There are the Li-Fe batteries from rc planes or cars. This chemistry is
more resilient and at the same time very little self discharge compared to
li-on. They do have less kick out, but since you wouldn't need more than
2 or 3 amps you are more then ok. Search for chargers and batteries on
I did managed to run puredata on a beagleboard clone (igepv2) the audio IC
on the beagle and clones is really bad, but with an external USB interface
it works very well. I did tried a pitchshifter patch and ot worked.
Better yet is to use LibPd. I also tried it using a puthon wrapper, amazing
and
It is not dificult to setup, provided that the usb device is supported by
alsa/kernel. The latency depends greatly of the device cpu, kernel, driver
etc. Low latencies like 4 ms seems to me hard to achieve.
No dia 1 de Nov de 2011 13:07, i go bananas hard@gmail.com escreveu:
Hi Ricardo,
If you want to use more than 3Gb of ram, you can use a PAE kernel. This i386
kernel with a patch for extension of the adressable memory.
No dia 24 de Set de 2011 20:42, Hans-Christoph Steiner h...@at.or.at
escreveu:
If you need to access more than 3GB of RAM in Pd, then use 64-bit. If
you are
://pastebin.ubuntu.com/566725/
Patch attached.
thanks for any help
Ricardo Lameiro
--
Fagote / Contrafagote
Bassoon / Contra-bassoon
http://myspace.com/ricardolameiro
#N canvas 486 105 307 421 10;
#X obj 41 275 hip~ 5;
#X obj 96 103 unpack;
#X obj 97 195 osc~;
#X obj 96 127 moses 1;
#X obj 41 213 *~;
#X
Yes, that was my first try.
2011/2/17 patrick pured...@11h11.com:
I want to use fiddle~, so I went to the extra folder, compiled it,
(make fiddle~) then I grabbed fiddle~.pd_linux and copy it to
“/usr/local/lib/python2.6/dist-packages/” (where pylibpd is).
did you try to put
Nothing like that, just an error related to the absence of jack server running.
python octa.py
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
Well, it seems it was related to the compiling of fiddle~. it wasnt
linking to pylib.so. Peter Brinkmann just post a work around at
http://noisepages.com/groups/pd-everywhere/forum/topic/python-libpd-externals-etc/#post-1392
time to test it out :D
2011/2/17 Ricardo Lameiro ricardolame
Yeah, I checked out you page on libpd... it was it that push me to try
the python stuff.
It is working now. I do need to have the external on the same folder
of the patch/script
2011/2/17 patrick pured...@11h11.com:
Confirmed, i can reproduce your problem. No error, but fiddle doesn't
I am a newbie in electronic music (not dance music by the way, electronic in
the broad sense) but i am also a classic musician, teacher, I also played
in traditional music groups etc... background aside here goes the idea.
A long time ago, in the renaissance and before, a third and a sixth were
Great reference to 4:33 Jonathan :D
--
Fagote / Contrafagote
Bassoon / Contra-bassoon
http://myspace.com/ricardolameiro
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
doesnt Ladish does that? (http://ladish.org/)
What do you mean with turn audio on at startup? on Pd? you can send a
loadbang to a message to turn the dsp on... but maybe that isnt what you
want...
2011/1/17 Pierre Massat pimas...@gmail.com
Thank you Marco, but I don't need to run many apps.
If you are using linux or Mac osX you can use JACK to route the audio the
way you want without latency drop. I dont know if the JACK's windows port is
usable or not.
bye
2010/11/25 ronni montoya ronni.mont...@gmail.com
HI , is it possible to send sound from pd to supercollider? i would
like
For now, FireWire devices are the ones that really gain with a RT kernel.
The generic Kernels are becoming more and more timing eficient, they
absorbed a lot of the RT patches made by Ingo Molnar et al. I dont know why
didnt Ubuntu worked on your computer. If fedora worked, ubuntu should also
Ricardo, congrats. All channels working? Or a stereo
duplex(in+out) only?
Best regards,
Pedro Lopes
On Sun, Nov 14, 2010 at 3:37 PM, Ricardo Lameiro ricardolame...@gmail.com
wrote:
As Far as I tested it, yes. I tried 10.10 with a FA-101 and without RT
kenel and already with the new
thats awesome. I dont know how to properly package debian .debs, maybe some
day I will try. It would be awesome to have all pd extended in debs :D
maybe making a meta-package like pd-extended-full :D
2010/11/11 Hans-Christoph Steiner h...@at.or.at
In case you haven't been following it, we have
Hi Nic, for what I read about it, I think microsound, isn't really a Genre,
but more a technique.
There are diferent ways to go using microsounds, for instance one of the
most used/known is the granular synthesis.
You can search some stuff from Curtis Roads, he made a lot of digital
granular
there are some Python modules that work with Pd.
http://pypi.python.org/pypi/purity -Purity AFAIK its a dynamic patching
module
http://puredata.info/Members/thomas/py python integration with
Puredata. check them out, maybe its what you need.
2010/10/14 Achim Bloch achim.bl...@yahoo.fr
I am just thinking out of my head,
maybe you could send via serial someting like
IR
and then the ir value, on the PD side you make a route [route IR FX XPTO]
It should rout the data
now i am not sure if it will work just with spaces separating them, or maybe
with CR, but if you have the
Hi Simon,
Did you check if the jack server was running properly? and if you where
connected to it, use qjackctl or patchage for it. its weird to have that
error message with JACK. Did you tried to run Pd with in realtime mode?
2010/9/19 Simon Cossar scos...@telus.net
Hello list - I am trying to
well it is true. The internet is full of outdated and misleading
information. due to its nature linux is ealways evolving, really fast
2010/9/20 simon cossar scos...@telus.net
On Mon, 2010-09-20 at 12:54 +0100, Ricardo Lameiro wrote:
Hi Simon,
Did you check if the jack server was running
maybe that Pd is getting into Cycling market?
2010/9/20 Dan Wilcox danomat...@gmail.com
I have heard rumors from various sources that Cycling 74 may change the
pricing scheme of Max to include a limited version for free. If true, what
does this mean for Pd?
Dan Wilcox
try to put some medium sized resistor in series with the piezo and see if it
gets more tangible data input. Piezzos can output very high voltages.
2010/9/20 david lemarechal d_lemarec...@yahoo.fr
Hi
I think the easier way to get info from the piezo is to plug it in a sound
card preamp and
@bernardo. you should compare also how many employees does red hat have and
canonical. and also red hat wasnt always the saint you think. people like
ubuntu because are tired to config things everytime. so even if they
contribute less i dont care. its open source. the code is there
Em 2010/09/14
you can also join the #dataflow channel on the IRC network @
irc.freenode.net, to talk realtime. you have a lot of resources for pd. for
instance at puredata.info, but also others around the web.
2010/9/10 Mathieu Bouchard ma...@artengine.ca
On Fri, 10 Sep 2010, jm jones wrote:
Max forums
you can also join the #dataflow channel on the IRC network @
irc.freenode.net, to talk realtime. you have a lot of resources for pd. for
instance at puredata.info, but also others around the web.
2010/9/10 jm jones juan...@gmail.com
Hi, Im learning PD-Max/msp. Im trying both, and seems that
Because Pd needs exclusive access the audio card. Jack abstract that
creating various streams of audio data and then routing it to the playback
device.
2010/6/30 Matteo Sisti Sette matteosistise...@gmail.com
On 06/30/2010 08:41 PM, Pedro Lopes wrote:
I strongly advise using Jack as the audio
Not the best and efficient way, but you could try a virtual machine, if it
is only for testing the GUI rewrite.
The problem is that both install to the same folder and also have the same
binary name puredata, you could try to change the make file to change the
binary name and also the install path
, and by the nature of its working, they could hang easily
a computer, keeping only processing an high prio task.
If I said something wrong, please correct me, I have looked at this stuff
since a year to try to understand it better, so if someone can explain it
better, please do.
Ricardo Lameiro
2010/6/26 Andre
I am just guessing in here. But since DMX is a serial protocol, maybe you
can send the output of the DMX object and feed it to a comport and send the
data to your USB device. Its a long shot, and it probably wont work. But
you can try :D. I normally only used DMX on arduino, making a patch to
Bernardo, BSD licens also is free software. There are a lot of different
free software license. not only GPL, and Puredta is not GPL.
2010/6/14 Bernardo Barros bernardobarr...@gmail.com
I think it *have to be* GPL (v.3), since PD is free software, doesn't it?
No problem, it is a common situation :D AFAIK Pd is in some kind of BSD
license, i think a modified BSD, but not sure.
2010/6/14 Bernardo Barros bernardobarr...@gmail.com
I though PD was GNU/PGL
On 14 June 2010 11:53, Ricardo Lameiro ricardolame...@gmail.com wrote:
Bernardo, BSD licens
Actually, an arduino is more than enough for what you want. you can have
data from 0 to 1023, that is quite a lot, plus, you can use it directly on
puredta using pduino, no need for OSC.
2010/6/8 Pierre Massat pimas...@gmail.com
A gamepad would definitely be LESS precise as each potentiometer
Hans look at ARandaR, it will let you place the outputs where you want.
Patrick, maybe it needs to be linux, because it needs to be reliable,
something very hard to achieve in windows machine (by my own experience...)
2010/6/3 Pagano, Patrick p...@digitalworlds.ufl.edu
Hans
Does it have to be
As far as i know, not all the externals are enabled by default on
pd-extende, maybe try to do [import mrpeach] and see if it works, other way
you can do it is choosing the folder of the external you want on file -
startup and add the name of the folder with the external you want, this way
it will
FTW! chris, awesome :D
2010/5/21 Georg Holzmann g...@mur.at
Hey Chris !
Very nice - will have a look at it ... ;)
LG
Georg
chrism schrieb:
http://mccormick.cx/dev/webpd/tests.html
For sound you will want these builds of Firefox:
https://wiki.mozilla.org/Audio_Data_API
Source
mine worked flawless, i am on ubuntu 10.04 and i downloaded a firefox buid
firefox-3.7a5pre.en-US.linux-i686-audio-data-api-12.
2010/5/21 Pagano, Patrick p...@digitalworlds.ufl.edu
Works but locks up the browser Minefield
-Original Message-
From: pd-list-boun...@iem.at
As far as I know, the pduino is not made for the arduino mega. so it could
work, but you need to test it out. also the firmata firmware would need also
some tweak since the mega has more outputs/inputs and analog ports
2010/5/19 Andres Ferrari an...@yahoo.com
hello,
When I use the abstraction
Ricardo Lameiro ricardolame...@gmail.com
As far as I know, the pduino is not made for the arduino mega. so it could
work, but you need to test it out. also the firmata firmware would need also
some tweak since the mega has more outputs/inputs and analog ports
2010/5/19 Andres Ferrari
On Tue, May 11, 2010 at 8:34 PM, Ricardo Lameiro
ricardolame...@gmail.com wrote:
well, i have it working on xubuntu on old iMacs (the 266Mhz and 400Mhz)
and
it works. at least vanilla Pd
2010/5/11 Pagano, Patrick p...@digitalworlds.ufl.edu
I have it running with ubuntu on a G4
well, i have it working on xubuntu on old iMacs (the 266Mhz and 400Mhz) and
it works. at least vanilla Pd
2010/5/11 Pagano, Patrick p...@digitalworlds.ufl.edu
I have it running with ubuntu on a G4 and it works very well
-Original Message-
From: pd-list-boun...@iem.at
Hello list,
Well i do have in mind some ideas i want to implement with pd/hardware, one
of them is using a single board computer to run pd
without GUI, just using some little lcd screen. Maybe using a beagle board,
that features a ARM Cortex A8 that has some floating point support, with the
NEON
http://autobuild.puredata.info/auto-build/
has versions for ubuntu 9.10
2010/5/1 Emerson Aagaard emerson.aaga...@gmail.com
Hello all,
I'm somewhat new to Linux: I've been using it for about a year, but not
very heavily (no development type stuff or anything), and I've also been
using pd
send a message to the object [arduino] with the text [devices it will list
the serial port devices on the pd console and the number associated. look at
arduinot-test.pd inside the pduino folder
2010/4/24 Camilo Cadavid Corredor cccada...@hotmail.com
Hello,
I just got started working with
and after that you can look into this
https://help.ubuntu.com/community/UbuntuStudioPreparation
It may help you.
and also, AFAIK you can instal the package ubuntustudio controls to help you
to set some configurations.
2010/4/22 Ariane stolfi arianesto...@gmail.com
hi,
I don't know if you
from Miller's Source package license.txt
This software is copyrighted by Miller Puckette and others. The following
terms (the Standard Improved BSD License) apply to all files associated
with
the software unless explicitly disclaimed in individual files:
Redistribution and use in source and
I think than in the rjdj lib, or inside the rjdj's composer pack, is a
e-piano patch. I kinda liked it. For sure you will use a lot less ram :)
On 15 Apr 2010 13:46, tim vets timv...@gmail.com wrote:
Speaking of samplebanks, an interesting approach in pd would be to do a good
Rhodes modeling
Ricardo Lameiro wrote:
you should try to move into linux, its safer and pd works better in it
:D
Yes and that's the typical lame answer that puts off people from even
trying linux, and it also sounds so.. uhm.. mac :(
No dia 30 de Março de 2010 23:23, Ricardo Dueñas Parada
rduen...@gmail.com
You are right, I have a FA-101 . It works great, but it lack a mixer and
standalone operation. I regret dont wait and buy a sapffire, but i needed it
in short time, so i bought it.
I think is a good choice
2010/4/14 Marco Donnarumma de...@thesaddj.com
I'm considering to go for the Saffire PRO
Lol. Loved it. He he I was really believing ;).
On 1 Apr 2010 22:36, Mathieu Bouchard ma...@artengine.ca wrote:
Upcoming version numbers of GridFlow will drop the initial zero as it has
become evident that the numbering couldn't possibly get past zero otherwise.
GridFlow thus becomes one of the
that are CC licensed to include there. I also would like to have
some Graph patch that reacts to sound... as i am making improvisation on
them.
any help will be appreciated
Ricardo Lameiro
--
Fagote / Contrafagote
Bassoon / Contra-bassoon
http://myspace.com/ricardolameiro
thanks Vilson for the videos :D
2010/3/31 Vilson Vieira vil...@void.cc
2010/3/31 Ricardo Lameiro ricardolame...@gmail.com
Hello fellow list members.
I am making a concert with bassoon and electronics/Puredata effects, and i
would like to include some videos of pd on the show. The concert
Lorenzo lsut...@libero.it
Ricardo Lameiro wrote:
you should try to move into linux, its safer and pd works better in it :D
Yes and that's the typical lame answer that puts off people from even
trying linux, and it also sounds so.. uhm.. mac :(
No dia 30 de Março de 2010 23:23, Ricardo Dueñas
maybe pd is infected with a virus, or you have some stealth virus on your
system that comes to life when you run pd.
you should try to move into linux, its safer and pd works better in it :D
No dia 30 de Março de 2010 23:23, Ricardo Dueñas Parada
rduen...@gmail.comescreveu:
Hi, I´m recently
great Hans.
I love to see the kids wanting to learn and enjoining it.
I bet the room was a little bit noise ;)
2010/3/17 Hans-Christoph Steiner h...@at.or.at
Here's a video of a Pd workshop I taught with 11 year old kids in New York.
It was amazing how they picked it up and had so little
Man, just change chip. Use the 168 or the 328. and stop complaining, or use
google then. people told you what to do, now you should try it. this is open
if you want to help document it, so please do.
2010/3/10 Derek Holzer de...@umatic.nl
Where do I find the matching Pd Firmata objects for the
Derek, sorry if me post seamed to harsh or stupid :) iwas only trying to say
that you should use the 168 or 328 atmegas. If they don't have a programmer,
I found somewhere on the net, that is possible to programm the atmegas using
the arduino board. With little modification,
Sorry again, I didn't
Nice one.
very useful :D
thanks for the release!
2010/3/10 Roman Haefeli reduzie...@yahoo.de
Hi all
I dug into deb packaging and published the results on a PPA:
https://launchpad.net/~reduzierer/+archive/rdz-pd-extra+depshttps://launchpad.net/%7Ereduzierer/+archive/rdz-pd-extra+deps
I have the same problem. You should look into the jack control setup and
play around with the period and buffer. Pd with other than 2 periods start
to give lot of sync erros. The problem is that in a firewire device 2
periods is not enough.
So for me its a Pd issue in here. Try it with 2 periods
I am thinking in develop a device like you want.
You can think in using a beagle board beagleboard.org. It can run linux,
and you can install there PDa (PD anywhere). and the price is not bad. USD$
150.
2010/3/4 chris clepper cgclep...@gmail.com
You can try getting a development kit for a DSP
Sorry for hijacking the thread.
Hans, does the pd-mobile0.43 branch can be built for android?
I think it it is a more open platform to use, although you wil, maybe, need
to root the phone.
2010/1/21 Frank Barknecht f...@footils.org
Hallo,
David NG McCallum hat gesagt: // David NG McCallum
than
iphone. Mac is way to closed source to allow this kind of communication
without paying for it :D
Fred, I think it is not supported in the 1st gen ipod, because this device
lacks complete support to microphone, even with a ear plugs with mic. I have
one but it is 2nd gen.
Ricardo Lameiro
2010/1
hey
look at this link, it may help you
http://wiki.dataflow.ws/comport?highlight=%28comport%29
2009/12/7 Felix Obée fe...@amphibiousthoughts.com
Thanks for the help everybody!
As I understand it, the Arduino uses the FT232 for communication with the
computer. So it should be recognized by
also check this website.
You could check also the arduino site if you want to go into electronics.
PD and arduino are friendly :)
2009/12/3 Justin Glenn Smith noisesm...@gmail.com
tdrecordable wrote:
obama...
bump.
On Sun, Nov 29, 2009 at 10:57 AM, tdrecordable gateswideo...@gmail.com
sorry, forgot to post the site
http://lcdsmartie.sourceforge.net/
here it is
2009/12/3 Ricardo Lameiro ricardolame...@gmail.com
also check this website.
You could check also the arduino site if you want to go into electronics.
PD and arduino are friendly :)
2009/12/3 Justin Glenn Smith
Yeah, come tho the IRC channel.
Google Wave is still beta, really beta...
2009/11/30 Mathieu Bouchard ma...@artengine.ca
On Mon, 30 Nov 2009, Adityo Pratomo wrote:
Just out of curiosity, anybody here use google wave? I feel that this
platform is quite ideal for having real time
seem busy although I find it great as an idea.
On Mon, Nov 30, 2009 at 12:47, Ricardo Lameiro
ricardolame...@gmail.comwrote:
Yeah, come tho the IRC channel.
Google Wave is still beta, really beta...
2009/11/30 Mathieu Bouchard ma...@artengine.ca
On Mon, 30 Nov 2009, Adityo Pratomo wrote
Hi.
In Spain there is this University. its in Barcelona.
http://mtg.upf.edu/
http://www.upf.edu
In Portugal, there is also a PhD in Computer Music. languages are English
and Portuguese.
http://www.artes.ucp.pt/si/doutoramento/index.html
hope this help
2009/11/19 Konstantinos Benardis
Hi.
I am wondering if anyone made a package for ubuntu karmic?
the debs at the puredata.info, require libmagick++10, and this lib is not at
the ubuntu repos.
Is it really needed for GEM to have this lib? Or did someone ported GEM for
this LIB?
Also Who is the DEB Maintainer? maybe I its a good
playing audio. Pd does this on Mac OS X and Windows, so
it should do it on GNU/Linux as well. The only question is, what's the best
way to do this?
Audacity also has this problem, so I guess its not an easy one to solve...
.hc
On Nov 14, 2009, at 10:24 AM, Ricardo Lameiro wrote:
I think
I think that the problem is PulseAudio. When I try to start jack i really
need to shutdoen every program using the server (pulseaudio is a kind of a
server) so that jack has control over the sound card. Only after running
jack and starting the server, you can open Puredata and then select in media
Could be GIT or something. maybe being a mirror of the info that is actually
at puredata.info
2009/11/8 errordevelo...@gmail.com
Hello Fabio,
it could be fabulous to get have a stand-alone host for pd community
could be great! then we could have it as central SVN (or may be even
bazar?)
Hello all, sorry for this question, but I would like to know if is faster to
Analyze a sound using FFT, when the sound has more or less harmonics?
Is faster if the sound is less complex, or just more accurate?
--
Fagote / Contrafagote
Bassoon / Contra-bassoon
to solve this problem and also if the
20 ms latency is acceptable or not for a live performance, using PD as a
effect box with pitchifters, loopers, synth using fiddle etc...
P.S.I alsoio tried to use diferent values on PD's flags -audiobuf.
Sorry for this big and anoying mail.
Thanks
Ricardo Lameiro
74 matches
Mail list logo
