-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi.
> Hmmmit seems to have disappeared. I will try to find time to
> look into this.
It was removed deliberately because image-config uci-defaults clashed
with ar71xx network generation uci-defaults.
The most universal way to preconfigure an im
Hi,
On Thu, Nov 29, 2012 at 11:56:29PM +, David Woodhouse wrote:
> Hm, do we really only have Legacy IP enabled by default? We should
> really set an IPv6 address too (ULA or perhaps site-local). That would
> be *much* easier to deal with when connecting it to an existing network.
No site-loc
annu Nyman"
Sent: Thursday, November 29, 2012 5:42:10 PM
Subject: Re: [OpenWrt-Devel] Change Default IP?
Actually shouldn't matter. If using right config option (under Image
options IRC) then there will be an uci-defaults file that runs on
firstboot to set the ipaddr, which should occ
uot;Daniel Dickinson"
> To: "OpenWrt Development List"
> Sent: Wednesday, November 28, 2012 7:41:16 PM
> Subject: Re: [OpenWrt-Devel] Change Default IP?
>
> Perhaps you're trying to set image configuration not preinit (i.e. the
> default for regular opera
"
Sent: Thursday, November 29, 2012 6:56:29 PM
Subject: Re: [OpenWrt-Devel] Change Default IP?
On Thu, 2012-11-29 at 15:17 -0500, John Lauro wrote:
> I tried preinit and also
> .../trunk/package/base-files/files/etc/config/network
> .../trunk/target/linux/ar7/base-files/etc/c
On Thu, 2012-11-29 at 15:17 -0500, John Lauro wrote:
> I tried preinit and also
> .../trunk/package/base-files/files/etc/config/network
> .../trunk/target/linux/ar7/base-files/etc/config/network
>
> and it still comes out as 192.168.1.1. (building for a wndr3800)
>
> Seems to be lots of network
---
From: "Daniel Dickinson"
To: "OpenWrt Development List"
Cc: "Hannu Nyman"
Sent: Thursday, November 29, 2012 5:42:10 PM
Subject: Re: [OpenWrt-Devel] Change Default IP?
Actually shouldn't matter. If using right config option (under Image
options IRC) then ther
Actually shouldn't matter. If using right config option (under Image
options IRC) then there will be an uci-defaults file that runs on
firstboot to set the ipaddr, which should occur after the defconfig
configuration. At least that's the intended design; if the order of
scripts is wrong then that
You mentioned later in the thread that you are building for wndr3800. That is
the key info here.
Due to complex switch port LED defintions, WNDR3700/3800 has a dedicated
network file template that will be used:
https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/base-files/etc/defconfig/
Hi again.
> > I tried preinit and also
> > .../trunk/package/base-files/files/etc/config/network
> > .../trunk/target/linux/ar7/base-files/etc/config/network
> >
> > and it still comes out as 192.168.1.1. (building for a wndr3800)
> >
> > Seems to be lots of network files. I guess I could hav
Hi, John.
> I tried preinit and also
> .../trunk/package/base-files/files/etc/config/network
> .../trunk/target/linux/ar7/base-files/etc/config/network
>
> and it still comes out as 192.168.1.1. (building for a wndr3800)
>
> Seems to be lots of network files. I guess I could have the wrong on
under ar711x.
- Original Message -
From: "Weedy"
To: openwrt-devel@lists.openwrt.org
Sent: Wednesday, November 28, 2012 7:21:25 PM
Subject: Re: [OpenWrt-Devel] Change Default IP?
On 28/11/12 06:38 PM, John Lauro wrote:
> Is there a place to change the default IP for a f
Right... unable to locate a place to set an IP address for the image init
configuration, only preinit.
- Original Message -
From: "Daniel Dickinson"
To: "OpenWrt Development List"
Sent: Wednesday, November 28, 2012 7:41:16 PM
Subject: Re: [OpenWrt-Devel] Change
Perhaps you're trying to set image configuration not preinit (i.e. the
default for regular operation)? If so preinit is the wrong ip address.
Regards,
Daniel
On 28/11/2012 7:21 PM, Weedy wrote:
> On 28/11/12 06:38 PM, John Lauro wrote:
>> Is there a place to change the default IP for a firmware
On 28/11/12 06:38 PM, John Lauro wrote:
> Is there a place to change the default IP for a firmware build?
>
> I tried setting under Image configuration -> Preinit configuration options ->
> IP address for preinit network messages, but that doesn't seem to work (not
> that I expected to, but it'
15 matches
Mail list logo