[Paraview] announce: VTK/ParaView Training - June 2 and 3, 2015, Lyon, France

courses will be taught in English. If you have any question, please contact us at! formations at http://www.kitware.fr Thank you, *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* ___ Powered by www.kitware.com Visit

Re: [Paraview] Differences between OpenGL and OpenGL2 versions of ParaView

s) are the last block if the first level block hierarchy. Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-07-30 22:19 GMT+02:00 Adam Lyon : > Hi, I'm trying to use ParaView built with OpenGL2, hoping to see some > speed improvem

Re: [Paraview] Extract the x,y,z extents of a domain in Paraview

ains many other information about the source like: - DataSetType - MemorySize - PolygonCount - NumberOfPoints - NumberOfCels etc. Regards, *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-08-01 1:24 GMT+02:00 Neal,Christopher R : > Hi all, > >

Re: [Paraview] Extract the x,y,z extents of a domain in Paraview

Neal, Try this: >>> mySource.PointData.values() >>> mySource.CellData.values() Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-08-03 17:59 GMT+02:00 Neal,Christopher R : > Thanks Joachim! > > > Do you a

Re: [Paraview] PARALLEL PROJECTION IN PARAVIEW 4.4

Gaspare, The option "Camera Parallel Projection" is available as an Advanced option (click on the gear wheel to show advanced option) of the View panel (in the Properties panel). Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-09

[Paraview] announce: VTK/ParaView Training - November 3 and 4, 2015, Lyon, France

the courses will be taught in English. If you have any question, please contact us at: formati...@kitware.fr Thank you, *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* ___ Powered by www.kitware.com Visit other K

Re: [Paraview] Paraview - Python // cell types issues

Best, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-10-20 9:38 GMT+02:00 DamB : > Hello, > > I would like to check all cell types on a created pipeline slice with a > loop and do some further calculation based on the cell type. &

[Paraview] announce: Advanced VTK/ParaView Training - December 15 and 16, 2015, Lyon, France

courses will be taught in English. If you have any question, please contact us at: formati...@kitware.fr Thank you, *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* ___ Powered by www.kitware.com Visit other Kitwar

Re: [Paraview] Customize programmable filters: copy arrays

after the copy for instance, to not alter the input arrays. Best, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-11-12 11:36 GMT+01:00 Jean-Michel Lucas : > Thank you for your answers, both methods work fine. > > I am also adding n

Re: [Paraview] OpenGL Backend Identification

global VTK configuration header, shouldn't we add a function in vtkRenderWindow to return the version of the backend it is based on? *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-12-08 19:58 GMT+01:00 Ben Boeckel : > On Mon, Dec 07, 2015 at

Re: [Paraview] ParaView Environment Variables

/merge_requests/511 Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-10-19 19:31 GMT+02:00 Cory Quammen : > Hi Bill, > > This is a good project. Perhaps we can include a version of your man page > in the user's guide when it

Re: [Paraview] 'Plot Data' missing Points X/Y/Z as option for X axis on 5.0-RC?

worst for 5.0 final). Best, *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2015-12-09 20:48 GMT+01:00 Giuseppe Bilotta : > Hello, > > up until 4.4 I could use the Plot Data filter to plot any quantity > over any spatial coordinate for t

Re: [Paraview] OpenGL Backend Identification

where that #ifdefs VTK_OPENGL2 >> include >> > vtkRenderWindow.h? Or would we have to pull in that header just for >> that >> > macro? >> > >> > Shawn >> > >> > On Wed, Dec 9, 2015 at 11:54 AM, Tim Thirion >> > wrote: >> >

Re: [Paraview] Superbild for 5.0.0

Fabian, Superbuild scripts for PV 5.0 are already available in the superbuild repository: https://gitlab.kitware.com/paraview/paraview-superbuild/commits/master Git master will do the job! I agree that we should add a tag for it (note to Utkarsh ;) ). Best, Joachim *Joachim Pouderoux

Re: [Paraview] GenerateGhostArray in a programmable source

assertion is not valid for your case. Best, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-02-22 17:33 GMT+01:00 Favre Jean : > > I am prototyping an AMR output, using programmable source. > having trouble setting up the

Re: [Paraview] CellDataToPointData much slower in 5.0?

Ruggiero, Could you give us the whole pipeline involved here? As you are processing temporal data, CellDataToPointData might not be the problem here: the reader might be the cause. Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-02-23 15:

Re: [Paraview] CellDataToPointData much slower in 5.0?

looks like what is slow is coloring by a PointData array (choose a celldata array and is fast)... @Ken: any idea why this happens? is it something that has been fixed recently? Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-02-23 16:2

Re: [Paraview] CellDataToPointData much slower in 5.0?

Even more strange: it is slow only with one of the point data array (scalar), with the other it is OK. *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-02-23 16:46 GMT+01:00 Joachim Pouderoux : > Wow, this is indeed very slow. > Looking at t

Re: [Paraview] Paraview 5.0.0 pdf, eps, svg export

.. and the adaptation of this module this new rendering backend is still in progress. To enable this feature again you will have to compile ParaView 5.0 with the legacy OpenGL(1) rendering backend, or use a previous version of the software (4.4). Best, *Joachim Pouderoux* *PhD, Technical Expert* *K

Re: [Paraview] [Catalyst] Setting the MPI Comm in Python

Hi, Regarding the initial problem, would it be useful to add a new method Initialize(vtkMPICommunicator* comm) to vtkCPProcessor? - it should be quite straightforward to do. Best, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-03-10 16:

Re: [Paraview] Background in 3D mode

Hi Cindy, Not totally sure to understand - are you trying to apply an Image or Gradient background and would like it to be correctly split over the different screen? If so, I am afraid this feature is not supported. Best, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <h

Re: [Paraview] Bug in XDMF reader ?

Houssen, Could you specify which reader you are using? xdmf2 or xdmf3? You mention PV5.0.0 - do you mean it used to work with previous releases? Best, *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-05-16 16:55 GMT+02:00 houssen : > Hello, >

Re: [Paraview] paraview superbuild on Win7 with ninja/vs2013/qt4/mpi

Hello, Did you compiled ninja using your VS2013? Do you start ninja from a Visual Studio 2013 command line (so that cmake can find VS compiler in the environment)? Regards, *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-05-19 7:49 GMT+02:00 st

Re: [Paraview] Bug in XDMF reader ?

Franck, Feel free to fill a bug on ParaView bug tracker here: http://www.paraview.org/Bug Best, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2016-05-25 16:33 GMT+02:00 houssen : > Got no news. Should I file a bug ? If yes, how ? &

Re: [Paraview] Coordinate Result from Calculator

Michal, Maybe I did not correctly understand your question but if you want to access point coordinates in the Calculator, they are available through the (pseudo) scalar variables coordsX, coordsY and coordsZ - you will find them in the Scalars list button. Regards, *Joachim Pouderoux* *PhD

Re: [Paraview] Paraview 5.1 Parallel & Delaunay

ounter-clockwise order in input too. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-07-21 8:25 GMT+02:00 stephaneンドング メファネ : > Hello, > > I would like to report a few problems encountered on Paraview 5.1. >

[Paraview] ANN: VTK/ParaView Training Course in Lyon, France, May 21-22

://www.kitware.com/products/protraining.php?course=05/21/2013 (in English) or http://www.kitware.fr/products/protraining.php?course=05/21/2013 (in French) Note that the course will be taught in English. If you have any question, please contact us at formations at http://www.kitware.fr Thank you, *Joachim

[Paraview] ANN: VTK/ParaView Training Course in Lyon, France, September 24-25, 2013

r Thank you, *Joachim Pouderoux* *PhD, R&D Enginee*r *Kitware SAS <http://www.kitware.fr>* ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages

[Paraview] ANN: VTK/ParaView Training Course in Lyon, France, February 11-12, 2014

the course will be taught in English. If you have any question, please contact us at formations at http://www.kitware.fr Thank you, *Joachim Pouderoux* *PhD, R&D Enginee*r *Kitware SAS <http://www.kitware.fr>* ___ Powered by www.kitware.com V

[Paraview] ANN: VTK/ParaView Training Course in Lyon, France, September 30th & October 1st, 2014

r http://formations.kitware.fr/browse/24 <http://formations.kitware.fr/browse/48>(in French) Note that the course will be taught in English. If you have any question, please contact us at formations at http://www.kitware.fr Thank you, *Joachim Pouderoux* *PhD, Technical Expert* *Kitwa

[Paraview] ANN: ParaView Training Course in Paris, France, October 14-15, 2014

and registration details at either: http://training.kitware.fr/browse/71 (in English) or http://formations.kitware.fr/browse/71 (in French) Note that the course might be taught in English. If you have any question, please contact us at formations at http://www.kitware.fr Thank you, *Joachim

Re: [Paraview] [Paraview-developers] Paraview architecture

/analysis (in this case, this will not scale of course : eg. if you plot a huge UnstructuredGrid within a Line Plot view after applying the Plot Data filter)... Hope it helps, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS <http://www.kitware.fr>* 2014-11-24 12:17 GMT

Re: [Paraview] Data structure type

t it. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-10-28 19:48 GMT-04:00 Moreland, Kenneth : > Chris, > > > > Ultimately to represent your data in the way you describe, you will need > to stor

Re: [Paraview] Problem using ensight gold files.

Julio, To help you we need to reproduce the bug so pleae send us at least one file that makes the reader crash. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-10-27 14:02 GMT-04:00 Julio Mendez : > Dear Commu

Re: [Paraview] Polyhedral Cells: Rendering Problem with OpenGL...

t but you could need if data is not triangulated. J. *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-10-26 9:23 GMT-04:00 Ken Martin : > Basically it is OpenGL, in that OpenGL doesn't automatically tessellate >

Re: [Paraview] Nastran file

wiki pages that can be used to help you in this task. Through a support contract, Kitware can also assist you or do the development for you. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-09-02 4:31 GMT-04:00 st

Re: [Paraview] Nastran file

Actually, it looks like Visit can read NASTRAN files. It means theorically it should be possible to quite easily read them through ParaView's VisitBridge component. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>*

Re: [Paraview] Big data set very slow to load (over 500Mb, Gb...)

ess Id Scalars) should show better result. Problem is that D3 takes time to perform and if your data is temporal, it will be run at every timestep! Hope it helps! A+ et bon courage :) Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitwa

Re: [Paraview] empty xdmf-file causes paraview crash

Hi Tommy, I have tested with ParaView 5.2 and it works as expected, no crash. Xdmf reader has been patched at different places since 5.0 and ParaView also comes with an optional Xdmf3 reader. Thus I would recommend that you update your ParaView to 5.2. Best, *Joachim Pouderoux*, PhD *Technical

Re: [Paraview] Modify Orientation Axes

Hi Nicolas, Unfortunately, in recent versions ParaView does not offer (in the GUI) the possibility to customize the orientation axes (except label color). I am curious, in which version did you have to possibility to change more options? Best, *Joachim Pouderoux*, PhD *Technical Expert

Re: [Paraview] Modify Orientation Axes

-general> and ... cross your fingers ;) Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-11-28 11:24 GMT-04:00 Nicolás Guarín-Zapata : > Hello Joachim, > > > > Unfortunately, in recent version

Re: [Paraview] Unable to load binary or vplot files

Open File dialog of ParaView just select "frame*.png" item. Thus each file will be considered as a timestep of the time serie. Hope it is clear, Best *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-11-30 13:15

Re: [Paraview] Filter with variable outputs as plugin

Hi Gerald, To give a name to the different ports of your filter in ParaView, you need to add some "OutputPort" hints to the definition of your filter's proxy. ... ... Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Tea

Re: [Paraview] Filter with variable outputs as plugin

mb->SetBlock(i, polydata[i]); mb->GetMetaData(i)->Set(vtkCompositeDataSet::NAME(), polyDataName[i].c_str()); } Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2016-12-05 9:42 GMT-04:00 Lodron, Gerald : &g

Re: [Paraview] vtkImageData Plugin, vtkImageData not rendered

Hi Gerald, Not sure it is the only issue but please try giving a name to the output scalar arrays. ParaView won't make visible arrays which don't have a name. Example: output->GetPointData()->GetScalars()->SetName("values"); Best, *Joachim Pouderoux*, PhD *

Re: [Paraview] [Paraview-developers] vtkImageData Plugin, vtkImageData not rendered

ld you write your "output" image data to a .VTI file using a vtkXMLImageDataWriter after initializing it in your RequestData function and see if you can load in with PV and view it? Share it if you can't. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing T

Re: [Paraview] [Paraview-developers] vtkImageData Plugin, vtkImageData not rendered

OK. That's weired, your VTI is correct. And what if you save the output of your filter/reader with ParaView "Save Data"? Is data correctly saved and reloaded correctly? Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.k

Re: [Paraview] [Paraview-developers] vtkImageData Plugin, vtkImageData not rendered

Could you share the code of your reader? If you prefer you can remove all specific stuff and keep only VTK related stuff. I would like to see how exactly you fetch the output grid to fill and how your filter defines its output. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific

Re: [Paraview] [Paraview-developers] vtkImageData Plugin, vtkImageData not rendered

ase. Something like: if (this->HasNewData()) { this->OLatest = this->m_poInternal->GetLatestImageData(); } if (this->OLatest) poOutput->ShallowCopy(this->OLatest); Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing

Re: [Paraview] STL files: normal and vertex

how you call servermanager.Fetch() and what you are doing next to retrieve your normals? Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-02-14 7:32 GMT-04:00 ufdup : > Dear all, > > I have a cont

Re: [Paraview] ParaView 5.3.0 and VTK-m

roject(vtkm DEFAULT_ON DEPENDS tbb cxx11 CMAKE_ARGS -DBUILD_SHARED_LIBS:BOOL=${BUILD_SHARED_LIBS} -DVTKm_ENABLE_TBB:BOOL=${tbb_enabled} -DVTKm_ENABLE_RENDERING:BOOL=OFF -DVTKm_ENABLE_TESTING:BOOL=OFF -DTBB_ROOT:PATH=) Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scie

Re: [Paraview] Automating contour isosurface values in parallel Catalyst Python script

proxy's declaration at filters.xml:~11725). Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-02-13 17:31 GMT-04:00 Yvan Fournier : > Hello, > > I'm in the process of migrating some VTK sc

Re: [Paraview] Problems with writing VTK in MPI

ssed. So I guess there is a bug in your writing procedure but it is not possible to tell more without analysing its source code. Best regards, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-03-29 16:31 GMT-04:00 José

Re: [Paraview] ParaView 5 Crashes on macOS (Sierra)

Hi, We are indeed working on the integration of a third party plugin to read Gmsh data into ParaView. Please take a look here <https://gitlab.kitware.com/paraview/paraview/blob/9a814de98bb5cfcf7883cacb11013db11ecab832/Plugins/GmshReader/README.md>to know more about this plugin. Best, *J

Re: [Paraview] Paraview crashes when using point gaussian

regards, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-07-19 7:14 GMT-04:00 Mathieu Westphal : > Dear Gabriel > > I can't access the files : > " > The page isn’t redirecting properly > > Fi

Re: [Paraview] Compute quartile from cell data

Hi, You are right about this limitation. It happens because originally this feature has been developed to analyze series. However, it could be quite easily ported to any other dataset. Maybe you could add an entry on the ParaView bug tracker about? Best, Joachim Le 30 août 2017 16:14, "Cornelis

Re: [Paraview] "Reload Files" Hotkey Acting on Individual Items --- Expected?

GetSources().items(): ReloadFiles(v) Best regards, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-09-29 14:12 GMT-04:00 Joel Kulesza : > Colleagues: > > In the File menu I would expect that the "Reload

Re: [Paraview] [EXTERNAL] pvserver MPI issue

do not use the mpiexec that correspond to the MPI library used to compile PV. Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-10-16 13:23 GMT-04:00 Quentin d'Avout : > Hi Joachim, > > > > I’m run

Re: [Paraview] [EXTERNAL] pvserver MPI issue

To be more specific, you have to run something like: $ /pathToPV5.0/lib/paraview-5.0/mpiexec -np 32 /pathToPV5.0/bin/pvserver Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-10-16 13:27 GMT-04:00 Joachim Pou

Re: [Paraview] pvbatch

-DENABLE_mpi=OFF -DENABLE_mesa=ON ** ../paraview-superbuild Do you encounter any issue with such kind of setup? Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-11-12 23:42 GMT+01:00 Scott, W Alan : > What are

Re: [Paraview] TimerEvents not fired while dragging mouse in vtkRenderWindow

Kolja, As it is a VTK Python related question, please address this issue to the VTK mailing list instead. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-11-12 17:15 GMT+01:00 Kolja Petersen : > Heya, >

Re: [Paraview] Information tag in xdmf file crashes paraview

Hello, Could you provide more details on the issue you described? - What version of ParaView are you using? - Which version of the ParaView XMDF reader do you use (2 or 3)? Providing a data sample with an example of the tag you are trying to add could be very helpful too. Best, *Joachim

Re: [Paraview] Error reading timeseries with spatial grid collection with XDMF

Nikos, It looks like you are using the Xdmf2 based reader. Did you give a chance to the one based on Xdmf3? What version of ParaView are you using? Can you provide a full dataset we could use to reproduce the issue? Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team

Re: [Paraview] Does pv support mili

Jourdain will be able to give more details on it... Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-11-15 1:09 GMT+01:00 Scott, W Alan : > Hi all, > > I had a person come up to my demonstration at

Re: [Paraview] particle traces from point data

Alex, I think here the filter "Temporal Particles to Pathlines" should do the trick. Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-11-29 14:33 GMT-04:00 Alex Barrie : > Hi, > > I have

Re: [Paraview] vtkDiscreteMarchingCubes point/cell arrays from XML-PV plugin

().GetPointData().GetScalars() if inputpds != None: inputpds.SetName("PointScalars") inputcds = self.GetInput().GetCellData().GetScalars() if inputcds != None: inputcds.SetName("CellScalars") Do not forget to check the "Copy Arrays" option for sure. Best,

Re: [Paraview] particle traces from point data

Alex, Could you specify how is your data split over time? Do you have one file per timestep? How do you load your data with ParaView? Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-11-30 9:55 GMT-04:00 Alex

Re: [Paraview] particle traces from point data

Alex, Again, could you specify how you are loading your files? If you open them as a file series, then your data should be considered as temporal and the filter should work. See https://www.paraview.org/Wiki/Animating_legacy_VTK_file_series Best, *Joachim Pouderoux*, PhD *Technical Expert

Re: [Paraview] particle traces from point data

Alex, The problem appears because the output of this Visit-based reader is a multiblock. Here is a workaround: apply a *Merge Block* filter on your input data, then apply the *Temporal Particles To Pathline* filter. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team

Re: [Paraview] More fonts?

*Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-12-04 14:19 GMT-04:00 Quentin d'Avout : > Hi all, > > I'm using 5.0.1, and would like to use other fonts than the default > Arial/Courrier/Times.

Re: [Paraview] Memory issue for remote visualization

Dennis, I guess in this case, the memory inspector shows the process memory limit (RLIMIT_AS) and not the system memory size. Did you consider the use of `ulimit`? You can calling something like: ulimit -u unlimited Best, Joachim *Joachim Pouderoux*, PhD *Technical Expert - Scientific

Re: [Paraview] open .pvsm file

file explorer. Best, *Joachim Pouderoux*, PhD *Technical Expert - Scientific Computing Team* *Kitware SAS <http://www.kitware.fr>* 2017-12-18 11:22 GMT-04:00 mirko heuegger : > Hello! > > Paraview.exe has an command-line option for loading state-files: > paraview.exe --state=