Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-27 11:53, Sokolov Yura wrote: On 2017-07-26 20:28, Sokolov Yura wrote: On 2017-07-26 19:46, Claudio Freire wrote: On Wed, Jul 26, 2017 at 1:39 PM, Sokolov Yura wrote: On 2017-07-24 12:41, Sokolov Yura wrote: test_master_1/pretty.log ... time activity tps latency stddev min max 11130 av+ch 198198ms374ms 7ms 1956ms 11160 av+ch 248163ms401ms 7ms 2601ms 11190 av+ch 321125ms363ms 7ms 2722ms 11220 av+ch 1155 35ms123ms 7ms 2668ms 11250 av+ch 1390 29ms 79ms 7ms 1422ms vs test_master_ring16_1/pretty.log time activity tps latency stddev min max 11130 av+ch 26 1575ms635ms101ms 2536ms 11160 av+ch 25 1552ms648ms 58ms 2376ms 11190 av+ch 32 1275ms726ms 16ms 2493ms 11220 av+ch 23 1584ms674ms 48ms 2454ms 11250 av+ch 35 1235ms777ms 22ms 3627ms That's a very huge change in latency for the worse Are you sure that's the ring buffer's doing and not some methodology snafu? Well, I tuned postgresql.conf so that there is no such catastrophic slows down on master branch. (with default settings such slowdown happens quite frequently). bgwriter_lru_maxpages = 10 (instead of default 200) were one of such tuning. Probably there were some magic "border" that triggers this behavior. Tuning postgresql.conf shifted master branch on "good side" of this border, and faster autovacuum crossed it to "bad side" again. Probably, backend_flush_after = 2MB (instead of default 0) is also part of this border. I didn't try to bench without this option yet. Any way, given checkpoint and autovacuum interference could be such noticeable, checkpoint clearly should affect autovacuum cost mechanism, imho. With regards, I'll run two times with default postgresql.conf (except shared_buffers and maintence_work_mem) to find out behavior on default setting. Then I'll try to investigate checkpoint co-operation with autovacuum to fix behavior with "tuned" postgresql.conf. I've accidentally lost results of this run, so I will rerun it. This I remembered: - even with default settings, autovacuum runs 3 times faster: 9000s on master, 3000s with increased ring buffer. So xlog-fsync really slows down autovacuum. - but concurrent transactions slows down (not so extremely as in previous test, but still significantly). I could not draw pretty table now, cause I lost results. I'll do it after re-run completes. Could someone suggest, how to cooperate checkpoint with autovacuum, to slow down autovacuum a bit during checkpoint? With regards, -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 27, 2017 at 2:10 PM, Alvaro Herrera wrote: > Claudio Freire wrote: >> On Thu, Jul 27, 2017 at 1:46 PM, Alvaro Herrera >> wrote: >> > Claudio Freire wrote: >> > >> >> > The vacuuming the very large table with no index could also take a >> >> > long time, and it scans and vacuums blocks one by one. So I imagined >> >> > that we can vacuum the FSM once vacuumed a certain amount of blocks. >> >> > And that can avoid bloating table during the long-time vacuum. >> >> >> >> Could do that. I'll see about doing something of the sort and >> >> submitting it as a separate patch. >> > >> > Vacuuming of the FSM is in no way strictly tied to vacuuming the heap >> > (it's not really "vacuuming", it's just about updating the upper layers >> > to match the data in the leaves). I think we could use the new autovac >> > "workitem" infrastructure and tack an item there once in a while for FSM >> > vacuuming ... >> >> Well, it *is* tied in the sense that vacuum is the one massively >> adding free space. > > Yes, but if vacuum dies after releasing lots of space but before > vacuuming FSM, then it's not tied anymore and you could just as well run > it anytime. I see your point. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
Claudio Freire wrote: > On Thu, Jul 27, 2017 at 1:46 PM, Alvaro Herrera > wrote: > > Claudio Freire wrote: > > > >> > The vacuuming the very large table with no index could also take a > >> > long time, and it scans and vacuums blocks one by one. So I imagined > >> > that we can vacuum the FSM once vacuumed a certain amount of blocks. > >> > And that can avoid bloating table during the long-time vacuum. > >> > >> Could do that. I'll see about doing something of the sort and > >> submitting it as a separate patch. > > > > Vacuuming of the FSM is in no way strictly tied to vacuuming the heap > > (it's not really "vacuuming", it's just about updating the upper layers > > to match the data in the leaves). I think we could use the new autovac > > "workitem" infrastructure and tack an item there once in a while for FSM > > vacuuming ... > > Well, it *is* tied in the sense that vacuum is the one massively > adding free space. Yes, but if vacuum dies after releasing lots of space but before vacuuming FSM, then it's not tied anymore and you could just as well run it anytime. -- Álvaro Herrerahttps://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Remote DBA, Training & Services -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 27, 2017 at 1:46 PM, Alvaro Herrera wrote: > Claudio Freire wrote: > >> > The vacuuming the very large table with no index could also take a >> > long time, and it scans and vacuums blocks one by one. So I imagined >> > that we can vacuum the FSM once vacuumed a certain amount of blocks. >> > And that can avoid bloating table during the long-time vacuum. >> >> Could do that. I'll see about doing something of the sort and >> submitting it as a separate patch. > > Vacuuming of the FSM is in no way strictly tied to vacuuming the heap > (it's not really "vacuuming", it's just about updating the upper layers > to match the data in the leaves). I think we could use the new autovac > "workitem" infrastructure and tack an item there once in a while for FSM > vacuuming ... Well, it *is* tied in the sense that vacuum is the one massively adding free space. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
Claudio Freire wrote: > > The vacuuming the very large table with no index could also take a > > long time, and it scans and vacuums blocks one by one. So I imagined > > that we can vacuum the FSM once vacuumed a certain amount of blocks. > > And that can avoid bloating table during the long-time vacuum. > > Could do that. I'll see about doing something of the sort and > submitting it as a separate patch. Vacuuming of the FSM is in no way strictly tied to vacuuming the heap (it's not really "vacuuming", it's just about updating the upper layers to match the data in the leaves). I think we could use the new autovac "workitem" infrastructure and tack an item there once in a while for FSM vacuuming ... -- Álvaro Herrerahttps://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Remote DBA, Training & Services -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 27, 2017 at 6:16 AM, Masahiko Sawada wrote: > On Thu, Jul 27, 2017 at 5:48 PM, Sokolov Yura > wrote: >> On 2017-07-27 11:30, Masahiko Sawada wrote: >>> >>> On Tue, Jul 25, 2017 at 2:27 AM, Claudio Freire >>> wrote: On Mon, Jul 24, 2017 at 2:20 PM, Claudio Freire wrote: > > On Mon, Jul 24, 2017 at 2:10 PM, Sokolov Yura > wrote: >> >> On 2017-07-24 19:11, Claudio Freire wrote: >>> >>> I was mostly thinking about something like the attached patch. >>> >>> Simple, unintrusive, and shouldn't cause any noticeable slowdown. >> >> >> >> Your change is small, clear, and currently useful for huge tables under >> high update load (until "allowing vacuum to use more than 1GB memory" >> is merged). > > > In high-bloat conditions, it doesn't take long to accumulate 1GB of > dead tuples (which is about 178M tuples, btw). > > The index scan takes way longer than the heap scan in that case. > >> But it still delays updating fsm until whole first batch of dead tuples >> cleared (ie all indices scanned, and all heap pages cleared), and on >> such >> huge table it will be hours. > > > So, true, it will get delayed considerably. But as you realized, > there's not much point in trying to vacuum the FSM sooner, since it > won't be accurate shortly afterwards anyway. Dead line pointers do use > up a fair bit of space, especially on narrow tables. > > In a particular table I have that exhibits this problem, most of the > time is spent scanning the index. It performs dozens of index scans > before it's done, so it would vacuum the FSM quite often enough, even > if I were to increase the mwm setting n-fold. I hate to reply to myself, but I wanted to add: in any case, the case I'm trying to avoid is the case where the FSM *never* gets vacuumed. That's bad. But it may not be the phenomenon you're experiencing in your tests. >>> >>> I think the frequently vacuuming the FSM during long-time vacuum would >>> be worth to have in order to avoid a table bloating. The patch >>> triggers to vacuum the FSM after vacuumed the table and indexes but I >>> think that we can have a similar mechanism for a table with no index. >>> >>> Regards, >>> >>> -- >>> Masahiko Sawada >>> NIPPON TELEGRAPH AND TELEPHONE CORPORATION >>> NTT Open Source Software Center >> >> >> I could be wrong, but it looks like table without index doesn't >> suffer that much. Since there is no indices, there is only one stage - >> scanning heap, and no quadratic behavior cause of full dead-tuple array >> and repeating index vacuuming. >> > > The vacuuming the very large table with no index could also take a > long time, and it scans and vacuums blocks one by one. So I imagined > that we can vacuum the FSM once vacuumed a certain amount of blocks. > And that can avoid bloating table during the long-time vacuum. Could do that. I'll see about doing something of the sort and submitting it as a separate patch. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 27, 2017 at 5:48 PM, Sokolov Yura wrote: > On 2017-07-27 11:30, Masahiko Sawada wrote: >> >> On Tue, Jul 25, 2017 at 2:27 AM, Claudio Freire >> wrote: >>> >>> On Mon, Jul 24, 2017 at 2:20 PM, Claudio Freire >>> wrote: On Mon, Jul 24, 2017 at 2:10 PM, Sokolov Yura wrote: > > On 2017-07-24 19:11, Claudio Freire wrote: >> >> I was mostly thinking about something like the attached patch. >> >> Simple, unintrusive, and shouldn't cause any noticeable slowdown. > > > > Your change is small, clear, and currently useful for huge tables under > high update load (until "allowing vacuum to use more than 1GB memory" > is merged). In high-bloat conditions, it doesn't take long to accumulate 1GB of dead tuples (which is about 178M tuples, btw). The index scan takes way longer than the heap scan in that case. > But it still delays updating fsm until whole first batch of dead tuples > cleared (ie all indices scanned, and all heap pages cleared), and on > such > huge table it will be hours. So, true, it will get delayed considerably. But as you realized, there's not much point in trying to vacuum the FSM sooner, since it won't be accurate shortly afterwards anyway. Dead line pointers do use up a fair bit of space, especially on narrow tables. In a particular table I have that exhibits this problem, most of the time is spent scanning the index. It performs dozens of index scans before it's done, so it would vacuum the FSM quite often enough, even if I were to increase the mwm setting n-fold. >>> >>> >>> I hate to reply to myself, but I wanted to add: in any case, the case >>> I'm trying to avoid is the case where the FSM *never* gets vacuumed. >>> That's bad. But it may not be the phenomenon you're experiencing in >>> your tests. >>> >> >> I think the frequently vacuuming the FSM during long-time vacuum would >> be worth to have in order to avoid a table bloating. The patch >> triggers to vacuum the FSM after vacuumed the table and indexes but I >> think that we can have a similar mechanism for a table with no index. >> >> Regards, >> >> -- >> Masahiko Sawada >> NIPPON TELEGRAPH AND TELEPHONE CORPORATION >> NTT Open Source Software Center > > > I could be wrong, but it looks like table without index doesn't > suffer that much. Since there is no indices, there is only one stage - > scanning heap, and no quadratic behavior cause of full dead-tuple array > and repeating index vacuuming. > The vacuuming the very large table with no index could also take a long time, and it scans and vacuums blocks one by one. So I imagined that we can vacuum the FSM once vacuumed a certain amount of blocks. And that can avoid bloating table during the long-time vacuum. Regards, -- Masahiko Sawada NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-26 20:28, Sokolov Yura wrote: On 2017-07-26 19:46, Claudio Freire wrote: On Wed, Jul 26, 2017 at 1:39 PM, Sokolov Yura wrote: On 2017-07-24 12:41, Sokolov Yura wrote: test_master_1/pretty.log ... time activity tps latency stddev min max 11130 av+ch 198198ms374ms 7ms 1956ms 11160 av+ch 248163ms401ms 7ms 2601ms 11190 av+ch 321125ms363ms 7ms 2722ms 11220 av+ch 1155 35ms123ms 7ms 2668ms 11250 av+ch 1390 29ms 79ms 7ms 1422ms vs test_master_ring16_1/pretty.log time activity tps latency stddev min max 11130 av+ch 26 1575ms635ms101ms 2536ms 11160 av+ch 25 1552ms648ms 58ms 2376ms 11190 av+ch 32 1275ms726ms 16ms 2493ms 11220 av+ch 23 1584ms674ms 48ms 2454ms 11250 av+ch 35 1235ms777ms 22ms 3627ms That's a very huge change in latency for the worse Are you sure that's the ring buffer's doing and not some methodology snafu? Well, I tuned postgresql.conf so that there is no such catastrophic slows down on master branch. (with default settings such slowdown happens quite frequently). bgwriter_lru_maxpages = 10 (instead of default 200) were one of such tuning. Probably there were some magic "border" that triggers this behavior. Tuning postgresql.conf shifted master branch on "good side" of this border, and faster autovacuum crossed it to "bad side" again. Probably, backend_flush_after = 2MB (instead of default 0) is also part of this border. I didn't try to bench without this option yet. Any way, given checkpoint and autovacuum interference could be such noticeable, checkpoint clearly should affect autovacuum cost mechanism, imho. With regards, -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company I'll run two times with default postgresql.conf (except shared_buffers and maintence_work_mem) to find out behavior on default setting. Then I'll try to investigate checkpoint co-operation with autovacuum to fix behavior with "tuned" postgresql.conf. -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-27 11:30, Masahiko Sawada wrote: On Tue, Jul 25, 2017 at 2:27 AM, Claudio Freire wrote: On Mon, Jul 24, 2017 at 2:20 PM, Claudio Freire wrote: On Mon, Jul 24, 2017 at 2:10 PM, Sokolov Yura wrote: On 2017-07-24 19:11, Claudio Freire wrote: I was mostly thinking about something like the attached patch. Simple, unintrusive, and shouldn't cause any noticeable slowdown. Your change is small, clear, and currently useful for huge tables under high update load (until "allowing vacuum to use more than 1GB memory" is merged). In high-bloat conditions, it doesn't take long to accumulate 1GB of dead tuples (which is about 178M tuples, btw). The index scan takes way longer than the heap scan in that case. But it still delays updating fsm until whole first batch of dead tuples cleared (ie all indices scanned, and all heap pages cleared), and on such huge table it will be hours. So, true, it will get delayed considerably. But as you realized, there's not much point in trying to vacuum the FSM sooner, since it won't be accurate shortly afterwards anyway. Dead line pointers do use up a fair bit of space, especially on narrow tables. In a particular table I have that exhibits this problem, most of the time is spent scanning the index. It performs dozens of index scans before it's done, so it would vacuum the FSM quite often enough, even if I were to increase the mwm setting n-fold. I hate to reply to myself, but I wanted to add: in any case, the case I'm trying to avoid is the case where the FSM *never* gets vacuumed. That's bad. But it may not be the phenomenon you're experiencing in your tests. I think the frequently vacuuming the FSM during long-time vacuum would be worth to have in order to avoid a table bloating. The patch triggers to vacuum the FSM after vacuumed the table and indexes but I think that we can have a similar mechanism for a table with no index. Regards, -- Masahiko Sawada NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center I could be wrong, but it looks like table without index doesn't suffer that much. Since there is no indices, there is only one stage - scanning heap, and no quadratic behavior cause of full dead-tuple array and repeating index vacuuming. -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Tue, Jul 25, 2017 at 2:27 AM, Claudio Freire wrote: > On Mon, Jul 24, 2017 at 2:20 PM, Claudio Freire > wrote: >> On Mon, Jul 24, 2017 at 2:10 PM, Sokolov Yura >> wrote: >>> On 2017-07-24 19:11, Claudio Freire wrote: I was mostly thinking about something like the attached patch. Simple, unintrusive, and shouldn't cause any noticeable slowdown. >>> >>> >>> Your change is small, clear, and currently useful for huge tables under >>> high update load (until "allowing vacuum to use more than 1GB memory" >>> is merged). >> >> In high-bloat conditions, it doesn't take long to accumulate 1GB of >> dead tuples (which is about 178M tuples, btw). >> >> The index scan takes way longer than the heap scan in that case. >> >>> But it still delays updating fsm until whole first batch of dead tuples >>> cleared (ie all indices scanned, and all heap pages cleared), and on such >>> huge table it will be hours. >> >> So, true, it will get delayed considerably. But as you realized, >> there's not much point in trying to vacuum the FSM sooner, since it >> won't be accurate shortly afterwards anyway. Dead line pointers do use >> up a fair bit of space, especially on narrow tables. >> >> In a particular table I have that exhibits this problem, most of the >> time is spent scanning the index. It performs dozens of index scans >> before it's done, so it would vacuum the FSM quite often enough, even >> if I were to increase the mwm setting n-fold. > > I hate to reply to myself, but I wanted to add: in any case, the case > I'm trying to avoid is the case where the FSM *never* gets vacuumed. > That's bad. But it may not be the phenomenon you're experiencing in > your tests. > I think the frequently vacuuming the FSM during long-time vacuum would be worth to have in order to avoid a table bloating. The patch triggers to vacuum the FSM after vacuumed the table and indexes but I think that we can have a similar mechanism for a table with no index. Regards, -- Masahiko Sawada NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-26 19:46, Claudio Freire wrote: On Wed, Jul 26, 2017 at 1:39 PM, Sokolov Yura wrote: On 2017-07-24 12:41, Sokolov Yura wrote: test_master_1/pretty.log ... time activity tps latency stddev min max 11130 av+ch 198198ms374ms 7ms 1956ms 11160 av+ch 248163ms401ms 7ms 2601ms 11190 av+ch 321125ms363ms 7ms 2722ms 11220 av+ch 1155 35ms123ms 7ms 2668ms 11250 av+ch 1390 29ms 79ms 7ms 1422ms vs test_master_ring16_1/pretty.log time activity tps latency stddev min max 11130 av+ch 26 1575ms635ms101ms 2536ms 11160 av+ch 25 1552ms648ms 58ms 2376ms 11190 av+ch 32 1275ms726ms 16ms 2493ms 11220 av+ch 23 1584ms674ms 48ms 2454ms 11250 av+ch 35 1235ms777ms 22ms 3627ms That's a very huge change in latency for the worse Are you sure that's the ring buffer's doing and not some methodology snafu? Well, I tuned postgresql.conf so that there is no such catastrophic slows down on master branch. (with default settings such slowdown happens quite frequently). bgwriter_lru_maxpages = 10 (instead of default 200) were one of such tuning. Probably there were some magic "border" that triggers this behavior. Tuning postgresql.conf shifted master branch on "good side" of this border, and faster autovacuum crossed it to "bad side" again. Probably, backend_flush_after = 2MB (instead of default 0) is also part of this border. I didn't try to bench without this option yet. Any way, given checkpoint and autovacuum interference could be such noticeable, checkpoint clearly should affect autovacuum cost mechanism, imho. With regards, -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Wed, Jul 26, 2017 at 1:39 PM, Sokolov Yura wrote: > On 2017-07-24 12:41, Sokolov Yura wrote: > test_master_1/pretty.log ... > time activity tps latency stddev min max > 11130 av+ch 198198ms374ms 7ms 1956ms > 11160 av+ch 248163ms401ms 7ms 2601ms > 11190 av+ch 321125ms363ms 7ms 2722ms > 11220 av+ch 1155 35ms123ms 7ms 2668ms > 11250 av+ch 1390 29ms 79ms 7ms 1422ms vs > test_master_ring16_1/pretty.log > time activity tps latency stddev min max > 11130 av+ch 26 1575ms635ms101ms 2536ms > 11160 av+ch 25 1552ms648ms 58ms 2376ms > 11190 av+ch 32 1275ms726ms 16ms 2493ms > 11220 av+ch 23 1584ms674ms 48ms 2454ms > 11250 av+ch 35 1235ms777ms 22ms 3627ms That's a very huge change in latency for the worse Are you sure that's the ring buffer's doing and not some methodology snafu? -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Mon, Jul 24, 2017 at 2:20 PM, Claudio Freire wrote: > On Mon, Jul 24, 2017 at 2:10 PM, Sokolov Yura > wrote: >> On 2017-07-24 19:11, Claudio Freire wrote: >>> I was mostly thinking about something like the attached patch. >>> >>> Simple, unintrusive, and shouldn't cause any noticeable slowdown. >> >> >> Your change is small, clear, and currently useful for huge tables under >> high update load (until "allowing vacuum to use more than 1GB memory" >> is merged). > > In high-bloat conditions, it doesn't take long to accumulate 1GB of > dead tuples (which is about 178M tuples, btw). > > The index scan takes way longer than the heap scan in that case. > >> But it still delays updating fsm until whole first batch of dead tuples >> cleared (ie all indices scanned, and all heap pages cleared), and on such >> huge table it will be hours. > > So, true, it will get delayed considerably. But as you realized, > there's not much point in trying to vacuum the FSM sooner, since it > won't be accurate shortly afterwards anyway. Dead line pointers do use > up a fair bit of space, especially on narrow tables. > > In a particular table I have that exhibits this problem, most of the > time is spent scanning the index. It performs dozens of index scans > before it's done, so it would vacuum the FSM quite often enough, even > if I were to increase the mwm setting n-fold. I hate to reply to myself, but I wanted to add: in any case, the case I'm trying to avoid is the case where the FSM *never* gets vacuumed. That's bad. But it may not be the phenomenon you're experiencing in your tests. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Mon, Jul 24, 2017 at 2:10 PM, Sokolov Yura wrote: > On 2017-07-24 19:11, Claudio Freire wrote: >> >> On Mon, Jul 24, 2017 at 6:37 AM, Sokolov Yura >> wrote: >>> >>> Good day, Claudio >>> >>> >>> On 2017-07-22 00:27, Claudio Freire wrote: On Fri, Jul 21, 2017 at 2:41 PM, Sokolov Yura wrote: > > > > My friend noticed, that I didn't said why I bother with autovacuum. > Our customers suffers from table bloating. I've made synthetic > bloating test, and started experiments with modifying micro- and > auto-vacuum. My first attempts were to update FSM early (both in > micro and autovacuum) and update it upto root, not only low level. This FSM thing is probably not a bad idea as well. We're forced to run regular manual vacuums because for some tables autovacuums seems to never be enough, no matter how it's configured, mostly because it gets canceled all the time. These are high-churn, huge tables, so vacuuming them takes hours or days, there's always someone with a conflicting lock at some point that ends up canceling the autovacuum task. The above paragraph triggered me to go check, and it seems in those cases the FSM never gets vacuumed. That's probably not a good thing, but I don't see how to vacuum the FSM after a cancel. So vacuuming the FSM from time to time during long-running vacuums seems like a good idea at this point. >>> >>> >>> >>> Attached patch changes fsm update: instead of updating only lowest >>> level, it propagates space increase up to root. >>> >>> It slows autovacuum a bit, so that I didn't propose it together with >>> ring buffer increase. >> >> >> I was mostly thinking about something like the attached patch. >> >> Simple, unintrusive, and shouldn't cause any noticeable slowdown. > > > Your change is small, clear, and currently useful for huge tables under > high update load (until "allowing vacuum to use more than 1GB memory" > is merged). In high-bloat conditions, it doesn't take long to accumulate 1GB of dead tuples (which is about 178M tuples, btw). The index scan takes way longer than the heap scan in that case. > But it still delays updating fsm until whole first batch of dead tuples > cleared (ie all indices scanned, and all heap pages cleared), and on such > huge table it will be hours. So, true, it will get delayed considerably. But as you realized, there's not much point in trying to vacuum the FSM sooner, since it won't be accurate shortly afterwards anyway. Dead line pointers do use up a fair bit of space, especially on narrow tables. In a particular table I have that exhibits this problem, most of the time is spent scanning the index. It performs dozens of index scans before it's done, so it would vacuum the FSM quite often enough, even if I were to increase the mwm setting n-fold. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 12:51 PM, Tom Lane wrote: > Robert Haas writes: > > I think that's a valid point. There are also other concerns here - > > e.g. whether instead of adopting the patch as proposed we ought to (a) > > use some smaller size, or (b) keep the size as-is but reduce the > > maximum fraction of shared_buffers that can be consumed, or (c) divide > > the ring buffer size through by autovacuum_max_workers. Personally, > > of those approaches, I favor (b). I think a 16MB ring buffer is > > probably just fine if you've got 8GB of shared_buffers but I'm > > skeptical about it when you've got 128MB of shared_buffers. > > WFM. I agree with *not* dividing the basic ring buffer size by > autovacuum_max_workers. If you have allocated more AV workers, I think > you expect AV to go faster, not for the workers to start fighting among > themselves. > But fighting among themselves is just what they do regarding the autovacuum_vacuum_cost_limit, so I don't see why it should be one way there but different here. The reason for setting autovacuum_max_workers to N is so that small tables aren't completely starved of vacuuming even if N-1 larger tables are already being vacuumed simultaneously. Now the small tables get vacuumed at speed 1/N, which kind of sucks, but that is the mechanism we currently have. Of course just because we are in a hole with vacuum_cost_limit doesn't mean we should dig ourselves deeper, but we are being inconsistent then. Cheers, Jeff
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-24 19:11, Claudio Freire wrote: On Mon, Jul 24, 2017 at 6:37 AM, Sokolov Yura wrote: Good day, Claudio On 2017-07-22 00:27, Claudio Freire wrote: On Fri, Jul 21, 2017 at 2:41 PM, Sokolov Yura wrote: My friend noticed, that I didn't said why I bother with autovacuum. Our customers suffers from table bloating. I've made synthetic bloating test, and started experiments with modifying micro- and auto-vacuum. My first attempts were to update FSM early (both in micro and autovacuum) and update it upto root, not only low level. This FSM thing is probably not a bad idea as well. We're forced to run regular manual vacuums because for some tables autovacuums seems to never be enough, no matter how it's configured, mostly because it gets canceled all the time. These are high-churn, huge tables, so vacuuming them takes hours or days, there's always someone with a conflicting lock at some point that ends up canceling the autovacuum task. The above paragraph triggered me to go check, and it seems in those cases the FSM never gets vacuumed. That's probably not a good thing, but I don't see how to vacuum the FSM after a cancel. So vacuuming the FSM from time to time during long-running vacuums seems like a good idea at this point. Attached patch changes fsm update: instead of updating only lowest level, it propagates space increase up to root. It slows autovacuum a bit, so that I didn't propose it together with ring buffer increase. I was mostly thinking about something like the attached patch. Simple, unintrusive, and shouldn't cause any noticeable slowdown. Your change is small, clear, and currently useful for huge tables under high update load (until "allowing vacuum to use more than 1GB memory" is merged). But it still delays updating fsm until whole first batch of dead tuples cleared (ie all indices scanned, and all heap pages cleared), and on such huge table it will be hours. On the other hand, if "dead" tuples consumes all useful item pointer ( MaxHeapTuplesPerPage ~ 290 on 8k page), then space, that actually exists on a page, could not be used until "dead" tuples are converted into "unused" tuples. With my patch I've seen that writing FSM until dead tuples cleared helps a little: while bloating is slowed a little by this change, it is stopped only after final cleaning of dead tuples. -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Mon, Jul 24, 2017 at 6:37 AM, Sokolov Yura wrote: > Good day, Claudio > > > On 2017-07-22 00:27, Claudio Freire wrote: >> >> On Fri, Jul 21, 2017 at 2:41 PM, Sokolov Yura >> wrote: >>> >>> >>> My friend noticed, that I didn't said why I bother with autovacuum. >>> Our customers suffers from table bloating. I've made synthetic >>> bloating test, and started experiments with modifying micro- and >>> auto-vacuum. My first attempts were to update FSM early (both in >>> micro and autovacuum) and update it upto root, not only low level. >> >> >> This FSM thing is probably not a bad idea as well. >> >> We're forced to run regular manual vacuums because for some tables >> autovacuums seems to never be enough, no matter how it's configured, >> mostly because it gets canceled all the time. These are high-churn, >> huge tables, so vacuuming them takes hours or days, there's always >> someone with a conflicting lock at some point that ends up canceling >> the autovacuum task. >> >> The above paragraph triggered me to go check, and it seems in those >> cases the FSM never gets vacuumed. That's probably not a good thing, >> but I don't see how to vacuum the FSM after a cancel. So vacuuming the >> FSM from time to time during long-running vacuums seems like a good >> idea at this point. > > > Attached patch changes fsm update: instead of updating only lowest > level, it propagates space increase up to root. > > It slows autovacuum a bit, so that I didn't propose it together with > ring buffer increase. I was mostly thinking about something like the attached patch. Simple, unintrusive, and shouldn't cause any noticeable slowdown. From 5da264507058175e614f6ce7c77d2bd0491b1416 Mon Sep 17 00:00:00 2001 From: Claudio Freire Date: Mon, 24 Jul 2017 13:09:10 -0300 Subject: [PATCH] Vacuum FSM after each index pass This prevents concurrent writes from accumulating bloat due to recently freed space being invisible in the FSM yet. When vacuum can run for hours or days, this can make a huge difference. --- src/backend/commands/vacuumlazy.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/backend/commands/vacuumlazy.c b/src/backend/commands/vacuumlazy.c index fabb2f8d52..4d8d90e833 100644 --- a/src/backend/commands/vacuumlazy.c +++ b/src/backend/commands/vacuumlazy.c @@ -735,6 +735,9 @@ lazy_scan_heap(Relation onerel, int options, LVRelStats *vacrelstats, /* Remove tuples from heap */ lazy_vacuum_heap(onerel, vacrelstats); + /* Vacuum the Free Space Map */ + FreeSpaceMapVacuum(onerel); + /* * Forget the now-vacuumed tuples, and press on, but be careful * not to reset latestRemovedXid since we want that value to be -- 2.12.0 -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-21 20:41, Sokolov Yura wrote: On 2017-07-21 19:32, Robert Haas wrote: On Fri, Jul 21, 2017 at 4:19 AM, Sokolov Yura wrote: Probably with increased ring buffer there is no need in raising vacuum_cost_limit. Will you admit it? No, I definitely won't admit that. With default settings autovacuum won't write more than ~2.3MB/s if I remember the math correctly, so if you've got a 1TB table you're probably going to need a bigger value. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company I've seed autovacuum process spending >50% of its time in fsync (with current ring buffer) (but I used autovacuum_cost_delay=2ms). fsync could lasts up to second on hdd if there is concurrent IO. Even on ssd fsync could be really noticeable. But, I agree that for 1TB table autovacuum_cost_limit still should be increased, even with larger ring buffer. My friend noticed, that I didn't said why I bother with autovacuum. Our customers suffers from table bloating. I've made synthetic bloating test, and started experiments with modifying micro- and auto-vacuum. My first attempts were to update FSM early (both in micro and autovacuum) and update it upto root, not only low level. Then I looked to strace of autovacuum process, and noticed storm of fsync. I catched backtraces with gdb rooting on fsync, and found that evicting dirty pages from small ring buffer it the reason. After some experiments with combining my "early fsm update" and size of ring buffer, I understood that increasing ring buffer gives most of benefits: autovacuum runs faster, and bloating is greatly reduced. On extreme case, 400mb table bloats to 17GB on master, and only to 5GB with faster autovacuum. I used custom scripts, and that is why my statistic is not full. Though, I didn't found performance reduction. In fact, it looks like tests with "larger autovacuum ring" did more queries per hour than tests against master. I will run pgbench for weekend, so latencies and percentiles will be collected. With regards, -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company Default pgbench script wasn't able to trigger autovacuum of pgbench_accounts table in 8 hours (scale 400, 40 clients, 900tps average), so weekend testing were not useful. I will re-run with custom script for next day-two. -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
Good day, Claudio
On 2017-07-22 00:27, Claudio Freire wrote:
On Fri, Jul 21, 2017 at 2:41 PM, Sokolov Yura
wrote:
My friend noticed, that I didn't said why I bother with autovacuum.
Our customers suffers from table bloating. I've made synthetic
bloating test, and started experiments with modifying micro- and
auto-vacuum. My first attempts were to update FSM early (both in
micro and autovacuum) and update it upto root, not only low level.
This FSM thing is probably not a bad idea as well.
We're forced to run regular manual vacuums because for some tables
autovacuums seems to never be enough, no matter how it's configured,
mostly because it gets canceled all the time. These are high-churn,
huge tables, so vacuuming them takes hours or days, there's always
someone with a conflicting lock at some point that ends up canceling
the autovacuum task.
The above paragraph triggered me to go check, and it seems in those
cases the FSM never gets vacuumed. That's probably not a good thing,
but I don't see how to vacuum the FSM after a cancel. So vacuuming the
FSM from time to time during long-running vacuums seems like a good
idea at this point.
Attached patch changes fsm update: instead of updating only lowest
level, it propagates space increase up to root.
It slows autovacuum a bit, so that I didn't propose it together with
ring buffer increase.
--
Sokolov Yura aka funny_falcon
Postgres Professional: https://postgrespro.ru
The Russian Postgres CompanyFrom 60f76fc83ee8752362e037c1e19ed089d861e026 Mon Sep 17 00:00:00 2001
From: Sokolov Yura
Date: Mon, 3 Jul 2017 15:14:07 +0300
Subject: [PATCH] fsm&vacuum: write increasing of free space on upper levels
Every RecordPageWithFreeSpace update upper levels, if amount of free
spaces increased.
Also, do FreeSpaceMapVacuum after scanning heap and before vacuuming
indices.
---
src/backend/commands/vacuumlazy.c | 16 +-
src/backend/storage/freespace/freespace.c | 49 ++-
src/backend/storage/freespace/fsmpage.c | 4 ++-
src/include/storage/fsm_internals.h | 2 +-
4 files changed, 53 insertions(+), 18 deletions(-)
diff --git a/src/backend/commands/vacuumlazy.c b/src/backend/commands/vacuumlazy.c
index fc9c4f0fb1..a7fff0c5ae 100644
--- a/src/backend/commands/vacuumlazy.c
+++ b/src/backend/commands/vacuumlazy.c
@@ -595,7 +595,6 @@ lazy_scan_heap(Relation onerel, int options, LVRelStats *vacrelstats,
maxoff;
bool tupgone,
hastup;
- int prev_dead_count;
int nfrozen;
Size freespace;
bool all_visible_according_to_vm = false;
@@ -925,7 +924,6 @@ lazy_scan_heap(Relation onerel, int options, LVRelStats *vacrelstats,
has_dead_tuples = false;
nfrozen = 0;
hastup = false;
- prev_dead_count = vacrelstats->num_dead_tuples;
maxoff = PageGetMaxOffsetNumber(page);
/*
@@ -1245,16 +1243,16 @@ lazy_scan_heap(Relation onerel, int options, LVRelStats *vacrelstats,
vacrelstats->nonempty_pages = blkno + 1;
/*
- * If we remembered any tuples for deletion, then the page will be
- * visited again by lazy_vacuum_heap, which will compute and record
- * its post-compaction free space. If not, then we're done with this
- * page, so remember its free space as-is. (This path will always be
- * taken if there are no indexes.)
+ * heap_page_prune could free a bit of space. Lets record it
+ * immediatly despite it will by recorded again in lazy_vacuum_heap
+ * after more compaction.
*/
- if (vacrelstats->num_dead_tuples == prev_dead_count)
- RecordPageWithFreeSpace(onerel, blkno, freespace);
+ RecordPageWithFreeSpace(onerel, blkno, freespace);
}
+ /* fix up all tiny bits of freed space before vacuuming indices */
+ FreeSpaceMapVacuum(onerel);
+
/* report that everything is scanned and vacuumed */
pgstat_progress_update_param(PROGRESS_VACUUM_HEAP_BLKS_SCANNED, blkno);
diff --git a/src/backend/storage/freespace/freespace.c b/src/backend/storage/freespace/freespace.c
index 4648473523..ca0c356f28 100644
--- a/src/backend/storage/freespace/freespace.c
+++ b/src/backend/storage/freespace/freespace.c
@@ -107,6 +107,8 @@ static Size fsm_space_cat_to_avail(uint8 cat);
/* workhorse functions for various operations */
static int fsm_set_and_search(Relation rel, FSMAddress addr, uint16 slot,
uint8 newValue, uint8 minValue);
+static void fsm_set_recursive(Relation rel, FSMAddress addr, uint16 slot,
+ uint8 new_cat, bool only_increase);
static BlockNumber fsm_search(Relation rel, uint8 min_cat);
static uint8 fsm_vacuum_page(Relation rel, FSMAddress addr, bool *eof);
static BlockNumber fsm_get_lastblckno(Relation rel, FSMAddress addr);
@@ -173,9 +175,8 @@ RecordAndGetPageWithFreeSpace(Relation rel, BlockNumber oldPage,
/*
* RecordPageWithFreeSpace - update info about a page.
*
- * Note that if the new spaceAvail value is higher than the old value stored
- * in the FSM, the space might not become visible to searchers until the next
- * FreeSpaceMa
Re: [HACKERS] Increase Vacuum ring buffer.
On Fri, Jul 21, 2017 at 2:41 PM, Sokolov Yura wrote: > > My friend noticed, that I didn't said why I bother with autovacuum. > Our customers suffers from table bloating. I've made synthetic > bloating test, and started experiments with modifying micro- and > auto-vacuum. My first attempts were to update FSM early (both in > micro and autovacuum) and update it upto root, not only low level. This FSM thing is probably not a bad idea as well. We're forced to run regular manual vacuums because for some tables autovacuums seems to never be enough, no matter how it's configured, mostly because it gets canceled all the time. These are high-churn, huge tables, so vacuuming them takes hours or days, there's always someone with a conflicting lock at some point that ends up canceling the autovacuum task. The above paragraph triggered me to go check, and it seems in those cases the FSM never gets vacuumed. That's probably not a good thing, but I don't see how to vacuum the FSM after a cancel. So vacuuming the FSM from time to time during long-running vacuums seems like a good idea at this point. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-21 19:32, Robert Haas wrote: On Fri, Jul 21, 2017 at 4:19 AM, Sokolov Yura wrote: Probably with increased ring buffer there is no need in raising vacuum_cost_limit. Will you admit it? No, I definitely won't admit that. With default settings autovacuum won't write more than ~2.3MB/s if I remember the math correctly, so if you've got a 1TB table you're probably going to need a bigger value. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company I've seed autovacuum process spending >50% of its time in fsync (with current ring buffer) (but I used autovacuum_cost_delay=2ms). fsync could lasts up to second on hdd if there is concurrent IO. Even on ssd fsync could be really noticeable. But, I agree that for 1TB table autovacuum_cost_limit still should be increased, even with larger ring buffer. My friend noticed, that I didn't said why I bother with autovacuum. Our customers suffers from table bloating. I've made synthetic bloating test, and started experiments with modifying micro- and auto-vacuum. My first attempts were to update FSM early (both in micro and autovacuum) and update it upto root, not only low level. Then I looked to strace of autovacuum process, and noticed storm of fsync. I catched backtraces with gdb rooting on fsync, and found that evicting dirty pages from small ring buffer it the reason. After some experiments with combining my "early fsm update" and size of ring buffer, I understood that increasing ring buffer gives most of benefits: autovacuum runs faster, and bloating is greatly reduced. On extreme case, 400mb table bloats to 17GB on master, and only to 5GB with faster autovacuum. I used custom scripts, and that is why my statistic is not full. Though, I didn't found performance reduction. In fact, it looks like tests with "larger autovacuum ring" did more queries per hour than tests against master. I will run pgbench for weekend, so latencies and percentiles will be collected. With regards, -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Fri, Jul 21, 2017 at 4:19 AM, Sokolov Yura wrote: > You are one of leadership. I know it is not your job to test every tiny > change a school boy proposed. But here is a lot of people, who waits for > your word. Instead of cooling rush and closing discussions, you may just > say: "please, someone test it with that particular workload". I had no intention of cooling rush and closing discussions. I was trying to help you understand what points you needed to address in order to have a chance of getting this committed. I feel like I came into this discussion to try to help you make some progress on this issue, and instead of appreciating that, you're making me the bad guy. > When there is no garbage, increasing autovacuum ring buffer changes almost > nothing. When there is garbage, current small ring buffer leads to a storm > of fsyncs. Frequent fsyncs slows down hdd a lot, and then hdd isn't capable > to satisfy queries and refill OS cache. Will you admit it? I haven't tested it, but it sounds believable. >> I've also run into many customers whose problem that vacuum ran too >> slowly, and generally raising vacuum_cost_limit fixes that problem just >> fine. > > Probably with increased ring buffer there is no need in raising > vacuum_cost_limit. Will you admit it? No, I definitely won't admit that. With default settings autovacuum won't write more than ~2.3MB/s if I remember the math correctly, so if you've got a 1TB table you're probably going to need a bigger value. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-20 22:51, Tom Lane wrote:
Robert Haas writes:
I think that's a valid point. There are also other concerns here -
e.g. whether instead of adopting the patch as proposed we ought to (a)
use some smaller size, or (b) keep the size as-is but reduce the
maximum fraction of shared_buffers that can be consumed, or (c) divide
the ring buffer size through by autovacuum_max_workers. Personally,
of those approaches, I favor (b). I think a 16MB ring buffer is
probably just fine if you've got 8GB of shared_buffers but I'm
skeptical about it when you've got 128MB of shared_buffers.
WFM. I agree with *not* dividing the basic ring buffer size by
autovacuum_max_workers. If you have allocated more AV workers, I think
you expect AV to go faster, not for the workers to start fighting among
themselves.
It might, however, be reasonable for the fraction-of-shared-buffers
limitation to have something to do with autovacuum_max_workers, so that
you can't squeeze yourself out of shared_buffers if you set that number
really high. IOW, I think the upthread suggestion of
min(shared_buffers/8/autovacuum_workers, 16MB) is basically the right
idea, though we could debate the exact constants.
regards, tom lane
Attached version is with min(shared_buffers/8/autovacuum_workers, 16MB).
With regards
--
Sokolov Yura aka funny_falcon
Postgres Professional: https://postgrespro.ru
The Russian Postgres CompanyFrom 8ebd5e7eb498fdc75fc7b724ace1f6de8fbcf3fd Mon Sep 17 00:00:00 2001
From: Sokolov Yura
Date: Tue, 18 Jul 2017 12:33:33 +0300
Subject: [PATCH] Set total vacuum ring buffer 16MB
Vacuum suffers a lot from small ring buffer in a way bulk writer
suffered before Tom Lane's fix at 6382448cf96:
> the smaller size resulted in an undesirable decrease in bulk data
> loading speed, due to COPY processing frequently getting blocked
> for WAL flushing.
During discussion were decided to set it to
min(shared_buffers/8/autovacuum_max_workers, 16MB), so that many autovacuum
workers will not consume significant part of shared buffers.
---
src/backend/storage/buffer/freelist.c | 9 +++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/src/backend/storage/buffer/freelist.c b/src/backend/storage/buffer/freelist.c
index 9d8ae6ae8e..da83cd155b 100644
--- a/src/backend/storage/buffer/freelist.c
+++ b/src/backend/storage/buffer/freelist.c
@@ -16,6 +16,7 @@
#include "postgres.h"
#include "port/atomics.h"
+#include "postmaster/autovacuum.h"
#include "storage/buf_internals.h"
#include "storage/bufmgr.h"
#include "storage/proc.h"
@@ -526,6 +527,7 @@ GetAccessStrategy(BufferAccessStrategyType btype)
{
BufferAccessStrategy strategy;
int ring_size;
+ int n;
/*
* Select ring size to use. See buffer/README for rationales.
@@ -541,12 +543,15 @@ GetAccessStrategy(BufferAccessStrategyType btype)
case BAS_BULKREAD:
ring_size = 256 * 1024 / BLCKSZ;
+ n = 1;
break;
case BAS_BULKWRITE:
ring_size = 16 * 1024 * 1024 / BLCKSZ;
+ n = 1;
break;
case BAS_VACUUM:
- ring_size = 256 * 1024 / BLCKSZ;
+ ring_size = 16 * 1024 * 1024 / BLCKSZ;
+ n = autovacuum_max_workers;
break;
default:
@@ -556,7 +561,7 @@ GetAccessStrategy(BufferAccessStrategyType btype)
}
/* Make sure ring isn't an undue fraction of shared buffers */
- ring_size = Min(NBuffers / 8, ring_size);
+ ring_size = Min(NBuffers / 8 / n, ring_size);
/* Allocate the object and initialize all elements to zeroes */
strategy = (BufferAccessStrategy)
--
2.11.0
--
Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-20 20:59, Robert Haas wrote: If you want something changed, it's your job to do that testing. I've been testing for two weeks before I wrote to pgsql-hackers. And I wrote some highlevel results in first letter. I haven't noticed transactions slowdown from increased vacuum ring buffer. But: - my workload could be too synthetic, - I've measured total performed transactions, and sampled time of random ones. So probably my measurement were not exhaustive. And definitely I could not imagine whole set of interesting workloads. And given every test run for at least 5 hours (and, in fact, test run on master for 20 hours, cause autovacuum doesn't finish faster on that synthetic workload) I will spend at least half-year if I test all possible workloads. That is why I asked community to test it on workloads people consider interesting. I may measure by my self, if some tells me what workload he wants to be tested. Two previous discussions of the topic were killed without any evidence of testing at all, only with theoretical doubts. Is it fair? Why "probably it is bad" is better than "probably it is good"? You are one of leadership. I know it is not your job to test every tiny change a school boy proposed. But here is a lot of people, who waits for your word. Instead of cooling rush and closing discussions, you may just say: "please, someone test it with that particular workload". I don't think this discussion is really going anywhere unless you are willing to admit that increasing VACUUM performance could have some downsides. If you're not willing to admit that, there's not a lot to talk about here. I can admit many things. I've seen how autovacuum drops pgbench performance from 10tps down to 1500tps cause of contention on CLogControlLock. (btw my LWLock patch improves it to 3000tps). But that is not a reason autovacuum should be intentionally slow. How Stephen Frost said, that is what vacuum_cost_limit and vacuum_cost_delay are for. (and, certainly, it is reason to improve CLog and SLRU). OK, but I have helped *many* customers whose problem was that vacuum ran too fast and blew data out of the OS cache causing query response times to go through the roof. When there is no garbage, increasing autovacuum ring buffer changes almost nothing. When there is garbage, current small ring buffer leads to a storm of fsyncs. Frequent fsyncs slows down hdd a lot, and then hdd isn't capable to satisfy queries and refill OS cache. Will you admit it? I've also run into many customers whose problem that vacuum ran too slowly, and generally raising vacuum_cost_limit fixes that problem just fine. Probably with increased ring buffer there is no need in raising vacuum_cost_limit. Will you admit it? With regards, -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
Robert Haas writes: > I think that's a valid point. There are also other concerns here - > e.g. whether instead of adopting the patch as proposed we ought to (a) > use some smaller size, or (b) keep the size as-is but reduce the > maximum fraction of shared_buffers that can be consumed, or (c) divide > the ring buffer size through by autovacuum_max_workers. Personally, > of those approaches, I favor (b). I think a 16MB ring buffer is > probably just fine if you've got 8GB of shared_buffers but I'm > skeptical about it when you've got 128MB of shared_buffers. WFM. I agree with *not* dividing the basic ring buffer size by autovacuum_max_workers. If you have allocated more AV workers, I think you expect AV to go faster, not for the workers to start fighting among themselves. It might, however, be reasonable for the fraction-of-shared-buffers limitation to have something to do with autovacuum_max_workers, so that you can't squeeze yourself out of shared_buffers if you set that number really high. IOW, I think the upthread suggestion of min(shared_buffers/8/autovacuum_workers, 16MB) is basically the right idea, though we could debate the exact constants. regards, tom lane -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
* Robert Haas (robertmh...@gmail.com) wrote: > On Thu, Jul 20, 2017 at 3:04 PM, Stephen Frost wrote: > > I agree that it's a common problem for VACUUM to go too fast, or for > > VACUUM to go too slow, but that's really what the vacuum_cost_limit > > mechanism is for. > > I think that's a valid point. There are also other concerns here - > e.g. whether instead of adopting the patch as proposed we ought to (a) > use some smaller size, or (b) keep the size as-is but reduce the > maximum fraction of shared_buffers that can be consumed, or (c) divide > the ring buffer size through by autovacuum_max_workers. Personally, > of those approaches, I favor (b). I think a 16MB ring buffer is > probably just fine if you've got 8GB of shared_buffers but I'm > skeptical about it when you've got 128MB of shared_buffers. Right, agreed on that and that (b) looks to be a good option there. Thanks! Stephen signature.asc Description: Digital signature
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 3:04 PM, Stephen Frost wrote: > I agree that it's a common problem for VACUUM to go too fast, or for > VACUUM to go too slow, but that's really what the vacuum_cost_limit > mechanism is for. I think that's a valid point. There are also other concerns here - e.g. whether instead of adopting the patch as proposed we ought to (a) use some smaller size, or (b) keep the size as-is but reduce the maximum fraction of shared_buffers that can be consumed, or (c) divide the ring buffer size through by autovacuum_max_workers. Personally, of those approaches, I favor (b). I think a 16MB ring buffer is probably just fine if you've got 8GB of shared_buffers but I'm skeptical about it when you've got 128MB of shared_buffers. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
Robert, * Robert Haas (robertmh...@gmail.com) wrote: > On Thu, Jul 20, 2017 at 12:16 PM, Sokolov Yura > wrote: > > But in fact, vacuum process performs FSYNC! It happens, cause vacuum > > evicts dirty pages from its ring buffer. And to evict dirty page, it > > has to be sure WAL record about its modification is FSYNC-ed to WAL. > > Because ring buffer is damn small, vacuum almost always have to perform > > FSYNC by itself and have to do it very frequently (cause ring is damn > > small). > > > > With greater ring buffer, there is greater chance that fsync were > > performed by wal_writer process, or other backend. And even if > > vacuum does fsync by itself, it syncs records about more modified > > pages from its ring, so evicting next page is free. > > OK, but I have helped *many* customers whose problem was that vacuum > ran too fast and blew data out of the OS cache causing query response > times to go through the roof. That's a common problem. Making VACUUM > run faster will presumably make it more common. I've also run into > many customers whose problem that vacuum ran too slowly, and generally > raising vacuum_cost_limit fixes that problem just fine. So I don't > think it's nearly as clear as you do that making VACUUM run faster is > desirable. I agree that it's a common problem for VACUUM to go too fast, or for VACUUM to go too slow, but that's really what the vacuum_cost_limit mechanism is for. I can see an argument that existing tuned systems which have been expecting the small ring-buffer to help slow down VACUUM may have to be adjusted to handle a change, though I would think that other changes we've made might also require changes to vacuum costing, so I'm not sure that this is particularly different in that regard. What I don't agree with is holding off on improving VACUUM in the case where cost delay is set to zero because we think people might be depending on it only going so fast in that case. If the cost delay is set to zero, then VACUUM really should be going as fast as it can and we should welcome improvments in that area in much the same way that we welcome performance improvements in sorting and other backend algorithms. > > If some fears that increasing vacuum ring buffer will lead to > > decreasing transaction performance, then why it were not exhaustively > > tested? > > If you want something changed, it's your job to do that testing. > Asking why nobody else tested the effects of changing the thing you > want changed is like asking why nobody else wrote the patch you want > written. I do agree with this. Asking for others to also test is fine, but it's the patch submitter who needs to ensure that said testing actually happens and that results are provided to -hackers to support the change. In particular, multiple different scenarios (DB all in shared_buffers, DB all in OS cache, DB not able to fit in memory at all, etc) should be tested. > > And possible community will decide, that it should be GUC variable: > > - if one prefers to keep its database unbloated, he could increase > > vacuum ring buffer, > > - otherwise just left it in "safe-but-slow" default. > > That's a possible outcome, but I don't think this discussion is really > going anywhere unless you are willing to admit that increasing VACUUM > performance could have some downsides. If you're not willing to admit > that, there's not a lot to talk about here. I'd rather we encourage people to use the existing knobs for tuning VACUUM speed rather than adding another one that ends up being actually only a proxy for speed. If there's a memory utilization concern here, then having a knob for that might make sense, but it sounds like the concern here is more about the speed and less about coming up with a reasonable way to scale the size of the ring buffer. Of course, I'm all for coming up with a good way to size the ring buffer, and providing a knob if we aren't able to do so, I just don't want to add unnecessary knobs if we don't need them. Thanks! Stephen signature.asc Description: Digital signature
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 12:16 PM, Sokolov Yura wrote: > So, from my point of view, no one just evaluate performance of increased > ring buffer for vacuum. I think that argument is clearly incorrect. In commit 6382448cf96a9b88d418cbaf86027b63f465b5d8, which you cited, Tom even added a note in the README file about why he didn't increase the value for vacuum also. He knew it would have increased performance had he also done it for BAS_BULKWRITE, and I knew it too, but it wasn't clear that it was a good idea, and it's still not. > But in fact, vacuum process performs FSYNC! It happens, cause vacuum > evicts dirty pages from its ring buffer. And to evict dirty page, it > has to be sure WAL record about its modification is FSYNC-ed to WAL. > Because ring buffer is damn small, vacuum almost always have to perform > FSYNC by itself and have to do it very frequently (cause ring is damn > small). > > With greater ring buffer, there is greater chance that fsync were > performed by wal_writer process, or other backend. And even if > vacuum does fsync by itself, it syncs records about more modified > pages from its ring, so evicting next page is free. OK, but I have helped *many* customers whose problem was that vacuum ran too fast and blew data out of the OS cache causing query response times to go through the roof. That's a common problem. Making VACUUM run faster will presumably make it more common. I've also run into many customers whose problem that vacuum ran too slowly, and generally raising vacuum_cost_limit fixes that problem just fine. So I don't think it's nearly as clear as you do that making VACUUM run faster is desirable. > If some fears that increasing vacuum ring buffer will lead to > decreasing transaction performance, then why it were not exhaustively > tested? If you want something changed, it's your job to do that testing. Asking why nobody else tested the effects of changing the thing you want changed is like asking why nobody else wrote the patch you want written. > And possible community will decide, that it should be GUC variable: > - if one prefers to keep its database unbloated, he could increase > vacuum ring buffer, > - otherwise just left it in "safe-but-slow" default. That's a possible outcome, but I don't think this discussion is really going anywhere unless you are willing to admit that increasing VACUUM performance could have some downsides. If you're not willing to admit that, there's not a lot to talk about here. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 7:59 AM, Robert Haas wrote: > > > > Initially I wanted to make BAS_BULKWRITE and BAS_VACUUM ring sizes > > configurable, but after testing I don't see much gain from increasing > > ring buffer above 16MB. So I propose just 1 line change. > > I think the question for this patch is "so, why didn't we do it this > way originally?". > > It's no secret that making the ring buffer larger will improve > performance -- in fact, not having a ring buffer at all would improve > performance even more. But it would also increase the likelihood that > the background work of vacuum would impact the performance of > foreground operations, which is already a pretty serious problem that > we probably don't want to make worse. But having a very fast sequence of fdatasync calls is not terribly friendly to the performance of the foreground operations, either. I think the reason we didn't do it this way originally is tied the same reason that autovacuum_vacuum_cost_delay = 20ms by default. If we want it to be heavily throttled, there isn't much point in using a larger ring buffer. It is just wasted space. Maybe we could have it start out at BAS_VACUUM's default size, then grow by one buffer every time it had to issue a WAL sync, until it reached BAS_BULKWRITE's size where it would max out. Cheers, Jeff
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 1:08 PM, Claudio Freire wrote: > So, the 64x increase may be justifiable in absolute terms: it's not > unlikely that a 16MB buffer will be evicted from the OS cache before > vacuum is done with it, even in heavily throttled vacuums. Sorry, that should read "It's not *likely* that a 16MB buffer will be evicted" -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-20 19:04, Tom Lane wrote: Claudio Freire writes: On Thu, Jul 20, 2017 at 11:59 AM, Robert Haas wrote: I think the question for this patch is "so, why didn't we do it this way originally?". It's no secret that making the ring buffer larger will improve performance -- in fact, not having a ring buffer at all would improve performance even more. But it would also increase the likelihood that the background work of vacuum would impact the performance of foreground operations, which is already a pretty serious problem that we probably don't want to make worse. I'm not certain what the right decision is here, but I think that a careful analysis of possible downsides is needed. IIRC, originally, the default shared_buffers settings was tiny. At the time we set the ring buffer size to 256K, the maximum shared_buffers that initdb would configure was 32MB; and you often didn't get that much due to SHMMAX. Now of course it's 128MB, and you'll pretty much always get that. So there's certainly room to argue that it's time to increase vacuum's ring buffer size, but that line of argument doesn't justify more than ~10X increase at most. Like Robert, I'm afraid of changing this number in a vacuum (ahem). If you've got the default number of autovacuum workers going (3), you'd have them thrashing a total of 3/8ths of shared memory by default, which seems like a lot. We do need to look at the impact on foreground processing, and not just at the speed of vacuum itself. One idea for addressing this would be to raise the max values in the switch, but tighten the fraction-of-shared-buffers limit just below. I wouldn't have any objection to a 16MB ring buffer for vacuum when it is coming out of a 1GB arena ... it just seems like a rather large fraction of 128MB to give to a background process, especially to each of several background processes. Maybe the fraction-of-shared-buffers shouldn't be one size fits all, but a different limit for each case? regards, tom lane It could be 'min(shared_buffers/8/autovacuum_workers, 16MB)'. It quite rarely people live shared_buffers as 128MB, and those people don't really care about other settings. So 5MB will be enough for their autovacuum's ring buffer. People, who care about tuning its postgresql, will increase their shared_buffers, and autovacuum will have its 16MB ring buffer. With regards, -- Sokolov Yura aka funny_falcon Postgres Professional: https://postgrespro.ru The Russian Postgres Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On 2017-07-20 17:59, Robert Haas wrote: On Tue, Jul 18, 2017 at 6:09 AM, Sokolov Yura wrote: I investigated autovacuum performance, and found that it suffers a lot from small ring buffer. It suffers in a same way bulk writer suffered before Tom Lane's commit 6382448cf96: Tom Lane 2009-06-23 00:04:28 For bulk write operations (eg COPY IN), use a ring buffer of 16MB instead of the 256KB limit originally enforced by a patch committed 2008-11-06. Per recent test results, the smaller size resulted in an undesirable decrease in bulk data loading speed, due to COPY processing frequently getting blocked for WAL flushing. This area might need more tweaking later, but this setting seems to be good enough for 8.4. It is especially noticable when database doesn't fit in shared_buffers but fit into OS file cache, and data is intensively updated (ie OLTP load). In this scenario autovacuum with current 256kB (32 pages) ring buffer lasts 3-10 times longer than with increased to 16MB ring buffer. I've tested with synthetic load with 256MB or 1GB shared buffers and 2-6GB (with indices) tables, with different load factor and with/without secondary indices on updated columns. Table were randomly updated with hot and non-hot updates. Times before/after buffer increase (depending on load) were 7500sec/1200sec, 75000sec/11500sec. So benefit is consistently reproducible. I didn't tested cases when database doesn't fit OS file cache. Probably in this case benefit will be smaller cause more time will be spent in disk read. I didn't test intensively OLAP load. I've seen once that increased buffer slows a bit scanning almost immutable huge table, perhaps cause of decreased CPU cache locality. But given such scan is already fast, and autovacuum of "almost immutable table" runs rarely, I don't think it is very important. Initially I wanted to make BAS_BULKWRITE and BAS_VACUUM ring sizes configurable, but after testing I don't see much gain from increasing ring buffer above 16MB. So I propose just 1 line change. I think the question for this patch is "so, why didn't we do it this way originally?". It's no secret that making the ring buffer larger will improve performance -- in fact, not having a ring buffer at all would improve performance even more. But it would also increase the likelihood that the background work of vacuum would impact the performance of foreground operations, which is already a pretty serious problem that we probably don't want to make worse. I'm not certain what the right decision is here, but I think that a careful analysis of possible downsides is needed. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company Initially, ring buffer were introduced for sequential scan. It was added for vacuum "for a company", and before introducing vacuum used just 1 page, so giving 32 pages to was huge improvement: d526575f893c1a4e05ebd Tom Lane 2007-05-31 00:12:03 "Make large sequential scans and VACUUMs work in a limited-size "ring" of buffers, rather than blowing out the whole shared-buffer arena. Aside from avoiding cache spoliation, this fixes the problem that VACUUM formerly tended to cause a WAL flush for every page it modified, because we had it hacked to use only a single buffer." Later ring buffer were added for bulk writer, but the same 32 pages: 85e2cedf985bfecaf43a18ca Tom Lane 2008-11-06 23:51:15 " Improve bulk-insert performance by keeping the current target buffer pinned (but not locked, as that would risk deadlocks). Also, make it work in a small ring of buffers to avoid having bulk inserts trash the whole buffer arena. Robert Haas, after an idea of Simon Riggs'." And finally after some real world usage buffer for bulk writer were increased 6382448cf96a9b88 Tom Lane 2009-06-23 00:04:28 " For bulk write operations (eg COPY IN), use a ring buffer of 16MB instead of the 256KB limit originally enforced by a patch committed 2008-11-06. Per recent test results, the smaller size resulted in an undesirable decrease in bulk data loading speed, due to COPY processing frequently getting blocked for WAL flushing. This area might need more tweaking later, but this setting seems to be good enough for 8.4." So, from my point of view, no one just evaluate performance of increased ring buffer for vacuum. It were discussed year age: https://www.postgresql.org/message-id/flat/CA%2BTgmobmP%3DKE-z5f7-CegXMFGRbV%3DhC%2B%3DFxb2mbhpfD-ZD%3D-bA%40mail.gmail.com#CA+TgmobmP=KE-z5f7-CegXMFGRbV=hC+=Fxb2mbhpfD-ZD=-b...@mail.gmail.com There was your, Robert wrong assumption: But all that does is force the backend to write to the operating system, which is where the real buffering happens. But in fact, vacuum process performs FSYNC! It happens, cause vacuum evicts dirty pages from its ring buffer. And to evict dirty page, it has to be sure WAL record about its modification is FSYNC-ed to WAL. Because ring buffer is damn sma
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 12:51 PM, Robert Haas wrote: > On Thu, Jul 20, 2017 at 11:09 AM, Claudio Freire > wrote: >>> It's no secret that making the ring buffer larger will improve >>> performance -- in fact, not having a ring buffer at all would improve >>> performance even more. But it would also increase the likelihood that >>> the background work of vacuum would impact the performance of >>> foreground operations, which is already a pretty serious problem that >>> we probably don't want to make worse. I'm not certain what the right >>> decision is here, but I think that a careful analysis of possible >>> downsides is needed. >> >> IIRC, originally, the default shared_buffers settings was tiny. > > It is true that we increased the default shared_buffers value from > 32MB to 128MB in f358428280953643313ee7756e0a8b8ccfde7660, but it's > also true ring buffers are capped at 1/8th of shared_buffers > regardless of anything else, so I don't think that's the explanation > here. Even if that weren't the case, how would a 4x increase in the > default size of shared_buffers (which is probably the most-commonly > changed GUC of any that PostgreSQL has) justify a 64x increase in the > size of the ring buffer? I'm theorizing here, because I've not been involved in any of those decisions. But I have been stracing and checking on vacuum quite frequently lately, so my 2 cents: The 4x increase in shared_buffers acknowledges increases in available host memory over the years. It's not just about how much of shared_buffers is dedicated to the ring buffer, but also whether we can reasonably expect the whole ring to remain in the OS cache while it's getting dirtied. Vacuum will almost always dirty pages once and never again, and flushing dirty pages back to the OS cache ASAP helps avoid a read-modify-write cycle if the page didn't leave the OS cache. That's more likely to happen with smaller rings than with bigger rings. But as memory increases, the ring can be made bigger without fear of it falling from the OS cache prematurely. So, the 64x increase may be justifiable in absolute terms: it's not unlikely that a 16MB buffer will be evicted from the OS cache before vacuum is done with it, even in heavily throttled vacuums. Memory pressure on the host would have to be insane to cause that, in modern systems with GBs of RAM. That might not have been true in the early days. Now, whether autovacuum would suck up a big portion of the shared_buffers or not, is another matter. Perhaps the ring buffer could tune itself to whatever limit seems comfortable in that regard, the way it does with other GUCs (like cost_limit): divide it among the number of workers? -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
Claudio Freire writes: > On Thu, Jul 20, 2017 at 11:59 AM, Robert Haas wrote: >> I think the question for this patch is "so, why didn't we do it this >> way originally?". >> >> It's no secret that making the ring buffer larger will improve >> performance -- in fact, not having a ring buffer at all would improve >> performance even more. But it would also increase the likelihood that >> the background work of vacuum would impact the performance of >> foreground operations, which is already a pretty serious problem that >> we probably don't want to make worse. I'm not certain what the right >> decision is here, but I think that a careful analysis of possible >> downsides is needed. > IIRC, originally, the default shared_buffers settings was tiny. At the time we set the ring buffer size to 256K, the maximum shared_buffers that initdb would configure was 32MB; and you often didn't get that much due to SHMMAX. Now of course it's 128MB, and you'll pretty much always get that. So there's certainly room to argue that it's time to increase vacuum's ring buffer size, but that line of argument doesn't justify more than ~10X increase at most. Like Robert, I'm afraid of changing this number in a vacuum (ahem). If you've got the default number of autovacuum workers going (3), you'd have them thrashing a total of 3/8ths of shared memory by default, which seems like a lot. We do need to look at the impact on foreground processing, and not just at the speed of vacuum itself. One idea for addressing this would be to raise the max values in the switch, but tighten the fraction-of-shared-buffers limit just below. I wouldn't have any objection to a 16MB ring buffer for vacuum when it is coming out of a 1GB arena ... it just seems like a rather large fraction of 128MB to give to a background process, especially to each of several background processes. Maybe the fraction-of-shared-buffers shouldn't be one size fits all, but a different limit for each case? regards, tom lane -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 11:09 AM, Claudio Freire wrote: >> It's no secret that making the ring buffer larger will improve >> performance -- in fact, not having a ring buffer at all would improve >> performance even more. But it would also increase the likelihood that >> the background work of vacuum would impact the performance of >> foreground operations, which is already a pretty serious problem that >> we probably don't want to make worse. I'm not certain what the right >> decision is here, but I think that a careful analysis of possible >> downsides is needed. > > IIRC, originally, the default shared_buffers settings was tiny. It is true that we increased the default shared_buffers value from 32MB to 128MB in f358428280953643313ee7756e0a8b8ccfde7660, but it's also true ring buffers are capped at 1/8th of shared_buffers regardless of anything else, so I don't think that's the explanation here. Even if that weren't the case, how would a 4x increase in the default size of shared_buffers (which is probably the most-commonly changed GUC of any that PostgreSQL has) justify a 64x increase in the size of the ring buffer? -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Thu, Jul 20, 2017 at 11:59 AM, Robert Haas wrote: > On Tue, Jul 18, 2017 at 6:09 AM, Sokolov Yura > wrote: >> I investigated autovacuum performance, and found that it suffers a lot >> from small ring buffer. It suffers in a same way bulk writer suffered >> before Tom Lane's commit 6382448cf96: >> >>> Tom Lane 2009-06-23 00:04:28 >>> For bulk write operations (eg COPY IN), use a ring buffer of 16MB >>> instead of the 256KB limit originally enforced by a patch committed >>> 2008-11-06. Per recent test results, the smaller size resulted in an >>> undesirable decrease in bulk data loading speed, due to COPY >>> processing frequently getting blocked for WAL flushing. This area >>> might need more tweaking later, but this setting seems to be good >>> enough for 8.4. >> >> It is especially noticable when database doesn't fit in shared_buffers >> but fit into OS file cache, and data is intensively updated (ie OLTP >> load). In this scenario autovacuum with current 256kB (32 pages) ring >> buffer lasts 3-10 times longer than with increased to 16MB ring buffer. >> >> I've tested with synthetic load with 256MB or 1GB shared buffers and >> 2-6GB (with indices) tables, with different load factor and with/without >> secondary indices on updated columns. Table were randomly updated with >> hot and non-hot updates. Times before/after buffer increase (depending >> on load) were 7500sec/1200sec, 75000sec/11500sec. So benefit is >> consistently reproducible. >> >> I didn't tested cases when database doesn't fit OS file cache. Probably >> in this case benefit will be smaller cause more time will be spent in >> disk read. >> I didn't test intensively OLAP load. I've seen once that increased >> buffer slows a bit scanning almost immutable huge table, perhaps cause >> of decreased CPU cache locality. But given such scan is already fast, >> and autovacuum of "almost immutable table" runs rarely, I don't think >> it is very important. >> >> Initially I wanted to make BAS_BULKWRITE and BAS_VACUUM ring sizes >> configurable, but after testing I don't see much gain from increasing >> ring buffer above 16MB. So I propose just 1 line change. > > I think the question for this patch is "so, why didn't we do it this > way originally?". > > It's no secret that making the ring buffer larger will improve > performance -- in fact, not having a ring buffer at all would improve > performance even more. But it would also increase the likelihood that > the background work of vacuum would impact the performance of > foreground operations, which is already a pretty serious problem that > we probably don't want to make worse. I'm not certain what the right > decision is here, but I think that a careful analysis of possible > downsides is needed. IIRC, originally, the default shared_buffers settings was tiny. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: [HACKERS] Increase Vacuum ring buffer.
On Tue, Jul 18, 2017 at 6:09 AM, Sokolov Yura wrote: > I investigated autovacuum performance, and found that it suffers a lot > from small ring buffer. It suffers in a same way bulk writer suffered > before Tom Lane's commit 6382448cf96: > >> Tom Lane 2009-06-23 00:04:28 >> For bulk write operations (eg COPY IN), use a ring buffer of 16MB >> instead of the 256KB limit originally enforced by a patch committed >> 2008-11-06. Per recent test results, the smaller size resulted in an >> undesirable decrease in bulk data loading speed, due to COPY >> processing frequently getting blocked for WAL flushing. This area >> might need more tweaking later, but this setting seems to be good >> enough for 8.4. > > It is especially noticable when database doesn't fit in shared_buffers > but fit into OS file cache, and data is intensively updated (ie OLTP > load). In this scenario autovacuum with current 256kB (32 pages) ring > buffer lasts 3-10 times longer than with increased to 16MB ring buffer. > > I've tested with synthetic load with 256MB or 1GB shared buffers and > 2-6GB (with indices) tables, with different load factor and with/without > secondary indices on updated columns. Table were randomly updated with > hot and non-hot updates. Times before/after buffer increase (depending > on load) were 7500sec/1200sec, 75000sec/11500sec. So benefit is > consistently reproducible. > > I didn't tested cases when database doesn't fit OS file cache. Probably > in this case benefit will be smaller cause more time will be spent in > disk read. > I didn't test intensively OLAP load. I've seen once that increased > buffer slows a bit scanning almost immutable huge table, perhaps cause > of decreased CPU cache locality. But given such scan is already fast, > and autovacuum of "almost immutable table" runs rarely, I don't think > it is very important. > > Initially I wanted to make BAS_BULKWRITE and BAS_VACUUM ring sizes > configurable, but after testing I don't see much gain from increasing > ring buffer above 16MB. So I propose just 1 line change. I think the question for this patch is "so, why didn't we do it this way originally?". It's no secret that making the ring buffer larger will improve performance -- in fact, not having a ring buffer at all would improve performance even more. But it would also increase the likelihood that the background work of vacuum would impact the performance of foreground operations, which is already a pretty serious problem that we probably don't want to make worse. I'm not certain what the right decision is here, but I think that a careful analysis of possible downsides is needed. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
