Do you have a make or schematic or datasheet for your humidity sensor?
Paul Alfille
On Sun, Sep 4, 2011 at 2:28 PM, Miska Sulander wrote:
> Paul Alfille gmail.com> writes:
>
> > The humidity sensor as first published in "Sensors" magazine by Dan
> > Awtrey used the HIH-3600 sensor and the VDD
Paul Alfille gmail.com> writes:
> The humidity sensor as first published in "Sensors" magazine by Dan
> Awtrey used the HIH-3600 sensor and the VDD and VAD pins of the
> DS2438.
>
> See http://www.elin.ru/files/pdf/1-Wire/humsensor.pdf -- it's nicely written.
>
> In my naivety I created a humid
I did update the DS2438 man page, but haven't posted it to the web site.
The DATANAB/reset is write-only yes-no (0 or 1).
If written with a true (1) value, the calibration constants will be
reread and the offset and current sensing reset to the proper state
for humidity.
This is done automatical
Paul Alfille schrieb:
> Wonderful.
> HIH3600/humidity
> HIH4000/humidity
> HTM1735/humidity
> and now
> DATANAB/humidity
>
> Because the DATANAB identifies itself, I can have the main humidity
> point to DATANAB/humidity if it's a DATANAB design, and
> HIH3600/humidity otherwise.
>
> Can you te
Wonderful.
The humidity sensor as first published in "Sensors" magazine by Dan
Awtrey used the HIH-3600 sensor and the VDD and VAD pins of the
DS2438.
See http://www.elin.ru/files/pdf/1-Wire/humsensor.pdf -- it's nicely written.
In my naivety I created a humidity file off the main DS2438 directo
Paul Alfille schrieb:
> A minor release, mainly to get the Datanab humidity support out there.
>
> New release 2.8p10
>
> 1. Support for the DataNAB humidity sensor.
> 2. Don't cache empty directories
>
> The DATNAB humidity sensor uses the familiar HIH-4000 sensor and the
> DS2438 like the ot
