Al 26/02/11 22:44, En/na Luca Olivetti ha escrit:
Maybe the vendor WLAN driver allowed override of the regdomain on
commandline.
Have you got access to any source code from the vendor of your device
(similar to the Linksys GPL tarballs etc.)?
Nope, the device uses a closed source crappy
Hi Luca,
I have the same problem with my WAG160Nv2: Broadcom 6358 SoC with Atheros
AR9223 and calibration data
in the flash (unfortunately overwritten by my first boot of OpenWRT).
On 12/08/2010 12:53 PM, Luca Olivetti wrote:
Al 05/12/10 15:38, En/na Luca Olivetti ha escrit:
Since the
Al 26/02/11 22:15, En/na Joerg Albert ha escrit:
On 02/26/2011 06:21 PM, Luca Olivetti wrote:
Al 26/02/11 17:22, En/na Luca Olivetti ha escrit:
Yes, I also have two areas beginning with 0xa5 0x5a, maybe you're right,
the first one is just
for the pci fixup and the second one is the real
Al 05/12/10 15:38, En/na Luca Olivetti ha escrit:
This router has an ar9223, with the calibration data stored in flash. I
copied the data in ath9k_platform_data (btw, I noticed that ar71xx
redefines it adding fields, should I copy the .h to my platform or is
there a better way to avoid
Al 04/12/10 15:42, En/na Luca Olivetti ha escrit:
Al 21/11/10 19:19, En/na Luca Olivetti ha escrit:
Now that I have wired ethernet working, I'm tackling the wifi chip.
This router has an ar9223, with the calibration data stored in flash. I
copied the data in ath9k_platform_data (btw, I noticed
Al 05/12/10 12:53, En/na Luca Olivetti ha escrit:
Al 04/12/10 15:42, En/na Luca Olivetti ha escrit:
Al 21/11/10 19:19, En/na Luca Olivetti ha escrit:
Now that I have wired ethernet working, I'm tackling the wifi chip.
This router has an ar9223, with the calibration data stored in flash. I
Al 21/11/10 19:19, En/na Luca Olivetti ha escrit:
Now that I have wired ethernet working, I'm tackling the wifi chip.
This router has an ar9223, with the calibration data stored in flash. I
copied the data in ath9k_platform_data (btw, I noticed that ar71xx
redefines it adding fields, should I
Now that I have wired ethernet working, I'm tackling the wifi chip.
This router has an ar9223, with the calibration data stored in flash. I
copied the data in ath9k_platform_data (btw, I noticed that ar71xx
redefines it adding fields, should I copy the .h to my platform or is
there a better