This makes the AR8327N switch on this board functional.
Signed-off-by: Felix Kaechele
---
target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c
b/target/linux/ar71xx/files/arch/
Signed-off-by: Felix Kaechele
---
target/linux/ar71xx/config-3.10| 1 +
.../ar71xx/files/arch/mips/ath79/mach-mynet-n750.c | 196 +
.../610-MIPS-ath79-openwrt-machines.patch | 85 +
3 files changed, 245 insertions(+), 37 deletions(-)
cr
The bootloader on the WD My Net N750 disables the ports on it's internal
AR8327N switch by powering them down. The stock firmware then brings the
ports back up again by starting the auto negotiation process on each
port.
There is one big disadvantage of this approach: In tests I noticed that
PHYs
Signed-off-by: Felix Kaechele
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 ++-
target/linux/ar71xx/base-files/etc/uci-defaults/02_network | 10 ++
.../ar71xx/base-files/etc/uci-defaults/09_fix-seama-header | 3 ++-
target/linux/ar71xx/base-files/lib/ar
Frankly, figuring out the switch issue on the WD My Net N750 was a pain.
Details to what the exact problem was is in one of the patches in this
patchset.
WD was more cooperative than I thought by publishing the u-boot source
code after I requested it.
>From my POV there are only minor cosmetic iss
thanks that works.
On Thu, Dec 12, 2013 at 3:51 PM, Sebastian Moeller wrote:
> HI Pawel,
>
>
> On Dec 12, 2013, at 21:47 , Pawel Pastuszak
> wrote:
>
> > Hi,
> >
> > I am using pretty much the trunk version of openwrt and i want to adjust
> the tmpfs /tmp size? I recall in old version of open
HI Pawel,
On Dec 12, 2013, at 21:47 , Pawel Pastuszak wrote:
> Hi,
>
> I am using pretty much the trunk version of openwrt and i want to adjust the
> tmpfs /tmp size? I recall in old version of openwrt it was in
> 10_essential_fs but the new version i cannot find it.
>
> Can someone point
Hi,
I am using pretty much the trunk version of openwrt and i want to adjust
the tmpfs /tmp size? I recall in old version of openwrt it was in
10_essential_fs
but the new version i cannot find it.
Can someone point me to the correct direction.
Thanks,
Pawel
_
This patch allow to select between /dev/hwrng and /dev/urandom.
Also updates rng-tools to the last version.
Signed off by: José Vázquez Fernández
diff --git a/utils/rng-tools/Config.in b/utils/rng-tools/Config.in
new file mode 100644
index 000..4f7b4d3
--- /dev/null
+++ b/utils/rng-tools/Co
A couple of days ago found an old patch that adds rngd in busybox:
http://lists.busybox.net/pipermail/busybox/2008-August/066784.html
Because it is 5 years old will need some rework, but could be a good
alternative to rng-tools.
Also made a patch that has the option to select between /dev/hwrng
or
Signed-off-by: Tim Harvey
---
libs/libqmi/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/libs/libqmi/Makefile b/libs/libqmi/Makefile
index a9db3c0..f094439 100644
--- a/libs/libqmi/Makefile
+++ b/libs/libqmi/Makefile
@@ -1,12 +1,12 @@
include $(TOPDIR)/rules.m
Some of the Gateworks Ventana boards have CAN bus support, therefore
we will install the userspace utils.
Signed-off-by: Tim Harvey
---
target/linux/imx6/profiles/120-gateworks.mk | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/linux/imx6/profiles/120-gateworks.mk
b
The previous patch was not the proper fix for PCI devices that require io
resources. The new patch is the proper fix backported from mainline.
Signed-off-by: Tim Harvey
---
...remove-outbound-io-mem-ATU-region-mapping.patch | 106 -
.../0030-pcie-designware-fix-io-transfers.
On Mon, 09 Dec 2013 10:53:20 +0100, Tijs Van Buggenhout wrote:
> On Monday 18 November 2013 19:29:17 mancha wrote:
>> Hauke Mehrtens hauke-m.de> writes:
>> > On 10/17/2013 05:40 PM, chrono wrote:
>> > > Ahoi everyone,
>> > >
>> > > it was requested on IRC that I send my solution to the entropy
>>
Hello,
today I tried to boot the latest trunk with my CubieboardA10, but I
cannot boot at all.
I followed this guide:
http://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi
the most important stuff is:
dd if=openwrt-sunxi-Cubieboard-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
then I for
My bad. Same mail forwarded to the openwrt-devel list.
-- Forwarded message --
From: Yousong Zhou
Date: 12 December 2013 23:05
Subject: Re: [OpenWrt-Devel] [PATCH 3/3] mac80211.sh: fix wds option.
To: Felix Fietkau
Hi, Felix
On 12 December 2013 21:31, Felix Fietkau wrote:
>
NAND flash is very likely to contain bad blocks.
Currently, mtd and therefore sysupgrade fails when it encounters a single bad
block, potentially leaving an unbootable system.
This patch allows the mtd utility to skip bad blocks in NAND flash and complete
sysupgrade successfully.
Thanks,
Mat
On 2013-12-12 13:40, Yousong Zhou wrote:
> commit a7ef3ef `mac80211: add missing set_default to fix stray "radio0:
> sh: bad number" messages" effectly disabled wds option.
>
> Wds is actually set_default before, it is json_get_var() which would set
> variables' value to null if they does not appe
Options of aria2 are consisted of 4 sections:
- `aria2` for general options.
- `http_ftp` for HTTP/FTP related options.
- `bt_metalink` for BitTorrent/Metalink options.
- `rpc` for RPC related options.
Option names in uci config are transformed from aria2's original manual
by replacing dashes
commit a7ef3ef `mac80211: add missing set_default to fix stray "radio0:
sh: bad number" messages" effectly disabled wds option.
Wds is actually set_default before, it is json_get_var() which would set
variables' value to null if they does not appear in the JSON data. This
will cause "bad number" e
It was introduced in commit 2f966e8, "base-files: add a post start hook
for procd managed services".
Signed-off-by: Yousong Zhou
---
package/base-files/files/etc/rc.common |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/package/base-files/files/etc/rc.common
b/packag
Since commit 2ed5144 "base-files: warn when calling /etc/init.d/
Since commit 2ed5144 "base-files: warn when calling /etc/init.d/
- added support for sysupgrade
- fixed missing tab in makefile
current support status
ethernetworks
usb works
leds definedasus:blue:[power|lan|wan|usb] (wifi led unreachable?)
buttons reset, wps
uartnot tested
i2c not tested
---
target/linux
All Gateworks Ventana boards have a Gateworks System Controller
which emulates the following:
- ds1672 RTC
- pca953x GPIO expander
- hardware monitor
- at24 eeprom
Signed-off-by: Tim Harvey
---
target/linux/imx6/profiles/120-gateworks.mk | 1 +
1 file changed, 1 insertion(+)
diff --git a/ta
Signed-off-by: Tim Harvey
---
target/linux/imx6/Makefile| 2 +-
target/linux/imx6/config-3.10 | 4
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/target/linux/imx6/Makefile b/target/linux/imx6/Makefile
index e8d558e..11f68f7 100644
--- a/target/linux/imx6/Makefile
+++ b/ta
Signed-off-by: Tim Harvey
---
package/kernel/linux/modules/other.mk | 17 +
1 file changed, 17 insertions(+)
diff --git a/package/kernel/linux/modules/other.mk
b/package/kernel/linux/modules/other.mk
index d8d437f..c1adc66 100644
--- a/package/kernel/linux/modules/other.mk
+++ b
27 matches
Mail list logo
