Hello!
I'm curious if there is some magic way of testing uClibc patches
without distcleaning and rebuilding everything?
Regards,
Roman
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On Fri, May 18, 2012 at 1:04 AM, Tobias Diedrich
ranma+open...@tdiedrich.de wrote:
rt2800: Initialize max_txpower to MAX_G_TXPOWER and MAX_A_TXPOWER
respectively, similar to how it is already done in rt2[45]00pci.c
rt2800lib.c doesn't initialize max_power and thus after
On 21/05/12 22:14, Spyridon Tompros wrote:
On 21/05/2012 18:16, John Crispin wrote:
On 21/05/12 17:48, Spyridon Tompros wrote:
Hi all,
currently we test our last left-for-testing xDSL interface. The Danube
tries to synchronise but without result. Might be a SW problem of the
OpenWRT trunk
PeerVPN (http://www.peervpn.net/), by Tobias Volk, is software that
builds virtual ethernet networks between multiple computers. A virtual
network built by PeerVPN uses a full mesh topology. All nodes talk
directly to each other, there is no need for a central server. If one
node goes down, the
On Tue, May 22, 2012 at 4:56 PM, Dan VerWeire dverwe...@gmail.com wrote:
PeerVPN (http://www.peervpn.net/), by Tobias Volk, is software that
If Node A is behind a NAT device, you will have to forward port 7000.
You still need a public ip address and access to your router, which is
not available
On Tue, May 22, 2012 at 12:07 PM, Benjamin Henrion b...@udev.org wrote:
If Node A is behind a NAT device, you will have to forward port 7000.
You still need a public ip address and access to your router, which is
not available on most 3G connexions and not accessible for grandma.
I am not
i got a box ready to participate in as a buildbot slave.
it's a brand-new CentOS x86_64 install and I made sure all build-dependencies
are present.
please advise me on how it can serve the buildbot, it's waiting :)
___
openwrt-devel mailing list
Last I'd heard travis was off on a well deserved vacation... as am I.
snapon.lab.bufferbloat.net can also be tossed into the buildbot system.
It's a 6 core box, but only has a single drive.
Does anyone else have a grip on the buildbot system?
On Tue, May 22, 2012 at 6:36 PM, Daniel Golle
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sounds like a useful package for special purposes, so from me +1
Michael
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
On Tue, May 22, 2012 at 6:35 PM, Dan VerWeire dverwe...@gmail.com wrote:
On Tue, May 22, 2012 at 12:07 PM, Benjamin Henrion b...@udev.org wrote:
If Node A is behind a NAT device, you will have to forward port 7000.
You still need a public ip address and access to your router, which is
not
Add basic configuration for new board ZTE H201L. Still missing are
button and led gpio values.
Signed-off-by: Luka Perkov open...@lukaperkov.net
---
target/linux/lantiq/ar9/config-default |1 +
target/linux/lantiq/ar9/profiles/006-zte.mk|7 ++
On Wed, 2012-05-23 at 01:10 +0200, Luka Perkov wrote:
Leds gpio values have changed since initial patch was contributed. I
have double checked and this are correct values.
This also enables uboot_env partition.
And moves the linux partition, and removes the config partition, and the
buttons
Hello Everyone,
Is there any information on queries on AR7240 ethernet switch available?
Kindly respond if anyone has any information.
Thanks,
On Tue, May 15, 2012 at 8:11 AM, Parul Aggarwal
parul.aggar...@sibridgetech.com wrote:
Hello Everyone,
Is there any information on queries on
13 matches
Mail list logo
