Re: [OpenWrt-Devel] [Patch] board detection WNDR3400v2

2013-02-25 Thread Hauke Mehrtens 
On 02/25/2013 03:07 AM, Dirk Neukirchen wrote:
 WNDR3400v2 is based on BCM53xx . Image that is created breaks the router
 somehow therefore #.
 
 CFE and NVRAM contain different vars - example:
 CFE line original: Device eth0:  hwaddr 74-44-01-37-C6-69, ipaddr
 192.168.1.1, mask 255.255.255.0
 CFE after openwrt: Device eth0:  hwaddr 00-FF-FF-FF-FF-FF, ipaddr
 192.168.1.1, mask 255.255.255.0
 
 Logs were posted earlier on this mailing list:
 https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
 Different logs with factory firmware are in the wiki:
 http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2
 (and on wikidevi for example)
 
 Signed off by: Dirk Neukirchen dirkneukirc...@web.de

Thank you for the patch, it was committed in r35790.

This patch was wrongly formated, e.g. all tabs where replaced by some
spaces.
260-MIPS-BCM47XX-add-board-detection.patch was broken, you also have to
change the header with the length of the patch if you add something.

Hauke
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Re: [OpenWrt-Devel] [Patch] board detection WNDR3400v2

2013-02-25 Thread Rafał Miłecki 
2013/2/25 Hauke Mehrtens ha...@hauke-m.de:
 Some Netgear devices have a special partition often named board_data
 before the nvram partition containing some special configuration similar
 to nvram. The boot loader uses this configuration. OpenWrt does not have
 a automatic detection for it in kernel 3.6 and your device was unknow
 and OpenWrt used that flash space for other stuff.

Does bcm47xxpart detect that partition correctly on your device?

-- 
Rafał
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

[OpenWrt-Devel] [Patch] board detection WNDR3400v2

2013-02-24 Thread Dirk Neukirchen 
WNDR3400v2 is based on BCM53xx . Image that is created breaks the router 
somehow therefore #.


CFE and NVRAM contain different vars - example:
CFE line original: Device eth0:  hwaddr 74-44-01-37-C6-69, ipaddr 
192.168.1.1, mask 255.255.255.0
CFE after openwrt: Device eth0:  hwaddr 00-FF-FF-FF-FF-FF, ipaddr 
192.168.1.1, mask 255.255.255.0


Logs were posted earlier on this mailing list: 
https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
Different logs with factory firmware are in the wiki: 
http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2

(and on wikidevi for example)

Signed off by: Dirk Neukirchen dirkneukirc...@web.de



diff --git a/target/linux/brcm47xx/image/Makefile 
b/target/linux/brcm47xx/image/Makefile

index ffb5e7c..f9afa79 100644
--- a/target/linux/brcm47xx/image/Makefile
+++ b/target/linux/brcm47xx/image/Makefile
@@ -124,6 +124,7 @@ define Image/Build
 #$(call 
Image/Build/Chk,$(1),wgr614_v9,U12H094T00_NETGEAR,2,$(patsubst 
jffs2-%,jffs2,$(1)))
 #$(call 
Image/Build/Chk,$(1),wndr3300,U12H093T00_NETGEAR,2,$(patsubst 
jffs2-%,jffs2,$(1)))
 $(call 
Image/Build/Chk,$(1),wndr3400_v1,U12H155T00_NETGEAR,2,$(patsubst 
jffs2-%,jffs2,$(1)))
+#$(call 
Image/Build/Chk,$(1),wndr3400_v2,U12H187T00_NETGEAR,2,$(patsubst 
jffs2-%,jffs2,$(1)))
 #$(call 
Image/Build/Chk,$(1),wndr3400_vcna,U12H155T01_NETGEAR,2,$(patsubst 
jffs2-%,jffs2,$(1)))
 #$(call 
Image/Build/Chk,$(1),wndr4000,U12H181T00_NETGEAR,2,$(patsubst 
jffs2-%,jffs2,$(1)))
 $(call 
Image/Build/Chk,$(1),wnr834b_v2,U12H081T00_NETGEAR,2,$(patsubst 
jffs2-%,jffs2,$(1)))
diff --git 
a/target/linux/brcm47xx/patches-3.6/260-MIPS-BCM47XX-add-board-detection.patch 
b/target/linux/brcm47xx/patches-3.6/260-MIPS-BCM47XX-add-board-detection.patch

index 6edbaed..711b0ec 100644
--- 
a/target/linux/brcm47xx/patches-3.6/260-MIPS-BCM47XX-add-board-detection.patch
+++ 
b/target/linux/brcm47xx/patches-3.6/260-MIPS-BCM47XX-add-board-detection.patch

@@ -112,6 +112,7 @@
 +{{BCM47XX_BOARD_NETGEAR_WGR614V9, Netgear WGR614 V9}, 
U12H094T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3300, Netgear WNDR3300}, 
U12H093T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, Netgear WNDR3400 V1}, 
U12H155T00_NETGEAR,},
++  {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, Netgear WNDR3400 V2}, 
U12H187T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, Netgear WNDR3400 Vcna}, 
U12H155T01_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, Netgear WNDR3700 V3}, 
U12H194T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR4000, Netgear WNDR4000}, 
U12H181T00_NETGEAR,},

@@ -298,6 +299,7 @@
 +BCM47XX_BOARD_NETGEAR_WGR614V9,
 +BCM47XX_BOARD_NETGEAR_WNDR3300,
 +BCM47XX_BOARD_NETGEAR_WNDR3400V1,
++BCM47XX_BOARD_NETGEAR_WNDR3400V2,
 +BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
 +BCM47XX_BOARD_NETGEAR_WNDR3700V3,
 +BCM47XX_BOARD_NETGEAR_WNDR4000,
diff --git 
a/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch 
b/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch

index 6edbaed..acf550c 100644
--- 
a/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch
+++ 
b/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch

@@ -112,6 +112,7 @@
 +{{BCM47XX_BOARD_NETGEAR_WGR614V9, Netgear WGR614 V9}, 
U12H094T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3300, Netgear WNDR3300}, 
U12H093T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, Netgear WNDR3400 V1}, 
U12H155T00_NETGEAR,},
++{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, Netgear WNDR3400 V2}, 
U12H187T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, Netgear WNDR3400 Vcna}, 
U12H155T01_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, Netgear WNDR3700 V3}, 
U12H194T00_NETGEAR,},
 +{{BCM47XX_BOARD_NETGEAR_WNDR4000, Netgear WNDR4000}, 
U12H181T00_NETGEAR,},

@@ -298,6 +299,7 @@
 +BCM47XX_BOARD_NETGEAR_WGR614V9,
 +BCM47XX_BOARD_NETGEAR_WNDR3300,
 +BCM47XX_BOARD_NETGEAR_WNDR3400V1,
++BCM47XX_BOARD_NETGEAR_WNDR3400V2,
 +BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
 +BCM47XX_BOARD_NETGEAR_WNDR3700V3,
 +BCM47XX_BOARD_NETGEAR_WNDR4000,
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel