Hi Raymond,
> > Can you open a case at
> > https://mymellanox.force.com/support/SupportLogin and we will be
> > happy to help you.
>
> We have case# 00416594
>
> > Are you running OpenFlow on the switch or only using the switch L2
> > with LAG/bond?
I have reviewed your logs in the case, I'm
Hi Amit,
> Can you open a case at
> https://mymellanox.force.com/support/SupportLogin and we will be happy
> to help you.
We have case# 00416594
> Are you running OpenFlow on the switch or only using the switch L2 with
> LAG/bond?
The switch is mlnxos. We are only using switch L2 with
Hi Raymond,
Can you open a case at https://mymellanox.force.com/support/SupportLogin and
we will be happy to help you.
> > After sending that message, I read at the following that lacp mode is
> > not supported and is problematic, and that I should use
> > bond_mode=balance-tcp which does
> > Based upon documentation, this should 'just' work, but well, it doesn't.
> The
> > two slave interfaces seem to always be disabled. I have the following:
> >
> > # ovs-vsctl add-bond ovsbr0 bond_mlnx enp8s0f0 enp8s0f1 lacp=active
> > trunks=64,65
>
> After sending that message, I read at the
> Based upon documentation, this should 'just' work, but well, it doesn't.
The
> two slave interfaces seem to always be disabled. I have the following:
>
> # ovs-vsctl add-bond ovsbr0 bond_mlnx enp8s0f0 enp8s0f1 lacp=active
> trunks=64,65
After sending that message, I read at the following
