>>>> > > >>>>> I think it would be great to have something like that > > >>>>> https://ubuntu.com/download/raspberry-pi on > > >>>>> https://software.opensuse.org/distributions/tumbleweed page. For > > >>>>> few boards with good support. > > >>>>> Currently, information about RPi support is hidden in the internals of > Wiki. > > >>>>> > > >>>>> I asked this once in the past, but this idea had no support at > > >>>>> that moment. What do you think now? > > >>>>> > > >>>> > > >>>> I think this is a good idea. We should make more noise about the things > we do. > > >>>> Support for board is too much hidden. We should carefully select > > >>>> a few boards (e.g. Leap supported) to announce them more broadly. > > >>>> > > >>>> Regards, > > >>>> Matthias > > >>> > > >>> From my side, I would say that BeagleBone Black has a good support > > >>> level. Almost all hardware are working, except PRUs, and > > >>> isochronous USB transfer for MUSB host controller is sometimes buggy. > > >>> I am trying to fix the latter in upstream Linux kernel, but no big > > >>> success yet. MUSB maintainers just silently ignore my patches for > > >>> some reason... > > >>> > > >> > > >> That's not leap supported, right? That's not mandatory. We can also > > >> decide to publish some boards people are actually using and happy > > >> to test + debug. What we should try to avoid, is to promote boards > > >> that then later doesn't get enough love and get stale. > > > > > > It is currently supported in Leap: > > > https://download.opensuse.org/ports/armv7hl/distribution/leap/15.1/a > > > ppliances/openSUSE-Leap-15.1-ARM-JeOS-beaglebone.armv7l.raw.xz > > > > > > > My bad, I wasn't aware we still have openSUSE Leap on armv7. > > > > > I am running Leap 15.0/15.1 on BeagleBones in prod. > > > But you are right here, I have never tested graphical interface > > > images for this board. > > > > > > > Would be a good time to test 15.2 then :) > > It boots and still says that it is alpha... > PRETTY_NAME="openSUSE Leap 15.2 Alpha" It should not. The problem atm is Leap 15.2 ARM images are in 2 places: * http://download.opensuse.org/ports/aarch64/distribution/leap/15.2/appliances/ which is outdated * http://download.opensuse.org/ports/aarch64/distribution/leap/15.2/live/ with latest release. Adrian is aware. Cheers, Guillaume > > > -- > With best regards, > Matwey V. Kornilov > -- > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Re: [opensuse-arm] ARM JeOS for software.opensuse.org
ср, 4 мар. 2020 г. в 19:23, Matthias Brugger : > > > > On 04/03/2020 16:56, Matwey V. Kornilov wrote: > > ср, 4 мар. 2020 г. в 18:52, Matthias Brugger : > >> > >> > >> > >> On 03/03/2020 17:54, Matwey V. Kornilov wrote: > >>> вт, 3 мар. 2020 г. в 19:39, Matthias Brugger : > > Hi Matwey, > > On 03/03/2020 17:23, Matwey V. Kornilov wrote: > > Hello, > > > > I think it would be great to have something like that > > https://ubuntu.com/download/raspberry-pi on > > https://software.opensuse.org/distributions/tumbleweed page. For few > > boards with good support. > > Currently, information about RPi support is hidden in the internals of > > Wiki. > > > > I asked this once in the past, but this idea had no support at that > > moment. What do you think now? > > > > I think this is a good idea. We should make more noise about the things > we do. > Support for board is too much hidden. We should carefully select a few > boards > (e.g. Leap supported) to announce them more broadly. > > Regards, > Matthias > >>> > >>> From my side, I would say that BeagleBone Black has a good support > >>> level. Almost all hardware are working, except PRUs, and isochronous > >>> USB transfer for MUSB host controller is sometimes buggy. > >>> I am trying to fix the latter in upstream Linux kernel, but no big > >>> success yet. MUSB maintainers just silently ignore my patches for some > >>> reason... > >>> > >> > >> That's not leap supported, right? That's not mandatory. We can also decide > >> to > >> publish some boards people are actually using and happy to test + debug. > >> What we > >> should try to avoid, is to promote boards that then later doesn't get > >> enough > >> love and get stale. > > > > It is currently supported in Leap: > > https://download.opensuse.org/ports/armv7hl/distribution/leap/15.1/appliances/openSUSE-Leap-15.1-ARM-JeOS-beaglebone.armv7l.raw.xz > > > > My bad, I wasn't aware we still have openSUSE Leap on armv7. > > > I am running Leap 15.0/15.1 on BeagleBones in prod. > > But you are right here, I have never tested graphical interface images > > for this board. > > > > Would be a good time to test 15.2 then :) It boots and still says that it is alpha... PRETTY_NAME="openSUSE Leap 15.2 Alpha" -- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] ARM JeOS for software.opensuse.org
On 04/03/2020 16:56, Matwey V. Kornilov wrote: > ср, 4 мар. 2020 г. в 18:52, Matthias Brugger : >> >> >> >> On 03/03/2020 17:54, Matwey V. Kornilov wrote: >>> вт, 3 мар. 2020 г. в 19:39, Matthias Brugger : Hi Matwey, On 03/03/2020 17:23, Matwey V. Kornilov wrote: > Hello, > > I think it would be great to have something like that > https://ubuntu.com/download/raspberry-pi on > https://software.opensuse.org/distributions/tumbleweed page. For few > boards with good support. > Currently, information about RPi support is hidden in the internals of > Wiki. > > I asked this once in the past, but this idea had no support at that > moment. What do you think now? > I think this is a good idea. We should make more noise about the things we do. Support for board is too much hidden. We should carefully select a few boards (e.g. Leap supported) to announce them more broadly. Regards, Matthias >>> >>> From my side, I would say that BeagleBone Black has a good support >>> level. Almost all hardware are working, except PRUs, and isochronous >>> USB transfer for MUSB host controller is sometimes buggy. >>> I am trying to fix the latter in upstream Linux kernel, but no big >>> success yet. MUSB maintainers just silently ignore my patches for some >>> reason... >>> >> >> That's not leap supported, right? That's not mandatory. We can also decide to >> publish some boards people are actually using and happy to test + debug. >> What we >> should try to avoid, is to promote boards that then later doesn't get enough >> love and get stale. > > It is currently supported in Leap: > https://download.opensuse.org/ports/armv7hl/distribution/leap/15.1/appliances/openSUSE-Leap-15.1-ARM-JeOS-beaglebone.armv7l.raw.xz > My bad, I wasn't aware we still have openSUSE Leap on armv7. > I am running Leap 15.0/15.1 on BeagleBones in prod. > But you are right here, I have never tested graphical interface images > for this board. > Would be a good time to test 15.2 then :) -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] ARM JeOS for software.opensuse.org
ср, 4 мар. 2020 г. в 18:52, Matthias Brugger : > > > > On 03/03/2020 17:54, Matwey V. Kornilov wrote: > > вт, 3 мар. 2020 г. в 19:39, Matthias Brugger : > >> > >> Hi Matwey, > >> > >> On 03/03/2020 17:23, Matwey V. Kornilov wrote: > >>> Hello, > >>> > >>> I think it would be great to have something like that > >>> https://ubuntu.com/download/raspberry-pi on > >>> https://software.opensuse.org/distributions/tumbleweed page. For few > >>> boards with good support. > >>> Currently, information about RPi support is hidden in the internals of > >>> Wiki. > >>> > >>> I asked this once in the past, but this idea had no support at that > >>> moment. What do you think now? > >>> > >> > >> I think this is a good idea. We should make more noise about the things we > >> do. > >> Support for board is too much hidden. We should carefully select a few > >> boards > >> (e.g. Leap supported) to announce them more broadly. > >> > >> Regards, > >> Matthias > > > > From my side, I would say that BeagleBone Black has a good support > > level. Almost all hardware are working, except PRUs, and isochronous > > USB transfer for MUSB host controller is sometimes buggy. > > I am trying to fix the latter in upstream Linux kernel, but no big > > success yet. MUSB maintainers just silently ignore my patches for some > > reason... > > > > That's not leap supported, right? That's not mandatory. We can also decide to > publish some boards people are actually using and happy to test + debug. What > we > should try to avoid, is to promote boards that then later doesn't get enough > love and get stale. It is currently supported in Leap: https://download.opensuse.org/ports/armv7hl/distribution/leap/15.1/appliances/openSUSE-Leap-15.1-ARM-JeOS-beaglebone.armv7l.raw.xz I am running Leap 15.0/15.1 on BeagleBones in prod. But you are right here, I have never tested graphical interface images for this board. > > Regards, > Matthias -- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] ARM JeOS for software.opensuse.org
On 03/03/2020 17:54, Matwey V. Kornilov wrote: > вт, 3 мар. 2020 г. в 19:39, Matthias Brugger : >> >> Hi Matwey, >> >> On 03/03/2020 17:23, Matwey V. Kornilov wrote: >>> Hello, >>> >>> I think it would be great to have something like that >>> https://ubuntu.com/download/raspberry-pi on >>> https://software.opensuse.org/distributions/tumbleweed page. For few >>> boards with good support. >>> Currently, information about RPi support is hidden in the internals of Wiki. >>> >>> I asked this once in the past, but this idea had no support at that >>> moment. What do you think now? >>> >> >> I think this is a good idea. We should make more noise about the things we >> do. >> Support for board is too much hidden. We should carefully select a few boards >> (e.g. Leap supported) to announce them more broadly. >> >> Regards, >> Matthias > > From my side, I would say that BeagleBone Black has a good support > level. Almost all hardware are working, except PRUs, and isochronous > USB transfer for MUSB host controller is sometimes buggy. > I am trying to fix the latter in upstream Linux kernel, but no big > success yet. MUSB maintainers just silently ignore my patches for some > reason... > That's not leap supported, right? That's not mandatory. We can also decide to publish some boards people are actually using and happy to test + debug. What we should try to avoid, is to promote boards that then later doesn't get enough love and get stale. Regards, Matthias -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] ARM JeOS for software.opensuse.org
вт, 3 мар. 2020 г. в 19:39, Matthias Brugger : > > Hi Matwey, > > On 03/03/2020 17:23, Matwey V. Kornilov wrote: > > Hello, > > > > I think it would be great to have something like that > > https://ubuntu.com/download/raspberry-pi on > > https://software.opensuse.org/distributions/tumbleweed page. For few > > boards with good support. > > Currently, information about RPi support is hidden in the internals of Wiki. > > > > I asked this once in the past, but this idea had no support at that > > moment. What do you think now? > > > > I think this is a good idea. We should make more noise about the things we do. > Support for board is too much hidden. We should carefully select a few boards > (e.g. Leap supported) to announce them more broadly. > > Regards, > Matthias >From my side, I would say that BeagleBone Black has a good support level. Almost all hardware are working, except PRUs, and isochronous USB transfer for MUSB host controller is sometimes buggy. I am trying to fix the latter in upstream Linux kernel, but no big success yet. MUSB maintainers just silently ignore my patches for some reason... -- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] ARM JeOS for software.opensuse.org
Hi Matwey, On 03/03/2020 17:23, Matwey V. Kornilov wrote: > Hello, > > I think it would be great to have something like that > https://ubuntu.com/download/raspberry-pi on > https://software.opensuse.org/distributions/tumbleweed page. For few > boards with good support. > Currently, information about RPi support is hidden in the internals of Wiki. > > I asked this once in the past, but this idea had no support at that > moment. What do you think now? > I think this is a good idea. We should make more noise about the things we do. Support for board is too much hidden. We should carefully select a few boards (e.g. Leap supported) to announce them more broadly. Regards, Matthias -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
