Hi Peiman, I have tried the warp patch on my osx 10.8 laptop with csound6
installed, but get the error on the console [curve]: list must contain 3
elements for each vortex.
Any clues?
Nick
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and
I also found that powering off a 2amp 5v usb hub gave dramatically better
results. Full duplex two channels at 44.1khz without dropouts.
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Hello Dan, could you please add me to your list for the pdparty/testflight app
many thanks Nick Burge
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Is it possible to build a 64 bit version of pd vanilla for osx 10.7 (x86_64
plus i386) that will run 64 bit and/or 32 bit externals?
I tried ./configure --enable-universal, which creates the makefiles, but the
build fails with:
llvm-gcc-4.2: -E, -S, -save-temps and -M options are not allowed
Hello list, i am trying to compile iemmatrix for use in pd vanilla 0.43.0
Following instructions on a recent post.
I have set up the Xcode command line tools on my mac powerbook and type:
make
CONFIGUREFLAGS=--with-pd=/Applications/Pd-0.43-0.app/Contents/Resources/src
aclocal runs, autoconf
but I'm a bit clueless at the
moment, but I use to run the patch on several Ubuntu machines and
never encountered this problem before.
Best,
Marco
On Wed, Feb 23, 2011 at 10:33 PM, Nick Burge
nbu...@virginmedia.com mailto:nbu...@virginmedia.com wrote:
Hi Marco, I
encountered this problem before.
Best,
Marco
On Wed, Feb 23, 2011 at 10:33 PM, Nick Burge nbu...@virginmedia.com
mailto:nbu...@virginmedia.com wrote:
Hi Marco, I uninstalled compiz in synaptic but the crash is still
happening. Yes, I can bang the other bangs and I see the help
patches
Dear List, trying to start the Marco Donnarruma's patch C[]NTR[]L it
instantly crashes PD.running from a terminal I get this:
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request:
...@gmail.com wrote:
bis repetita :
nah, it's false problem i think...
giss.tv ( which i admin also ) had some problems today,
try again tomorrow
saludos,
sevy
Nick Burge wrote:
Trying to connect to giss.tv with the pidip patch: giss-pdp-dv.pd I
get this...
pdp_theonice~ : connection
Trying to connect to giss.tv with the pidip patch: giss-pdp-dv.pd I get
this...
pdp_theonice~ : connection thread -1339835536 launched
pdp_theonice~: connecting to port 8001
pdp_theonice~: logged in to source.giss.tv
pdp_theonice~: connecting child -1339835536 exiting
pdp_theonice~ :
On 08/26/2010 07:49 PM, pd-list-requ...@iem.at wrote:
Re: [PD] Video codec advice
Hello Hans, I was attempting to run your video player patch on my ubuntu
10.04 laptop using pd-extended 0.42.5 ...the objects all load except for
mimtimefile.which will not create.
Which library am I
H
mjpeg transcoded videos immediately crash pd/Gem and force the program to quit
on my lucid 10.04 laptop as soon as I try to open them in a pix_movie patch
Opening a pix_movie object the console reports my version of Gem to have been
compiled with quicktime support and libmpeg3 support
Hello List, trying out the youtube2PD patch it all seems to work up to
the point where I try to play back the transcoded video file. This
causes pd to crash and exit.
I'm on linux ubuntu 10.04
I can play the transcoded files back using another application like
movie player or vlc, but Gem,
Hi List, I've compiled the syncgrain and fluid externals from the
footils department, but both seem to crash the pd program as soon as I
try to open either of the objects.I'm on linux ubuntu lucid 10.04
Does anyone have these externals working under that system?
Nick.
Nick Burge wrote:
I would like to use pd to control some lights via a wii device. I am
on linux 10.04.
I have the wii up and running in pd, I have compiled dmx512 from the
iem repository, and have the objects dmxin and dmx out in my
pd/extra directory. Since these objects depend upon dmx4linux
that.
Nick
On 06/18/2010 05:04 PM, Jack wrote:
If you can read french :
http://www.interface-z.com/produits/com09_mididmx.htm
It transforms MIDI protocol to DMX protocol.
It works on all platform (test here on MacOSX and Ubuntu Lucid).
++
Jack
Le vendredi 18 juin 2010 à 16:30 +0200, Nick
I would like to use pd to control some lights via a wii device. I am on
linux 10.04.
I have the wii up and running in pd, I have compiled dmx512 from the iem
repository, and have the objects dmxin and dmx out in my pd/extra
directory. Since these objects depend upon dmx4linux I tried to compile
Hello list.Intrigued by the idea of playing back jpeg (or other) files
as audio signals I've been having a go with the readsf~ and soundfiler
objectsskipping the header with readsf~ and using the -raw flag in
soundfiler, opening in an array and using tabplay~ to play it backwhilst
I
I had exactly the same messages when installing my firewire interface
(fireface400)and attempting to get the 8 ins and outs that should have been
available.
By changing the samplerate from 44.1 to 48khz in audio settings I was able
to get the thing workingthe system clock of the interface
Hello Oded.
I use wireless contact mics in a couple of projects. Both requiring freedom
of movement for the object to be miked up.
(See the links below)
http://www.myspace.com/entretenidos
http://www.cryingoutloud.org/event_stretch.php
I make my own pickups (piezo ceramic discs) and pre-amps:
Ok I fixed itI got my 8 channels working under the MMIO driver using a
sample rate of 48000.44100 is not supported for more than 2 channels it
seems.
There was a message in the command prompt suggesting I use Capability
function to discover supported formats
Anyone know what that is all
Hi Andrew and Joao, thanks for your replies.
In the bin directory there are 2 different PD executables, one of which
provides a msDOS command prompt which displays errors as you go. I can also
test the results of changes that I make using the provided test audio and
midi patch, which has built
Hello List, I have trouble with an RME fireface 400 using the windows ASIO
driver on a laptop.
It works fine under Ableton Live on the same machine, giving me the
prescribed 8 inputs and 8 outputs, but with PD i am limited to 2 in and 2
out.
I have tried using the channels, audioindev and
Thanks Hans, I'll try the new firmware.
Nick.
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 26 September 2008 20:04
To: nick burge
Cc: pd-list@iem.at
Subject: Re: [PD] pduino and xbee
The arduino forums are probably a better place for this question. But...
I'd guess
Hello list. Does anyone know if pduino/firmata is compatible with using the
xbee shield on an arduino??
I know the arduino for pd input system works with it. But its only good for
analog input.
thanks. Nick Burge.
___
Pd-list@iem.at mailing list
Trying to open the select-help patch crashes Pd-0.40.3 rc1 on my Windows
Vista system.
I can't seem to replicate the crash with other help patches.
How strange is that?
Nick.
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
I also have problems with an RME fireface (400 model in my case)
I cannot get PD to make use of the asio fireface driver to give me full
duplex...I can only get input or output but not both.
Nick.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL
Try this link to medical sensors.
http://www.meas-spec.com/myMeas/industry/medical.asp
Nick.
___
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
. (Since we will be side
by side on the stage we could use a LAN cable connection)
Nick Burge.
___
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Hello List, does anyone know how to resolve the name conflict between the
scale object in maxlib and Gem?
I want to open the maxlib object , but the Gem object opens instead. (I want
to make use of both libraries simultaneously).
thanks, Nick Burge
Thank you Marius. I'm using the extended version, so yes, that works.
Nick.
-Original Message-
From: marius schebella [mailto:[EMAIL PROTECTED]
Sent: 17 April 2008 19:58
To: nick burge
Cc: Pd List
Subject: Re: [PD] scale object name conflict between Gem and maxlib
in theory, if you
Hello Martin, you are absolutely spot on here. In fact I want the numbers to
go up as I apply pressure so I've swapped the fsr and 10k as you suggest and
all works perfectly. No need for the expensive voltage divider then and more
difficult to calibrate several of them equally when a 10k
to do with it?
Nick.
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 12 April 2008 00:41
To: nick burge
Cc: Pd List
Subject: Re: [PD] pduino and FSRs
I use 6 analog inputs all of the time on Mac and Linux. I've never used
19200 tho. Try using [comport] alone to eliminate
17ec
01c89bd26543018e
Nick.
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 11 April 2008 18:30
To: nick burge
Cc: Pd List
Subject: Re: [PD] pduino and FSRs
Let's keep this on the list since it could be generally useful.
In order
robust, allowing me to activate all 6 analog inputs at
once.
Nick Burge.
___
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
been routing the data from the FSRs through the autoscale object.
Maybe I should find a way to reduce the amount of data being sampled...every
40ms for example? How would I do that?
Nick.
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 10 April 2008 17:25
To: nick burge
Cc
only activate 2 at a time before it all grinds to a halt...on arduino2PD i
can activate all six without any problem. Strange.
Nick.
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 10 April 2008 21:51
To: nick burge
Cc: Pd List
Subject: Re: [PD] pduino and FSRs
I've never
it not ? just like a DMX message...channel blah to level blah.
But I suppose it is a bit more complicated than that to actually make it
happen.
Nick.
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 05 March 2008 21:12
To: nick burge
Cc: Pd List
Subject: Re: [PD] Pduino
little idea how to do this.
Nick.
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 04 March 2008 14:39
To: nick burge
Cc: 'Pd List'
Subject: Re: [PD] Pduino and the AD5206 digital potentiometer
It would be possible to add support to Firmata for this, but it's not
currently
to have the
commands sent by PD...is that very difficult to do? Any clues anybody?
Nick
_
From: Hans-Christoph Steiner [mailto:[EMAIL PROTECTED]
Sent: 05 March 2008 16:50
To: nick burge
Cc: Pd List
Subject: Re: [PD] Pduino and the AD5206 digital potentiometer
I am unlikely to write
for a clue.
thank you for your attention, sincerely, Nick Burge.
___
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
41 matches
Mail list logo