Hi all,
On 4/2/20 9:53 PM, David Bauer wrote:
As the reported major bugs are ironed out, switch to the new kernel to
begin testing with a broader audience.
As the DSP exception is now sorted out we should be good to go here.
Any objections on applying this patch left?
Best wishes
David
to after downloading. If the original
mirror for a file where url-filename and filename do not match goes
down, the download failed prior to this patch.
Further improvement can be done by performing this only for the
OpenWrt sources mirrors.
Signed-off-by: David Bauer
---
scripts/download.pl | 8
Allow to configure both RRM beacon as well as neighbor reports
independently and only enable them by default in case the ieee80211k
config option is set.
Signed-off-by: David Bauer
---
package/network/services/hostapd/files/hostapd.sh | 9 -
1 file changed, 4 insertions(+), 5 deletions
not influence the behavior of any already configured
setting.
Signed-off-by: David Bauer
---
.../network/services/hostapd/files/hostapd.sh | 20 ++-
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/package/network/services/hostapd/files/hostapd.sh
b/package/network
This adds information from mac80211 to hostapd get_client ubus function.
This way, TX as well as RX status information as well as the signal can
be determined.
Signed-off-by: David Bauer
---
.../services/hostapd/src/src/ap/ubus.c| 24 +++
1 file changed, 24 insertions
This adds parsed VHT capability information to the hostapd
get_clients method.
Signed-off-by: David Bauer
---
.../services/hostapd/src/src/ap/ubus.c| 71 +++
1 file changed, 71 insertions(+)
diff --git a/package/network/services/hostapd/src/src/ap/ubus.c
b/package
This adds a new get_status method to a hostapd interface, which
provides information about the current interface status.
Signed-off-by: David Bauer
---
.../services/hostapd/src/src/ap/ubus.c| 40 +++
1 file changed, 40 insertions(+)
diff --git a/package/network/services
Currently PHY information obtained from "iw phy" lacks information about
a PHYs HE capabilities when using the by default installed iw-tiny.
As there are already 802.11ax supported devices, enabled printing this
information for the by-default installed iw variant.
Signed-off-by: D
Hi Ben,
On 1/14/21 7:14 PM, Ben Greear wrote:
On 1/14/21 10:05 AM, Ben Greear wrote:
On 1/13/21 4:58 PM, Sven Roederer wrote:
Ben,
seems to me, that at least
"firmware-5-ct-full-community-12.bin-lede.013" is
still not recovered. File is there, but contains only 0x00.
This seems to cause my
Hi,
On 1/21/21 5:21 AM, DENG Qingfang wrote:
> The kernel bump to 5.4 removed the mx25l25635f hack, and the upstream
> property "broken-flash-reset" should be used instead.
Is this dependent on board design? The need for the old hack should be fixed by
this upstream commit [0]. Given that commit
is not active at this early stage resulting in low
available entropy.
There is however a semi-unique identifier available to us, which is the
CID of the used SD card. It is unique to each SD card, hence we can use
it to generate the MAC address used for LAN and WAN.
Signed-off-by: David Bauer
Hardware
Atheros AR7241
16M SPI-NOR
64M DDR2
Atheros AR9283 2T2R b/g/n
2x Fast Ethernet (built-in)
Installation
Transfer the Firmware update to the device using SCP.
Install using fwupdate.real -m -d
Signed-off-by: David Bauer
---
.../dts/ar7241_ubnt_unifi-ap-outdoor
Enable support for the Ubiquiti UniFi Outdoor+ RF filter via
device-tree. The old way of using platform data is not required anymore,
as it was only used on the now removed ar71xx target.
Signed-off-by: David Bauer
---
.../ath/551-ath9k_ubnt_uap_plus_hsr.patch | 35
Hi Sven,
sorry for the late reply.
Firs to fall, there is no real policy on that one, as OpenWrt itself does not
advertise support for cross-target upgrades. It might work, or it might not.
On 11/25/20 8:53 AM, Sven Eckelmann wrote:
> On Tuesday, 24 November 2020 08:58:04 CET Sven Eckelmann
FIT configurations
--
In the future, the MT7621 UniFi6 family can be supported by a single
OpenWrt image.
config@1: U6 Lite
config@2: U6 IW
config@3: U6 Mesh
config@4: U6 Extender
config@5: U6 LR-EA (Early Access - GA is MT7622)
Signed-off-by: David Bauer
---
.../ramips/dts/mt7
This adds basic support for IEEE 802.11ax when requesting HW or HT
Modelist for a PHY from iwinfo. This way, applications using iwinfo can
detect HE phys.
Signed-off-by: David Bauer
---
api/nl80211.h| 38 ++
include/iwinfo.h | 8 +++-
iwinfo_cli.c
Hi John,
On 6/12/21 12:51 AM, John Thomson wrote:
On Fri, 11 Jun 2021, at 08:10, David Bauer wrote:
Can you be more precise in terms of which issues are you facing? The
PHY capabilities on
the AR8333 now read 1000B-X as a supported link mode, so fiber
operation should be possible.
Can you
Hi Lukas,
On 6/13/21 11:43 AM, Lukas Zeller wrote:
> But I was curious to learn what the feature does, and had a look at spi-nor.c
> (spi_nor/core.c). If I haven't misread the code, it restores the addressing
> mode to 3 byte at shutdown. This means an orderly reboot will work, but a
>
Hi,
On 6/11/21 8:08 AM, DENG Qingfang wrote:
> Hi David,
>
> Unfortunately, the issue is still not resolved, according to Minqiang.
> Reverting your 2 commits and applying my patch fixes the issue.
Can you be more precise in terms of which issues are you facing? The PHY
capabilities on
the
Since upstream commit 6467de5a8840 ("Randomize z ordinates in
scalar mult when timing resistant") WolfSSL requires a RNG for
the EC key when built hardened which is the default.
Set the RNG for the EC key to fix connections for OWE clients.
Signed-off-by: David Bauer
---
packa
ss whether
or not wolfssl is compiled hardened.
Always export wc_ecc_set_rng so tools such as hostapd can install
RNG regardless of the built settings for wolfssl.
Signed-off-by: David Bauer
---
package/libs/wolfssl/Makefile | 2 +-
.../libs/wolfssl/patches/200-ecc-rng.pat
key and WolfSSL to export the
interface regardless of the build settings.
David Bauer (2):
wolfssl: always export wc_ecc_set_rng
hostapd: wolfssl: add RNG to EC key
package/libs/wolfssl/Makefile | 2 +-
.../libs/wolfssl/patches/200-ecc-rng.patch| 50
Hi Alex,
On 6/3/21 8:18 AM, Alex Henrie wrote:
> LAN port 4 was swapped with the WAN port and the remaining three LAN
> ports were numbered in reverse order from their labels on the case.
>
> Fixes: 1a775a4fd033 ("ipq806x: add support for TP-Link Talon AD7200")
> Signed-off-by: Alex Henrie
>
Hi,
On 6/4/21 7:12 AM, DENG Qingfang wrote:
> Commit 8222f8e1b9be overrides AR8031's PHY features, making its SFP
> link status detection unavailable. To fix that, do not override it in
> ramips patch.
As the original patch still has to be backported to 21.02, I'd propose
to remove my hacks and
Hi,
On 6/4/21 10:57 AM, DENG Qingfang wrote:
> Hi,
>
> On Fri, Jun 4, 2021 at 3:37 PM David Bauer wrote:
>> As the original patch still has to be backported to 21.02, I'd propose
>> to remove my hacks and instead properly backport c329e5af and 8f7e8762
>> from upstre
Hi Robert,
On 5/16/21 6:01 PM, Robert Marko wrote:
> Netlink support is required for stuff like cable testing,
> so offer it as an option.
>
> Signed-off-by: Robert Marko
> ---
> package/network/utils/ethtool/Makefile | 11 ++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
>
[resend, as I've missed to keep the list CC'ed]
Hi Arjun
On 7/1/21 9:50 PM, Arjun AK wrote:
Signed-off-by: Arjun AK
Describing the rationale of this change would've been nice. This package
is used on most boards with a cellular modem to provide ootb internet
capability, so please explain
olve these cases and align the address space of the GPIO controller
between all SoCs, as the used address space of the driver is identical
for all these.
Signed-off-by: David Bauer
---
target/linux/ath79/dts/ar7100.dtsi | 2 +-
target/linux/ath79/dts/ar724x.dtsi | 2 +-
target/linux/ath79/dts/ar9132.dtsi
This adds 802.11ax HE specific rate information to iwinfo.
Add fields for HE status of a STA as well as DCM and guard interval
fields specific to HE operation.
Signed-off-by: David Bauer
---
api/nl80211.h| 12
include/iwinfo.h | 3 +++
iwinfo_cli.c | 14
Hi Hauke,
On 5/3/21 12:23 AM, Hauke Mehrtens wrote:
> This change removes setting the channels property by default to the
> channel property if nothing else is specified.
>
> When hostapd detects a DFS alarm and it has to switch channels allow
> hostapd to switch to any channel in the frequency
Expose 802.11ax HE rate as well as HW / HT mode information. This is
required to add 802.11ax support to LuCI.
Signed-off-by: David Bauer
---
iwinfo.c | 45 +
1 file changed, 45 insertions(+)
diff --git a/iwinfo.c b/iwinfo.c
index 63ff2a1..6b376c4
Hi,
On 4/28/21 1:18 PM, Etienne Champetier wrote:
> Hi David,
>
> Le mer. 28 avr. 2021 à 07:07, David Bauer a écrit :
>>
>> Expose 802.11ax HE rate as well as HW / HT mode information. This is
>> required to add 802.11ax support to LuCI.
>>
>> Signed-o
Expose the SDK options for binary stripping to the menuconfig. This
way, packages can easily be built with debug symbols using the SDK.
Signed-off-by: David Bauer
---
target/sdk/files/Config.in | 46 ++
1 file changed, 46 insertions(+)
diff --git a/target
Netlink support is required for using the virtual cable tester
functionality. Thus, add a build variant with enabled netlink
support.
Signed-off-by: David Bauer
---
package/network/utils/ethtool/Makefile | 26 ++
1 file changed, 22 insertions(+), 4 deletions(-)
diff
The virtual cable tester depends on the netlink interface for ethtool.
Thus, enable it in the generic kernel configuration.
Signed-off-by: David Bauer
---
target/linux/generic/config-5.10 | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/generic/config-5.10 b
As we built our own CPIO now, use this version instead of whatever the
host may or may not provide.
Signed-off-by: David Bauer
---
include/image.mk | 2 +-
include/kernel-defaults.mk | 2 +-
include/unpack.mk | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff
On 3/5/21 12:57 AM, Paul Spooren wrote:
> What's the size change?
48 kiB
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
meditak-mt7622 as well as mediatek-mt7623 require CPIO to create their
initramfs images. So build CPIO as part of the host toolchain.
Signed-off-by: David Bauer
---
tools/Makefile| 2 +-
tools/cpio/Makefile | 14
The spi-ath79 driver performs the chipselect by writing to dedicated
register in the SPI register block. So the GPIO numbers were not used.
Tested-on: Enterasys WS-AP3705i
Signed-off-by: David Bauer
---
target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi| 1 -
target/linux/ath79/dts
Hi,
On 4/16/21 4:12 AM, Chuanhong Guo wrote:
> Hi!
>
> On Fri, Apr 16, 2021 at 4:43 AM David Bauer wrote:
>>
>> The spi-ath79 driver performs the chipselect by writing to dedicated
>> register in the SPI register block. So the GPIO numbers were not used.
>
The placeholder for the 802.11ax hwmode was missing.
Signed-off-by: David Bauer
---
iwinfo_cli.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/iwinfo_cli.c b/iwinfo_cli.c
index ee5a0e2..82b409c 100644
--- a/iwinfo_cli.c
+++ b/iwinfo_cli.c
@@ -274,12 +274,12 @@ static
Perform a split wiphy dump when acquiring the hw modelist of a mac80211
device. Otherwise HE capabilities are missing from the message.
This is necessary since upstream commit f8d504caa ("nl80211: reduce
non-split wiphy dump size") (Kernel 5.9).
Signed-off-by: David Bauer
---
iwinfo
_match);
+
+static struct i2c_driver ubnt_ledbar_driver = {
+ .driver = {
+ .name = "ubnt-ledbar",
+ .of_match_table = of_ubnt_ledbar_match,
+ },
+ .probe = ubnt_ledbar_probe,
+ .remove = ubnt_ledbar_remove,
+ .id_table
/mtdblock6
5. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1
$ dd if=openwrt.bin of=/dev/mtdblock8
$ dd if=openwrt.bin of=/dev/mtdblock9
6. Reboot the device. It should boot into OpenWrt.
Signed-off-by: David Bauer
---
.../lib/preinit/05_set_preinit_iface
.
Tested-on: Nanoi R2S
Signed-off-by: David Bauer
---
target/linux/rockchip/Makefile| 1 +
target/linux/rockchip/armv8/config-5.10 | 673 ++
target/linux/rockchip/armv8/config-5.4| 165 -
target/linux/rockchip/config-default | 297
-by: David Bauer
---
target/linux/mpc85xx/config-5.10 | 280 ++
target/linux/mpc85xx/p1010/target.mk | 2 +
...85xx-add-gpio-keys-to-of-match-table.patch | 10 +
...0-powerpc-85xx-tl-wdr4900-v1-support.patch | 83 ++
.../101-powerpc-85xx-hiveap-330
When recursively deleting partitions, don't acquire the masters
partition lock twice. Otherwise the process endy up in a deadlocked
state.
Signed-off-by: David Bauer
---
...when-recursively-deleting-partitions.patch | 24 +++
1 file changed, 24 insertions(+)
create mode 100644
es
David
>
> Greetings
> Perry
>
> On February 17, 2021 5:59:28 AM GMT+01:00, David Bauer
> wrote:
>> Hi Daniel,
>>
>> On 2/17/21 4:21 AM, Daniel Golle wrote:
>>> On Tue, Feb 16, 2021 at 11:48:04PM +0100, David Bauer wrote:
>>>> Tested o
Hi Daniel,
On 2/17/21 4:21 AM, Daniel Golle wrote:
> On Tue, Feb 16, 2021 at 11:48:04PM +0100, David Bauer wrote:
>> Tested on: Sophos RED 15W
>>
>> The TP-Link WL-WDR4900 needs to be disabled when 5.10 becomes the
>> default kernel.
>
> That's sad. Why?
OpenSSL downloads itself are distributed using Akamai CDN, so use these
sources as the highest priority.
Remove a stale mirror which seems to be offline for a longer time
already.
Add fallbacks to the old release path also for the mirrors.
Signed-off-by: David Bauer
---
package/libs/openssl
Hi,
On 2/18/21 6:16 PM, Adrian Schmutzler wrote:
> Hi,
>
>> -Original Message-
>> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
>> On Behalf Of David Bauer
>> Sent: Dienstag, 16. Februar 2021 23:48
>> To: openwrt-devel@lists.ope
Hi Jan,
looks pretty solid to me.
On 8/14/21 2:33 PM, Jan-Niklas Burfeind wrote:
...
> +define Device/onion_omega
> + $(Device/tplink-16mlzma)
> + SOC := ar9331
> + DEVICE_VENDOR := Onion
> + DEVICE_MODEL := Omega
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb2
AR9331 uses a different
Hi Felix,
updating my Wireless APs (ath9k+ath10k / mt7603+mt7915) broke ARP broadcast
delivery to clients
connected to the radios with SW rate control.
Bisecting this problem revealed commit 0f688797 ("mac80211: add missing change
for encap offload
on devices with sw rate control") introduces
.
Signed-off-by: Jan Braun
[squash commits - adapt usock usage]
Signed-off-by: David Bauer
---
main.c | 1 -
openwrt/usteer/files/etc/config/usteer | 3 +
openwrt/usteer/files/etc/init.d/usteer | 1 +
remote.c | 172
Hi Felix,
On 9/6/21 2:18 PM, Felix Fietkau wrote:
>
>> On 6. Sep 2021, at 02:03, David Bauer wrote:
>>
>> Hi Felix,
>>
>> updating my Wireless APs (ath9k+ath10k / mt7603+mt7915) broke ARP broadcast
>> delivery to clients
>> connected to the
Hi Jan-Niklas,
On 8/11/21 6:54 PM, Jan-Niklas Burfeind wrote:
> The Onion Omega is a hardware development platform with built-in WiFi.
>
> https://onioniot.github.io/wiki/
>
> Specifications:
> - QCA9331 @ 400 MHz (MIPS 24Kc Big-Endian Processor)
> - 64MB of DDR2 RAM running at 400 MHz
> -
configuration in a way it fails on unset symbols
regardless of the aformentioned preconditions.
Signed-off-by: David Bauer
---
include/kernel-build.mk | 1 +
target/linux/generic/hack-5.10/205-kconfig-exit.patch | 11 +++
target/linux/generic/hack-5.4/205
Hi Nick,
On 10/21/21 11:31, Nick wrote:
Is someone massively utilizing the ubus interface from hostapd? I'm doing this
with dawn and I saw that blocktrron already fixed some infinity loop. However,
currently DAWN is crashing the hostapd. I make extensive use of the
get_clients, all
Hi John,
On 9/26/21 14:31, John Crispin wrote:
On 26.09.21 13:34, David Bauer wrote:
That being set, the goal of poemgr is not to replace the other efforts. I'm sorry if I caused this impression.
it did not replace anything. I am fully with you on this one, realtek-poe took
the same
To allow steering daemons to be aware of the STA-decided transition
target, publish WNM transition responses to ubus. This way, steerings
daemons can learn about STA-chosen targets and send a better selection
of transition candidates.
Signed-off-by: David Bauer
---
.../hostapd/patches/600
) will be invalid
neighbors: blob-array - Array of strings containing neighbor reports as
hex-string
Signed-off-by: David Bauer
---
.../services/hostapd/src/src/ap/ubus.c| 152 +-
1 file changed, 112 insertions(+), 40 deletions(-)
diff --git a/package/network
after
association. In the worst scenario the client immediatly associates
again to the station and ends up in a kick loop.
Don't allow associating when a min_snr is configured and the client
signal is below this value.
Signed-off-by: David Bauer
---
policy.c | 18 --
1 file changed
Hi Bjorn,
Hi John,
On 9/26/21 10:43, Bjørn Mork wrote:
John Crispin writes:
poemgr does not use the APIs provided by libubox so I doubt that this
will land in the tree.
It's going through the packages repo according to
Hi Rui,
Hi Rosen,
On 9/19/21 12:38, Rui Salvaterra wrote:
The ag71xx_ring changes are already part of the upstream driver. However, since
we're not using it at all yet, let's apply this to our driver for the time
being, as David explicitly requests performance numbers before applying it
Hi Nick,
On 12/25/21 16:49, Nick wrote:
The flash-chip mx25l6405d that is contained in the Ubiquity Nanostation
M5 (XM) is not able to write to the flash with kernel 5.10. Probably,
caused by invalid block protection clearing. For example the logread
contains a lot of those messages:
and sideloading via EVA. So a network request for a boot image raises
more problems than
it tries to solve.
Best
David
Signed-off-by: Enrico Mioso
CC: Christian Lamparter
CC: David Bauer
---
Reasons for this patch:
1 - There are situations where it can be nice to recover a device without the
AVM
Hi Ivar,
Hi Daniel,
On 12/9/21 23:12, Daniel Golle wrote:
Hi Ivar,
On Thu, Dec 09, 2021 at 10:14:22PM +0100, Ivar Orskaug wrote:
Hi,
P2812HNUF3 is currently broken in main because of the kernel 5.10
increase in size. This patch increases the kernel flash partition to
3072k, aligning with
Hi Hauke,
On 1/9/22 17:55, Hauke Mehrtens wrote:
The criteria from gnu.org are irrelevant to me and I agree with Rosen and Bjørn
on that topic.
I would prefer a vote like this, this is just an example not the official vote:
-
Migrate bug reporting from bugs.openwrt.org to
Refresh patches after updating to hostapd v2.10.
Signed-off-by: David Bauer
---
.../001-wolfssl-init-RNG-with-ECC-key.patch | 6 ++--
...erministic-channel-on-channel-switch.patch | 6 ++--
...ix-sta-add-after-previous-connection.patch | 4 +--
...ewrite-neigh-code-to-not-depend-on-l.patch
-compilation-with-Hotspot-2.0-disabled.patch
08bdf4f90de61a84ed8f4dd918272dd9d36e2e1f
Compile-tested: wpad-wolfssl hostapd-openssl
Run-tested: ath79-generic
Signed-off-by: David Bauer
---
package/network/services/hostapd/Makefile | 6 +-
...hannels-to-be-selected-if-dfs-is-ena.patch | 60
Hi Eneas,
On 1/7/22 21:19, Eneas U de Queiroz wrote:
The 80211r r0kh and r1kh defaults are generated from the md5sum of
"$mobility_domain/$auth_secret". auth_secret is only set when using EAP
authentication, but the default key is used for SAE/PSK as well. In
this case, auth_secret is empty,
Hi Stijn,
On 2/7/22 20:48, Stijn Tintel wrote:
On 17/01/2022 21:57, David Bauer wrote:
Refresh patches after updating to hostapd v2.10.
We usually combine bump and patch refresh in the same commit.
I don't like doing it in this case, as it makes the delta of patches /
their content harder
Parse the card application state and report it to the SIM card status
output object.
This is required to detect a card application which is in the failed
(illegal) state.
Signed-off-by: David Bauer
---
commands-uim.c | 17 +
1 file changed, 17 insertions(+)
diff --git
Support the power-up and power-down commands for the modem's SIM card.
This allows to reset the SIM card and recover it from an illegal card
application state.
Signed-off-by: David Bauer
---
commands-uim.c | 52 ++
commands-uim.h | 9 -
2
with the default settings.
This can be worked around by configuring the APN and PDP type to profile
slot 1 and subsequently enabling the data connection.
Signed-off-by: David Bauer
---
commands-wds.c | 96 ++
commands-wds.h | 9 +
2 files changed, 105
-profile
--modify-profile
Your patch looks better, I'll strip patch 3 from my series and instead
apply yours.
Best
David
/Henrik
Den tis 10 okt. 2023 kl 16:07 skrev David Bauer :
Extend uqmi so it can modify connection profiles stored on the modem.
This is required in case the operator disallows
Hi,
On 5/17/22 14:12, Wojciech Dubowik wrote:
The candidate is never set in this loop. Fix it by setting it
to the first valid entry.
Applied to master. Thanks!
Best
David
Signed-off-by: Wojciech Dubowik
---
policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Hi Stijn,
On 6/24/22 15:05, Stijn Tintel wrote:
On 23/06/2022 00:47, David Bauer wrote:
Hi Stijn,
On 6/21/22 15:36, Stijn Tintel wrote:
Multi Band Operation is required for 802.11ax certification, so let's
enable it if 802.11ax support is enabled.
I'd suggest we enable it for the -full
Hi Stijn,
On 6/21/22 15:36, Stijn Tintel wrote:
Multi Band Operation is required for 802.11ax certification, so let's
enable it if 802.11ax support is enabled.
I'd suggest we enable it for the -full build variants unconditionally.
Best
David
Signed-off-by: Stijn Tintel
---
Update hostapd to Git HEAD from 2022-05-08. This allows us to take
advantage of background radar-detection ad well as BSS color collision.
Suggested-by: Lorenzo Bianconi
Signed-off-by: David Bauer
---
package/network/services/hostapd/Makefile | 6 +-
.../hostapd/files/wpa_supplicant
Add the current BSS color to hostapd get_status method. This field is
set to -1 in case BSS color is not active for the BSS.
Signed-off-by: David Bauer
---
package/network/services/hostapd/src/src/ap/ubus.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/package/network/services
In case no specific BSS color is configured, set it to a random value.
Signed-off-by: David Bauer
---
.../files/lib/netifd/wireless/mac80211.sh | 4 +++-
...tapd-config-support-random-BSS-color.patch | 24 +++
...750-qos_map_set_without_interworking.patch | 2 +-
3 files
Hi Jan-Niklas,
On 12/22/22 21:12, Jan-Niklas Burfeind wrote:
+generate_mac_from_mmc_cid()
+{
+ local mmc_dev=$1
+
+ local sd_hash=$(sha256sum/sys/class/block/$mmc_dev/device/cid)
+ local mac_base=$(macaddr_canonicalize "$(echo "${sd_hash}" | dd bs=1 count=12
2>/dev/null)")
+
.
The initial installation has to be done with an older version of OpenWrt
in case the generated image exceeds the space of a single kernel
partition in the future.
Signed-off-by: David Bauer
---
target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi | 9 ++---
target/linux/ath79/image/generic-ubnt.mk
.
The initial installation has to be done with an older version of OpenWrt
in case the generated image exceeds the space of a single OS
partition in the future.
Signed-off-by: David Bauer
---
target/linux/ath79/dts/ar9344_ocedo_raccoon.dts | 9 ++---
target/linux/ath79/dts/qca9558_ocedo_koala.dts
.
The initial installation has to be done with an older version of OpenWrt
in case the generated image exceeds the space of a single kernel
partition in the future.
Signed-off-by: David Bauer
---
target/linux/ramips/dts/mt7621_ubnt_usw-flex.dts | 8 ++--
target/linux/ramips/image/mt7621.mk
Hi Sebastian,
On 1/7/23 12:56, Sebastian Schaper wrote:
[...]
+_default {
+ gpio {
+ groups = "uart2";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index dd49583bf4..6492748aed
Hi James,
thanks for the patch. I will apply it to my staging tree and test it on my unit.
One small remark (I will change when applying to the tree)
On 1/17/23 08:02, tr...@ucc.asn.au wrote:
+ {
+ status = "okay";
+
+ label = "lan1";
+};
+
Should be lan without the index.
Best
Hi Bjorn,
On 11/4/22 09:29, Bjørn Mork wrote:
You are right that the bootloader must be fixed. But the vendor isn't
likely to do that as long as they run older kernels. I believe the
OpenWrt policy in such cases is to try to work around the issue.
Replacing the vendor bootloader is a last
Hi Bjorn,
On 11/7/22 13:57, Bjørn Mork wrote:
Jonas Gorski writes:
On Sun, 6 Nov 2022 at 12:50, Bjørn Mork wrote:
Jonas Gorski writes:
An option is also to set a load address for the dtb in the FIT image,
then U-Boot will relocate it before passing it to the kernel.
Yes, that is worth
Hi Felix,
On 6/23/23 12:47, Felix Fietkau wrote:
On 23.06.23 12:29, David Bauer wrote:
Hi Felix,
On 6/23/23 08:55, Felix Fietkau wrote:
On 18.05.23 11:19, David Bauer wrote:
ath10k does not report excessive loss in case of broken block-ack
sessions. The loss is communicated to the host-os
Hi Felix,
On 6/23/23 08:55, Felix Fietkau wrote:
On 18.05.23 11:19, David Bauer wrote:
ath10k does not report excessive loss in case of broken block-ack
sessions. The loss is communicated to the host-os, but ath10k does not
trigger a low-ack events by itself.
The mac80211 framework for loss
of ath10k's
own loss detection mechanism.
Signed-off-by: David Bauer
---
...1-always-use-mac80211-loss-detection.patch | 33 +++
1 file changed, 33 insertions(+)
create mode 100644
package/kernel/mac80211/patches/subsys/340-mac80211-always-use-mac80211-loss-detection.patch
diff
Yes please.
- David
On 1/30/24 19:15, Christian Marangi (Ansuel) wrote:
Robert is active in OpenWrt since 2017 and with some recent stats, he
has more than 310 commits merged in OpenWrt.
He also have uncounted Reviewed-by tag on various PR and merged commits
and generally helps in everything
Hi John,
On 1/9/24 11:49, John Crispin wrote:
FAQ
* Why are there are 2 different flash chips?
- the idea is to make the device (almost!) unbrickable and very easy to recover
- NAND will hold the main loader (U-Boot) and the Linux image and will be the
default boot device
- NOR will be
Hi Felix,
On 1/26/24 18:45, Felix Fietkau wrote:
Hi,
does anybody still care about the broadcom-wl package in OpenWrt?
I think it would be nice if we could get rid of it, along with the code support
and abstraction for different wireless drivers.
It would also allow us to rewrite iwinfo in
Hi Daniel,
Hi Petr,
On 11/13/23 21:49, Daniel Golle wrote:
On Mon, Nov 13, 2023 at 07:54:34PM +, Petr Štetiar wrote:
Paul Spooren [2023-11-13 13:30:10]:
Hi,
How about we follow the approach of Alpine Linux[1] and offer a standard, an
extended and a virtual firmware for the x86/64
Hi Gio,
thanks for sending this patch to the mailinglist. We've talked at last WCW in
Berlin
(If i don't mistake you for something else).
I gave the patch a test-run yesterday with two MT7915 and radios and I've
observed two
issues:
1. Neither the 2.4 nor 5 GHz radios enable 802.11ax
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Hi John,
can you share which
301 - 399 of 399 matches
Mail list logo