Re: [HACKERS] Specifying the log file name of pgbench -l option
On Tue, Nov 8, 2016 at 4:04 AM, Fabien COELHO wrote: > > [ ... v4 ] > >> I checked. It works as expected. I have no more comments. >> If its okay with Fabien, we can mark it ready for committer. > > Patch applies, compiles (including the documentation), make check ok and > features works for me. Code could be a little simpler, but it is okay. I've > switched the status to "ready for committers". Committed with some wordsmithing and cosmetic tweaks. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Specifying the log file name of pgbench -l option
[ ... v4 ] I checked. It works as expected. I have no more comments. If its okay with Fabien, we can mark it ready for committer. Patch applies, compiles (including the documentation), make check ok and features works for me. Code could be a little simpler, but it is okay. I've switched the status to "ready for committers". -- Fabien. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Specifying the log file name of pgbench -l option
Hello, On Mon, Nov 7, 2016 at 8:42 PM, Masahiko Sawada wrote: > On Mon, Nov 7, 2016 at 10:52 PM, Beena Emerson > wrote: > > Hello Sawada-san, > > > > On Mon, Nov 7, 2016 at 4:47 PM, Masahiko Sawada > > wrote: > >> > >> On Wed, Nov 2, 2016 at 3:57 PM, Beena Emerson > >> wrote: > >> > Hello, > >> > > >> > On Wed, Nov 2, 2016 at 4:16 AM, Fabien COELHO > >> > wrote: > >> >> > >> >> > >> >> Hello Masahiko, > >> >> > >> So I would suggest to: > >> - fix the compilation issue > >> - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix > >> - add --log-prefix=... (long option only) for changing this prefix > >> >>> > >> >>> > >> >>> I agree. It's better to add the separated option to specify the > prefix > >> >>> of log file instead of changing the existing behaviour. Attached > >> >>> latest patch incorporated review comments. > >> >>> Please review it. > >> >> > >> >> > >> >> Patch applies, compiles and works for me. > >> > > >> > > >> > It works for me as well. > >> > > >> >> > >> >> > >> >> This new option is for benchmarking, so "benchmarking_option_set" > >> >> should > >> >> be set to true. > >> >> > >> >> To simplify the code, I would suggest to initialize explicitely > >> >> "logfile_prefix" to the default value which is then overriden when > the > >> >> option is set, which allows to get rid of the "prefix" variable > later. > >> >> > >> >> There is no reason to change the documentation by breaking a line at > >> >> another place if the text is not changed (where ... with 1). > >> >> > >> >> I would suggest to simplify a little bit the documentation: > >> >> "prefix of log file ..." -> > >> >> "default log file prefix that can be changed with ..." > >> >> > >> >> Otherwise the explanations seem clear enough to me. If a native > English > >> >> speaker could check them though, it would be nice. > >> > > >> > > >> > For the explanation of the option --log-prefix, I feel it would be > >> > better to > >> > say "Custom prefix for transaction log file. Default is pgbench_log" > >> > > >> > > >> > - pgbench_log.nnn, where > >> > + > >> > > >> > pgbench_log.< > replaceable>nnn, > >> > + where pgbench_log is the prefix of log > >> > file > >> > that can > >> > + be changed by specifying --log-prefix, and where > >> > > >> > It could just say "the default prefix pgbench_log can be changed with > >> > option > >> > --log-prefix, and " we need not use where again. > >> > > >> > Also the error message is made similar to that of aggregate-interval > but > >> > I > >> > think the one in sampling-rate is better: > >> > > >> > $ pgbench --log-prefix=chk -t 20 > >> > log file prefix (--log-prefix) is allowed only when actually logging > >> > transactions > >> > > >> > pgbench --sampling-rate=1 -t 20 > >> > log sampling (--sampling-rate) is allowed only when logging > transactions > >> > (-l) > >> > > >> > >> Thank you for reviewing this patch! > >> > >> Attached latest patch incorporated comments. > >> Please review it. > >> > > > > Thank you for updating the patch. > > > > I note that the current changes, break the behaviour when we do not use > -l > > option. > > > > Since the log_prefix variable is set to default value, the check " if > > (!use_log && logfile_prefix)" always returns true. This throws error > even > > when we have not used the -l and --log-prefix option as shown below. > > > > $ pgbench -T 50 > > log file prefix (--log-prefix) is allowed only when logging transactions > > (-l) > > > > Thanks. > Attached latest patch. > Please review it. > Thank you for the update. I checked. It works as expected. I have no more comments. If its okay with Fabien, we can mark it ready for committer. Thanks, Beena Emerson Have a Great Day!
Re: [HACKERS] Specifying the log file name of pgbench -l option
On Mon, Nov 7, 2016 at 10:52 PM, Beena Emerson wrote: > Hello Sawada-san, > > On Mon, Nov 7, 2016 at 4:47 PM, Masahiko Sawada > wrote: >> >> On Wed, Nov 2, 2016 at 3:57 PM, Beena Emerson >> wrote: >> > Hello, >> > >> > On Wed, Nov 2, 2016 at 4:16 AM, Fabien COELHO >> > wrote: >> >> >> >> >> >> Hello Masahiko, >> >> >> So I would suggest to: >> - fix the compilation issue >> - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix >> - add --log-prefix=... (long option only) for changing this prefix >> >>> >> >>> >> >>> I agree. It's better to add the separated option to specify the prefix >> >>> of log file instead of changing the existing behaviour. Attached >> >>> latest patch incorporated review comments. >> >>> Please review it. >> >> >> >> >> >> Patch applies, compiles and works for me. >> > >> > >> > It works for me as well. >> > >> >> >> >> >> >> This new option is for benchmarking, so "benchmarking_option_set" >> >> should >> >> be set to true. >> >> >> >> To simplify the code, I would suggest to initialize explicitely >> >> "logfile_prefix" to the default value which is then overriden when the >> >> option is set, which allows to get rid of the "prefix" variable later. >> >> >> >> There is no reason to change the documentation by breaking a line at >> >> another place if the text is not changed (where ... with 1). >> >> >> >> I would suggest to simplify a little bit the documentation: >> >> "prefix of log file ..." -> >> >> "default log file prefix that can be changed with ..." >> >> >> >> Otherwise the explanations seem clear enough to me. If a native English >> >> speaker could check them though, it would be nice. >> > >> > >> > For the explanation of the option --log-prefix, I feel it would be >> > better to >> > say "Custom prefix for transaction log file. Default is pgbench_log" >> > >> > >> > - pgbench_log.nnn, where >> > + >> > >> > pgbench_log.nnn, >> > + where pgbench_log is the prefix of log >> > file >> > that can >> > + be changed by specifying --log-prefix, and where >> > >> > It could just say "the default prefix pgbench_log can be changed with >> > option >> > --log-prefix, and " we need not use where again. >> > >> > Also the error message is made similar to that of aggregate-interval but >> > I >> > think the one in sampling-rate is better: >> > >> > $ pgbench --log-prefix=chk -t 20 >> > log file prefix (--log-prefix) is allowed only when actually logging >> > transactions >> > >> > pgbench --sampling-rate=1 -t 20 >> > log sampling (--sampling-rate) is allowed only when logging transactions >> > (-l) >> > >> >> Thank you for reviewing this patch! >> >> Attached latest patch incorporated comments. >> Please review it. >> > > Thank you for updating the patch. > > I note that the current changes, break the behaviour when we do not use -l > option. > > Since the log_prefix variable is set to default value, the check " if > (!use_log && logfile_prefix)" always returns true. This throws error even > when we have not used the -l and --log-prefix option as shown below. > > $ pgbench -T 50 > log file prefix (--log-prefix) is allowed only when logging transactions > (-l) > Thanks. Attached latest patch. Please review it. Regards, -- Masahiko Sawada NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center diff --git a/doc/src/sgml/ref/pgbench.sgml b/doc/src/sgml/ref/pgbench.sgml index 285608d..a6fe183 100644 --- a/doc/src/sgml/ref/pgbench.sgml +++ b/doc/src/sgml/ref/pgbench.sgml @@ -614,6 +614,15 @@ pgbench options dbname + + --log-prefix=prefix + + +Custom prefix of transaction log file. Default is pgbench_log. + + + + @@ -1121,13 +1130,14 @@ END; With the -l option but without the --aggregate-interval, pgbench writes the time taken by each transaction to a log file. The log file will be named - pgbench_log.nnn, where - nnn is the PID of the pgbench process. - If the -j option is 2 or higher, creating multiple worker - threads, each will have its own log file. The first worker will use the - same name for its log file as in the standard single worker case. + pgbench_log.nnn, + where the default prefix pgbench_log can be changed with option + --log-prefix, and nnn is the PID of the + pgbench process. If the -j option is 2 or higher, + creating multiple worker threads, each will have its own log file. The first worker will + use the same name for its log file as in the standard single worker case. The additional log files for the other workers will be named - pgbench_log.nnn.mmm, + pgbench_log.nnn.mmm, where mmm is a sequential number for each worker starting with 1. diff --git a/src/bin/pgbench/pgbench.c b/src/bin/pgbench/pgbench.c index d44cfda..318b132 100644 --- a/src/bin/pgbench/pgbench.c +++ b/src/bin/pgbench/pgbench.c @@ -180,6 +180,7 @@ char *pghost = ""; char *pgport = ""; char
Re: [HACKERS] Specifying the log file name of pgbench -l option
Hello Sawada-san, On Mon, Nov 7, 2016 at 4:47 PM, Masahiko Sawada wrote: > On Wed, Nov 2, 2016 at 3:57 PM, Beena Emerson > wrote: > > Hello, > > > > On Wed, Nov 2, 2016 at 4:16 AM, Fabien COELHO > wrote: > >> > >> > >> Hello Masahiko, > >> > So I would suggest to: > - fix the compilation issue > - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix > - add --log-prefix=... (long option only) for changing this prefix > >>> > >>> > >>> I agree. It's better to add the separated option to specify the prefix > >>> of log file instead of changing the existing behaviour. Attached > >>> latest patch incorporated review comments. > >>> Please review it. > >> > >> > >> Patch applies, compiles and works for me. > > > > > > It works for me as well. > > > >> > >> > >> This new option is for benchmarking, so "benchmarking_option_set" should > >> be set to true. > >> > >> To simplify the code, I would suggest to initialize explicitely > >> "logfile_prefix" to the default value which is then overriden when the > >> option is set, which allows to get rid of the "prefix" variable later. > >> > >> There is no reason to change the documentation by breaking a line at > >> another place if the text is not changed (where ... with 1). > >> > >> I would suggest to simplify a little bit the documentation: > >> "prefix of log file ..." -> > >> "default log file prefix that can be changed with ..." > >> > >> Otherwise the explanations seem clear enough to me. If a native English > >> speaker could check them though, it would be nice. > > > > > > For the explanation of the option --log-prefix, I feel it would be > better to > > say "Custom prefix for transaction log file. Default is pgbench_log" > > > > > > - pgbench_log.nnn, where > > + > > pgbench_log.< > replaceable>nnn, > > + where pgbench_log is the prefix of log > file > > that can > > + be changed by specifying --log-prefix, and where > > > > It could just say "the default prefix pgbench_log can be changed with > option > > --log-prefix, and " we need not use where again. > > > > Also the error message is made similar to that of aggregate-interval but > I > > think the one in sampling-rate is better: > > > > $ pgbench --log-prefix=chk -t 20 > > log file prefix (--log-prefix) is allowed only when actually logging > > transactions > > > > pgbench --sampling-rate=1 -t 20 > > log sampling (--sampling-rate) is allowed only when logging transactions > > (-l) > > > > Thank you for reviewing this patch! > > Attached latest patch incorporated comments. > Please review it. > > Thank you for updating the patch. I note that the current changes, break the behaviour when we do not use -l option. Since the log_prefix variable is set to default value, the check " if (!use_log && logfile_prefix)" always returns true. This throws error even when we have not used the -l and --log-prefix option as shown below. $ pgbench -T 50 log file prefix (--log-prefix) is allowed only when logging transactions (-l) Kindly fix this. Thank you, -- Beena Emerson Have a Great Day!
Re: [HACKERS] Specifying the log file name of pgbench -l option
On Wed, Nov 2, 2016 at 3:57 PM, Beena Emerson wrote: > Hello, > > On Wed, Nov 2, 2016 at 4:16 AM, Fabien COELHO wrote: >> >> >> Hello Masahiko, >> So I would suggest to: - fix the compilation issue - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix - add --log-prefix=... (long option only) for changing this prefix >>> >>> >>> I agree. It's better to add the separated option to specify the prefix >>> of log file instead of changing the existing behaviour. Attached >>> latest patch incorporated review comments. >>> Please review it. >> >> >> Patch applies, compiles and works for me. > > > It works for me as well. > >> >> >> This new option is for benchmarking, so "benchmarking_option_set" should >> be set to true. >> >> To simplify the code, I would suggest to initialize explicitely >> "logfile_prefix" to the default value which is then overriden when the >> option is set, which allows to get rid of the "prefix" variable later. >> >> There is no reason to change the documentation by breaking a line at >> another place if the text is not changed (where ... with 1). >> >> I would suggest to simplify a little bit the documentation: >> "prefix of log file ..." -> >> "default log file prefix that can be changed with ..." >> >> Otherwise the explanations seem clear enough to me. If a native English >> speaker could check them though, it would be nice. > > > For the explanation of the option --log-prefix, I feel it would be better to > say "Custom prefix for transaction log file. Default is pgbench_log" > > > - pgbench_log.nnn, where > + > pgbench_log.nnn, > + where pgbench_log is the prefix of log file > that can > + be changed by specifying --log-prefix, and where > > It could just say "the default prefix pgbench_log can be changed with option > --log-prefix, and " we need not use where again. > > Also the error message is made similar to that of aggregate-interval but I > think the one in sampling-rate is better: > > $ pgbench --log-prefix=chk -t 20 > log file prefix (--log-prefix) is allowed only when actually logging > transactions > > pgbench --sampling-rate=1 -t 20 > log sampling (--sampling-rate) is allowed only when logging transactions > (-l) > Thank you for reviewing this patch! Attached latest patch incorporated comments. Please review it. Regards, -- Masahiko Sawada NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center diff --git a/doc/src/sgml/ref/pgbench.sgml b/doc/src/sgml/ref/pgbench.sgml index 285608d..a6fe183 100644 --- a/doc/src/sgml/ref/pgbench.sgml +++ b/doc/src/sgml/ref/pgbench.sgml @@ -614,6 +614,15 @@ pgbench options dbname + + --log-prefix=prefix + + +Custom prefix of transaction log file. Default is pgbench_log. + + + + @@ -1121,13 +1130,14 @@ END; With the -l option but without the --aggregate-interval, pgbench writes the time taken by each transaction to a log file. The log file will be named - pgbench_log.nnn, where - nnn is the PID of the pgbench process. - If the -j option is 2 or higher, creating multiple worker - threads, each will have its own log file. The first worker will use the - same name for its log file as in the standard single worker case. + pgbench_log.nnn, + where the default prefix pgbench_log can be changed with option + --log-prefix, and nnn is the PID of the + pgbench process. If the -j option is 2 or higher, + creating multiple worker threads, each will have its own log file. The first worker will + use the same name for its log file as in the standard single worker case. The additional log files for the other workers will be named - pgbench_log.nnn.mmm, + pgbench_log.nnn.mmm, where mmm is a sequential number for each worker starting with 1. diff --git a/src/bin/pgbench/pgbench.c b/src/bin/pgbench/pgbench.c index d44cfda..c7c1ac6 100644 --- a/src/bin/pgbench/pgbench.c +++ b/src/bin/pgbench/pgbench.c @@ -180,6 +180,7 @@ char *pghost = ""; char *pgport = ""; char *login = NULL; char *dbName; +char *logfile_prefix = "pgbench_log"; const char *progname; #define WSEP '@'/* weight separator */ @@ -511,6 +512,7 @@ usage(void) " --aggregate-interval=NUM aggregate data over NUM seconds\n" " --progress-timestamp use Unix epoch timestamps for progress\n" " --sampling-rate=NUM fraction of transactions to log (e.g., 0.01 for 1%%)\n" + " --log-prefix=PREFIX prefix of transaction time log file (default: pgbench_log)\n" "\nCommon options:\n" " -d, --debug print debugging output\n" " -h, --host=HOSTNAME database server host or socket directory\n" @@ -3643,6 +3645,7 @@ main(int argc, char **argv) {"sampling-rate", required_argument, NULL, 4}, {"aggregate-interval", required_argument, NULL, 5}, {"progress-timestamp", no_argument, NULL, 6}, + {"log-prefix", required_argume
Re: [HACKERS] Specifying the log file name of pgbench -l option
Hello, On Wed, Nov 2, 2016 at 4:16 AM, Fabien COELHO wrote: > > Hello Masahiko, > > So I would suggest to: >>> - fix the compilation issue >>> - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix >>> - add --log-prefix=... (long option only) for changing this prefix >>> >> >> I agree. It's better to add the separated option to specify the prefix >> of log file instead of changing the existing behaviour. Attached >> latest patch incorporated review comments. >> Please review it. >> > > Patch applies, compiles and works for me. > It works for me as well. > > This new option is for benchmarking, so "benchmarking_option_set" should > be set to true. > > To simplify the code, I would suggest to initialize explicitely > "logfile_prefix" to the default value which is then overriden when the > option is set, which allows to get rid of the "prefix" variable later. > > There is no reason to change the documentation by breaking a line at > another place if the text is not changed (where ... with 1). > > I would suggest to simplify a little bit the documentation: > "prefix of log file ..." -> > "default log file prefix that can be changed with ..." > > Otherwise the explanations seem clear enough to me. If a native English > speaker could check them though, it would be nice. For the explanation of the option --log-prefix, I feel it would be better to say "Custom prefix for transaction log file. Default is pgbench_log" - pgbench_log.nnn, where + pgbench_log.nnn, + where pgbench_log is the prefix of log file that can + be changed by specifying --log-prefix, and where It could just say "the default prefix pgbench_log can be changed with option --log-prefix, and " we need not use where again. Also the error message is made similar to that of aggregate-interval but I think the one in sampling-rate is better: $ pgbench --log-prefix=chk -t 20 log file prefix (--log-prefix) is allowed only when actually logging transactions pgbench --sampling-rate=1 -t 20 log sampling (--sampling-rate) is allowed only when logging transactions (-l) Thanks, Beena Emerson Have a Great Day!
Re: [HACKERS] Specifying the log file name of pgbench -l option
Hello Masahiko, So I would suggest to: - fix the compilation issue - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix - add --log-prefix=... (long option only) for changing this prefix I agree. It's better to add the separated option to specify the prefix of log file instead of changing the existing behaviour. Attached latest patch incorporated review comments. Please review it. Patch applies, compiles and works for me. This new option is for benchmarking, so "benchmarking_option_set" should be set to true. To simplify the code, I would suggest to initialize explicitely "logfile_prefix" to the default value which is then overriden when the option is set, which allows to get rid of the "prefix" variable later. There is no reason to change the documentation by breaking a line at another place if the text is not changed (where ... with 1). I would suggest to simplify a little bit the documentation: "prefix of log file ..." -> "default log file prefix that can be changed with ..." Otherwise the explanations seem clear enough to me. If a native English speaker could check them though, it would be nice. -- Fabien. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Specifying the log file name of pgbench -l option
On Wed, Nov 2, 2016 at 1:41 AM, Fabien COELHO wrote: > >> The log file generated by pgbench -l option is fixed file name >> 'pgbench_log..'. And it's a little complicated for the >> script that runs pgbench repeatedly to identify the log file name. >> Attached patch make it possible to specify the log file name. I think >> it's useful for the use who want to run pgbench repeatedly in script >> and collects and analyze the result. >> >> The one thing I concern is that this patch changes -l option so that >> it requires argument. >> But changing its behavior would be good rather than adding new option. >> >> Please give me feedback. > > > Patch applies but does not compile, because "logfilename" is not declared. > I guess "logfile" was meant instead. > > I understand and agree that in some case having only a predefined file > prefix in the current directory as the only option can be a hindrance for > scripts which use pgbench and rely on the log. > > I'm not at ease either with changing the behavior of such an option, as some > people may be happy with it and some script may be using it. I would suggest > not to do so. > > Moreover, what is provided is not a file name, but a prefix used to build > file names. > > So I would suggest to: > - fix the compilation issue > - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix > - add --log-prefix=... (long option only) for changing this prefix > Thank you for reviewing this patch! I agree. It's better to add the separated option to specify the prefix of log file instead of changing the existing behaviour. Attached latest patch incorporated review comments. Please review it. Regards, -- Masahiko Sawada NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center diff --git a/doc/src/sgml/ref/pgbench.sgml b/doc/src/sgml/ref/pgbench.sgml index 285608d..100cdb0 100644 --- a/doc/src/sgml/ref/pgbench.sgml +++ b/doc/src/sgml/ref/pgbench.sgml @@ -614,6 +614,16 @@ pgbench options dbname + + --log-prefix=prefix + + +Prefix of transaction log file. If this option is not given, +pgbench_log is used. + + + + @@ -1121,15 +1131,17 @@ END; With the -l option but without the --aggregate-interval, pgbench writes the time taken by each transaction to a log file. The log file will be named - pgbench_log.nnn, where + pgbench_log.nnn, + where pgbench_log is the prefix of log file that can + be changed by specifying --log-prefix, and where nnn is the PID of the pgbench process. If the -j option is 2 or higher, creating multiple worker threads, each will have its own log file. The first worker will use the same name for its log file as in the standard single worker case. The additional log files for the other workers will be named - pgbench_log.nnn.mmm, - where mmm is a sequential number for each worker starting - with 1. + pgbench_log.nnn.mmm, + where mmm is a sequential number + for each worker starting with 1. diff --git a/src/bin/pgbench/pgbench.c b/src/bin/pgbench/pgbench.c index d44cfda..32ffdff 100644 --- a/src/bin/pgbench/pgbench.c +++ b/src/bin/pgbench/pgbench.c @@ -180,6 +180,7 @@ char *pghost = ""; char *pgport = ""; char *login = NULL; char *dbName; +char *logfile_prefix; const char *progname; #define WSEP '@'/* weight separator */ @@ -511,6 +512,7 @@ usage(void) " --aggregate-interval=NUM aggregate data over NUM seconds\n" " --progress-timestamp use Unix epoch timestamps for progress\n" " --sampling-rate=NUM fraction of transactions to log (e.g., 0.01 for 1%%)\n" + " --log-prefix=PREFIX prefix of transaction time log file (default: pgbench_log)\n" "\nCommon options:\n" " -d, --debug print debugging output\n" " -h, --host=HOSTNAME database server host or socket directory\n" @@ -3643,6 +3645,7 @@ main(int argc, char **argv) {"sampling-rate", required_argument, NULL, 4}, {"aggregate-interval", required_argument, NULL, 5}, {"progress-timestamp", no_argument, NULL, 6}, + {"log-prefix", required_argument, NULL, 7}, {NULL, 0, NULL, 0} }; @@ -3990,6 +3993,9 @@ main(int argc, char **argv) progress_timestamp = true; benchmarking_option_set = true; break; + case 7: +logfile_prefix = pg_strdup(optarg); +break; default: fprintf(stderr, _("Try \"%s --help\" for more information.\n"), progname); exit(1); @@ -4087,6 +4093,12 @@ main(int argc, char **argv) exit(1); } + if (!use_log && logfile_prefix) + { + fprintf(stderr, "log file prefix (--log-prefix) is allowed only when actually logging transactions\n"); + exit(1); + } + if (duration > 0 && agg_interval > duration) { fprintf(stderr, "number of seconds for aggregation (%d) must not be higher than test duration (%d)\n", agg_interval, duration); @@ -4388,11 +4400,13 @@ threadRun(void *arg) if
Re: [HACKERS] Specifying the log file name of pgbench -l option
The log file generated by pgbench -l option is fixed file name 'pgbench_log..'. And it's a little complicated for the script that runs pgbench repeatedly to identify the log file name. Attached patch make it possible to specify the log file name. I think it's useful for the use who want to run pgbench repeatedly in script and collects and analyze the result. The one thing I concern is that this patch changes -l option so that it requires argument. But changing its behavior would be good rather than adding new option. Please give me feedback. Patch applies but does not compile, because "logfilename" is not declared. I guess "logfile" was meant instead. I understand and agree that in some case having only a predefined file prefix in the current directory as the only option can be a hindrance for scripts which use pgbench and rely on the log. I'm not at ease either with changing the behavior of such an option, as some people may be happy with it and some script may be using it. I would suggest not to do so. Moreover, what is provided is not a file name, but a prefix used to build file names. So I would suggest to: - fix the compilation issue - leave -l/--log as it is, i.e. use "pgbench_log" as a prefix - add --log-prefix=... (long option only) for changing this prefix -- Fabien. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
[HACKERS] Specifying the log file name of pgbench -l option
Hi all, The log file generated by pgbench -l option is fixed file name 'pgbench_log..'. And it's a little complicated for the script that runs pgbench repeatedly to identify the log file name. Attached patch make it possible to specify the log file name. I think it's useful for the use who want to run pgbench repeatedly in script and collects and analyze the result. The one thing I concern is that this patch changes -l option so that it requires argument. But changing its behavior would be good rather than adding new option. Please give me feedback. Regards, -- Masahiko Sawada NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center pgbench_log_file_name.patch Description: binary/octet-stream -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers