Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
OK. For your information, pulseaudio doesn't come with the new version of Raspbian apparently (I couldn't remove it cause it wasn't there !). No idea why. Pd seems to work a little bit with my soundcard, but after a couple of seconds everything freezes. I'll try with no gui in the coming days. Cheers, Pierre. 2013/7/3 Julian Brooks > > 'off Millers site' not 'of' > > And also another thing with the power supply. Although 1a is supposed to > be fine 2a actually works really well if you're driving any peripherals, > giving plenty of overhead. > > J > > > On 3 July 2013 14:31, Julian Brooks wrote: > >> Hey Pierre, >> >> I've installed Pd from the pre-compiled version of Millers site, and most >> recently built it from source which took a bit more doing but Miller very >> kindly walked me through the tricky bits (thread in archives "installing Pd >> from source on rpi" should bring it right up). The version from the repo's >> works just fine but I wanted to test out (though didn't end up making use >> of) [gpio] which requires 0.44 or later. >> >> I got the power supply from here: >> >> https://www.modmypi.com/5v-2A-modmypi-raspberry-pi-power-supply?filter_name=power%20supply >> >> The soundcard I've been using the most (ESI UDJ - thanks Antoine:) has no >> audio input so no good info on full duplex. I've been messing around with >> the imic running duplex (with usb-slowdown) and had been getting reasonable >> results (10-12ms) but running pretty light patches. Sorry can't be more >> precise as I haven't given this card as much attention. >> >> Regards, >> >> Julian >> >> >> >> On 3 July 2013 11:06, Pierre Massat wrote: >> >>> Hi Julian, >>> This Moebius distro looks very interesting. Can you please tell us how >>> you installed Pd ? From the Raspbian repos ? >>> Have you tried it with full duplex with your soundcard yet ? What >>> latency are you getting (I can't get below 15 ms in Raspbian with some fft >>> in my patch) ? >>> >>> Also is this think about the power supply true ? They mention it too on >>> the Satellite CCRMA webpage. Where can I buy a power cable that outputs 5.2 >>> V ? I'm currently using a samsung smartphone charger. >>> >>> That's a lot of questions but you made me curious (and hopeful again) ! >>> >>> Cheers, >>> >>> Pierre. >>> >>> >>> 2013/7/3 Julian Brooks >>> >>>> I'm having good results from using a much leaner install - it's called >>>> Mobius: >>>> http://moebiuslinux.sourceforge.net/ >>>> >>>> Obviously depends on your usage but I'm ssh'ing into the pi and works >>>> great. The minimal install seems to help with overclocking too so I reckon >>>> I'm getting about another 35-40% out of the pi. >>>> >>>> The main project I've been working on has a pmpd patch that the regular >>>> raspbian wouldn't even run, on top of that I'm driving a couple of sensors >>>> (thanks Martin:), audio synthesis, got a reasonably complex quad >>>> spacialisation patch (thanks Lorenzo:) and is driving a 6 channel >>>> soundcard. This is without the usb-slowdown option. >>>> >>>> Obviously it's pushing the Pi right up to the limit but it runs* >>>> just*about stably. >>>> >>>> What I do think made a significant difference was switching the power >>>> cable to one that outputs 5.2v so by the time it gets to the pi it's a >>>> solid 5v. >>>> >>>> Julian >>>> >>>> >>>> On 3 July 2013 09:42, Dan Wilcox wrote: >>>> >>>>> Yeah I tried that out a few months ago when we started the thread. >>>>> Jack adds some unnecessary overhead in my opinion and I'm surprised that a >>>>> device that should be more than capable to handle this is just not setup >>>>> correctly. I'm running a minimal commandline install and pd + realtime & >>>>> straight alsa should work great ... it has for me in the past. >>>>> >>>>> His jack setup basically uses *all* the cpu of the pi, so that cuts >>>>> out the other parts of my setup altogether .. visual, device input, etc. >>>>> Again, I was able to get good latency with a much lower re
Re: [PD] Raspberry Pi USB2 audio fixed
info added to the wiki: https://puredata.info/docs/raspberry-pi/FrontPage Am 03.07.2013 um 20:56 schrieb Nick Burge : > I also found that powering off a 2amp 5v usb hub gave dramatically better > results. Full duplex two channels at 44.1khz without dropouts. > > > ___ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed
I also found that powering off a 2amp 5v usb hub gave dramatically better results. Full duplex two channels at 44.1khz without dropouts. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
'off Millers site' not 'of' And also another thing with the power supply. Although 1a is supposed to be fine 2a actually works really well if you're driving any peripherals, giving plenty of overhead. J On 3 July 2013 14:31, Julian Brooks wrote: > Hey Pierre, > > I've installed Pd from the pre-compiled version of Millers site, and most > recently built it from source which took a bit more doing but Miller very > kindly walked me through the tricky bits (thread in archives "installing Pd > from source on rpi" should bring it right up). The version from the repo's > works just fine but I wanted to test out (though didn't end up making use > of) [gpio] which requires 0.44 or later. > > I got the power supply from here: > > https://www.modmypi.com/5v-2A-modmypi-raspberry-pi-power-supply?filter_name=power%20supply > > The soundcard I've been using the most (ESI UDJ - thanks Antoine:) has no > audio input so no good info on full duplex. I've been messing around with > the imic running duplex (with usb-slowdown) and had been getting reasonable > results (10-12ms) but running pretty light patches. Sorry can't be more > precise as I haven't given this card as much attention. > > Regards, > > Julian > > > > On 3 July 2013 11:06, Pierre Massat wrote: > >> Hi Julian, >> This Moebius distro looks very interesting. Can you please tell us how >> you installed Pd ? From the Raspbian repos ? >> Have you tried it with full duplex with your soundcard yet ? What latency >> are you getting (I can't get below 15 ms in Raspbian with some fft in my >> patch) ? >> >> Also is this think about the power supply true ? They mention it too on >> the Satellite CCRMA webpage. Where can I buy a power cable that outputs 5.2 >> V ? I'm currently using a samsung smartphone charger. >> >> That's a lot of questions but you made me curious (and hopeful again) ! >> >> Cheers, >> >> Pierre. >> >> >> 2013/7/3 Julian Brooks >> >>> I'm having good results from using a much leaner install - it's called >>> Mobius: >>> http://moebiuslinux.sourceforge.net/ >>> >>> Obviously depends on your usage but I'm ssh'ing into the pi and works >>> great. The minimal install seems to help with overclocking too so I reckon >>> I'm getting about another 35-40% out of the pi. >>> >>> The main project I've been working on has a pmpd patch that the regular >>> raspbian wouldn't even run, on top of that I'm driving a couple of sensors >>> (thanks Martin:), audio synthesis, got a reasonably complex quad >>> spacialisation patch (thanks Lorenzo:) and is driving a 6 channel >>> soundcard. This is without the usb-slowdown option. >>> >>> Obviously it's pushing the Pi right up to the limit but it runs* just*about >>> stably. >>> >>> What I do think made a significant difference was switching the power >>> cable to one that outputs 5.2v so by the time it gets to the pi it's a >>> solid 5v. >>> >>> Julian >>> >>> >>> On 3 July 2013 09:42, Dan Wilcox wrote: >>> >>>> Yeah I tried that out a few months ago when we started the thread. Jack >>>> adds some unnecessary overhead in my opinion and I'm surprised that a >>>> device that should be more than capable to handle this is just not setup >>>> correctly. I'm running a minimal commandline install and pd + realtime & >>>> straight alsa should work great ... it has for me in the past. >>>> >>>> His jack setup basically uses *all* the cpu of the pi, so that cuts out >>>> the other parts of my setup altogether .. visual, device input, etc. Again, >>>> I was able to get good latency with a much lower resource machine (until it >>>> just wore out), so it *should* be possible. >>>> On Jul 3, 2013, at 4:35 AM, Julian Brooks wrote: >>>> >>>> Hey Dan, >>>> >>>> Jeremy (autostatic), who setup the 'rpi and low latency, real time >>>> audio' thread has a UA-25 and seems to have full duplex working with jack >>>> (this was before the recent tweaks as well): >>>> >>>> http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222&sid=85c8b0a7cca69e35dcafaf58ff916eec#p286222 >>>> >>>> Could be worth asking him? >>>> >>>> Julian >>>> >>>> >>>
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Hey Pierre, I've installed Pd from the pre-compiled version of Millers site, and most recently built it from source which took a bit more doing but Miller very kindly walked me through the tricky bits (thread in archives "installing Pd from source on rpi" should bring it right up). The version from the repo's works just fine but I wanted to test out (though didn't end up making use of) [gpio] which requires 0.44 or later. I got the power supply from here: https://www.modmypi.com/5v-2A-modmypi-raspberry-pi-power-supply?filter_name=power%20supply The soundcard I've been using the most (ESI UDJ - thanks Antoine:) has no audio input so no good info on full duplex. I've been messing around with the imic running duplex (with usb-slowdown) and had been getting reasonable results (10-12ms) but running pretty light patches. Sorry can't be more precise as I haven't given this card as much attention. Regards, Julian On 3 July 2013 11:06, Pierre Massat wrote: > Hi Julian, > This Moebius distro looks very interesting. Can you please tell us how you > installed Pd ? From the Raspbian repos ? > Have you tried it with full duplex with your soundcard yet ? What latency > are you getting (I can't get below 15 ms in Raspbian with some fft in my > patch) ? > > Also is this think about the power supply true ? They mention it too on > the Satellite CCRMA webpage. Where can I buy a power cable that outputs 5.2 > V ? I'm currently using a samsung smartphone charger. > > That's a lot of questions but you made me curious (and hopeful again) ! > > Cheers, > > Pierre. > > > 2013/7/3 Julian Brooks > >> I'm having good results from using a much leaner install - it's called >> Mobius: >> http://moebiuslinux.sourceforge.net/ >> >> Obviously depends on your usage but I'm ssh'ing into the pi and works >> great. The minimal install seems to help with overclocking too so I reckon >> I'm getting about another 35-40% out of the pi. >> >> The main project I've been working on has a pmpd patch that the regular >> raspbian wouldn't even run, on top of that I'm driving a couple of sensors >> (thanks Martin:), audio synthesis, got a reasonably complex quad >> spacialisation patch (thanks Lorenzo:) and is driving a 6 channel >> soundcard. This is without the usb-slowdown option. >> >> Obviously it's pushing the Pi right up to the limit but it runs* just*about >> stably. >> >> What I do think made a significant difference was switching the power >> cable to one that outputs 5.2v so by the time it gets to the pi it's a >> solid 5v. >> >> Julian >> >> >> On 3 July 2013 09:42, Dan Wilcox wrote: >> >>> Yeah I tried that out a few months ago when we started the thread. Jack >>> adds some unnecessary overhead in my opinion and I'm surprised that a >>> device that should be more than capable to handle this is just not setup >>> correctly. I'm running a minimal commandline install and pd + realtime & >>> straight alsa should work great ... it has for me in the past. >>> >>> His jack setup basically uses *all* the cpu of the pi, so that cuts out >>> the other parts of my setup altogether .. visual, device input, etc. Again, >>> I was able to get good latency with a much lower resource machine (until it >>> just wore out), so it *should* be possible. >>> On Jul 3, 2013, at 4:35 AM, Julian Brooks wrote: >>> >>> Hey Dan, >>> >>> Jeremy (autostatic), who setup the 'rpi and low latency, real time >>> audio' thread has a UA-25 and seems to have full duplex working with jack >>> (this was before the recent tweaks as well): >>> >>> http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222&sid=85c8b0a7cca69e35dcafaf58ff916eec#p286222 >>> >>> Could be worth asking him? >>> >>> Julian >>> >>> >>> On 3 July 2013 02:58, Dan Wilcox wrote: >>> >>>> Yeah I tried the latest firmware with my Raspbian install and still >>>> have issues with my UA-25. Full stereo duplex = dropouts. :( >>>> >>>> On Jul 2, 2013, at 5:52 PM, pd-list-requ...@iem.at wrote: >>>> >>>> *From: *Pierre Massat >>>> *Subject: **Re: [PD] Raspberry Pi USB2 audio fixed (apparently)* >>>> *Date: *July 2, 2013 3:52:31 PM EDT >>>> *To: *Julian Brooks >>>> *Cc: *PD List >>>> >>>> >>>> Hi all, >>>> >>>> I did a fresh install
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Hi Julian, This Moebius distro looks very interesting. Can you please tell us how you installed Pd ? From the Raspbian repos ? Have you tried it with full duplex with your soundcard yet ? What latency are you getting (I can't get below 15 ms in Raspbian with some fft in my patch) ? Also is this think about the power supply true ? They mention it too on the Satellite CCRMA webpage. Where can I buy a power cable that outputs 5.2 V ? I'm currently using a samsung smartphone charger. That's a lot of questions but you made me curious (and hopeful again) ! Cheers, Pierre. 2013/7/3 Julian Brooks > I'm having good results from using a much leaner install - it's called > Mobius: > http://moebiuslinux.sourceforge.net/ > > Obviously depends on your usage but I'm ssh'ing into the pi and works > great. The minimal install seems to help with overclocking too so I reckon > I'm getting about another 35-40% out of the pi. > > The main project I've been working on has a pmpd patch that the regular > raspbian wouldn't even run, on top of that I'm driving a couple of sensors > (thanks Martin:), audio synthesis, got a reasonably complex quad > spacialisation patch (thanks Lorenzo:) and is driving a 6 channel > soundcard. This is without the usb-slowdown option. > > Obviously it's pushing the Pi right up to the limit but it runs* just*about > stably. > > What I do think made a significant difference was switching the power > cable to one that outputs 5.2v so by the time it gets to the pi it's a > solid 5v. > > Julian > > > On 3 July 2013 09:42, Dan Wilcox wrote: > >> Yeah I tried that out a few months ago when we started the thread. Jack >> adds some unnecessary overhead in my opinion and I'm surprised that a >> device that should be more than capable to handle this is just not setup >> correctly. I'm running a minimal commandline install and pd + realtime & >> straight alsa should work great ... it has for me in the past. >> >> His jack setup basically uses *all* the cpu of the pi, so that cuts out >> the other parts of my setup altogether .. visual, device input, etc. Again, >> I was able to get good latency with a much lower resource machine (until it >> just wore out), so it *should* be possible. >> On Jul 3, 2013, at 4:35 AM, Julian Brooks wrote: >> >> Hey Dan, >> >> Jeremy (autostatic), who setup the 'rpi and low latency, real time audio' >> thread has a UA-25 and seems to have full duplex working with jack (this >> was before the recent tweaks as well): >> >> http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222&sid=85c8b0a7cca69e35dcafaf58ff916eec#p286222 >> >> Could be worth asking him? >> >> Julian >> >> >> On 3 July 2013 02:58, Dan Wilcox wrote: >> >>> Yeah I tried the latest firmware with my Raspbian install and still have >>> issues with my UA-25. Full stereo duplex = dropouts. :( >>> >>> On Jul 2, 2013, at 5:52 PM, pd-list-requ...@iem.at wrote: >>> >>> *From: *Pierre Massat >>> *Subject: **Re: [PD] Raspberry Pi USB2 audio fixed (apparently)* >>> *Date: *July 2, 2013 3:52:31 PM EDT >>> *To: *Julian Brooks >>> *Cc: *PD List >>> >>> >>> Hi all, >>> >>> I did a fresh install of Raspbian using the NOOBS installer. The >>> pd-extended package from puredata.info doesn't work with my soundcard >>> (it wasn't working before). And Pd vanilla installed from the Raspbian >>> repositories doesn't work with it either (although it was working fine >>> before). My soundcard is an old EMU 0404 USB. By "doesn't work" I mean that >>> it either throws an "Audio stuck/closing audio" error, or simply freezes >>> everything (Pd, LXDE, mouse, everything) and all I can do is unplug the >>> power chord. >>> >>> So for me not only did it not fix anything, but i'm actually worse off >>> and left with the inability to use Pd at all on my Pi. >>> >>> I haven't tried Miller's compiled version of Vanilla yet (I still don't >>> know how it is different from the one available in the Raspbian repos). The >>> recent Planet CCRMA Satelite for the RPi is also an option. >>> >>> Pierre. >>> >>> >>> >>> Dan Wilcox >>> @danomatika >>> danomatika.com >>> robotcowboy.com >>> >>> >>> >>> >>> >>> >>> ___ >>> Pd-list@iem.at mailing list >>> UNSUBSCRIBE and account-management -> >>> http://lists.puredata.info/listinfo/pd-list >>> >>> >> >> >> Dan Wilcox >> @danomatika >> danomatika.com >> robotcowboy.com >> >> >> >> >> >> > > ___ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
I'm having good results from using a much leaner install - it's called Mobius: http://moebiuslinux.sourceforge.net/ Obviously depends on your usage but I'm ssh'ing into the pi and works great. The minimal install seems to help with overclocking too so I reckon I'm getting about another 35-40% out of the pi. The main project I've been working on has a pmpd patch that the regular raspbian wouldn't even run, on top of that I'm driving a couple of sensors (thanks Martin:), audio synthesis, got a reasonably complex quad spacialisation patch (thanks Lorenzo:) and is driving a 6 channel soundcard. This is without the usb-slowdown option. Obviously it's pushing the Pi right up to the limit but it runs* just*about stably. What I do think made a significant difference was switching the power cable to one that outputs 5.2v so by the time it gets to the pi it's a solid 5v. Julian On 3 July 2013 09:42, Dan Wilcox wrote: > Yeah I tried that out a few months ago when we started the thread. Jack > adds some unnecessary overhead in my opinion and I'm surprised that a > device that should be more than capable to handle this is just not setup > correctly. I'm running a minimal commandline install and pd + realtime & > straight alsa should work great ... it has for me in the past. > > His jack setup basically uses *all* the cpu of the pi, so that cuts out > the other parts of my setup altogether .. visual, device input, etc. Again, > I was able to get good latency with a much lower resource machine (until it > just wore out), so it *should* be possible. > On Jul 3, 2013, at 4:35 AM, Julian Brooks wrote: > > Hey Dan, > > Jeremy (autostatic), who setup the 'rpi and low latency, real time audio' > thread has a UA-25 and seems to have full duplex working with jack (this > was before the recent tweaks as well): > > http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222&sid=85c8b0a7cca69e35dcafaf58ff916eec#p286222 > > Could be worth asking him? > > Julian > > > On 3 July 2013 02:58, Dan Wilcox wrote: > >> Yeah I tried the latest firmware with my Raspbian install and still have >> issues with my UA-25. Full stereo duplex = dropouts. :( >> >> On Jul 2, 2013, at 5:52 PM, pd-list-requ...@iem.at wrote: >> >> *From: *Pierre Massat >> *Subject: **Re: [PD] Raspberry Pi USB2 audio fixed (apparently)* >> *Date: *July 2, 2013 3:52:31 PM EDT >> *To: *Julian Brooks >> *Cc: *PD List >> >> >> Hi all, >> >> I did a fresh install of Raspbian using the NOOBS installer. The >> pd-extended package from puredata.info doesn't work with my soundcard >> (it wasn't working before). And Pd vanilla installed from the Raspbian >> repositories doesn't work with it either (although it was working fine >> before). My soundcard is an old EMU 0404 USB. By "doesn't work" I mean that >> it either throws an "Audio stuck/closing audio" error, or simply freezes >> everything (Pd, LXDE, mouse, everything) and all I can do is unplug the >> power chord. >> >> So for me not only did it not fix anything, but i'm actually worse off >> and left with the inability to use Pd at all on my Pi. >> >> I haven't tried Miller's compiled version of Vanilla yet (I still don't >> know how it is different from the one available in the Raspbian repos). The >> recent Planet CCRMA Satelite for the RPi is also an option. >> >> Pierre. >> >> >> >> Dan Wilcox >> @danomatika >> danomatika.com >> robotcowboy.com >> >> >> >> >> >> >> ___ >> Pd-list@iem.at mailing list >> UNSUBSCRIBE and account-management -> >> http://lists.puredata.info/listinfo/pd-list >> >> > > > Dan Wilcox > @danomatika > danomatika.com > robotcowboy.com > > > > > > ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Yeah I tried that out a few months ago when we started the thread. Jack adds some unnecessary overhead in my opinion and I'm surprised that a device that should be more than capable to handle this is just not setup correctly. I'm running a minimal commandline install and pd + realtime & straight alsa should work great ... it has for me in the past. His jack setup basically uses *all* the cpu of the pi, so that cuts out the other parts of my setup altogether .. visual, device input, etc. Again, I was able to get good latency with a much lower resource machine (until it just wore out), so it *should* be possible. On Jul 3, 2013, at 4:35 AM, Julian Brooks wrote: > Hey Dan, > > Jeremy (autostatic), who setup the 'rpi and low latency, real time audio' > thread has a UA-25 and seems to have full duplex working with jack (this was > before the recent tweaks as well): > http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222&sid=85c8b0a7cca69e35dcafaf58ff916eec#p286222 > > Could be worth asking him? > > Julian > > > On 3 July 2013 02:58, Dan Wilcox wrote: > Yeah I tried the latest firmware with my Raspbian install and still have > issues with my UA-25. Full stereo duplex = dropouts. :( > > On Jul 2, 2013, at 5:52 PM, pd-list-requ...@iem.at wrote: > >> From: Pierre Massat >> Subject: Re: [PD] Raspberry Pi USB2 audio fixed (apparently) >> Date: July 2, 2013 3:52:31 PM EDT >> To: Julian Brooks >> Cc: PD List >> >> >> Hi all, >> >> I did a fresh install of Raspbian using the NOOBS installer. The pd-extended >> package from puredata.info doesn't work with my soundcard (it wasn't working >> before). And Pd vanilla installed from the Raspbian repositories doesn't >> work with it either (although it was working fine before). My soundcard is >> an old EMU 0404 USB. By "doesn't work" I mean that it either throws an >> "Audio stuck/closing audio" error, or simply freezes everything (Pd, LXDE, >> mouse, everything) and all I can do is unplug the power chord. >> >> So for me not only did it not fix anything, but i'm actually worse off and >> left with the inability to use Pd at all on my Pi. >> >> I haven't tried Miller's compiled version of Vanilla yet (I still don't know >> how it is different from the one available in the Raspbian repos). The >> recent Planet CCRMA Satelite for the RPi is also an option. >> >> Pierre. > > > Dan Wilcox > @danomatika > danomatika.com > robotcowboy.com > > > > > > > ___ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > Dan Wilcox @danomatika danomatika.com robotcowboy.com ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Hey Dan, Jeremy (autostatic), who setup the 'rpi and low latency, real time audio' thread has a UA-25 and seems to have full duplex working with jack (this was before the recent tweaks as well): http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222&sid=85c8b0a7cca69e35dcafaf58ff916eec#p286222 Could be worth asking him? Julian On 3 July 2013 02:58, Dan Wilcox wrote: > Yeah I tried the latest firmware with my Raspbian install and still have > issues with my UA-25. Full stereo duplex = dropouts. :( > > On Jul 2, 2013, at 5:52 PM, pd-list-requ...@iem.at wrote: > > *From: *Pierre Massat > *Subject: **Re: [PD] Raspberry Pi USB2 audio fixed (apparently)* > *Date: *July 2, 2013 3:52:31 PM EDT > *To: *Julian Brooks > *Cc: *PD List > > > Hi all, > > I did a fresh install of Raspbian using the NOOBS installer. The > pd-extended package from puredata.info doesn't work with my soundcard (it > wasn't working before). And Pd vanilla installed from the Raspbian > repositories doesn't work with it either (although it was working fine > before). My soundcard is an old EMU 0404 USB. By "doesn't work" I mean that > it either throws an "Audio stuck/closing audio" error, or simply freezes > everything (Pd, LXDE, mouse, everything) and all I can do is unplug the > power chord. > > So for me not only did it not fix anything, but i'm actually worse off and > left with the inability to use Pd at all on my Pi. > > I haven't tried Miller's compiled version of Vanilla yet (I still don't > know how it is different from the one available in the Raspbian repos). The > recent Planet CCRMA Satelite for the RPi is also an option. > > Pierre. > > > > Dan Wilcox > @danomatika > danomatika.com > robotcowboy.com > > > > > > > ___ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
hi all, @ Julian : no, I forgot to remove pulseaudio actually. I'll try what you suggest today or tomorrow. Cheers, Pierre. 2013/7/3 Dan Wilcox > Yeah I tried the latest firmware with my Raspbian install and still have > issues with my UA-25. Full stereo duplex = dropouts. :( > > On Jul 2, 2013, at 5:52 PM, pd-list-requ...@iem.at wrote: > > *From: *Pierre Massat > *Subject: **Re: [PD] Raspberry Pi USB2 audio fixed (apparently)* > *Date: *July 2, 2013 3:52:31 PM EDT > *To: *Julian Brooks > *Cc: *PD List > > > Hi all, > > I did a fresh install of Raspbian using the NOOBS installer. The > pd-extended package from puredata.info doesn't work with my soundcard (it > wasn't working before). And Pd vanilla installed from the Raspbian > repositories doesn't work with it either (although it was working fine > before). My soundcard is an old EMU 0404 USB. By "doesn't work" I mean that > it either throws an "Audio stuck/closing audio" error, or simply freezes > everything (Pd, LXDE, mouse, everything) and all I can do is unplug the > power chord. > > So for me not only did it not fix anything, but i'm actually worse off and > left with the inability to use Pd at all on my Pi. > > I haven't tried Miller's compiled version of Vanilla yet (I still don't > know how it is different from the one available in the Raspbian repos). The > recent Planet CCRMA Satelite for the RPi is also an option. > > Pierre. > > > > Dan Wilcox > @danomatika > danomatika.com > robotcowboy.com > > > > > > > ___ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Yeah I tried the latest firmware with my Raspbian install and still have issues with my UA-25. Full stereo duplex = dropouts. :( On Jul 2, 2013, at 5:52 PM, pd-list-requ...@iem.at wrote: > From: Pierre Massat > Subject: Re: [PD] Raspberry Pi USB2 audio fixed (apparently) > Date: July 2, 2013 3:52:31 PM EDT > To: Julian Brooks > Cc: PD List > > > Hi all, > > I did a fresh install of Raspbian using the NOOBS installer. The pd-extended > package from puredata.info doesn't work with my soundcard (it wasn't working > before). And Pd vanilla installed from the Raspbian repositories doesn't work > with it either (although it was working fine before). My soundcard is an old > EMU 0404 USB. By "doesn't work" I mean that it either throws an "Audio > stuck/closing audio" error, or simply freezes everything (Pd, LXDE, mouse, > everything) and all I can do is unplug the power chord. > > So for me not only did it not fix anything, but i'm actually worse off and > left with the inability to use Pd at all on my Pi. > > I haven't tried Miller's compiled version of Vanilla yet (I still don't know > how it is different from the one available in the Raspbian repos). The recent > Planet CCRMA Satelite for the RPi is also an option. > > Pierre. Dan Wilcox @danomatika danomatika.com robotcowboy.com ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Hi, > and all I can do is unplug the power chord. Now that's punk attitude -:^) ! -- Charlot ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Hey Pierre, Damn that's rubbish! Have you checked that pulseaudio is uninstalled? Also try: sudo rm /etc/asound.conf My understanding is that after the recent also fixes the asound.conf is redundant and can cause issues. 1st couple of options that spring to mind (also feel bad for promoting possibly duff info:( Hope you can sort it, Julian On 2 July 2013 20:52, Pierre Massat wrote: > Hi all, > > I did a fresh install of Raspbian using the NOOBS installer. The > pd-extended package from puredata.info doesn't work with my soundcard (it > wasn't working before). And Pd vanilla installed from the Raspbian > repositories doesn't work with it either (although it was working fine > before). My soundcard is an old EMU 0404 USB. By "doesn't work" I mean that > it either throws an "Audio stuck/closing audio" error, or simply freezes > everything (Pd, LXDE, mouse, everything) and all I can do is unplug the > power chord. > > So for me not only did it not fix anything, but i'm actually worse off and > left with the inability to use Pd at all on my Pi. > > I haven't tried Miller's compiled version of Vanilla yet (I still don't > know how it is different from the one available in the Raspbian repos). The > recent Planet CCRMA Satelite for the RPi is also an option. > > Pierre. > > > 2013/6/5 Julian Brooks > >> Hey all, >> >> So, umm, yeah. Is everyone on this already? >> >> Just got a message saying that an 'rpi-update' should fix the usb2 >> problems for soundcards. >> >> Not checked 'cos I spent bloody ages tracking down soundcards that did >> work. >> >> Good to know though. >> >> >> http://www.raspberrypi.org/phpBB3/viewtopic.php?p=364163&sid=04807df00bff9fa076fd62c358dfd9fc#p364163 >> >> http://www.raspberrypi.org/phpBB3/viewtopic.php?p=362690#p362690 >> >> http://www.raspyfi.com/raspberry-pi-usb-audio-fix/ >> (anyone checked out this distro btw?) >> >> Good to hear there seems to be lots of audio tweaks and exploration going >> on on the Pi (still:) >> >> Best wishes, >> >> Julian >> >> ___ >> Pd-list@iem.at mailing list >> UNSUBSCRIBE and account-management -> >> http://lists.puredata.info/listinfo/pd-list >> >> > ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] Raspberry Pi USB2 audio fixed (apparently)
Hi all, I did a fresh install of Raspbian using the NOOBS installer. The pd-extended package from puredata.info doesn't work with my soundcard (it wasn't working before). And Pd vanilla installed from the Raspbian repositories doesn't work with it either (although it was working fine before). My soundcard is an old EMU 0404 USB. By "doesn't work" I mean that it either throws an "Audio stuck/closing audio" error, or simply freezes everything (Pd, LXDE, mouse, everything) and all I can do is unplug the power chord. So for me not only did it not fix anything, but i'm actually worse off and left with the inability to use Pd at all on my Pi. I haven't tried Miller's compiled version of Vanilla yet (I still don't know how it is different from the one available in the Raspbian repos). The recent Planet CCRMA Satelite for the RPi is also an option. Pierre. 2013/6/5 Julian Brooks > Hey all, > > So, umm, yeah. Is everyone on this already? > > Just got a message saying that an 'rpi-update' should fix the usb2 > problems for soundcards. > > Not checked 'cos I spent bloody ages tracking down soundcards that did > work. > > Good to know though. > > > http://www.raspberrypi.org/phpBB3/viewtopic.php?p=364163&sid=04807df00bff9fa076fd62c358dfd9fc#p364163 > > http://www.raspberrypi.org/phpBB3/viewtopic.php?p=362690#p362690 > > http://www.raspyfi.com/raspberry-pi-usb-audio-fix/ > (anyone checked out this distro btw?) > > Good to hear there seems to be lots of audio tweaks and exploration going > on on the Pi (still:) > > Best wishes, > > Julian > > ___ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
[PD] Raspberry Pi USB2 audio fixed (apparently)
Hey all, So, umm, yeah. Is everyone on this already? Just got a message saying that an 'rpi-update' should fix the usb2 problems for soundcards. Not checked 'cos I spent bloody ages tracking down soundcards that did work. Good to know though. http://www.raspberrypi.org/phpBB3/viewtopic.php?p=364163&sid=04807df00bff9fa076fd62c358dfd9fc#p364163 http://www.raspberrypi.org/phpBB3/viewtopic.php?p=362690#p362690 http://www.raspyfi.com/raspberry-pi-usb-audio-fix/ (anyone checked out this distro btw?) Good to hear there seems to be lots of audio tweaks and exploration going on on the Pi (still:) Best wishes, Julian ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
