On Thu, 17 Apr 2014, Gerry Rozema wrote:
On 17/04/14 07:54 PM, Matthew Fatheree wrote:
I can acknowledge that this process is ongoing, and our engagement with
OpenWRT is not yet complete.
From the sounds of most of the folks who are OpenWRT, it's not ongoing
because it never started.
My
Hi,
i just merged the mac80211 rt3883 patches that gabor created.
please send your thank you messages his way.
i tested the driver on rt3883, rt3052 and rt5350 to make sure there
are no regressions breaking other SoCs but more testing is welcome.
if you use ralink SoC please test mac80211
Just a little typo in the description, see below.
Daniel schrieb:
support for opentracker was suggested in ticket #7023
it's much tighter than cbtt and got only 20% of cbtt's binary size
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
net/opentracker/Makefile | 51
On 23/04/2014 10:44, Hartmut Knaack wrote:
+stop() {
+service_stop $PROG +}
this bit is redundant
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
allows to set additional options for masquerading rules
via new option extra_masq.
Useful e.g. for not NATing VPN traffic with:
option 'extra_masq' '-m policy --dir out --pol none'
Signed-off-by: Ulrich Weber u...@ocedo.com
---
options.h | 1 +
zones.c | 2 ++
2 files changed, 3 insertions(+)
This Patch removes the IPv4 only limitation for NAT.
IPv6 NAT support was added in Linux Kernel 3.7 and iptables 1.4.17
Signed-off-by: Ulrich Weber u...@ocedo.com
---
defaults.c | 8
zones.c| 13 -
2 files changed, 12 insertions(+), 9 deletions(-)
diff --git
ping
there is probably no x86_64 bit system out there without PCI Express... :)
On 02/27/2014 12:13 PM, Ulrich Weber wrote:
enable PCI Express support for x86_64 target
Signed-off-by: Ulrich Weber u...@xyne.com
---
target/linux/x86_64/config-default | 2 ++
1 file changed, 2 insertions(+)
Quick update on this subject: Linksys has now posted a GPL source for
the WRT1900AC, and it contains the wifi driver sources.
It appears to me, that this driver was properly licensed under GPL, with
proper license headers in all source files.
This means that work on supporting this device can
On 2014-04-23 11:31, Felix Fietkau wrote:
Quick update on this subject: Linksys has now posted a GPL source for
the WRT1900AC, and it contains the wifi driver sources.
It appears to me, that this driver was properly licensed under GPL, with
proper license headers in all source files.
This
On Wed, Apr 23, 2014 at 10:59:46AM +0200, John Crispin wrote:
On 23/04/2014 10:44, Hartmut Knaack wrote:
+stop() {
+ service_stop $PROG +}
this bit is redundant
If it is, can you please update:
http://wiki.openwrt.org/doc/devel/packages#packaging.a.service
It would be fantastic
On 23/04/2014 12:16, Karl Palsson wrote:
On Wed, Apr 23, 2014 at 10:59:46AM +0200, John Crispin wrote:
On 23/04/2014 10:44, Hartmut Knaack wrote:
+stop() {
+ service_stop $PROG +}
this bit is redundant
If it is, can you please update:
2014-04-23 11:40 GMT+02:00, Felix Fietkau n...@openwrt.org:
On 2014-04-23 11:31, Felix Fietkau wrote:
Quick update on this subject: Linksys has now posted a GPL source for
the WRT1900AC, and it contains the wifi driver sources.
It appears to me, that this driver was properly licensed under
2014-04-23 13:41 GMT+02:00, José Vázquez ppvazquez...@gmail.com:
2014-04-23 11:40 GMT+02:00, Felix Fietkau n...@openwrt.org:
On 2014-04-23 11:31, Felix Fietkau wrote:
Quick update on this subject: Linksys has now posted a GPL source for
the WRT1900AC, and it contains the wifi driver sources.
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
---
.gitignore |4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/.gitignore b/.gitignore
index 1bef86e..0892453 100644
--- a/.gitignore
+++ b/.gitignore
@@ -15,11 +15,9 @@
/files
/package/feeds
It was introduced in commit 2f966e8, base-files: add a post start hook
for procd managed services.
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
---
package/base-files/Makefile|2 +-
package/base-files/files/etc/rc.common |4
2 files changed, 1 insertions(+), 5
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
---
package/network/services/dnsmasq/Makefile | 16 +++-
.../network/services/dnsmasq/files/dnsmasq.init|5 +
2 files changed, 20 insertions(+), 1 deletions(-)
diff --git
This patch adds protocol support for PPP over SSH. The protocol name is
'pppossh' with the following options.
- sshserver, required, SSH server name
- sshport, SSH server port
- sshuser, required, SSH login username
- identityfile, required, client private key file.
- localip, local ip
I don't know if any of the OpenWRT developers or contributors have
this router. If yes, my opinion is to add support for the board using
the patches sent by Matthew Fatheree as base, reworking them and drop
wireless support for now until they (Marvell or Belkin) develop a
cfg80211 or mac80211
Hi.
I think you should reuse option names used by other protocols, we
already have far too much variation and abbreviation styles for common
option names - see my comments inline below.
This patch adds protocol support for PPP over SSH. The protocol name is
'pppossh' with the following
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
---
target/linux/ar71xx/image/Makefile | 22 +-
1 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index 8234f88..3cfd4c1 100644
---
Fix ARV7510PW22 etop.
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git a/target/linux/lantiq/dts/ARV7510PW22.dts
b/target/linux/lantiq/dts/ARV7510PW22.dts
index 0bddce7..24c396d 100644
--- a/target/linux/lantiq/dts/ARV7510PW22.dts
+++
Fix ARV4518 etop.
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dts
b/target/linux/lantiq/dts/ARV4518PWR01.dts
index 0007d9d..f2a2e18 100644
--- a/target/linux/lantiq/dts/ARV4518PWR01.dts
+++
On 23 April 2014 20:30, Jo-Philipp Wich j...@openwrt.org wrote:
Hi.
I think you should reuse option names used by other protocols, we
already have far too much variation and abbreviation styles for common
option names - see my comments inline below.
Thank you, jow. You are right on this.
* Yousong Zhou yszhou4t...@gmail.com [23.04.2014 14:53]:
once upon a time 36ea10375db186bf10c13d89bbdc4cfb62bf5fcc, the idea
was NOT to abort because e.g. the user builts for a whole arch and
only some images are too big. (see the warnings)
bye, bastian
Add ARV7510PW22 support.
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
It looks like the LZMA removed patch is needed, since the device will reboot
itself when trying to uncompress LZMA images without this patch.
https://dev.openwrt.org/changeset/40521
diff --git
interface name must be added to Link-local IPv6
DNS servers, otherwise they are unusable.
Signed-off-by: Ulrich Weber u...@ocedo.com
---
interface-ip.c | 12
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/interface-ip.c b/interface-ip.c
index d5a3832..6f42015 100644
Le 23/04/2014 14:59, Bastian Bittorf a écrit :
* Yousong Zhou yszhou4t...@gmail.com [23.04.2014 14:53]:
once upon a time 36ea10375db186bf10c13d89bbdc4cfb62bf5fcc, the idea
was NOT to abort because e.g. the user builts for a whole arch and
only some images are too big. (see the warnings)
Yes,
From: Jacek Kikiewicz ja...@aol.pl
Re-sending as previous did not get where it should.
I added WIFI LED support (so now AP blinks nicely), I removed WPS
button GPIO (as it doesn't exist) and changed GPIO for reset button.
Signed-off-by: Jacek Kikiewicz ja...@aol.pl
---
Index:
From: Jacek Kikiewicz ja...@aol.pl
Re-sending as previous did not get where it should.
I added WIFI LED support (so now AP blinks nicely), I removed WPS
button GPIO (as it doesn't exist) and changed GPIO for reset button.
Signed-off-by: Jacek Kikiewicz ja...@aol.pl
---
Index:
From: Jacek Kikiewicz ja...@aol.pl
Re-sending as previous did not get where it should.
I added WIFI LED support (so now AP blinks nicely), I removed WPS
button GPIO (as it doesn't exist) and changed GPIO for reset button.
Signed-off-by: Jacek Kikiewicz ja...@aol.pl
---
Index:
Hello,
Sorry for sending same patch few times, for some reason I cannot get it to
patchwork...
I configured my client to send plain text, there are no attachments, format
should be good...
Can someone advice what am I doing wrong here?
Thanks,
Jacek
Hi
On 23 April 2014 22:02, Jacek Kikiewicz ja...@aol.pl wrote:
Hello,
Sorry for sending same patch few times, for some reason I cannot get it to
patchwork...
I configured my client to send plain text, there are no attachments, format
should be good...
Can someone advice what am I doing
2014-04-23 14:27 GMT+02:00, Zoltan HERPAI wigy...@uid0.hu:
I don't know if any of the OpenWRT developers or contributors have
this router. If yes, my opinion is to add support for the board using
the patches sent by Matthew Fatheree as base, reworking them and drop
wireless support for now
From: Jacek Kikiewicz ja...@aol.pl
Re-sending as previous did not get where it should.
I added WIFI LED support (so now AP blinks nicely), I removed WPS
button GPIO (as it doesn't exist) and changed GPIO for reset button.
Signed-off-by: Jacek Kikiewicz ja...@aol.pl
---
Index:
On 23 April 2014 21:40, Michel Stempin michel.stem...@wanadoo.fr wrote:
Le 23/04/2014 14:59, Bastian Bittorf a écrit :
* Yousong Zhou yszhou4t...@gmail.com [23.04.2014 14:53]:
once upon a time 36ea10375db186bf10c13d89bbdc4cfb62bf5fcc, the idea
was NOT to abort because e.g. the user builts
Could someone please backport r38817 into AA?
Thanks!
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On Wed, Apr 23, 2014 at 10:24:07PM +0800, Yousong Zhou wrote:
On 23 April 2014 21:40, Michel Stempin michel.stem...@wanadoo.fr wrote:
Le 23/04/2014 14:59, Bastian Bittorf a écrit :
* Yousong Zhou yszhou4t...@gmail.com [23.04.2014 14:53]:
once upon a time
On 2014-04-23 14:30, Jo-Philipp Wich wrote:
Hi.
I think you should reuse option names used by other protocols, we
already have far too much variation and abbreviation styles for common
option names - see my comments inline below.
This patch adds protocol support for PPP over SSH. The
On 2014-04-23 14:16, Yousong Zhou wrote:
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
Why?
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On 23 April 2014 23:23, Felix Fietkau n...@openwrt.org wrote:
On 2014-04-23 14:16, Yousong Zhou wrote:
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
Why?
There are times when I apply patches with patch utility, some *.orig
and *.rej files will be generated in the tree and later copied in
Some fixes for Telsey CPVA502+ bcm6348 routers:
- reset the external PHY (eth1) with proper platform code, not using a led
definiton
- eth1 is an external phy, not a switch, deleted forced link speed
- fixed led color
Patch made for 3.14 kernel patches.
Signed-off-by: Daniel Gonzalez
On Fri, Feb 7, 2014 at 11:23 PM, Marco Antonio Mauro marcu...@gmail.com wrote:
This patch adds factory image building for the DGN3500, all variants,
and fixes sysupgrade images to make them play nice with the sercomm
secondary boot loader.
The factory images can be used directly in the update
Although it would be good to have this hardware supported aren't we all
forgetting something such as BETTER alternatives without extra work and
headaches ?
I have seen this router costing from $279 to a typical price of $352
and more which ends up for being close to 400 bucks after taxes
On 23/04/2014 19:28, Marco Antonio Mauro wrote:
On Fri, Feb 7, 2014 at 11:23 PM, Marco Antonio Mauro
marcu...@gmail.com wrote:
This patch adds factory image building for the DGN3500, all
variants, and fixes sysupgrade images to make them play nice with
the sercomm secondary boot loader.
From: Zachery Stoddard zacherystodd...@gmail.com
This patch fixes compilation failure for hostapd when using eglibc 2.15.
Patch is for BB but similar logic is required to get hostapd to compile in
AA.
Signed-off-by: Zachery Stoddard zacherystodd...@gmail.com
---
diff --git
On 07/02/2014 23:23, Marco Antonio Mauro wrote:
index 585090e..641c99d 100644 --- a/tools/firmware-utils/Makefile
+++ b/tools/firmware-utils/Makefile @@ -66,6 +66,7 @@ define
Host/Compile $(call cc,mkporayfw, -Wall) #$(call cc,mkhilinkfw,
-lcrypto) $(call cc,mkdcs932, -Wall) +
support for opentracker was suggested in ticket #7023
it's much tighter than cbtt and got only 20% of cbtt binary size
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
net/opentracker/Makefile | 54 ++
net/opentracker/files/opentracker.init
2014-04-23 13:41 GMT+02:00 José Vázquez ppvazquez...@gmail.com:
I don't know if any of the OpenWRT developers or contributors have
this router. If yes, my opinion is to add support for the board using
the patches sent by Matthew Fatheree as base, reworking them and drop
wireless support for
Ping tested, add a cool fix
https://github.com/cozybit/authsae/commit/295164a83717ce59ca280468fc2f7edcea6b3cbf
Signed-off-by: Etienne CHAMPETIER etienne.champet...@free.fr
---
package/network/services/authsae/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
On Wed, Apr 23, 2014 at 5:38 PM, Yousong Zhou yszhou4t...@gmail.com wrote:
On 23 April 2014 23:23, Felix Fietkau n...@openwrt.org wrote:
On 2014-04-23 14:16, Yousong Zhou wrote:
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
Why?
There are times when I apply patches with patch utility,
This patch adds support for building support for cramfs filesystems as a kernel
module.
Signed-off-by: Owen Kirby o...@exegin.com
---
package/kernel/linux/modules/fs.mk | 14 ++
1 file changed, 14 insertions(+)
diff --git a/package/kernel/linux/modules/fs.mk
This patch adds support for building the kernel modules for gadget serial
devices.
Signed-off-by: Owen Kirby o...@exegin.com
---
package/kernel/linux/modules/usb.mk | 26 ++
1 file changed, 26 insertions(+)
diff --git a/package/kernel/linux/modules/usb.mk
On 24 April 2014 04:54, Jonas Gorski j...@openwrt.org wrote:
On Wed, Apr 23, 2014 at 5:38 PM, Yousong Zhou yszhou4t...@gmail.com wrote:
On 23 April 2014 23:23, Felix Fietkau n...@openwrt.org wrote:
On 2014-04-23 14:16, Yousong Zhou wrote:
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
Why?
It was introduced in commit 2f966e8, base-files: add a post start hook
for procd managed services.
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
---
package/base-files/Makefile|2 +-
package/base-files/files/etc/rc.common |4
2 files changed, 1 insertions(+), 5
Signed-off-by: Yousong Zhou yszhou4t...@gmail.com
---
v1 - v2
- Incremented PKG_RELEASE.
package/network/services/dnsmasq/Makefile | 18 --
.../network/services/dnsmasq/files/dnsmasq.init|5 +
2 files changed, 21 insertions(+), 2 deletions(-)
diff
This patch adds protocol support for PPP over SSH. The protocol name is
'pppossh' with the following options.
- server, required, SSH server name.
- port, SSH server port.
- sshuser, required, SSH login username.
- identity, client private key file. Default to ~/.ssh/id_{rsa,dsa}.
It
This patch adds protocol support for PPP over SSH. The protocol name is
'pppossh' with the following options.
- server, required, SSH server name.
- port, SSH server port.
- sshuser, required, SSH login username.
- identity, client private key file. Default to ~/.ssh/id_{rsa,dsa}.
It
In the lights of the heartbeat bug and what is affected due to it as
well as looking for reducing built firmware image size i am looking to
use polarssl the same way barrier breaker development series uses
PolarSSL for some packages as support exists if i am not mistaken
In my specific case there
58 matches
Mail list logo
