The other thing that's always driven me crazy is that the client needs
to have the "run as administrator" bit set, and it doesn't happen by
default.
/jordan
___
Openvpn-users mailing list
Openvpn-users@lists.sourceforge.net
>Why would anyone want that?
This is the least useful answer you could give.
How about: it's a condition of my parole?
It's none of your business why someone might want to use the tool in
this way. Can you do it or not?
That's the only question you're being asked.
It's super annoying to
> Any tips as to how I can configure my client-side config file to
prevent IPv6 routes from being added during the connections?
One trick to doing this on a Windows client is to open the adapter and
deselect IPv6 support.
___
Openvpn-users mailing
Check your config file; what level are you logging at?
I think the default is often "verb 3" ... try a lower number.
/jordan
--
___
Openvpn-users mailing list
I have a (Windows) client that uses a OpenVPN to project an outside
address (on a Linux server), by using the tunnel as its default route.
In the client ccd file, I have this:
-
ifconfig-push 10.12.0.45 10.12.0.46
push redirect-gateway
-
And I have iptables set to do the right thing
max.mus...@kaffeeschluerfer.com writes:
If you want to reach the server from IP 1.2.3.4 the server
will need to now where toroute this IP ;-)
So in a simple config, the server would only need:
route 1.2.3.4
Ok, I added that to the server.
you will also need an iroute entry for your
I have a simple Linux OpenVPN client with the following interfaces:
eth01.2.3.4
tun010.0.0.5
The server side of the tunnel is 10.0.0.1 ...
From the client, I can ping the server:
% ping -c 3 10.0.0.1
PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
64 bytes from 10.0.0.1: icmp_seq=0
