On 29/04/2015 10:13, Steven Barth wrote:
Looks good and applies. Usually the Signed-off-by is at the end of the commit
message though.
Understood. Happy :-)
smime.p7s
Description: S/MIME Cryptographic Signature
___
openwrt-devel mailing list
Status report: spent lots of time trying to figure out how to use cpu
port 8 and use vlan1ports 0 1 2 3 5 7 8t, and found that I got fooled
by the way I tried to determine if it was working or not. To see if the
switch configuration was working I used to type ifconfig and then
see if there
Created some more logging, it is probably a configuration error
in the switch when port 8 is part of the vlan configuration. It
appears there is an offset in the data being received by bgmac,
strangely enough, the log appears to show valid data, but that
data is not accepted while the working
On 29 April 2015 at 12:51, Hante Meuleman meule...@broadcom.com wrote:
Status report: spent lots of time trying to figure out how to use cpu
port 8 and use vlan1ports 0 1 2 3 5 7 8t, and found that I got fooled
by the way I tried to determine if it was working or not. To see if the
switch
Sorry, beat you again by 20 minutes :P
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On Wed, Apr 29, 2015 at 11:26 AM, Christian Mehlis christ...@m3hlis.de wrote:
On plug/unplug I get those events:
[ 25.12] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
[ 37.13] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is down
but the linux network stack
Looks good and applies. Usually the Signed-off-by is at the end of the
commit message though.
Cheers,
Steven
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Am 28.04.2015 um 22:10 schrieb Heiner Kallweit:
It was easier than I thought, here comes the related patch.
Known limitations:
1. The patch supports configuration of this bit for platform-data-configured
platforms only. DT-based platforms would need a similar extension.
2. For now it's for
Bump dnsmasq to v2.73rc7
Fixes DNSSEC over TCP issue
Also include patch from dnsmasq upstream to include RRSIG RR replies in ANY
queries
Signed-off-by: Kevin Darbyshire-Bryant ke...@darbyshire-bryant.me.uk
Tested Archer C7
Maybe I even get this one right :-)
diff --git
On 29/04/2015 09:17, Steven Barth wrote:
Sorry, beat you again by 20 minutes :P
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
ROFL - I *should* give up, but I won't
In netifd transmit and receive packet steering is enabled by default since
commit
20510bd. This default setting gives problems on our architecture as real time
threads are used for networking.
The transmit/receive packet steering will move some of the work to softirq which
has higher prio than
Thanks, that explains. Also found some code in proprietary driver
which appears to correct the header in certain situations, but it is
rather complex. But what it appears to be is that there should be
a vlan tag, but there isn’t always. And when there isn’t it should be
inserted. But the
Moved board to the right magic case.
Signed-off-by: Christian Mehlis christ...@m3hlis.de
---
target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
On Tue, 2015-04-07 at 00:00 +0200, Martin Blumenstingl wrote:
Feel free to send me the details how to get more versions into this
list (please be aware that I need a link to a public hosted file that
*everyone* can download).
You can run the w921v_fw_cutter also on newer firmware for that,
Hello guys,
It's been over 3 months since Raspberry PI 2 (brcm2708/bcm2709) target was
added.
I requested Travis a buildbot over a month ago but my email wasn't responded.
So, can we have a buildbot please :D?
Regards,
Álvaro.
___
openwrt-devel
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.
Building the loader in Image/Build/TPLINK-SAFELOADER would break the image
builder as no target compiler is available in that stage.
Fixes #19580
Signed-off-by: Matthias Schiffer mschif...@universe-factory.net
---
target/linux/ar71xx/image/Makefile | 8 ++--
1 file changed, 2 insertions(+),
I still have to adjust it to make handling of the new platform
parameter more consistent with general handling of platform data.
Most likely I can submit the final patch by today.
Rgds, Heiner
On Wed, Apr 29, 2015 at 4:16 PM, Christian Mehlis christ...@m3hlis.de wrote:
Am 28.04.2015 um 22:10
Am 28.04.2015 um 22:10 schrieb Heiner Kallweit:
It was easier than I thought, here comes the related patch.
do you plan to send this as a patch to make the change available for
everyone, or should I?
Best
Christian
___
openwrt-devel mailing list
Signed-off-by: Matthias Schiffer mschif...@universe-factory.net
---
.../101-NET-add-of_get_mac_address_mtd.patch | 76 ++
.../102-net-gianfar-use-mtd-mac-address.patch | 19 ++
2 files changed, 95 insertions(+)
create mode 100644
This also changes the MAC address to one of the adresses actually used by the
stock firmware on one of the ethernet interfaces.
Signed-off-by: Matthias Schiffer mschif...@universe-factory.net
---
target/linux/mpc85xx/base-files/etc/uci-defaults/02_network| 2 --
The Antminer S1 and S3 use a controller with a modified version of
OpenWRT which has a single ethernet port and a wifi antenna header.
This is the patch from their GPL source release which appears to break
support for the tl-wr741nd-v4 in order to support their board. What
would be the proper way
22 matches
Mail list logo
