Re: [PHP-DB] More Apache Installation problems
Alex, Congrats at getting Apache off the ground. Lots of advice here about hardware, but... Are both your WS and Svr Windows boxes? If so, which OpSys? If you want both to share access to the Internet, consider modem sharing or ICS (Internet Connection Service - IIRC - M$ not v.generous on advice about this, except 50,000 repeat-pages telling you how to get it going). If the problem is simply getting the two machines to 'see' each other, eg for in-house web serving only, then the issue is one of DNS or WINS naming. Which do you use/run a server for? If the answer is basically neither, then we should introduce a static naming system for your two machines (do NOT use this method in conjunction with ICS!): - use WinExplorer to burrow down to C:\WINNT\system32\drivers\etc (YMMV by OpSys) - use Notepad to open hosts (NB no filetype/extension or 'dot'). - you should see lines such as: 127.0.0.1 localhost - copy-and-paste that line to a new line below - alter the IP address to the appropriate 192.168.1.n (different on each machine) - alter the localhost to a suitable network name for each machine, eg Fred and Barney - repeat on the other machine (IPaddr and name must be unique/different) - reboot both machines - use DOS box from one to ping the other machine's IPaddr, then networkNm - repeat from other machine - use IE and try both IPaddr and networkNm in Address: field should now work (pre-requisite: holding your tongue correctly) NB have assumed that TCP/IP is up and running on both boxes NBB by repeating the localhost line copy, using the same 192... IPaddr but changing the networkNm, you can add VirtualHosts to your Apache config on that particular machine, ie have more than one named 'web site' under the one server. NBBB the host files are static and easy to maintain in this scenario, but quickly get out of control in a corporate environment - which is why we would then use a WINS and/or DNS server! Hope it helps, =dn - Original Message - From: Adam Williams [EMAIL PROTECTED] To: Alex Francis [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Monday, December 09, 2002 8:53 PM Subject: Re: [PHP-DB] More Apache Installation problems what you need to do is have 1 nic going directly to your cable modem using a cross over cable, and then with the 2nd NIC in your WS plug it into the hub along with the web server box, or ditch the hub and connect the WS to the web server with a cross over cable. Adam On Mon, 9 Dec 2002, Alex Francis wrote: Adam, You are correct. I had two NICs, set up exactly as you describe, but kept getting problems (I would lose my internet connection and have to reboot to get it back. I think I will try againand if that fails, buy a cable modem router. Adam Williams [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... No I think he has his WS with a real IP from his ISP and then his web server plugged into the same hub as his WS but with 192.168.1.1. He'll either need to get a 2nd NIC and give it an ip like 192.168.1.2 or get a cable modem router. Or change his WS to linux and add eth0:0 with 192.168.1.2 :) Adam On Mon, 9 Dec 2002, Gene Dymarskiy wrote: I am a bit confused. Your WS is connected to cable modem and gets public IP assigned by your ISP. Your WS is also connected to a hub shared with your web server. does it mean you have two network cards, one connected to cable modem, and the other to the hub? -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:20 PM To: Gene Dymarskiy Subject: RE: [PHP-DB] More Apache Installation problems I need to have a server assigned IP address on my workstation for my cable modem. -Original Message- From: Gene Dymarskiy [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 8:06 PM To: Alex Francis; [EMAIL PROTECTED] Subject: RE: [PHP-DB] More Apache Installation problems I'd check IP address of your workstation. make sure both the WS and the server are on the same subnet. Your WS should have 192.168 address, too. good luck -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:00 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, Decemb
[PHP-DB] More Apache Installation problems
At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP-DB] More Apache Installation problems
make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] More Apache Installation problems
can your main workstation ping 192.168.1.1 On Mon, 9 Dec 2002, Alex Francis wrote: At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] More Apache Installation problems
It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] More Apache Installation problems
can you ping your router? is it filtering ICMP? can you ping anything? is your cat 5 cable crimped properly and you have link lights on your switch/hub/router and network card? Adam On Mon, 9 Dec 2002, Alex Francis wrote: It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP-DB] More Apache Installation problems
I'd check IP address of your workstation. make sure both the WS and the server are on the same subnet. Your WS should have 192.168 address, too. good luck -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:00 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] More Apache Installation problems
Sorry, you have lost me. I have a hub with my cable modem connected and also my workstation and server. I only connect to the internet from my workstation since I need to allow my IP address to be set by my ISP and they will only allow one IP address per connection. That,s as far as I can go with the information. I don't know if I can ping anything else since I don't know how to. As you will realise I am a complete newbie who is trying to run before I can walk. Adam Williams [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... can you ping your router? is it filtering ICMP? can you ping anything? is your cat 5 cable crimped properly and you have link lights on your switch/hub/router and network card? Adam On Mon, 9 Dec 2002, Alex Francis wrote: It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP-DB] More Apache Installation problems
I am a bit confused. Your WS is connected to cable modem and gets public IP assigned by your ISP. Your WS is also connected to a hub shared with your web server. does it mean you have two network cards, one connected to cable modem, and the other to the hub? -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:20 PM To: Gene Dymarskiy Subject: RE: [PHP-DB] More Apache Installation problems I need to have a server assigned IP address on my workstation for my cable modem. -Original Message- From: Gene Dymarskiy [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 8:06 PM To: Alex Francis; [EMAIL PROTECTED] Subject: RE: [PHP-DB] More Apache Installation problems I'd check IP address of your workstation. make sure both the WS and the server are on the same subnet. Your WS should have 192.168 address, too. good luck -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:00 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP-DB] More Apache Installation problems
No I think he has his WS with a real IP from his ISP and then his web server plugged into the same hub as his WS but with 192.168.1.1. He'll either need to get a 2nd NIC and give it an ip like 192.168.1.2 or get a cable modem router. Or change his WS to linux and add eth0:0 with 192.168.1.2 :) Adam On Mon, 9 Dec 2002, Gene Dymarskiy wrote: I am a bit confused. Your WS is connected to cable modem and gets public IP assigned by your ISP. Your WS is also connected to a hub shared with your web server. does it mean you have two network cards, one connected to cable modem, and the other to the hub? -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:20 PM To: Gene Dymarskiy Subject: RE: [PHP-DB] More Apache Installation problems I need to have a server assigned IP address on my workstation for my cable modem. -Original Message- From: Gene Dymarskiy [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 8:06 PM To: Alex Francis; [EMAIL PROTECTED] Subject: RE: [PHP-DB] More Apache Installation problems I'd check IP address of your workstation. make sure both the WS and the server are on the same subnet. Your WS should have 192.168 address, too. good luck -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:00 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] More Apache Installation problems
Adam, You are correct. I had two NICs, set up exactly as you describe, but kept getting problems (I would lose my internet connection and have to reboot to get it back. I think I will try againand if that fails, buy a cable modem router. Adam Williams [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... No I think he has his WS with a real IP from his ISP and then his web server plugged into the same hub as his WS but with 192.168.1.1. He'll either need to get a 2nd NIC and give it an ip like 192.168.1.2 or get a cable modem router. Or change his WS to linux and add eth0:0 with 192.168.1.2 :) Adam On Mon, 9 Dec 2002, Gene Dymarskiy wrote: I am a bit confused. Your WS is connected to cable modem and gets public IP assigned by your ISP. Your WS is also connected to a hub shared with your web server. does it mean you have two network cards, one connected to cable modem, and the other to the hub? -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:20 PM To: Gene Dymarskiy Subject: RE: [PHP-DB] More Apache Installation problems I need to have a server assigned IP address on my workstation for my cable modem. -Original Message- From: Gene Dymarskiy [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 8:06 PM To: Alex Francis; [EMAIL PROTECTED] Subject: RE: [PHP-DB] More Apache Installation problems I'd check IP address of your workstation. make sure both the WS and the server are on the same subnet. Your WS should have 192.168 address, too. good luck -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:00 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] More Apache Installation problems
Alex, Your setup will not work like you think. To do what you want you are going to need 2 hubs unless you are doing some sort of NAT on the server. I have this exact same setup and have set up many like it. If you write me directly I can help you out on this, there are a few questions I have to ask that you don't want the answers broadcast over a newsgroup. Jim ---Original Message--- From: Alex Francis Date: Monday, December 09, 2002 12:46:03 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems Adam, You are correct. I had two NICs, set up exactly as you describe, but kept getting problems (I would lose my internet connection and have to reboot to get it back. I think I will try againand if that fails, buy a cable modem router. Adam Williams [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... No I think he has his WS with a real IP from his ISP and then his web server plugged into the same hub as his WS but with 192.168.1.1. He'll either need to get a 2nd NIC and give it an ip like 192.168.1.2 or get a cable modem router. Or change his WS to linux and add eth0:0 with 192.168.1.2 :) Adam On Mon, 9 Dec 2002, Gene Dymarskiy wrote: I am a bit confused. Your WS is connected to cable modem and gets public IP assigned by your ISP. Your WS is also connected to a hub shared with your web server. does it mean you have two network cards, one connected to cable modem, and the other to the hub? -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:20 PM To: Gene Dymarskiy Subject: RE: [PHP-DB] More Apache Installation problems I need to have a server assigned IP address on my workstation for my cable modem. -Original Message- From: Gene Dymarskiy [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 8:06 PM To: Alex Francis; [EMAIL PROTECTED] Subject: RE: [PHP-DB] More Apache Installation problems I'd check IP address of your workstation. make sure both the WS and the server are on the same subnet. Your WS should have 192.168 address, too. good luck -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:00 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php . -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] More Apache Installation problems
what you need to do is have 1 nic going directly to your cable modem using a cross over cable, and then with the 2nd NIC in your WS plug it into the hub along with the web server box, or ditch the hub and connect the WS to the web server with a cross over cable. Adam On Mon, 9 Dec 2002, Alex Francis wrote: Adam, You are correct. I had two NICs, set up exactly as you describe, but kept getting problems (I would lose my internet connection and have to reboot to get it back. I think I will try againand if that fails, buy a cable modem router. Adam Williams [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... No I think he has his WS with a real IP from his ISP and then his web server plugged into the same hub as his WS but with 192.168.1.1. He'll either need to get a 2nd NIC and give it an ip like 192.168.1.2 or get a cable modem router. Or change his WS to linux and add eth0:0 with 192.168.1.2 :) Adam On Mon, 9 Dec 2002, Gene Dymarskiy wrote: I am a bit confused. Your WS is connected to cable modem and gets public IP assigned by your ISP. Your WS is also connected to a hub shared with your web server. does it mean you have two network cards, one connected to cable modem, and the other to the hub? -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:20 PM To: Gene Dymarskiy Subject: RE: [PHP-DB] More Apache Installation problems I need to have a server assigned IP address on my workstation for my cable modem. -Original Message- From: Gene Dymarskiy [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 8:06 PM To: Alex Francis; [EMAIL PROTECTED] Subject: RE: [PHP-DB] More Apache Installation problems I'd check IP address of your workstation. make sure both the WS and the server are on the same subnet. Your WS should have 192.168 address, too. good luck -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 2:00 PM To: [EMAIL PROTECTED] Subject: Re: [PHP-DB] More Apache Installation problems It seems like a network problem. I can access the network through windows network neighborhood but can't ping it, any suggestions? Gene Dymarskiy [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... make sure both your server and workstation can see each other. try pinging the server: ping 192.168.1.1 -Original Message- From: Alex Francis [mailto:[EMAIL PROTECTED]] Sent: Monday, December 09, 2002 1:39 PM To: [EMAIL PROTECTED] Subject: [PHP-DB] More Apache Installation problems At last I have Apache and PHP running on my server. My server IP is 192.168.1.1 and I have set ServerName 192.168.1.1 in my httpd.conf file. I can access my test files from the server using either http://localhost or http://192.168.1.1, however if I try the same on my main workstation I can't find the server. Is there something else I need to do. -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
